Page 1
CREATISTA UNO
MY MACHINE
Page 2
EN
User manual 3
1
Page 3
•
EN
Nespresso Breville Creatista Uno
Congratulations on your purchase of the Nespresso Breville Creatista Uno, the machine that allows you to make cafe quality
milk coffees.
2
Page 4
EN
Packaging Content
❶ Creatista Uno Coffee Machine
Creatista Uno
USER MANUAL
Nespresso is an exclusive system creating the perfect Espresso, time after time.
Each parameter has been calculated with great precision to ensure that all the
aromas from each capsule can be extracted, to give the coffee body and create
an exceptionally thick and smooth crema.
❷ Tasting Box of Nespresso Capsules
the important safeguards to avoid possible harm and
damage.
CAUTION: When you see this sign, please refer to
INFORMATION: when you see this sign, please take note of the advice for
the correct and safe usage of your coffee machine.
❸ Milk Jug
MAX
MIN
Welcome
❹ Nespresso Welcome Brochure
BNE500 Specifications/
techniques
❺ User Manual
CREATISTA UNO
MY MACHINE
1 x Water Hardness Test Strip, in the User Manual
3
220-240 V, 50-60 Hz, 1300-1600 W
19 bar / 1.9 MPa
max
~4.52 kg / 9.94 lbs
1.5 L / 50 fl.oz
17 cm 30.9 cm 40.9 cm
6.7 in 12.2 in 16.1 in
Page 5
Content
Nespresso Creatista Uno 2
Packaging Content 3
Creatista Uno 3
Specications 3
Safety Precautions 5-7
Machine Overview 8
First Use 9-10
Regular Coffee Preparation 11
Milk Coffee Preparation 12-13
Latte Macchiato Preparation 14-15
Adjusting Regular Coffee Drinks 16
Reset to Factory Settings 16
Emptying the System 17
Energy Saving 18
Daily Cleaning 18-19
Steam Wand Cleaning 20
Descaling 21-22
Water Hardness 23
Troubleshooting 24
Troubleshooting Milk Froth Preparation 25
Contact Nespresso Club 26
Disposal and Environmental Protection 26
Limited Guarantee 27
EN
4
Page 6
EN
Important Safeguards
WARNING
CAUTION
When using electrical appliances,
basic important safeguards should
always be followed, including the
following:
•
Read all instructions.
•
Do not use outdoors.
•
Do not let cord hang over edge of table
or counter, or touch hot surfaces.
•
This appliance is intended to be used in
household environment only.
•
The appliance is intended to prepare
beverages according to these
instructions.
•
This appliance should only be used for
intended purpose.
•
Do not operate the appliance if it is in an
enclosed space, or within a cupboard.
•
This appliance is only meant for indoor
use, under non-extreme temperature
conditions.
•
The appliance must not be used,
cleaned, or maintained by children
under 8 years of age unless supervised,
instructed by an adult on how to use
the appliance safely, and fully informed
regarding the dangers involved.
5
Is used to alert you to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death.
Indicates a hazardous situation which, if not avoided, could result in death or serious injury.
Indicates a hazardous situation which, if not avoided, could result in minor or moderate injury.
Is used to provide important information not related to personal injury. When you see this sign, please take note of the advice for the correct
and safe use of your appliance.
•
This appliance may be used by
persons with reduced physical,
sensory or mental capabilities, or
whose experience or knowledge is not
sufficient, provided they are supervised
or have received instruction to use
the device safely and understand the
dangers.
Avoid risk of fatal electrical shock
and fire
•
If the supply cord is damaged, it must
be replaced by the manufacturer, its
service agent or similarly qualified
persons.
•
Do not operate any appliance with
a damaged cord or plug or after the
appliance malfunctions, or has been
damaged in any manner. Return
appliance to the nearest authorised
service facility for examination, repair or
adjustment.
•
If the cord is damaged, do not
operate the appliance. Only return the
appliance to the Nespresso Club or to a
Nespresso authorised representative.
•
To disconnect, turn any control to "off",
then remove plug from wall outlet.
•
To avoid hazardous damage, never
place the appliance on or beside hot
surfaces such as radiators, stoves,
ovens, gas burners, open flames, or
simila r.
•
Do not touch hot surfaces. Use handles
or knobs.
•
Unplug from outlet when not in use and
before cleaning. Allow to cool before
putting on or taking off parts, and
before cleaning the appliance.
•
Never immerse the cord, plug,
appliance or any part of it in water or
any other liquid.
•
Electricity and water together are
dangerous and can lead to fatal electric
shocks.
•
Do not put anything else than specified
capsules into any openings, doing so
may cause fire or electric shock!
•
The use of accessory attachments
not recommended by the appliance
manufacturer may result in fire, electric
shock, or injury.
•
Do not use the machine without the
drip tray fitted.
Avoid possible harm when operating
the appliance
•
Risk of scalding by hot liquids. If the
machine is forced open hot liquids and
coffee grounds may splash. Always lock
the system completely and never open
it during operation.
•
Be careful, capsule is hot. Risk of
scalding. If a capsule is blocked in
the capsule compartment, turn the
machine off and unplug it before any
operation. Call the Nespresso Club or
Nespresso authorised representative for
assistance.
SAVE THESE
INSTRUCTIONS
Pass them on to any
subsequent user.
This User Manual is also
available as a PDF file at
nespresso.com
Page 7
Other Safeguards
ENEN
When using electrical appliances,
basic Important Safeguards should
always be followed, including the
following:
•
The important safeguards are part
of the appliance. Read the important
safeguards provided with the
appliance carefully prior to first use.
Keep them in a place where you can
find and refer to them in the future.
•
Protect the appliance from direct
sunlight, water splash and humidity.
•
This appliance is designed for
domestic use only.
•
Close supervision is necessary when
the appliance is used by or near
children.
•
Children shall not play with the
appliance.
•
The manufacturer accepts no
responsibility for and the warranty
will not apply to any commercial use,
inappropriate handling or use of the
appliance, damage resulting from use
for other purposes, faulty operation,
non-professional repairs or failure to
comply with the instructions.
Avoid risk of fatal electrical shock
and fire
•
In case of emergency: immediately
remove the plug from the power
outlet.
•
Only plug the appliance into suitable,
easily accessible, grounded outlets.
Make sure that the voltage of the
power source is the same as that
specified on the rating plate. The use
of an incorrect voltage or frequency of
electricity voids the warranty.
•
The appliance must only be
connected after installation.
•
Do not pull the cord over sharp
edges, clamp it or allow it to hang
down.
•
Keep the cord away from heat and
moisture.
•
If an extension lead is required, use
only a grounded power cord with
a conductor cross-section with
matching input 14 AWG (2.08 mm
•
Always place the appliance on
a horizontal, stable, hard, even
surface that does not allow for water
accumulation under the machine.
•
The surface must be resistant to heat
and fluids, like water, coffee, descaler
or si mi lar.
•
Disconnect the appliance from the
power outlet when not in use for a
long period of time.
•
Disconnect by pulling out the plug;
do not pull on the cord itself to avoid
damage.
•
Never touch the cord with wet hands.
•
Never put the appliance or part of it in
a dishwasher.
•
Do not open the appliance.
Hazardous voltage inside!
•
Do not dismantle the appliance.
•
Do not put in the dishwasher, and do
not immerse into water for cleaning
purposes.
Avoid possible harm when operating
the appliance
•
Never leave the appliance unattended
during operation.
•
Caution should be exercised when
plugging in the coffee machine with
2
the button pressed as the machine
).
evacuates remaining liquids using
heat. Small quantities of steam may
pour out of the machine.
•
Do not use the appliance if it is
damaged or not operating perfectly.
Immediately remove the plug from the
power outlet.
•
Contact the Nespresso Club or
Nespresso authorised representative
for examination, repair or adjustment.
•
A damaged appliance can cause
electric shocks, burns and fire.
•
Do not put fingers under coffee or
steam wand outlet; risk of scalding.
•
Do not put fingers into the capsule
compartment or capsule shaft; risk
of injury!
•
Water could flow around a capsule
when not perforated by the blades
and damage the appliance.
•
Be careful not to injure yourself on
sharp points or trap your fingers
when reaching inside the machine.
•
Beware of hot liquids when reaching
inside the machine.
•
Never use a damaged or deformed
capsule.
•
Always fill the water tank with fresh
potable water.
•
Do not overfill water tank.
•
Empty water tank if the appliance will
not be used for an extended period of
time (holidays, etc.).
•
Replace water in water tank when the
appliance is not operated during a
weekend or a similar period of time.
6
Page 8
EN
Other Safeguards
•
Do not use the appliance without
a cup placed at the suitable cup
support level and ensure the cup
support is in place after any usage,
to avoid spilling any liquid on
surrounding surfaces.
•
Do not use any strong cleaning agent
or solvent cleaner.
•
Use a damp cloth and mild cleaning
agent to clean the surface of the
appliance.
•
Do not use a steam or pressure
cleaner to clean the appliance. This
will damage the appliance and may
create a life-threatening hazard.
•
This appliance is designed for
Nespresso coffee capsules available
exclusively through the Nespresso
Club or your Nespresso authorised
representative.
•
For your own safety, you should use
only parts and appliance accessories
from Nespresso that are designed for
your appliance.
•
All Nespresso appliances pass
stringent controls.
•
Reliability tests under practical
conditions are randomly performed
on selected units. Some units can
therefore show traces of previous
use.
•
Nespresso reserves the right to
change instructions without prior
notice.
•
Use cold milk for better quality froth.
•
Recommend using fresh cold milk.
Short cord instructions
•
The appliance is provided with an
attached cord having a length less
than 4 1/2 feet (1.4 meters).
•
Use the power cord supplied with
the device in an unmodified form. It
is important for user safety that the
appliance is only used with a suitably
grounded electrical supply.
a) A short power supply cord or
detachable power supply cord is to
be provided to reduce risks resulting
from becoming entangled in or
tripping over a longer cord.
b) Extension cords are available and
may be used if care is exercised in
their use.
c) If a long detachable power cord or
extension cord is used:
1) The marked electrical rating
or the detachable power cord or
extension should be at least as
great as the electrical rating of the
appliance,
2) The appliance is grounded and
only grounded extension cord
should be used (type 3-wire cord).
3) The longer cord should be
arranged so that it will not dangle
over the countertop or tabletop,
where it can be pulled on by
children or tripped over.
•
The appliance has a grounded plug
(two blades and one round pin) .
•
To reduce the risk of electric shock,
this plug is intended to fit into a
grounded outlet only one way.
•
Do not attempt to modify the plug in
any way.
•
Do not pour water or other liquids into
the brewing unit.
•
Keep appliance, capsules and
accessories out of reach of children.
Descaling
•
Nespresso descaling agent, when
used correctly, helps to ensure the
proper functioning of your machine
over its lifetime and that your coffee
experience is as perfect as on the
first day.
•
For coffee and coffee&milk
machines, descale according to user
manual recommendations or specific
alerts.
7
Page 9
Machine Overview
Control panel
Lever for capsule insertion
Capsule container
Pop out cup support
Removable drip grid
Removable drip tray
with full indicator
Desca le aler t LED
Removable pin cleaning tool
Control Panel
Water tank & lid
Steam wa nd clean alert L ED
EN
EN
Easy clean steam
wand
Milk jug temperature
sensor
Milk jug
Lungo button
Espresso button
Ristre tto but ton
Milk temperature button
Milk froth level bu tton
Steam button
8
Page 10
EN
First Use
Read the important safeguards first to avoid risks of fatal electrical shock and fire.
1
Rinse the water tank
before filling it with
potable water.
4
Plug the machine into
the power outlet.
5
Turn the machine ON by pressing
the Lungo, Espresso, Ristretto, or
Steam button. The buttons will flash
while the machine heats up. Heating
up takes approximately 3 seconds.
The Lungo button will illuminate once
heated.
2
Fill the water tank
with potable water.
Please ensure ground continuity when plugging the machine in the power outlet.
3
Place the water tank, insert
the drip tray and the capsule
container in position. For your
safety, operate the machine
only with drip tray and
capsule container in position.
6
Place empty jug under the coffee outlet.
Press Lungo button to begin cycle. Once
done, discard the liquid from the jug.
Rinse the jug.
First use is to rinse the machine &
prime the heating system.
9
Page 11
First Use
< 1 minute
7
Setting your water hardness, dip the Water Hardness Test Strip in and out of the
water tank. Wait 1 minute. Press and hold the temperature button and the milk froth
level button for 5 seconds to set the water hardness level. Pressing temperature button
increases the level and pressing milk froth button decreases the level. Set the water
hardness according to the results on the Test Strip. For further information refer to page
28. Press any button not blinking to save and exit.
8
To turn OFF your machine, press and hold the Ristretto and Steam
buttons together for 0.5 second until machine is off. Steam wand
purges when the machine turns off.
EN
10
Page 12
EN
Regular Coffee Preparation
1
Fill the water tank
with potable water.
4
Lift the Lever, insert a capsule and close the lever.
Press one of the coffee buttons to extract.
Ristretto (25 ml / 0.85 fl.oz)
Espresso (40 ml / 1.35 fl.oz)
Lungo (110 ml / 3.7 fl.oz)
To ensure hygienic conditions, it is highly
recommended to not reuse a used capsule.
2
Turn the machine ON by
pressing Ristretto, Espresso,
Lungo, or Steam button. The
buttons will flash while the
machine heats up. Heating up
takes approximately 3 seconds.
5
Preparation will stop automatically
or press the coffee button before
completing the extraction, to stop the
coffee flow.
3
Place a cup under the
coffee outlet. Use the cup
support if required. PUSH
the cup support to unlock.
11
Page 13
Milk Coffee Preparation
Only use the milk jug provided.
EN
TIP: This machine is optimised for pasteurised whole or semi skimmed milk, refrigerated & freshly opened.
Milk Temperature and Milk Froth may be adjusted to suit different milk types.
1
Fill the water tank
with fresh potable
water.
4
Lift the steam wand
& position in the centre
of the milk jug.
2
To accommodate smaller
cups, use the cup support.
PUSH the cup support to
unlock.
5
Ensure the milk jug
is making contact
with the temperature
sensor located in the
drip tray.
MAX
MIN
CAUTION: Do not fill milk jug above
the maximum level marked on the
inside & outside of the jug.
3
Fill the milk jug with
enough fresh cold
milk from the fridge.
Minimum and maximum
levels are marked on
the inside and outside
of the milk jug.
6
Lift the Lever &
insert your capsule.
And close the lever.
12
Page 14
EN
Milk Coffee Preparation
7
Press one of the coffee
buttons to start the coffee
extraction.
10
When milk frothing is
complete, lift the steam wand,
remove the jug and wipe with
a clean damp cloth.
8
When the coffee extraction is complete,
select milk setting for your preferred drink.
3
2
1
3
2
Milk Temperature Setting
1 = cool
2 = ideal
3 = hot
Milk Froth Level Setting
1 = Flat White
2 = Cappuccino
3 = Latte Macchiato
9
Start milk frothing by
pressing steam button.
1
11
Allow steam wand to return
to its down position & it will
auto purge to rinse itself.
12
Pour milk into the coffee
to finish your drink.
13
Page 15
Latte Macchiato Preparation
EN
1
Fill the water tank
with fresh potable
water.
4
Set milk froth level at 3 and
temperature level at 2.
3
2
To accommodate a Latte
Macchiato glass, push the
cup support in until it locks.
5
Ensure the milk jug is
making contact with
the temperature sensor
located in the drip tray.
MAX
MIN
2
3
Fill the milk jug to the marked maximum
level with fresh cold milk from the fridge.
CAUTION: Do not fill milk jug above the
maximum level marked on the inside &
outside of the jug.
6
Lift the steam wand &
position in the centre of
the milk jug and press the
Steam button to begin milk
frothing.
1
3
2
1
14
Page 16
EN
Latte Macchiato Preparation
7
When milk frothing is
completed, lift the steam
wand, wipe with a clean
damp cloth.
CAUTION: Jug surface gets hot. Use
the handle to lift the jug.
10
Place the Latte Macchiato
glass under the coffee
spout.
8
Allow steam wand to return to
its down position & it will auto
purge to rinse itself.
11
Lift the Lever & insert
your capsule. And close
the lever.
9
Pour milk into the Latte
Macchiato glass.
Rinse the jug.
12
Press the Espresso button to
start the coffee extraction.
15
Page 17
Adjusting Regular Coffee Drinks
EN
1
Lift the Lever & insert
your capsule. Press
and hold one coffee
button you want to
adjust among Ristretto,
Espresso, and Lungo.
Reset to Factory Settings
1
To reset factory settings:
1. Turn the machine ON.
2. Press and hold the Lungo button and the Ristretto
button for 5 seconds.
3. Press the Lungo button or the Ristretto button to
confirm. Press any button not blinking to exit the mode.
4. After a Factory Reset, the machine will restart in the
Ready Mode.
2
Release the button after
desirable shot duration.
3
Adjusted coffee volume will be saved for
next use.
Any coffee can be programmed
1. Ristretto: 15-30ml / 0.5-1oz
2. Espresso: 30-70ml / 1-2.3oz
3. Lungo: 70-130ml / 2.3-4.4oz
Default coffee volumes listed on page 11.
16
Page 18
EN
Emptying the System before a period of non-use or for frost protection
1
Turn off the machine
by pressing and holding
Ristretto button and
Steam button together for
0.5 seconds.
4
Press the Espresso button
or the Lungo button to start
emptying cycle. Press any
button not blinking to exit the
mode.
2
Remove the water tank.
Place the empty Milk Jug
under the coffee outlet.
5
When the pump stops, empty
& wipe dry the capsule bucket
& drip tray.
3
Press and hold the
Espresso button and the
Lungo button together for
5 seconds.
17
Page 19
Energy Saving
Daily Cleaning
To ensure hygienic conditions, it is highly recommended emptying and cleaning the capsule container every day.
EN
1
Energy efficient: Machine minimises power
use when not making a drink. After 10 mins
of no use, the machine enters sleep mode.
Restart by pressing Ristretto, Espresso, Lungo,
or Steam button.
2
Rinse the milk jug & dry
after each use. If required,
wash the jug with mild
detergent. The jug is
dishwasher safe.
1
Empty the drip tray and the capsule container every day. Remove cup support
by first removing the capsule bucket, then unlocking the cup support, pulling the
cup support forward & lifting it upwards to disengage from the machine. Clean cup
support and wipe inside machine with a clean damp cloth. Remove the water tank
and lid and clean them both with odourless detergent and rinse with warm water.
Refill the water tank with fresh potable water.
Drip tray, grid, cup support, and capsule bucket are not dishwasher safe.
3
Fill the milk jug with potable water
between the min & max marks. Press the
Steam button to start steaming. When
MAX
MIN
complete discard the hot water, then wipe
the steam wand with a clean damp cloth.
18
Page 20
EN
Daily Cleaning
4
Do not use any strong or
abrasive solvent, sponge or
cream cleaner. Do not put the
parts in the dishwasher. Only
the milk jug is dishwasher
safe.
5
Dry all the parts with a soft
clean cloth and reassemble
all parts. Clean the coffee
outlet and inside the machine
regularly with a clean damp
cloth.
6
Never immerse the
appliance or part of it in
water or any other liquid.
19
Page 21
Steam Wand Cleaning
It is recommended that you perform this monthly to prevent steam tip blockages or when the steam wand clean alert LED is on.
When it flashes, do manual steaming by pressing and holding the Steam button for 3 seconds.
EN
1
4
Use the pin
cleaning tool
to remove the
steam tip cap.
Remove the pin
cleaning tool
located in the back
of the machine,
under the water
tank.
5
Rinse the steam tip and
cap to remove any milk
residue, then wipe them with
a clean dry cloth. Inspect the
seals for damage. Do not put
these parts in the dishwasher.
2
Unscrew and remove
the steam tip.
6
Reassemble steam
tip and return it onto
the steam wand.
3
Use the pin cleaning tool to clear
each hole of the steam tip.
7
Put the pin
cleaning tool and
water tank back in
place. Press and hold
the Steam button for
3 seconds to begin
steam purge.
20
Page 22
EN
Descaling
Duration approximately 15 minutes
Read the important safeguard on the descaling package and refer to the table for the frequency of use.The descaling solution can be harmful. Avoid contact with eyes, skin and surfaces. Never
use any product other than the Nespresso descaling kit available at the Nespresso Club to avoid damage to your machine. The following table will indicate the descaling frequency required for the
optimum performance of your machine, based on water hardness. For any additional questions you may have regarding descaling, please contact the Nespresso Club.
Descaling: Removes scale build-up, maintains coffee taste and prevents machine damage. Frequency will depend on your water hardness &
amount of use. The descale alert LED will flash when descaling is due. If you continue to use the machine, the descale alert LED will switch to solid
on, after which, the machine will not function until descaling is performed.
21
1
Open and close the capsule
lever to remove any used
capsule. Empty and clean
capsule bucket, drip tray and
water tank. And put them
back on the machine.
2
Ensure there is 500ml / 17
fl.oz. of water and drip tray
is inserted. Place descaling
agent in the water.
3
Place a 1L / 34 fl.oz. container under
the coffee outlet and steam wand.
Page 23
Descaling
EN
4
Make sure the machine is off. Press
and hold the Ristretto button and the
Steam button together for 5 seconds to
enter the descaling mode. The Ristretto
and the Steam buttons will be solid on.
Press any button not illuminated to exit
the mode. Press the Ristretto button or
the Steam button to start the descaling
process. Both buttons will blink.
8
Place a 1L / 34 fl.oz.
container under the coffee
outlet and steam wand. Press
the Ristretto button or the
Steam button to start rinse
cycle.
5
Milk froth level
LED will indicate
Descaling
First rinse cycle
Second rinse
cycle
9
Once finished, discard liquid
the progress of the
descaling process.
from the container. Repeat
6 – 8. When the second rinse
cycle is finished, the Ristretto
button and the Steam button
will flash 3 times, and the
machine will be turned off.
6
Once finished,
discard liquid
from the
container. Empty
water tank and
rinse clean.
7
Fill water tank to
MAX with potable
water.
10
Rinse drip tray and
water tank. And put
them back on the
machine.
22
Page 24
EN
Water Hardness
1
Turn the machine ON
by pressing the Lungo,
Espresso, Ristretto, or
Steam button. Heating
up takes approximately
3 seconds.
Water hardness Descaling after
App. dH CaCO3
Level 1 < 3 < 50 mg/l 2 200
Level 2 > 4 > 70 mg/l 1 800 dH
Level 3 > 7 > 130 mg/l 1 400 CaCO3
Level 4 > 14 > 250 mg/l 1 000
Level 5 > 21 > 380 mg/l 600
< 1 minute
2
Setting your water hardness, dip the Water Hardness Test Strip in and out the water tank.
Wait 1 minute. Press and hold the temperature button and the milk froth button for 5
seconds to set the water hardness level. Pressing temperature button increases the level
and pressing milk froth button decreases the level. Set the water hardness according to the
results on the Test Strip. Press any button not blinking to save and exit.
(40 ml)
German Grade
Calcium Carbonate
23
Page 25
Troubleshooting
EN
Buttons not illuminated - Check the water tank. If empty, fill with portable water.
No steam or hot water - Press the Ristretto, Espresso, or Lungo button to turn to «ON-mode».
No coffee, no water, unusual coffee flow - Check if the water tank is correctly positioned, if empty, fill with potable
Coffee is not hot enough - Preheat cup. - Descale the machine, if necessary.
The capsule lever does not close
completely
Leakage (water under the machine) - Empty drip tray if full.
No coffee flow, water goes directly into
the capsule bucket (despite inserted
capsule)
Buttons flashing - Check the water tank. If empty, fill with potable water and brew a coffee.
Descale alert LED is on - Descale the machine.
Machine is ON but ceases to operate
Machine is ON but ceases to operate
Machine turns to OFF mode
- Machine turns OFF automatically.
See paragraph on «Energy Saving Concept».
- Press the Ristretto, Espresso, or Lungo button to turn to «ON-mode».
- Check the descale alert LED or the steam wand cleaning alert LED is on. If on,
descale or clean the steam wand.
- Do a manual purge by pressing and holding the Steam button for 3 seconds.
water.
- Empty the capsule container. - Check that no capsule is blocked inside the machine (Note: do not put your
- Check drip tray is securely inserted.
- Ensure capsule lever is closed. - Empty capsule bucket and check that no capsule is blocked inside the
- Check steam tip for blockages. Use pin cleaning tool stored under the water
tank to unblock each of the holes.
- Turn off the machine.
- Wait 60 minutes and press the Ristretto, Espresso, or Lungo button to turn to
«ON-mode».
- Power machine off by holding the Ristretto, Espresso, or Lungo button.
- Wait 60 minutes and turn on. - If problem persists, call the Nespresso Club.
- To save energy the machine will turn to OFF mode after 10 minutes of non
use. See paragraph on «Energy Saving Concept».
- Check the outlet: plug, voltage, fuse.
- Check the outlet: plug, voltage, fuse.
- Descale the machine, if necessary.
finger inside the machine).
- If problem persists, call the Nespresso Club.
machine. (NOTE: do not put finger inside the machine) If problem persists, call
the Nespresso Club.
- Descale machine, if necessary.
- Complete a Clean Steam Wand cycle, if necessary.
- Visit Nespresso.com or call the Nespresso Club to contact your local service
centre.
- Press Ristretto, Espresso, or Lungo to turn to «ON-mode».
24
Page 26
EN
Troubleshooting Milk Froth Preparation
Milk steam cycle does not start
Quality of froth not up to standard
Steam is very wet
Milk overflows
Milk temperature is too hot
Milk temperature is not hot enough
Clean Steam Wand alert LED is on
- Check if the water tank is correctly positioned, if empty, fill with potable water.
- Check steam tip for any blockages and ensure wand is lowered.
- Be sure to use pasteurised whole or semi-skimmed milk at refrigerated
temperature (about 4-6 °C / 39-43 °F). For a better result, the milk must be
newly opened.
- Check the milk froth setting.
- Use cold, potable water. Do not use highly filtered, demineralised or distilled
water.
- Fill jug with appropriate milk volume.
- Minimum fill level as marked on the inside & outside of the jug.
- Maximum fill level as marked on the inside & outside of the jug.
- Be sure to use the Breville milk jug provided.
- Check the milk jug is positioned correctly on the milk jug temperature sensor.
- Check the temperture sensor in the drip tray is clean.
- Preheat cup.
- Use the Breville milk jug provided.
- Check the milk jug is positioned on the milk jug temperature sensor.
- It alerts when the machine detects that steam wand is blocked or after the
machine has done 90 cycles.
- Use the Breville milk jug provided.
- Clean both the milk jug and steam wand after each use.
- Clean the steam wand.
- To stop overflow, either reduce the initial volume of milk and/or reduce the froth
level. This varies depending on milk type.
- Decrease the milk temperature setting.
- Increase the milk temperature setting.
- Check the steam tip for blockages.
- Clean the Steam Wand.
25
Page 27
Contact the Nespresso Club
As we may not have foreseen all uses of your appliance, should you need
any additional information, in case of problems or simply to seek advice, call the
Nespresso Club or your Nespresso authorised representative.
Contact details for your Nespresso Club or your Nespresso authorised
representative can be found in the «Welcome to Nespresso» folder in your
machine box or at nespresso.com
Disposal and Environmental Protection
Your appliance contains valuable materials that can be recovered or can be
recyclable. Separation of the remaining waste materials into different types facilitates
the recycling of valuable raw materials. Leave the appliance at a collection point.
You can obtain information on disposal from your local authorities.
EN
26
Page 28
EN
Limited Guarantee
Breville guarantees this product against defects in materials and workmanship for two years domestic use (or 3 months commercial use) from the date of purchase.
During this period, Breville will either repair or replace, at its discretion, any defective product at no charge to the consumer. In the event of a product or accessory
being repaired or replaced during the guarantee period, the guarantee on the repaired product will expire two years from the purchase date of the original product,
not two years from the date of repair. This guarantee excludes liability for consequential loss or any other loss or damage caused to property or person arising from
any cause whatsoever. It also excludes defects caused by the product not being used in accordance with instructions, accidental damage, misuse, being tampered
with by unauthorised persons, improper maintenance, consumable items or normal wear and tear and does not cover the cost of claiming under the warranty.
How to Claim Under the Breville Warranty
Nespresso is handling product enquiries and product servicing on Breville’s behalf. If you believe your product is defective, contact the Nespresso customer service
team directly for instructions on where to send or bring it for repair by a Breville authorised service agent. Contact Nespresso Australia: 1800 623 033 or
New Zealand: 0800 234 579 auclub@nespresso.com.
This product is imported and distributed by Breville and this warranty is provided by Breville. To the extent permitted by law, Nespresso has no liability for the product
and all guarantees, warranties and conditions by Nespresso are excluded.
27
Page 29
Notes
EN
28
Page 30
EN
Notes
29
Page 31
Notes
EN
30
Page 32
CREATISTA UNO
by Nespresso
E19
Loading...