NEC NP-PH1201QL User Manual

Page 1
Professional Installation Projectors
PH Series
NP-PH1201QL
Page 2
Powerful 3-chip 1.38” DLP installation projector with laser-phosphor light source supports new, demanding projection applications
Video & Graphics Processing
• Up to 60fps 4096 x 2160 pixels sequential input via single cable (Display Port 1.2)
• Dual Pipe input capability (2 x Display Port 1.2)
• 3D Capable
• Scaling of HDMI formats to fill the 4k display
• HDMI for Side by Side, Frame Packing & Top Bottom Formats
• Dual Flash Processing can be used to multiply the displayed frame rate for 3D sources (example 144Hz display)
• Two sources in parallel for Left and Right Eyes
3D Functionality
• Full 4k 3D display capability
• Dual Pipe: Left and Right channels input separately to projector in parallel, then interleaved for sequential display
• Synchronization of active glasses
• Adjustable Dark Time and Sync Offset for optimization of ghosting and smooth grayscale for switching switching glasses and polarizers
• HDMI input signals will be scaled to the DMD resolution.
Edge blending
Image Blanking
Linear black “curtains” adjustable for all four edges
Color adjustments
• Up to 12 bits per color processing (depending on source and input type)
• Degamma table maps 12 bit input to 16 bit palette (R, G & B) for display
• Individual R, G & B gain and bias controls
• High bit-depth blending up to 20% of the image width on all four sides of the DMD (approximately 800 pixels overlap per edge)
• Black level adjustment of the blended area to create different overlap areas
• Correction for non-active pixels at the edge of the display
Projector Control
• Keypad with LCD panel
• Network control via RJ45 and protocol
• Group Controller Application
NP-PH1201QL
Page 3
Specications for NP-PH1201QL
UNIQUE FEATURES
WARRANTY
Registered owners receive a 3-year parts and labor warranty including the rst year of InstaCare. The laser module is covered for 3 years or 10,000 hours (whichever comes rst). InstaCare provides the original owner one year of either limited 3 business day repair/return or next business day exchange.
IN THE BOX
User’s manual on CD-ROM, Important Info, lens adapter for NC lens, lens gear cover, Security Key for cabinet, Warranty Sheet
ORDERING MODEL NUMBERS
NP-PH1201QL
OPTICAL
Display Technology
Light Output (lumens)
Resolution Native Maximum Contrast Ratio (up to)
Laser Life (up to) Screen Size (diagonal) Throw Ratio L2K-10F1 NC-50LS12Z NC-50LS14Z NC-50LS16Z NC-50LS18Z NC-50LS21Z L2K-43ZM1 L2K-55ZM1
Projection Distance Projection Angle Lens* Zoom Zoom Ratio
Focus F-number, f-number L2K-10F1 NC-50LS12Z NC-50LS14Z NC-50LS16Z NC-50LS18Z NC-50LS21Z L2K-43ZM1 L2K-55ZM1
Shift
SIGNAL COMPATIBILITY/ CON NECTIVITY
Scan Rate
Horizontal Vertical Supported Video Standards SD/HD Video Signal Compatibility PC Signal Computability DisplayPort / HDMI
Macintosh Compatibility Input/Output Terminals Digital Digital Digital External Control Sync Compatibility
ELECTRICAL
Power Requirements
Input Current Power Consumption (ECO off/ECO Mode/Standby/ Standyby-Power Saving)
MECHANICAL
Optional Lenses Installation Orientation Dimensions (WxDxH) Net Weight Fan Noise Regulations
ENVIRONMENTAL
Operating Temperature Humidity Storage
ACCESSORIES
L2K-10F1 NC-50LS12Z NC-50LS14Z NC-50LS16Z NC-50LS18Z NC-50LS21Z L2K-43ZM1 L2K-55ZM1 NC-80DS02
1.38" DMD (3-chip DLP)
12,000 normal / Eco = variable
DC4K 4096x2160 QXGA 4096x2160 2000:1 with auto iris
20,000 hours 80 to 500 in. / 2.03 to 12.7m
0.9:1
1.13 - 1.66:1
1.30 - 1.85:1
1.45 - 2.17:1
1.63 - 2.71:1
1.95 - 3.26:1
3.70 - 5.30:1
4.80 - 7.40:1
Variable Variable
Powered w/Lens Memory Lens Dependent
Powered w/Lens Memory
TBD TBD
40.6 - 57.8mm
45.2 - 64.04mm
50.9 - 85.2mm
60.8 - 102.3mm TBD TBD
Powered +0.5/-0 vertical, +0.06/-0.08 horizontal
15 – 108 kHz 48 – 120 Hz NTSC, NTSC4.43, PAL, PAL-60, PAL-M, PAL-N, SECAM 1080p, 1080i, 720p, 576p, 576i, 480p, 480i
4096 x 2160p @ 60 / 59.94 / 50 / 30 / 25 / 24 / 23.98 Hz 3840 x 2160p @ 60 / 59.94 / 50 / 30 / 25 / 24 / 23.98 Hz 2048 x 1080p and 1920 x 1080 @ 60 / 59.94 / 50 / 30 / 25 / 24 / 23.98 Hz 2048 x 1080p and 1920 x 1080 @ 60 / 59.94 / 50 / 30 / 25 / 24 / 23.98 Hz 1920 x 1080i 60 Hz Yes
2 x HDMI w/HDCP 2 x DVI-D 2 x 3G-SDI RS-232, Wired Remote, USB (Service Port0) Separate Sync / Composite Sync / Sync on G
200 – 240V AC, 50/60Hz
8.2A 1608W
NC-50LS12Z, NC-50LS14Z, NC-50LS16Z, NC-50LS18Z, NC-50LS21Z, L2K-30ZM
Floor/Front, Floor/Rear, Ceiling/Front, Ceiling/Rear
27.5 x 36.8 x 12.7 in. / 700 x 935 x 323 mm
148.9 lbs. / 67.5 kg 48 dB USA: UL 1950 FCC Class B, Canada: CSA950 (C-UL), NOM
50° – 95°F / 10° – 35°C 20-80% non-condensing 14° – 122°F / -10° – 50°C
0.9:1 fixed lens
1.13 - 1.66 zoom lens
1.30 - 1.85 zoom lens
1.45 - 2.17zoom lens
1.63 - 2.71 zoom lens
1.95 - 3.89 zoom lens
3.70-5.30 zoom lens
4.80-7.40 zoom lens Quad HDSDI, 2 x DVI (HDCP)
* Lens does not ship with the projector. Additional accessories are available, including screens, carts, mount accessories and replacement cables. Visit www.necdisplay.com for details.
ECO Mode is a trademarks of NEC Display Solutions. HDMI, the HDMI Logo and High­Denition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC. All other brand or product names are trademarks or registered trademarks of their respective holders. Product specications subject to change.
©2015 NEC Display Solutions of America, Inc. and the NEC logo are registered trademarks of NEC.
Cat.No. 25.NEC.80.GL.UN.189 | Rev. 07.08.2015
NEC Display Solutions
500 Park Boulevard, Suite 1100 Itasca, IL 60143 866-NEC-MORE
www.necdisplay.com
Loading...