Nespresso BNE900 User Manual

CREATISTA PRO
MY MACHINE
EN
Nespresso Breville Creatista Pro
Congratulations on your purchase of the Nespresso Breville Creatista Pro, the machine that allows you to make cafe
quality milk coffees.
EN
1
Packaging Content
Creatista Pro Coffee Machine
Tasting Box of Nespresso
Capsules
Milk Jug
MAX
MIN
Creatista Pro
USER MANUAL
Nespresso is an exclusive system creating the perfect Espresso, time after time. Each parameter has been calculated with great precision to ensure that all the aromas from each capsule can be extracted, to give the coffee body and create an exceptionally thick and smooth crema.
EN
Welcome
CREATISTA PRO
MY MACHINE
Nespresso Welcome Brochure
User Manual
1 x Water Hardness Test Strip, in the User Manual
BNE900 Specifications
220–240 V, 50–60 Hz, 2300 W
19 bar / 1.9 MPa
max
~6.65 kg / 14.7 lbs
2 L / 68 fl.oz
25.1 cm 41.8 cm 49.9 cm
9.8 in 16.5 in 19.6 in
2
EN
Contents
Safety Precautions 4
Machine Overview 7
First Use 8
Drinks Menu 9
Coffee Settings 9
Milk Coffee 11
Regular Coffee 12
Coffee Preparation Tips 13
Daily Cleaning 14
Maintenance 15
Descaling 16
Water Hardness 16
Trouble Shooting 17
Contact Nespresso 19
Disposal and Environmental Protection 19
Limited Guarantee 19
3
Safety Precautions
EN
CAUTION: the safety
precautions are part of the appliance. Read them carefully before using your new appliance for the first time. Keep them in a place where you can find and refer to them later on.
CAUTION: when you see
this sign, please refer to the safety precautions to avoid possible harm and damage.
INFORMATION: when you
see this sign, please take note of the advice for the correct and safe usage of your appliance.
WARNING: When you
see this sign, follow the instructions to avoid electrical risks that could result in injury.
If the cord is damaged, do
not operate the appliance.
The appliance is intended to prepare beverages according to these instructions.
Do not use the appliance for anything other than its intended use.
Do not operate the appliance if it is in an enclosed space, or within a cupboard.
This appliance has been designed for indoor and non-extreme temperature conditions use only.
Protect the appliance from direct sunlight effect, prolonged water splash and humidity.
This is a household appliance only. It is not intended to be used in: staff kitchen areas in shops, offices and other working environments; farm houses; by clients in hotels, motels and other residential type environments; bed and breakfast type environments.
This appliance may be used by children of at least 8 years of age, as long as they are supervised and have been given instructions about using the appliance safely and are fully aware of the dangers involved. Cleaning and user maintenance shall not be made by children unless they are older than 8 and they are supervised by an adult.
Keep the appliance and its cord out of reach of children under 8 years of age.
This appliance may be used by persons with reduced physical, sensory or mental capabilities, or whose experience or knowledge is not sufficient, provided they are supervised or have received instruction to use the appliance safely and understand the dangers.
Children shall not use the device as a toy.
The manufacturer accepts no responsibility and the warranty will not apply for any commercial use, inappropriate handling or use of the appliance, any damage resulting from use for other purposes, faulty operation, non-professionals repair or failure to comply with the instructions.
Avoid risk of fatal
electric shock and fire.
In case of an emergency: immediately remove the plug from the power socket.
Only plug the appliance into suitable, easily accessible, earthed mains connections. Make sure that the voltage of the power source is the same as that specified on the rating plate. The use of an incorrect connection voids the warranty.
4
EN
Safety Precautions
The appliance must only be connected after installation.
Do not pull the cord over sharp edges, clamp it or allow it to hang down.
Keep the cord away from heat and damp.
If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons, in order to avoid all risks.
If the cord is damaged, do not operate the appliance; return the appliance to Nespresso or to a Nespresso authorised representative.
If an extension cord is required, use only an earthed cord with a conductor cross-section of at least 1.5 mm2 or
5
matching input power.
To avoid hazardous damage, never place the appliance on or beside hot surfaces such as radiators, stoves, ovens, gas burners, open flame, or similar.
Always place it on a horizontal, stable and even surface. The surface must be resistant to heat and fluids, like water, coffee, descaler or similar liquids.
Disconnect the appliance from the mains when not in use for a long period. Disconnect by pulling out the plug and not by pulling the cord itself or the cord may become damaged.
Before cleaning and servicing, remove the plug from the mains socket and let the appliance cool down.
Never touch the cord with
wet hands.
Never immerse the appliance or part of it in water or other liquid.
Never put the appliance or part of it in a dishwasher.
Electricity and water together is dangerous and can lead to fatal electrical shocks.
Do not open the appliance. Hazardous voltage inside!
Do not put anything into any openings. Doing so may cause fire or electrical shock!
Avoid possible harm when operating the appliance.
If coffee volumes are programmed higher than 150ml (5 oz); allow the machine cool down for 5 minutes before making next coffee to prevent risk of overheating!
Never leave the appliance
unattended during operation.
Do not use the appliance if it is damaged or not operating perfectly. Immediately remove the plug from the power socket. Contact Nespresso or Nespresso authorised representative for examination, repair or adjustment.
A damaged appliance can cause electrical shocks, burns and fire.
Always completely close the handle and never open it during operation. Scalding may occur.
Do not put fingers under coffee outlet, risk of scalding.
Do not put fingers into capsule compartment or the capsule shaft. Danger of injury!
Do not touch the capsule compartment just after
Safety Precautions
EN
brewing due to risk of scalding. Water could flow around a capsule when not perforated by the blades and damage the appliance.
Never use a damaged or deformed capsule. If a capsule is blocked in the capsule compartment, turn the machine off and unplug it before any operation. Call Nespresso or Nespresso authorised representative.
Misuse may result in injury.
Fill the water tank only with fresh and potable water.
Empty water tank if the appliance will not be used for an extended time (holidays, etc.).
Replace water in water tank when the appliance is not operated for a weekend or a similar period of time.
Do not use the appliance
without the drip tray and drip grid to avoid spilling any liquid on surrounding surfaces.
Do not use any strong cleaning agent or solvent cleaner. Use a damp cloth and mild cleaning agent to clean the surface of the appliance.
To clean machine, use only clean cleaning tools.
Do not use abrasive material that might damage the surface of the equipment.
When unpacking the machine, remove the plastic film and dispose.
This appliance is designed for Nespresso coffee capsules available exclusively through Nespresso or your Nespresso authorised representative.
This equipment is specific for cow milk, not to use with other products/alternative
milk (soya milk, oat milk, almond milk), therefore it is not fit for lactose intolerants or milk allergics.
All Nespresso appliances pass stringent controls. Reliability tests under practical conditions are performed randomly on selected units. This can show traces of any previous use.
Nespresso reserves the right to change instructions without prior notice.
This machine contains magnets.
Descaling
Nespresso descaling agent, when used correctly, helps ensure the proper functioning of your machine over its lifetime and that your coffee experience is as perfect as the first day.
SAVE THESE INSTRUCTIONS Pass them on to any subsequent user. This instruction manual is also available as a PDF at nespresso.com
6
EN
ENEN
Machine Overview
Power button
LCD touch screen
Lever for capsule insertion
Capsule container
Pop out cup suppor t
Removable drip grid
Drip tray baffle
Removable drip tray with full indicator
77
Easy clean steam wand
Milk jug temperature sensor
Milk jug
Removable pin cle aning tool
Power button Press to turn machine ON / OFF
LCD touch screen
- Swipe to navigate
- Tap to select
Water tank & lid
First Use
Read and safely disgard any packaging materials or promotional labels attached to your machine before use.
Read the important safeguards first to avoid risks of fatal electrical shock and fire.
EN
Plug the machine into
the power outlet.
Follow on-screen
instructions for machine
set up.
First use cycle is to rinse the machine and prime the heating system.
Turn the machine ON by pressing the
Power button.
Follow the on-screen
Quick Start Guide.
Water Hardness can
be manually set or the default can be used. The setting can be adjusted in the menu.
Tap to select
your language.
To turn OFF your machine,
press the Power button. Any drink recipe can be interrupted by turning the machine off.
8
EN
Drinks Menu & Selection
Drink Menu Drink Confirmation
Menu
Hot Wate r
Tap to manually start and stop. Max. 200 mls (6.5 fl. oz)
Swipe up and down
on the touch screen to navigate the menu.
Tap the screen
to select.
Exit
Coffee
Settings
Milk
Settings
Hot Wate r
Tap to Start
Drink Adjustments
9
Drink Adjustments
Adjust Coffee Volume Adjust Milk Froth Level Adjust Milk Temp erat ure
CloseSave Close CloseSave
EN
Slide circle up
and down the
bar to adjust. Notch on the bar is the drink default setting.
Adjustment
Slider
Adjustment
Slider
Adjustment
Slider
Tap
your custom drink settings. Custom drink will appear in Drinks Menu.
to save
10
EN
Making a Milk Coffee
Drink Running Drink Complete
Exit Exit
Coffee extraction and milk texturing will start simultaneously.
Coffee and milk will stop running automatically.
Alternatively, tap the icon to stop.
Coffee
Running
Milk
Running
Add Cof fee
(insert new capsule
and extract again)
Milk
Complete
Hot Wate r
Tap to manually start and stop.
Next
Close
Update Save
Information
Delete
Icons
Back
Skip
Menu
Save
Waiting
11
Making a Regular Coffee
Drink Confirmation Drink Running Drink Complete
EN
Hot Wate r Hot Wate rExit
ExitExit
Coffee will stop running automatically.
Alternatively, tap the icon to stop.
Coffee
Settings
Coffee
Running
Add
Coffee
(insert new capsule
and extract again)
12
EN
Coffee Preparation Tips
To ensure hygienic conditions, it is highly recommended not to reuse a used capsule.
For optimal milk froth, use pasteurised whole or semi skimmed milk at refrigerated temperature (about 4-6 °C / 39-43 °F ).
For smaller cups, use the
cup support.
MAX
MIN
CAUTION: Do not fill milk jug above the maximum level marked on the inside & outside of the jug.
Only use the milk
jug provided for texturing milk.
Adjusting Regular / Milk Coffee Drinks
Regular Coffee Coffee Volume
Ristretto From 10 to 30 ml / 0.35 - 1 fl. oz
Espresso From 30 to 70 ml / 1 - 2.3 fl. oz
Lungo
From 70 to 130 ml / 2.3 - 4.4 fl. oz
Milk Coffee Settings
Coffee Volume 7 levels from 15 to 130 ml / 0.5 - 4.4 fl. oz
Hot Water Volume 7 levels from 50 to 200 ml / 1.7 - 6.8 fl.oz
Milk Temperature 11 levels from 50° to 76°C / 122° to 169°F
Milk Froth 8 levels from 2 to 30mm
Flat White
Min
Always ensure the milk jug
is positioned on the drip tray temperature sensor when texturing milk.
Milk Levels
Cafe Latte
Cappuccino
Min
Min
Latte
Macchiato
Max
13
Daily Cleaning
Do not use any strong or abrasive solvent, sponges or cream cleaners when cleaning. Do not put any parts in the dishwasher.
Never immerse the appliance or any part of it in water or any other liquid
EN
Select Clean Steam Wand from the MENU
and follow the on-screen steps
Rinse and dry the milk jug after each use.
If required, use a mild detergent.
Empty the drip tray and capsule container
every day. Remove and clean the cup support
and wipe inside the machine. Remove and clean the water tank with an odorless detergent and rinse with warm water.
Dry all parts with a soft clean cloth and
reassemble machine. Wipe coffee outlet and machine regularly with a clean damp cloth.
14
EN
Menu
Tap to select and follow the on-screen instructions.
Clean Steam Wand
Complete daily to clean steam paths, steam wand and prevent blockages.
Rinse Steam Wand
Use as required to clear any blockages that may occur in the steam wand.
Descale
Remove any scale build-up. Refer to Descale instructions on following page.
Water Hardness
Reset the water hardness level.
Rinse Cycle
When machine hasn’t been used for an extended period of time.
Empty Cycle
When storing machine for a period of non-use or for frost protection.
Quick Start Guide
See the Quick Start guide again.
Language
Change the language of the machine.
15
Factory Reset
Erases all settings and returns unit to factory settings.
Descaling
Duration approximately 15 minutes.
Read the important safeguard on the descaling package and refer to the table for the frequency of use.The descaling solution can be harmful. Avoid contact with eyes, skin and surfaces.
Never use any product other than the Nespresso descaling kit available at Nespresso to avoid damage to your machine. The following table will indicate the descaling frequency required for the optimum performance of your machine, based on water hardness. For any additional questions you may have regarding descaling, please contact Nespresso.
Descaling: Removes scale build-up, maintains coffee taste and prevents machine damage. Frequency will depend on your water hardness and amount of use. Descale when prompted on-
screen. The machine will stop you from use if the descale cycle has not been performed after 30 uses. A "lockout" count-down will appear to alert you of the number of uses remaining until usage will stop.
Navigate to the Menu
and select Descale. Follow the on-screen instructions.
Water Hardness Levels
EN
Water hardness: Descaling after:
App. fH dH CaCO
< 5 < 3 < 50 mg/l 2 200
Level 0
> 7 > 4 > 70 mg/l 1 800
Level 1
> 13 > 7 > 130 mg/l 1 400
Level 2
Level 3
Level 4
> 25 > 14 > 250 mg/l 1 000
> 38 > 21 > 380 mg/l 600
3
(40 ml)
CaCO
fH
French degree
dH
German Grade
3
Calcium Carbonate
16
EN17EN
Troubleshooting
Screen / buttons not illuminated.
No steam or hot water.
No coffee, no water, unusual coffee flow.
Coffee is not hot enough.
The capsule lever does not close completely.
Leakage (water under the machine).
No coffee flow, water goes directly into the capsule bucket (despite inserted capsule).
Display is dim and hard to see/read.
Fill Water Tank prompt remains on screen (water tank is full).
Descale alert is displayed.
Machine is ON but ceases to operate.
Touchscreen is not working.
Touch screen is in instore mode.
- Machine turns OFF automatically.
- Press POWER button to turn machine ON.
- Machine is OFF. Press POWER button to turn machine ON. - Check the outlet: plug, voltage, fuse.
- Check if the water tank is correctly positioned, if empty, fill with fresh, potable water.
- Preheat cup using hot water button. - Descale the machine, if necessary.
- Empty the capsule container. - Check that capsules aren't blocking inside the machine. (Note: do not
- Empty drip tray if full.
- Check drip tray is securely inserted.
- Ensure capsule lever is closed. - Empty capsule bucket and check that no capsule is blocked inside the
- Screen brightness is set on a low setting.
- Press POWER button to turn ON.
- Check if the water tank is correctly positioned. - If problem persists, call Nespresso.
- Descale the machine. - Navigate to the Menu and select Descale. Follow on-screen prompts.
- Press POWER button to turn machine OFF.
- Wait 60 minutes and press POWER button to turn machine ON.
- Press POWER button to turn machine OFF. Press POWER button again to turn machine ON.
- To exit instore mode, press POWER button to turn machine OFF. Press POWER button again to turn machine ON.
- Check the outlet: plug, voltage, fuse.
- Descale the machine, if necessary.
place fingers inside the machine)
- If problem persists, call Nespresso.
machine. (NOTE: do not place fingers inside the machine) If problem persists, call the Nespresso.
- Adjust the screen brightness setting. Navigate to Menu and select Screen Brightness.
- If problem persists, call Nespresso.
- If problem persists, call Nespresso.
Troubleshooting Milk Froth Preparation
EN
Milk steam cycle does not start.
Quality of froth not up to standard.
Steam is very wet.
Milk overflows.
Milk temperature is too hot.
Milk temperature is not hot enough.
Clean Steam Wand alert is displayed.
- Check if the water tank is correctly positioned, if empty, fill with fresh potable water.
- Check steam tip for any blockages and ensure wand is lowered.
- Be sure to use pasteurised whole or semi-skimmed milk at refrigerated temperature (about 4-6 °C / 39-43° F). For a better result, the milk should be newly opened.
- Check the milk froth setting.
- Use fresh, potable water. Do not use highly filtered, demineralised or distilled water.
- Fill jug with appropriate milk volume. DO NOT fill above the MAX level.
- Minimum and maximum levels are marked on the inside and outside of the jug.
- Use the milk jug provided.
- Check the milk jug is positioned correctly on the milk jug temperature sensor in the drip tray.
- Check the temperture sensor in the drip tray is dry and clean.
- Preheat cup.
- Use the provided milk jug.
- Check the milk jug is positioned on the temperature sensor in the drip tray.
- Clean the steam wand. - Navigate to the Menu and select Clean Steam Wand. Follow the on-screen
- Use the provided milk jug.
- Clean both the milk jug and steam wand after each use.
- Complete Steam Wand Cleaning Cycle. Navigate to the Menu and select Clean Steam Wand, follow the on-screen prompts.
- To stop overflow, either reduce the initial volume of milk and/or reduce the froth level. This varies depending on milk type.
- Decrease the milk temperature setting
- Increase the milk temperature setting.
- Check the steam tip for blockages.
prompts.
18
EN
Contact Nespresso
Disposal and Environmental Protection
As we may not have foreseen all uses of your appliance, should you need
any additional information, in case of problems or simply to seek advice, call Nespresso or your Nespresso authorized representative. Contact details for Nespresso or your Nespresso authorized representative can be found in the «Welcome to Nespresso» folder in your machine box or at nespresso.com
Your appliance contains valuable materials that can be recovered or can
be recyclable. Separation of the remaining waste materials into different types facilitates the recycling of valuable raw materials. Leave the appliance at a collection point. You can obtain information on disposal from your local authorities.
Limited Guarantee
Breville guarantees this product against defects in materials and workmanship for two years domestic use (or 3 months commercial use) from the date of purchase.
During this period, Breville will either repair or replace, at its discretion, any defective product at no charge to the consumer. In the event of a product or accessory being repaired or replaced during the guarantee period, the guarantee on the repaired product will expire two years from the purchase date of the original product, not two years from the date of repair. This guarantee excludes liability for consequential loss or any other loss or damage caused to property or person arising from any cause whatsoever. It also excludes defects caused by the product not being used in accordance with instructions, accidental damage, misuse, being tampered with by unauthorised persons, improper maintenance, consumable items or normal wear and tear and does not cover the cost of claiming under the warranty.
In Australia, our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.
How to Claim Under the Breville Warranty
Nespresso is handling product enquiries and product servicing on Breville’s behalf. If you believe your product is defective, contact the Nespresso customer service team directly for instructions on where to send or bring it for repair by a Breville authorised service agent. Contact Nespresso Australia: 1800 623 033 or New Zealand: 0800 234 579 nespresso.com.
This product is imported and distributed by Breville and this warranty is provided by Breville. To the extent permitted by law, Nespresso has no liability for the product and all guarantees, warranties and conditions by Nespresso are excluded.
19
Notes
EN
20
EN
Notes
21
CREATISTA PRO
by Nespresso
D19
Loading...