NEC C981Q SST User Manual
User’s Manual
C Series ShadowSense
TM
Touch
MultiSync C651Q SST
MultiSync C751Q SST
MultiSync C861Q SST
MultiSync C981Q SST
MONITOR MODEL: C651Q SST, C751Q SST, C861Q SST, C981Q SST
Please find your model name on the label on rear side of the monitor.
Index
Addendum to User’s Manuals of MultiSync C651Q, MultiSync C751Q, MultiSync C861Q &
MultiSync C981Q ……………………………………………….…………………………….. Page 03
Registration Information……………………………………………………………………….. Page 04
Important Information………………………………………………………………………….. Page 06
Safety Precautions, Maintenance & Recommended Use…………………………………. Page 07
Shipping Content………………………………………………………………………………..Page 08
Unpacking………………………………………………………………………………………. Page 09
General Installation…………………………………………………………………………….. Page 10
Connections…………………………………………………………………………………….. Page 11
Troubleshooting……………..…………………………………………………………………..Page 13
Specifications – C651Q SST …………………………………………………………………. Page 16
Specifications – C751Q SST …………………………………………………………………. Page 19
Specifications – C861Q SST …………………………………………………………………. Page 22
Specifications – C981Q SST …………………………………………………………………. Page 25
Manufacturer’s Recycling and Energy Information…………………………………………. Page 28
Addendum to User’s Manuals of MultiSync Cxx1Q
This user’s manual is an addendum to the standard user’s manual of the base model monitors C651Q,
C751Q, C861Q and C981Q.
All specifications listed here supersede those in the standard version of the manual included with this
monitor.
NOTE: Following feature sets are not supported by the Cxx1Q SST models:
- Table Top Stand Option: Other than the standard monitor, the Cxx1Q SST models do not allow for
table top installations, as the weight and dimensions of monitor are different from the base models.
- Room Light Sensing Sensor: Other than the standard monitor, the Cxx1Q SST models do not
allow the monitor to make automatic adjustments to the backlight setting.
- NEC ornament logo: Other than the standard monitor, the Cxx1Q SST models do not have an
ornament logo. Therefore changing the position of the NEC logo is not possible.
Registration Information
Cable Information
CAUTION: Use the provided specified cables with this product so as not to interfere with radio and
television reception. For USB please use a shielded signal cable with ferrite core. For HDMI,
DisplayPort and D-Sub 9-pin, please use a shielded signal cable. For Audio, please use a signal cable
with ferrite core. Use of other cables and adapters may cause interference with radio and television
reception.
DECLARATION OF CONFORMITY
Windows is a registered trademark of Microsoft Corporation.
NEC is a registered trademark of NEC Corporation.
MultiSync is a trademark or registered trademark of NEC Display Solutions, Ltd. in Japan and other
countries.
DisplayPort and DisplayPort Compliance Logo are trademarks owned by Video Electronics Standards
Association in the United States and other countries.
All other brands and product names are trademarks or registered trademarks of their respective
owners.
The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are
trademarks or registered trademarks of HDMI Licensing Administrator, Inc. in the United States and
other countries.
Trademark PJLink is a trademark applied for trademark rights in Japan, the United States of America
and other countries and areas.
microSD and microSD SDHC logos are trademarks of SD-3C, LLC.
CRESTRON and CRESTRON ROOMVIEW are trademarks or registered trademarks of Crestron
Electronics, Inc. in the United States and other countries.
Raspberry Pi is a trademark of the Raspberry Pi Foundation.
Adobe and the Adobe logo are either registered trademarks or trademarks of Adobe Systems
Incorporated in the United States and/or other countries.
GPL/LGPL Software Licenses
The product includes software licensed under GNU General Public License (GPL), GNU Lesser
General Public License (LGPL), and others. For more
information on each software, see “readme.pdf” inside the “about GPL&LGPL” folder on the supplied
CD-ROM.
Registration Information
Cable Information
CAUTION: Use the provided specified cables with this product so as not to interfere
with radio and television reception. For USB please use a shielded signal cable with ferrite
core. For HDMI, DisplayPort and D-Sub 9-pin, please use a shielded signal cable. For
Audio, please use a signal cable with ferrite core. Use of other cables and adapters may
cause interference with radio and television reception.
DECLARATION OF CONFORMITY
Windows is a registered trademark of Microsoft Corporation.
NEC is a registered trademark of NEC Corporation.
MultiSync is a trademark or registered trademark of NEC Display Solutions, Ltd. in Japan
and other countries.
DisplayPort and DisplayPort Compliance Logo are trademarks owned by Video
Electronics Standards Association in the United States and other countries.
All other brands and product names are trademarks or registered trademarks of their
respective owners.
The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are
trademarks or registered trademarks of HDMI Licensing Administrator, Inc. in the United
States and other countries.
Trademark PJLink is a trademark applied for trademark rights in Japan, the United States
of America and other countries and areas.
microSD and microSD SDHC logos are trademarks of SD-3C, LLC.
CRESTRON and CRESTRON ROOMVIEW are trademarks or registered trademarks of
Crestron Electronics, Inc. in the United States and other countries.
Raspberry Pi is a trademark of the Raspberry Pi Foundation.
Adobe and the Adobe logo are either registered trademarks or trademarks of Adobe
Systems Incorporated in the United States and/or other countries.
GPL/LGPL Software Licenses
The product includes software licensed under GNU General Public License (GPL), GNU
Lesser General Public License (LGPL), and others. For more
information on each software, see “readme.pdf” inside the “about GPL&LGPL” folder on
the supplied CD-ROM.
Important Information
This symbol warns user that uninsulated voltage within the unit may have sufficient magnitude to cause
electric shock. Therefore, it is dangerous to make any kind of contact with any part inside this unit.
This symbol alerts the user that important literature concerning the operation and maintenance of this unit
has been included. Therefore, it should be read carefully in order to avoid any problems.
CAUTION: Please use the power cord provided with this display in accordance with the table below. If a
power cord is not supplied with this equipment, please contact NEC. For all other cases, please use the power
cord with the plug style that matches the power socket where the monitor is located. The compatible power cord
corresponds to the AC voltage of the power outlet and has been approved by, and complies with, the safety
standards in the country of purchase.
This equipment is designed to be used with a power cord that has a protective earth pin connected to earth. If the
power cord is not connected to the earth, it may cause electric shock. Please make sure the power cord is
earthed properly.
* When operating this monitor with its AC 125-240V power supply, use a power supply cord that matches the
power supply voltage of the AC power outlet being used.
NOTE: This product can only be serviced in the country where it was purchased.
Use the power cord which has BSMI mark at both ends when you use this monitor in Taiwan.
• The intended primary use of this product is as an Information Technical Equipment in an office or domestic
environment.
• The product is intended to be connected to a computer and is not intended for the display of television
broadcast signals.
Safety Precautions, Maintenance & Recommended Use
Safety Precautions and Maintenance
Refer to the instruction explained on page English-3 of the standard user’s manual of the monitor.
Cleaning the Glass Surface
• The glass surface should be cleaned regularly with a soft, lint free cloth.
• It is recommended to use an anti-static plastic and glass cleaner suited for PMMA/acrylic
glass/Plexiglas, or water with a small amount of washing-up liquid.
Cleaning the Cabinet
• Unplug the power supply.
• Gently wipe the cabinet with a soft cloth.
• To clean the cabinet, dampen the cloth with a neutral detergent and water, wipe the cabinet and
follow with a dry cloth.
NOTE: DO NOT clean with benzene thinner, alkaline detergent, alcoholic system detergent, wax,
polish cleaner, soap powder or insecticide. Rubber or vinyl should not be in contact with the cabinet for
an extended period of time. These types of fluids and materials can cause paint to deteriorate, crack or
peel.
Shipping Content
MultiSync C651Q SST
1. 65” ShadowSenseTMTouch Monitor
2. SST Pen & Eraser Kit
3. Remote Control
4. CD-ROM (User Guides/Manuals)
5. Addendum to User’s Manuals
6. Power Cable
7. DisplayPort Cable
8. 2x USB Cable 300cm
MultiSync C751Q SST
1. 75” ShadowSenseTMTouch Monitor
2. SST Pen & Eraser Kit
3. Remote Control
4. CD-ROM (User Guides/Manuals)
5. Addendum to User’s Manuals
6. Power Cable
7. DisplayPort Cable
8. 2x USB Cable 300cm
MultiSync C861Q SST
1. 86” ShadowSenseTMTouch Monitor
2. SST Pen & Eraser Kit
3. Remote Control
4. CD-ROM (User Guides/Manuals)
5. Addendum to User’s Manuals
6. Power Cable
7. DisplayPort Cable
8. 2x USB Cable 300cm
MultiSync C981Q SST
1. 98” ShadowSenseTMTouch Monitor
2. SST Pen & Eraser Kit
3. Remote Control
4. CD-ROM (User Guides/Manuals)
5. Addendum to User’s Manuals
6. Power Cable
7. DisplayPort Cable
8. 2x USB Cable 300cm
Unpacking
Unpacking the Display
Unpack the display (C651Q SST, C751Q SST, C861Q SST and C981Q SST) from the carton box by
removing the white clips on the bottom of the box.
NOTE: Due to the weight of the product, for installation and handling 4 people are required. DO NOT
start unless you have enough people available. Working with less people may result in injuries and
damaged product.
Lift the carton box upwards. Make sure to have one additional person to secure the display from
tipping over.
NOTE: Remember to save your original box and packing material to transport or ship the monitor.
For further instructions, please refer to the printed instruction on the carton box.
Loading...