ENGLISH
QuickStart Guide
www.nero.com
Nero
Information on copyright and trade marks
The Nero 6 QuickStart Guide and all its contents are protected by copyright and are
the property of Ahead Software. All rights reserved. This QuickStart Guide contains
material that is protected by internationally valid copyright. This manual may not - in
whole or in part - be copied, transmitted or otherwise reproduced without the express
written permission of Ahead Software.
All trade mark names and trade marks are the property of the respective owners.
Ahead Software rejects any claims that transcend the legal guarantee agreement.
Ahead Software does not accept any liability for the correctness of the content of the
Nero 6 QuickStart Guide. The contents of the software supplied, as well as of the
Nero 6 QuickStart Guide, are subject to change without prior notice.
The trademarks mentioned here are only listed for information purposes.
REV 1.5
Unless you own the copyright or have the permission of the copyright holder,
the unauthorized copying of discs can represent a violation of national or
international laws and may result in serious penalties.
Copyright © 1995 -2004 by Ahead Software AG
2 • E Nero
Contents
Contents
1
General information about Nero 6 4
1.1 General system requirements 4
1.2 Special minimum requirements for individual programs 5
1.3 Software supplied 6
2
Installation 10
2.1 Installation 10
2.2 Uninstalling 11
3
Nero StartSmart – Your command center 12
3.1 Using Nero StartSmart 12
3.2 User interface and navigation 12
3.3 Nero ProductCenter 21
4
Burning –The Basics 22
4.1 Make Data Disc 22
4.2 Make Audio Disc 29
4.3 Make Video Disc 35
4.4 Copy disc 41
ENGLISH
5
Service 45
5.1 Options 45
5.2 FAQ 46
5.3 Contact 47
Nero E • 3
General information about Nero 6
1 General information about Nero 6
1.1 General system requirements
Microsoft © Windows 98/98SE, Windows 2000 (Service Pack 4 or later), Windows
XP, Windows 2003 Server
Microsoft© Windows Internet Explorer 4.0 or later
Processor and memory:
For writing audio and data discs:
500Mhz Intel® Pentium 3 processor or equivalent, 64MB RAM
For DVD and video authoring:
1.2Ghz Intel® Pentium 3 process or equivalent, 128MB RAM
For real-time capturing and burning:
1.6Ghz Intel® Pentium 4 processor or equivalent, 128MB RAM
Hard disc space
500 MB disk space for a typical installation of all the components
Up to 9 GB available hard disk space for DVD images and temporary DVD files
Display settings
Graphics card with at least 8MB video memory and minimum resolution of 800 x
600 pixels and 16-bit color settings
Optical device
CD or DVD recordable or rewritable drive
Optional:
16-bit Microsoft© Windows compatible soundcard and speakers
Installation of latest WHQL (Microsoft Windows Hardware Quality Labs) certified
device drivers recommended
4 • E Nero
General information about Nero 6
1.2 Special minimum requirements for individual programs
InCD 4
CD or DVD-rewritable drive
Nero ShowTime 2
System requirements:
Microsoft© DirectX 9.0a or later
Optical drive with DVD capability to playback DVD-Video
Graphics card with video overlay support
*
Optional
Multichannel plug-in (Dolby® Digital 5.1 sound system for 5.1 channel audio play
DVD-Video plug-in for DVD-Video playback
:
back)
NeroVision Express 3
System requirements:
Microsoft© DirectX 9.0a or later
*
*
ENGLISH
Optional:
OHCI compliant FireWire© controller (IEEE 1394) for DV capturing
TV tuner or video capture card for analog recording
Installation of the latest WHQL certified device drivers recommended
List of compatible devices: http://www.nero.com/en/capture_devices.php
DVD-Video plug-in
encoding
*
DVD-Video and Multichannel plug-in are already included in retail version.
Nero E • 5
*
for DVD-Video function and Dolby® Digital 2 channel
General information about Nero 6
Nero Recode 2
*
System requirements:
Microsoft© DirectX 9.0a or later
Optional:
DVD-Video plug-in
*
to enable DVD recoding, and DVD9 to DVD5 feature
Nero Cover Designer
Optional:
Printer
1.3 Software supplied**
Nero Burning ROM 6
With Nero Burning ROM 6 you have a powerful piece of burning software, which
makes it easy for you to burn your data, music files or videos onto CD or DVD.
Nero StartSmart
Nero StartSmart is the command center of the Nero 6 product family and makes it
easier to use the comprehensive software programs. Once you have launched Nero
StartSmart, all you have to do is select the desired task and the corresponding
software starts automatically.
Nero Express 6
Nero Express 6 provides all the performance and efficiency of Nero Burning ROM
6 with a simplified user interface. Whether you are a beginner or an expert, Nero
Express 6 guides you more quickly and more easily through your desired burning
tasks.
NeroVision Express 3
With NeroVision Express 3, you can record videos and edit or burn existing video
files. Creating associated menus, e.g. for selecting a section or choosing between
individual films, is also quick and uncomplicated with NeroVision Express 3. You
can also use NeroVision Express 3 to create convenient slide shows and even use
your own music as a soundtrack for them.
*
DVD-Video and Multichannel plug-in are already included in retail version.
**
The scope of the specific software package supplied depends on the type of
product bundle acquired. In other words, the package concerned may not contain all
the individual programs.
6 • E Nero
General information about Nero 6
Nero Recode 2
Nero Recode 2 is a new program for copying and archiving non-copy-protected DVD
video titles onto 4.7 GB DVD+R/RW, DVD-R/RW or DVD-RAM discs. If the source
DVD is larger than 4.7 GB, Nero Recode 2 can compress the contents so that they
fit onto an empty DVD disc with any noticeable loss of quality.
Nero Wave Editor 2
Nero Wave Editor 2 is a program for editing and recording audio files. The various
filtering and sound optimization methods allow you to create individual audio files
quickly and easily. You can then burn your edited audio tracks using Nero Burning
ROM 6, Nero Express 6 or NeroMIX.
Nero SoundTrax
Nero SoundTrax is a professional program for the production of audio CDs. As well
as putting together a compilation of audio files for a CD, it also allows you to mix or
edit the content of the audio files. Nero SoundTrax also provides several wizards,
which allow you to transfer your records or tapes to your PC in just a few easy steps.
Nero Cover Designer
Nero Cover Designer is a user friendly program for creating and designing
individual covers and labels. It allows you to use your own ideas to create CD covers,
booklets and much more. You can give every disc an individual look.
ENGLISH
Nero Media Player
The Nero Media Player program enables you to play back audio tracks. The
program supports the most current formats, including MP3, WAV, AAC, to name but
a few. Nero Media Player also enables you to play back Internet streams, and to
create and play back playlists.
Nero ShowTime 2
With Nero ShowTime 2, you have a program that can play back all digital recordings
(e.g. movies, TV programs, home videos, DVD video) with excellent picture and
sound quality.
Nero PhotoSnap, Nero PhotoSnap SE
Nero PhotoSnap lets you edit your favorite photographs. You can make use of a
wide range of options to improve their quality.
Nero PhotoSnap Viewer
Nero PhotoSnap Viewer is a program for viewing image files and photofiles.
Nero E • 7
General information about Nero 6
Nero MediaHome
Nero MediaHome is a program for streaming videos, music and images to UPnP-
capable equipment (UPnP = Universal Plug and Play) and also to Nero
ShowTime 2.
InCD 4
InCD 4 is a packet writing program, which formats rewritable discs in such a way that
they can be used like large diskettes. You can copy files onto the disc using
Drag&Drop in Microsoft Explorer or save them to the disc from other applications.
InCD Reader 4
InCD Reader 4 is a program that allows you to read discs written in MRW format on
systems that do not support MRW.
Nero ImageDrive
Nero ImageDrive sets up a virtual drive, which looks like a real drive and behaves in
the same way, i.e. it allows you to open and view files and programs that are located
on this virtual drive (image).
Nero BackItUp
Nero BackItUp is an easy to operate, convenient and powerful program for backing
up and restoring data. It allows you to archive your back ups on CD and DVD, which
is an economical and secure method.
Nero Toolkit
The Nero Toolkit contains the following programs: Nero CD-DVD Speed 3, Nero
DriveSpeed, Nero DiscAgent and Nero InfoTool 2. Nero CD-DVD Speed 3 is a
program that tests the speed of the available CD/DVD drives. Nero DriveSpeed
allows you to set the read speed of discs, which noticeably lowers noise level, or to
optimize the spin up or spin down times of your drives. Nero DiscAgent optimizes
and repairs your discs so that they can work reliably for a long time (this is currently
only possible with UDF discs). Nero InfoTool 2 provides you with information about
the most important features of installed drives, inserted discs, installed software and
much more.
DVD-Video Plug-in
In conjunction with the NeroVision Express 3 program, the DVD-Video Plug-in
allows the encoding of video files in DVD/SVCD format and the encoding of SVCD in
Nero Burning ROM 6. If your video files are in a DVD compatible format, you can
8 • E Nero
General information about Nero 6
burn them with the Nero 6 burning programs. You can then play back the videos on
any DVD player
Nero Digital Audio Plug-in
The Nero Digital Audio Plug-in allows you to encode audio files in MP4 format and
also to decode them into another format (HE-AAC). High Efficiency Advanced Audio
Coding (HE-AAC) is the very latest audio compression technology; its main feature is
its revolutionary high-speed compression and its incomparable sound quality. The
Nero Digital Audio Plug-in offers multiple real time encoding, variable bit rates,
multi-channel functionality and direct MPEG-4 ripping, burning, playback and editing.
*
.
For detailed info on how to use the above applications, please refer to
the .pdf manuals on the original installation disc
www.nero.com.
or on our website
ENGLISH
*
Some DVD players are not able to play back certain disc formats. Please consult
the manufacturer to find out which formats your DVD player supports.
Nero E • 9
Installation
2 Installation
2.1 Installation
You can set up Nero 6 with no problems using the installation program.
To install the software under Windows 2000, Windows XP or Windows
Server 2003, you must have administrator rights.
Carry out the following steps:
1. Close all Windows programs and close any anti-virus software which may be
running.
2. Insert the Nero 6 CD into the CD/DVD drive.
3. An installation menu appears, in which you can install the desired components.
Click on the appropriate button to start the installation wizard.
If the program does not start automatically, select the CD/DVD drive
containing the Nero 6 CD in Explorer. Double click on the ‘setup.exe’
program in the main directory.
4. In the welcome window, you can once again see what you want to install. Click on
Next to continue with the installation.
5. Carefully read through the license agreement. If you agree to the terms of the
license agreement, click on ‘I accept all terms of the preceding License
Agreement’. If you do not accept the license terms, you cannot install Nero 6.
Click on Next to continue.
6. Complete the fields ‘User name’ (e.g. first name and surname), ‘Organization’
(e.g. company) and ‘Serial number’. You can find the serial number on/in the
Nero 6 packaging. Once you have made your entries, click on ‘Next’.
The installation wizard then automatically installs the selected program.
7. After the automatic installation, you can either restart your computer or exit the
installation wizard.
8. To close the installation menu, click on ‘Finish’. To install further components,
click on the appropriate button and carry out the installation with the aid of the
wizard.
9. If necessary, restart your PC so that all the new settings take effect.
10 • E Nero
Installation
2.2 Uninstalling
To uninstall Nero 6 or individual components, proceed as follows:
To uninstall the software under Windows 2000, Windows XP or Windows
Server 2003, you must have administrator rights.
1. Insert the Nero 6 CD into the CD/DVD drive.
2. The Setup program is started automatically. An installation menu appears, in
which you can select the components you wish to delete. Click on the appropriate
button to start the installation wizard.
If the program does not start automatically, select the CD/DVD drive
containing the Nero 6 CD in Explorer. Double click on the ‘setup.exe’
program in the main directory.
3. In the welcome window, you can once again see the components you wish to
uninstall. Click on ‘Next’ to continue uninstalling.
4. Click on ‘Remove’ and confirm by clicking on the ‘Next’ button. The Uninstall
wizard opens.
ENGLISH
5. The Nero 6 uninstall wizard then automatically removes the desired components.
Once the uninstall is complete, click on ‘Finish’.
6. Restart your computer so that the changes will take effect.
Nero E • 11
Nero StartSmart – Your command center
3 Nero StartSmart – Your command center
3.1 Using Nero StartSmart
The tasks shown in Nero StartSmart depend upon the version and the
installed programs of Nero 6 and therefore can deviate from the description
within the documentation!
The new program Nero StartSmart is the command center for the Nero 6 product
family and makes it easier to use the comprehensive software programs. Once you
have started Nero StartSmart, all you have to do is select the desired category (e.g.
Audio), then choose a task (e.g. Make Audio CD) and the relevant software starts
automatically.
3.2 User interface and navigation
3.2.1 Standard view
12 • E Nero
Nero StartSmart – Your command center
r
r
r
t
Nero StartSmart consists of the following areas and elements.
If recorders that can burn several formats are
installed on the computer and/or the option to
display all recorder formats is activated, the
possible project types appear in the upper section
of the Nero StartSmart window. The content of the
categories and the possible tasks change according
to the selected project type. For example, an audio
CD can only be created if CD has been selected as
the project type.
Depending on the selected project type and the
installed software, this section shows the available
categories in Nero StartSmart. If you hover the
mouse over the individual category icons, the
possible tasks in that category are displayed. Fo
each task, you also have the option of deciding fo
yourself which application is to be used to open it. If
you hover the mouse over the desired task, the
‘Open with’ option appears in the Nero StartSmart
bar. You can then select the desired program in the
pulldown menu.
ENGLISH
Clicking on this button adds the Nero StartSmart
bar to the program interface. The Nero StartSmart
bar shows you the installed components of the
Nero 6 bundle in the ‘Applications’ area and, at the
same time, allows you to select the desired
program directly by clicking on it. You can open up
the individual programs in the Nero Toolkit by
clicking on them.
Clicking on this button changes the color of you
Nero StartSmart interface.
This button displays the standard Nero StartSmart
mode. If this mode is selected, only the most
frequently used tasks are displayed. Clicking on this
button switches Nero StartSmart to Expert mode.
This button displays the Nero StartSmart exper
mode. If this mode is selected, all available tasks
are displayed. Clicking on this button switches Nero
StartSmart to standard mode.
Clicking on this button opens up the configuration
window. Here you can set which program in the
Nero 6 family is started for which tasks.
This area opens the Nero ProductCenter. If you
are in the Nero ProductCenter, clicking on this
area takes you back to standard view.
Nero E • 13
Nero StartSmart – Your command center
This button opens the Nero StartSmart help file.
Clicking on this button will minimize Nero
StartSmart and move it to the Windows toolbar.
Clicking on the Nero StartSmart symbol will bring
the application back up.
Clicking on this button closes Nero StartSmart.
3.2.2 Nero StartSmart's extended features
In addition to those areas and elements that are present in standard view, Nero
StartSmart's extended features let you directly open the desired program or one of
the manuals.
14 • E Nero
Nero StartSmart – Your command center
This area shows all installed applications in the
Nero 6 product family. Click once on the desired
application to access it.
ENGLISH
This area shows all installed applications in the
Nero Toolkit. Click once on the desired
application to access it.
This area shows all the installed manuals of the
Nero 6 product family. Open the manual you
require by clicking once.
Nero E • 15
Nero StartSmart – Your command center
3.2.3 Navigation in Nero StartSmart
If you hover the mouse over the individual category icons, the possible tasks in that
category are displayed. The tasks displayed depend on the selected mode. In
standard mode, only the frequently used tasks are shown; in expert mode all tasks
are displayed. If more than eight tasks are available in a category, you can show the
remaining tasks by clicking on the small arrow in the bottom right of the screen.
This category includes the tasks that are performed most
frequently. Some are present as a default, such as the 'Create
audio CD' and 'Copy CD' commands.
However, you can also create your personal favorites. For more
on this, please read the section on 'Managing favorites'.
This category contains the possible tasks for a data disc. The
tasks displayed depend on whether standard or expert mode is
selected.
CD DVD
Standard mode: Standard mode:
Make Data CD Make Data CD
Format/Prepare Rewritable
CD
Make Audio and Data CD
Expert Mode: Expert Mode:
Make Bootable CD Make Bootable DVD
Make UDF CD Make UDF DVD
Make UDF/ISO CD Make UDF/ISO DVD
Make Hybrid CD
Make Mixed Mode CD
Format/Prepare Rewritable
DVD
This category contains the possible tasks for an audio disc. The
tasks displayed depend on the selected mode.
16 • E Nero
CD DVD
Standard mode: Standard mode:
Make Audio CD
Play Audio
Convert Audio CDs to Nero
Digital Audio
Encode Audio Files
Convert Audio CDs to audio
files
Play Audio
Convert Audio CDs to Nero
Digital AudioMake MP3 Disc
Encode Audio Files
Make MP3 DVD
Make WMA DVD
Nero StartSmart – Your command center
Make MP3 CD Make Nero Digital Audio DVD
Make WMA CD
Make Nero Digital Audio CD
Make Audio and Data CD
Expert Mode: Expert Mode:
Make Mixed Mode CD Edit Audio
Edit Audio Record Audio
Mix Audio CD
Record Audio
Convert Tape to CD
Convert LP to CD
This category contains the possible tasks for photo and video
editing. The tasks displayed depend on the selected mode.
ENGLISH
CD DVD
Standard mode: Standard mode:
Make Video CD Capture Video
Make Super Video CD Play Video
Make Photo Slide Show
(VCD)
Make Photo Slide Show
(SVCD)
Capture Video Make Photo Slide Show (DVD)
Play Video Recode DVD-Video
Convert DVD-Video Movies to
Nero Digital
Record TV Show Record TV Show
View your Photos View your Photos
Edit your Photos Edit your Photos
Expert Mode: Expert Mode:
Make Movie Make Movie
Make miniDVD Record Directly to Disc
Burn DVD-Video Files
Make your own DVD-Video
Make or Modify DVD-Video
(VR)
Convert DVD-Video Movies to
Nero Digital
Nero E • 17
Nero StartSmart – Your command center
This contains the tasks involving copying and the tasks relating to
backing up. What is displayed depends on the selected project
type and the current mode.
CD DVD
Standard mode: Standard mode:
Copy DVD-Video Movies to
CD
Copy CD Copy Multiple DVD-Video
Back up Files Copy DVD
Restore Backups Back up Files
Schedule Backups Restore Backups
Burn Image to Disc Schedule Backups
Burn Image to Disc
Expert Mode: Expert Mode:
Back up Hard Drive Back up Hard Drive
This section contains the additional tasks relating to discs. What is
displayed depends on the selected disc type and the current
mode.
CD DVD
Standard mode: Standard mode:
Get System Info Get System Info
Test Drive Test Drive
Erase CD Erase DVD
Make Label or Cover Make Label or Cover
Control Drive’s Speed
Share Your Music, Photos,
and Videos
Optimize and Repair your
Media
Expert Mode: Expert Mode:
Disc Info Disc Info
Mount a Disc Image Mount a Disc Image
Copy Entire DVD-Video
Movies to One
Control Drive’s Speed
Share Your Music, Photos, and
Videos
Optimize and Repair your
Media
18 • E Nero
Nero StartSmart – Your command center
3.2.4 Managing favorites
In the extended area of Nero StartSmart, new tasks can be assigned to the
'Favorites' category and tasks that are no longer needed can be removed. This
category does not contain any tasks that cannot be found in other catagories.
However, the tasks can be arranged conveniently so that they can be easily
performed.
3.2.4.1 Adding tasks
Adding a task to the 'Favorites' category makes it possible to start the program
particularly quickly.
1. Click on the button on the left-hand side of the program interface in order to
display the Nero StartSmart extended features, if they are not already displayed.
Click on one of the category icons at the top of the screen to display tasks.
2. Place the mouse-cursor on the task that you want to save as one of your
favorites. The program opened for this task will appear in the extended area.
3. Click on 'Add to favorites' and the selected task will now be located among the
'Favorites' as well as in its original category.
ENGLISH
3.2.4.2 Delete tasks
If you delete a task from the 'Favorites' category, this will not delete it from Nero
StartSmart, but only from 'Favorites'. The task will remain accessible in its original
category.
1. Click on the button on the left-hand side of the program interface to display the
Nero StartSmart extended features, if they are not already displayed. Click on
one of the category icons at the top of the screen to display tasks.
2. Place the mouse-cursor above the task that you want to have deleted.
3. Click on 'Delete from favorites' and the task will be removed. However, it will
remain accessible from its original category.
Nero E • 19
Nero StartSmart – Your command center
3.2.5 Assigning programs
Clicking on a task in Nero StartSmart automatically opens the appropriate program
with which you wish to perform that task. If there are a number of programs present
that the tasks can be performed with, you can change the program assignment and
choose the program that you would prefer to use.
Many tasks, such as creating an audio CD, can be performed with more than one
program, and you can change the program assignment.
For example, if you do want to use Nero Burning ROM 6 rather than the default
application Nero Express 6 to create an audio CD, proceed as follows:
1. Click on the button on the left-hand side of the program interface in order to
display the Nero StartSmart extended features, if they are not already displayed.
Click on one of the category icons at the top of the screen to display tasks.
2. Move the mouse to the task concerned and the application which opens when
you click on the task will appear in the extended area.
3. Click on the drop down button next to the program names and select the
application you want to start.
4. Check the ‘Use as standard application’ check box if you always want this
program to open in the future.
5. Click on the button with the green arrow to save the change and open the desired
program.
20 • E Nero
Nero StartSmart – Your command center
3.3 Nero ProductCenter
Clicking on the button opens the Nero ProductCenter.
Nero ProductCenter administers the installed Ahead Software products and this is
the place where you can also enter the new serial number.
The version numbers of the installed Ahead Software products appear in the first
column of the 'Programs' tab. The second column shows which versions were
available the last time a check was performed, as well as the date of the last
inspection. If you would like to know which versions are currently present, make an
internet connection and click on the 'Check now' button. If the
the version number, you can click on the icon to reach the website's update area,
where you can obtain the update.
If you want the Nero ProductCenter to automatically search for updates, tick the
“Automatically check for updates” checkbox. In the box underneath enter how often
the check for updates should be performed.
On the 'Serial numbers' tab, you can enter the appropriate serial number when you
obtain a program or plug-in. To do this, click on the 'Enter new number' button, enter
the serial number and click on the
icon to save it.
icon appears next to
ENGLISH
Nero E • 21
Burning –The Basics
t
4 Burning –The Basics
In this section, the QuickStart guide only deals with the defaul
combinations. If you have already changed the program assignment, the
programs opened differ from those in the QuickStart. For more detail,
please refer to the .pdf manuals on the original installation disc.
4.1 Make Data Disc
1. Start Nero StartSmart, select the ‘Data’ category and click on ‘Make Data CD’ or
'Make Data DVD'.
22 • E Nero
Burning –The Basics
Nero Express 6 starts automatically and the compilation window for data
opens.
ENGLISH
2. In the window, click on the ‘Add’ button to open the window for selecting files.
Nero E • 23
Burning –The Basics
3. Select the desired files and click on the ‘Add’ button to transfer them to the
compilation.
4. Once you have finished adding files, click on the ‘Finished’ button to close the
window and return to the Nero Express 6 screen.
24 • E Nero
Burning –The Basics
5. All the files you have added appear in the compilation window. Click on the 'Next'
button to advance to the burning window.
ENGLISH
6. Before burning the disc, make the final settings.
Nero E • 25
Burning –The Basics
f
f
t
Current Recorder
Select the desired recorder from the list o
connected recorders.
Disc name
Writing Speed
Number of copies
Allow files to be added
later (multisession disc)
If you wish, give the disc a title.
Select the speed for the burning process.
Select the number of copies to be burned.
If this checkbox is selected, a multi-session disc is
created, allowing you to add further sessions later. I
the checkbox is not selected, the disc is finalized
and no more burning is possible.
Verify data on disc after
burning
If this checkbox is selected, after burning the
program verifies that the burned data on the disc is
identical to the original data. This guarantees tha
the burned data will function as desired.
Clicking on the ‘More’ button expands the burning window and offers
additional setting options, such as selection of the burning method and
simulation of the burning process.
7. Click on the ‘Burn’ button to start burning the disc.
26 • E Nero
Burning –The Basics
The burning process starts and you will see information about the current
status.
ENGLISH
8. Click on the 'Next' button to advance to the selection window.
Nero E • 27
Burning –The Basics
9. Select the desired option or close Nero Express 6.
28 • E Nero
Burning –The Basics
4.2 Make Audio Disc
An audio disc contains music files, which can be played back in any CD or DVD
player.
1. Start Nero StartSmart, select the ‘Audio’ category and click on ‘Make Audio CD’.
ENGLISH
Nero E • 29
Burning –The Basics
Nero Express 6 starts automatically and the compilation window for audio
discs opens.
2. In the window, click on the ‘Add’ button to open the window for selecting files.
30 • E Nero
Burning –The Basics
3. Select the desired files and click on the ‘Add’ button to transfer them to the
compilation.
ENGLISH
4. Once you have finished adding files, click on the ‘Finished’ button to close the
window and return to the Nero Express 6 screen.
Nero E • 31
Burning –The Basics
5. All the files you have added appear in the compilation window. Click on the 'Next'
button to advance to the burning window.
6. Before burning the disc, make the final settings.
32 • E Nero
Burning –The Basics
f
t
y
Current Recorder
Title (CD TEXT)
Artist (CD TEXT)
Writing Speed
Number of copies
Clicking on the ‘More’ button expands the burning window and offers
additional setting options, such as selection of the burning method and
simulation of the burning process.
7. Click on the ‘Burn’ button to start burning the disc.
Select the desired recorder from the list o
connected recorders.
If the recorder supports the writing of CD TEXT, you
can enter the title of the CD here. The title may no
be longer than 64 characters.
If the recorder supports the writing of CD TEXT, you
can enter the artist for the CD here. The artist ma
not be longer than 64 characters.
Select the speed for the burning process.
Select the number of copies to be burned.
ENGLISH
Nero E • 33
Burning –The Basics
The burning process starts and you will see information about the current status.
8. Click on the 'Next' button to advance to the selection window.
9. Select the desired option or close Nero Express 6.
34 • E Nero
Burning –The Basics
4.3 Make Video Disc
A video disc contains video files, which you can burn in a variety of formats (VCD /
SVCD or DVD-Video) depending on what kind of recorder you have (CD recorder or
DVD recorder). This QuickStart Guide describes the creation of a DVD-Video disc.
The procedure for a VCD or SVCD is essentially the same.
1. Start Nero StartSmart, select the ‘Photo and Video’ category and click on ‘Make
your own DVD-Video’.
ENGLISH
Nero E • 35
Burning –The Basics
NeroVision Express 3 starts automatically and the selection window for video
discs opens.
2. Click on ‘Add Video Files’ to open the window for selecting the files.
36 • E Nero
Burning –The Basics
3. Select the desired files and click on the ‘Open' button to transfer them to the
compilation.
4. Repeat steps 2 and 3 to add more video files.
ENGLISH
5. All selected files appear in the compilation window. Click on the 'Next' button to
choose the menu.
Nero E • 37
Burning –The Basics
6. Select the menu by highlighting the desired menu from the template group using
the mouse. Click on the 'Next' button to proceed to the next window.
7. You can use the remote control to move around the menu, e.g. to view the videos
again. Click on the 'Next' button to proceed to the next window.
38 • E Nero
8. Before burning the disc, make the final settings.
f
t
Burning –The Basics
ENGLISH
Burn to
Write to Hard Disc Folder
Volume Name
Recording Settings
Clicking on the ‘More’ button expands the burning window and offers
additional setting options, such as selection of the coding quality and the
aspect ratio of the video.
Select the desired recorder from the list o
connected recorders.
If you do not want to burn the project (yet) but
you want to save it to the hard disc instead, click
on this button to open up a window where you
can select the location you want to save it to.
Change the name of the disc if you wish to do so.
Depending on the selected destination recorder,
you can adjust the recording settings, e.g. selec
the burn speed.
Nero E • 39
Burning –The Basics
9. Click on the ‘Burn’ button to start burning the disc.
The burning process starts and you will see information about the current
status.
10. Once the burning process is complete, a corresponding message appears. Click
on the ‘OK’ button to close the window.
11. Select the desired option or close NeroVision Express 3.
40 • E Nero
Burning –The Basics
f
4.4 Copy disc
Unless you own the copyright or have the permission of the copyright
holder, the unauthorized copying of discs represents a violation o
national or international laws and may result in serious penalties.
1. Start Nero StartSmart, select the ‘Copy and Backup’ category and click on ‘Copy
CD’ or 'Copy DVD'.
ENGLISH
Nero E • 41
Burning –The Basics
Nero Express 6 starts automatically and the selection window for the drives
and the final burning settings opens up.
2. As the source drive, you should select the drive containing the disc to be copied.
3. As the destination drive, select the recorder you want to use to copy the disc.
4. In the ‘Quick Copy’ section, you can determine how the disc is to be copied.
If this option is selected, the copy is made directly, i.e. from drive to drive. This
method is quick but is susceptible to errors.
If this option is not selected, an image file for the original disc is first of all
created on the hard drive and the image file is then burned. This method takes
longer and the size of the image file, and therefore the required hard disc
space, corresponds to the quantity of data to be copied from the original disc.
In addition, you can also make the following settings:
Writing Speed
Number of copies
Select the speed for the burning process.
Select the number of copies to be burned.
42 • E Nero
Burning –The Basics
5. Once you have made all your settings, click on the ‘Burn’ button to start burning
the disc.
ENGLISH
The burning process starts and you will see information about the current
status.
Nero E • 43
Burning –The Basics
6. Click on the 'Next' button to advance to the selection window.
7. Select the desired option or close Nero Express 6.
44 • E Nero
5 Service
Service
5.1 Options
5.1.1 mp3PRO Plug-in (commercially available)
The mp3PRO Plug-in is capable of creating files smaller than MP3 files with the
same or better sound quality. For example, at 64 kBit/s, the new Codec promises
near-CD quality, which is significantly better than MP3 at the same bit rate. You can
continue to play back your old MP3 files normally on a new mp3PRO player.
However, mp3PRO files played back on a new mp3PRO decoder of course offer the
optimum sound quality. This plug-in gives you the opportunity to encode unlimited
audio files in mp3PRO or MP3 format. For example, you can archive all your CDs on
your hard disc.
5.1.2 Updates (free downloads)
At http://www.nero.com, you will find regular updates for all programs, with new
functions integrated and/or errors eliminated. You can either retrieve these updates
via your Nero ProductCenter or just look at the Nero website from time to time. In
order to optimize the functionality of your programs, we recommend that you keep
them up to date.
ENGLISH
Nero E • 45
Service
5.2 FAQ
1) Where can I find step by step directions for using Nero Burning Rom 6, Nero
Express 6, NeroVision Express 3, and Nero BackItUp?
We have very detailed ‘Step by Step’ PDF manuals for all our listed programs on our
website at
2) One of my encoders has expired! What should I do?
For licensing reasons, we are only permitted to integrate test versions into Nero 6.
This gives you the chance to test out the encoder functions for a limited time. When
the test version has expired, must you must purchase the corresponding encoder
plug-in. You can do this at
take this step so that only those users who actually want to use these functions
would have to pay the license fees due.
3) Why do I not have a Help file?
Please download the latest update and the language package to enable you to
access the help files again. You can download them from:
http://www.nero.com/en/sp_file_main.html
http://www.nero.com. You will find them in the Support section.
http://www.nero.com in the online shop. We decided to do
4) Where can I download an update?
All updates and test versions of other products from the Ahead family can be found
at
http://www.nero.com.
5) Where can I get assistance with technical problems?
For all technical problems, we recommend visiting our help system at
http://englishsupport.nero.com. If you cannot find an answer to your problem there,
you can contact our support team e-mail (
you will find in our 'Contact' chapter.
techsupport@nero.com) . More information
46 • E Nero
5.3 Contact
Nero 6 is an Ahead Software product.
Ahead Software AG
Im Stoeckmaedle 18
76307 Karlsbad
Germany
Service
ENGLISH
Web:
Help: http://englishsupport.nero.com
Mail: techsupport@nero.com
Fax: +49 7248 911 888
Copyright © 1995 - 2004 Ahead Software. All rights reserved.
Printed in Germany
http://www.nero.com
Nero E • 47
48 • E Nero
Loading...