English
User manual
Before using this appliance please read carefully the user manual
and the safety instructions!
ES 80
IMPORTANT SAFEGUARDS
When using electrical appliances, basic safety precautions should
always be followed, including the following:
• Read all instructions carefully.
• Do not touch hot surfaces. Use handles or knobs.
• To protect against fire, electric shock and personal injury do not immerse cord, plugs or appliance in
water or other liquid.
• Close supervision is necessary when any appliance is used by or near children.
• Unplug from outlet when not in use and before cleaning. Allow to cool before putting on or taking
off parts, and before cleaning the appliance.
• Do not operate any appliance with a damaged cord or plug or after the appliance malfunctions, or
has been damaged in any manner. Return appliance to the nearest authorized service facility for
examination repair or adjustment.
• The use of accessory attachments not recommended by the appliance manufacturer may result in fire,
electric shock or personal injury.
• Do not use outdoors.
• Do not let cord hang over edge of table or counter, or touch hot surfaces.
• Do not place on or near a hot gas or electric burner, or in heated oven.
• Always attach plug to appliance first, then plug cord into the wall outlet. To disconnect, turn any control
to off, then remove plug from wall outlet.
• Do not use appliance for other than intended use.
• Use extreme caution when disposing hot steam.
• Do not put fingers inside capsule housing, due to the sharp needle that is there to pierce the capsule.
SPECIAL CORD SET INSTRUCTIONS
Regarding your Cord Set:
A A short power-supply cord (or detachable power-supply cord) is provided to reduce risks that may result
from longer tangled cords.
B Longer detachable power-supply cords or extension cords are available and may be used if care is
exercised in their use.
C If a long detachable power-supply cord or extension cord is used (1) the marked electrical rating of the
detachable power-supply cord or extension cord should be at least as great as the electrical rating of
the appliance, (2) if the appliance is of the grounded type 3-wire cord, and (3) the longer cord should
be arranged so that it will not drape over the counter top or table top where it can be pulled on by
children or tripped over.
1
CAUTION
Household and commercial use only. Any servicing other than cleaning and user
maintenance should be performed by an authorized service representative.
• Do not immerse base in water or try to disassemble.
• To reduce the risk of fire or electric shock, do not remove the base, or any user serviceable parts inside.
Repair should be done by authorized service personnel only.
• Check voltage to be sure that the voltage indicated on the name plate corresponds with your voltage.
• Never use warm or hot water to fill the water container. Use cold water only!
• Keep your hands and the cord away from hot parts of the appliance during operation.
• Never clean with scouring powders or sharp implements.
• The cord or any defective element must be replaced exclusively by your Nespresso dealer.
Under no circumstances should you open the machine yourself.
SAFETY INSTRUCTIONS
Read these instructions carefully before using your Nespresso machine.
• Do not plug the machine into anything other than a grounded electrical socket. Verify that the voltage indicated
on the technical specifications plate on the bottom of the unit corresponds to your electrical installation.
• Do not place your Nespresso machine on a hot surface (electrical heating plate for example) or near a flame.
• Attention: Do not draw off hot water while temperatur indicator lamp (red) blinks fast. Strong steam jet
would result instead of hot water - hazard of burning! Cool down the system see Cappuccino «4».
• Do not open the jaw while the machine is functioning since the extraction of coffee is done under high pressure.
• Do not use the machine without the drip tray and grill in place.
• Remove the plug when cleaning your machine.
• Ensure that the electrical cord does not come into contact with sharp or hot objects. Do not disconnect the
electrical plug by pulling on the cord.
• Avoid touching the electrical cord as well as any other part which may become hot during the use of the
machine (steam nozzle, chrome portion of capsule holder).
• Never plunge the machine in water.
• Keep the machine and the electrical cord out of children‘s reach.
• For descaling, adhere to the directions which follow:
2 Preparation: please read carefully the safety instructions on the descaling packaging.
3 Descaling: do not open the jaw and do not use the steam nozzle during descaling process.
4 Rinse: rinse the water tank and clean the machine to avoid any residual descaling agent.
• Do not use the machine if it is damaged or if the cord is in bad condition.
• The cord or any other defective element must be replaced exclusively by an authorized after-sales service center.
Under no circumstances should you open the machine yourself.
Save these Instructions
TSM SUCCESS MANUAL® Safe to use - easy to understand due to
2
TSM® - Total Security Management and ergonomic communication
®
251104
Descaling
Nozzle
Descaling warning:
All green lamps are flashing
Preparation
Machine
off
Descaling
Rinse
Remove nozzle/ cappuccinatore
device and adapter
1.
2.
Eject capsule 0.1l descaling
Empty drip tray,
remove Claris filter
START:
Lamps Lever right Lever leftLamps
Dismantle the
cappuccino device
agent + 0.5 l water
simultaneously, 3 seconds
START:
Recipient
(min. 0.6 l)
Place cloth in case
of steam injection
Refill the tank
simultaneously,
3 seconds
Lamps
Empty the tanks,
rinse and fill water
tank completely
Lever rightLamps
Finish
3
Machine switches off automatically
Volume
Factory setting:
Change setting
1
Within 10 seconds
2
Fill cup
3
Within 10 seconds: Press button M
4
Press button M
OK
min. 15 ml
Troubleshooting
No indication
40 ml 110 ml
Coffee Hot water
or
Press + hold
or
Release button
New volume has been stored
Check plug and fuses
Lever to the right
STOP
Lever to the left
Coffee is not hot enough
Coffee does not come out
No coffee, water only
Coffee is not flowing, green
status display lights up
4
Prewarm cup, hot water without capsule.
Descale if necessary
Clean, descale if necessary
Clean/insert capsule correctly
Fill water tank
Preparation
Switch on
Temperature indicator:
Jaw closed
flashing:
heating up
Fill water tank
fresh water
Before the first usage/after a longer period of non-use:
Rinse
Coffee outlet + hot
water/steam nozzle
Place a recipient
on cup tray
1.
2.
Let water flow for
1 minute, press
buttom repeatedly
3.
4.
Let water flow for
1 minute, press
buttom repeatedly
constant:
ready
rapid flashing:
too hot
Daily:
Pre-heating/rinsing
1.
2.
ready
2 cups without capsule
5
Espresso
Insert capsule
Place a cup on drip grid
Select small or large
cup
automatic or
STOP
Eject
capsule
Daily after last
espresso
Capsule container
The capsule drops
into capsule
container
Keep system
warm
Some left over
water is normal
6
Handle
Lever coffee /
hot water (steam)
Fresh water tank
Capsule container
(22 capsules)
Drip grid
Status display
Call authorized dealer
Reposition lever
Water tank empty
Capsule container full
MEMORY lamp/button
Large cup lamp/button
Small cup lamp/button
Cappuccinatore
device
Drip tray
ON/OFF button
Indicator of temperature
Hot water button/lamp
Steam button/lamp
7
Froth milk for
Cappuccino
Preparing the milk
Select «steam»
heating up ready
STOP
Froth OK
Beware of hot nozzle
Temperature change ~55-75°C
ready
STOP
too hot
Place a recipient
see
Espresso
8
Let water flow for 30 seconds
Prepare espresso direct into the frothed up milk
Cool down
system
STOP
Cappuccino – Caffe latte: clean after each use
Warm up phase
Deep into fresh water
Beware of hot nozzle
Rinse minimum 10 sec.
Dismantle and clean cappuccinatore
once a week
9
Loading...