Netgear ANT2407, ANT224, ANT24D18 Data Sheet

24/7

TECHNICAL

SUPPORT *

NETGEAR ProSafe® Wireless LAN Antennas and Cables

ProSafe 14 dBi Patch Panel Directional Antenna - ANT24D18
ProSafe 10 dBi 2x2 Indoor/Outdoor Directional Antenna - ANT224D10
ProSafe 9 dBi Omni-directional Antenna - ANT2409
ProSafe 7 dBi Omni-directional Antenna - ANT2407
ProSafe 5 dBi 3x3 Omni-directional Antenna - ANT32405
ProSafe 5 dBi Omni-directional Antenna - ANT2405
ProSafe Low-Loss Antenna Cables

Optimize WLAN Range and Power

NETGEAR’s ProSafe line of antennas and accessories for 802.11b, 802.11g and 802.11n
devices give you multiple options for maximizing the reach and performance of your wireless
infrastructure devices. Every WLAN deployment is unique. When planning a network
that incorporates wireless, varying facility sizes, construction materials, distance between
transmission points and physical obstructions must be accounted for. With both directional and
omni-directional antennas, indoor and outdoor options, low-loss cables, mounting hardware,
and other accessories, installers can customize a wireless solution that meets the requirements
of even the most challenging applications.

Data Sheet

ProSafe 14 dBi Patch Panel
Directional Antenna

ProSafe 10 dBi 2x2
Indoor/Outdoor
Directional Antenna

The ANT24D18 indoor/outdoor directional* 2.4 GHz antenna provides a 3-in-1 solution for
mixed applications in combination with an 802.11b or 802.11g access point or wireless router.
One, it delivers extended access point range in a single floor environment ideally positioned in
the corner of a building. Two, it functions point-to-point so that you can wirelessly connect LANs
between buildings in a campus-type environment. Three, it provides multifloor transmission
when placed on a ceiling, as the higher power output extends the range through typical flooring
materials. Includes several mounting options (fixed wall, wall adjustable, and pole),
cable sold separately.

*Directional: Concentrates transmit and receive radio-frequency energy into a cone, or beam, for higher signal
strength and reception in a single direction.

The ANT224D10 2.4 GHz antenna provides extended range connectivity for point-to­point wireless bridges at wireless 802.11n speeds. With a maximum range of 8.5 KM, the
ANT224D10 enables high speed connections for building-to-building deployments. Additionally,
this antenna can be used indoors for floor-to-floor connectivity or to provide a narrow beam
of coverage. Due to the multiple streams of traffic in the 802.11n specification, this antenna
requires two antenna cables, which are available in a variety of lengths. It includes several
mounting options and comes with wall/pole mounting hardware. Cables are sold separately.

1-888-NETGEAR (638-4327)
Email: [e-mail]

NETGEAR ProSafe Wireless LAN Antennas and Accessories Antennas and Cables

ProSafe 9 dBi Indoor/Outdoor
Omni-directional Antenna

ProSafe 7 dBi
Omni-directional Antenna

ProSafe 5 dBi 3x3
Omni-directional Antenna

The ANT2409 indoor/outdoor 2.4 GHz antenna provides extended point-to-multi-point
coverage for wireless 802.11g devices. Optimal for medium range indoor or outdoor point­to-multi-point applications. Included lightning arrestor (a $90 value) helps prevent damage
due to lightning-induced surges or static electricity in outdoor applications. Typically hung from
crossbars of drop ceilings or on a rooftop, the waterproof and UV resistant ANT2409 includes
wall and pole mounting materials for installation ease; antenna cable and grounding cable
not included.

The ANT2407 indoor Omni-directional 2.4 GHz antenna enables improved coverage for

802.11g devices. Using passive RF shaping and enabling more optimal placement, the
ANT2407 can extend your range and improve your connectivity for 2.4 GHz devices. Integrated
magnets allow for mounting on magnetic surfaces such as file cabinets, white boards, and
ceiling T-bars. Desktop and wall mounting are also possible. With an integrated 1.5 m cable,
the ANT2407 can connect directly to an access point. Includes wall-mounting kit.

The ANT32405 indoor 2.4 GHz antenna is for multiple-input-multiple-output wireless devices
such as 802.11n access points. Using three dipole antennas, the ANT32405 supports 3x3 or
2x3 streams of traffic, as supported by the 802.11n standard. Integrated magnetics enable
optimal placement of the antenna element, offering mounting capabilities on file cabinets,
white boards and ceiling T-bars. Desktop and wall mounting are also possible. With an
integrated 1m cable, the ANT32405 can connect directly to an access point. Includes
wall-mounting kit.

ProSafe 5 dBi
Omni-directional Antenna

The ANT2405 indoor omni-directional** antenna is designed to extend coverage of wireless

802.11b or 802.11g devices. This antenna is especially useful in optimizing coverage when you
want to place your wireless access point or router out of plain view – in a wiring closet or above
a ceiling pad. Locate this antenna at the top of a cubicle, on a ceiling, desktop or wall, where it
is more receptive to radio signals. Ideal placement is on a wall, 2 m high, or on the ceiling
facing the area to cover. Includes mounting brackets, cable sold separately.***

** Omni-directional: Radiates radio-frequency energy equally in all directions for widespread,
all-points deployment.

***NETGEAR recommends use of antenna cable up to 5 m long with the ANT2405 antenna.