Nec Versa-SX Owners Manual

NEC Versa® LX, LXi, and SX

NEC VersaBay III CD-RW Drive Pak

Congratulations on purchasing the NEC VersaBay III CD-RW drive pak! The NEC
VersaBay III CD-RW drive features the latest in CD-ROM technology. It is fully compatible
with Kodak Multisession Photo CDs™ and standard audio CDs. You can use your drive to load
and start programs from compact discs or to play audio CDs while you work or relax. With
Windows
application software, you can write information to a CD.

In addition to introducing the NEC VersaBay III CD-RW drive features, this sheet describes:

 Removing a device from the NEC VersaBay III and installing the NEC VersaBay III

 Installing the NEC CD-RW CD software.
 NEC VersaBay III CD-RW drive specifications.

NEC VersaBay III CD-RW Drive Features

The NEC VersaBay III CD-RW drive offers the features shown in the following figure.

®

, you can also play full-length CD-i movies. Additionally, with the included

CD-RW drive. (For more details about the NEC VersaBay III, see your NEC Versa User’s
Guide.)

NEC VersaBay III CD-RW drive features

A

- Status LED

These features offer the following functions:

 Status LED — lights during data read operations. Do not eject the disc or turn off the NEC

Versa when the indicator is lit.

 Release Button — ejects the CD tray. Press this button when the power is on to insert a CD

into or remove a CD from the drive.

 Emergency Eject Hole — allows you to manually remove a CD or videodisc from the NEC

VersaBay III CD-RW drive if the eject function is disabled by software or a power failure.
To remove the disc, insert the end of a paper clip into the eject hole and push in until you
hear a click. Manually open the drawer.

B

- Release Button

C

- Emergency Eject Hole

NEC VersaBay III CD-RW Drive Pak 1

Removing a Device from the NEC VersaBay III

Follow these steps to remove a device from the NEC VersaBay III.

1.

Save your files.

2.

Either shut down Windows and power off the NEC Versa, or use warm or hot swapping,
which is available with the NEC VersaBay III Swapping utility. The Swapping utility is
provided on the Application and Driver CD that ships with the system.

3.

Close the LCD panel and locate the NEC VersaBay III on your system.
For the NEC Versa LX and LXi, the NEC VersaBay III is located on the front of the

system.

NEC Versa LX and LXi

A

- NEC VersaBay III

For the NEC Versa SX, the NEC VersaBay III is located on the right side of the system.

NEC Versa SX

A

- NEC VersaBay III

4.

Turn the NEC Versa upside down and locate the release lock (see the figure on the
following page). Slide the release lock to the unlocked position.

2 NEC VersaBay III CD-RW Drive Pak