NEC DT820, SL2100, ITY-6D, 8IPLD, ITY-8LDX Quick Install Manual
...
The SL2100
Quick Install Guide:
Multiline IP Terminals
www.nec-enterprise.com
Quick Install Guide – SL2100 Multiline IP Terminals rev 1.1
2 NEC SL2100 Communication System
Quick Start Guide:
Multiline IP Terminals
DT820 Phones (ITY-6D/ITY-8LDX)
8IPLD DESI-Less Phone
Note: For more information on your SL2100 Communications System and NEC Multiline IP Terminal,
including Quick User Guides and User Guides, navigate to your phone’s Support page on the NEC
Businessnet Portal.
Quick Install Guide – SL2100 Multiline IP Terminals rev 1.1
NEC SL2100 Communication System 3
This guide explains the installation, configuration and operation of the SL2100 Multiline IP Telephones.
Further information for the SL2100 platform is available on BusinessNet.
Please keep all information supplied for future reference.
Regulatory Notice.
Refer to the Declaration of Conformity, Regulatory and Safety Considerations shown in the SL2100 Hardware
Manual.
Warning: This is a class A product. In a domestic environment this product may cause radio interference in which
case the user may be required to take adequate measures.
Other Documentation available:
SL2100 Hardware Manual
SL2100 Features and Specifications Manual
SL2100 Networking Manual
Quick Install Guide – SL2100 Multiline IP Terminals rev 1.1
4 NEC SL2100 Communication System
Contents
SL2100 Multiline IP Terminals ............................................................................................................................... 5
Parts available for the SL2100 ........................................................................................................................... 6
1- Package Contents .............................................................................................................................................. 6
2- Features ............................................................................................................................................................... 7
3- System Connection Overview ........................................................................................................................... 9
4- Connect the Multiline IP Terminal ..................................................................................................................... 9
5- Applying Power to the Multiline IP Terminal ................................................................................................... 9
Ethernet sockets for VOIP ................................................................................................................................10
Check the IP Address of the SL2100 ...............................................................................................................11
6- IP7WW-8IPLD-C1 DESI-Less IP Terminal Leg Adjustment .......................................................................... 12
Low Position Setting .........................................................................................................................................12
High Position Setting ........................................................................................................................................13
7- DT820 IP Terminal Leg Adjustment (ITY-6D-1 and ITY-8LDX-1) .................................................................. 14
Low Position Setting .........................................................................................................................................14
High Position Setting ........................................................................................................................................15
8- Wall Mounting Multiline IP Terminals ............................................................................................................. 16
9- Multiline IP Terminal Configuration ................................................................................................................ 18
Multiline IP Terminal Boot Sequence ...............................................................................................................18
Multiline IP Terminal Programming Interface ...................................................................................................19
Configure 8IPLD Multiline IP Terminal .............................................................................................................20
Configure DT820 Multiline IP Terminals ..........................................................................................................24
Quick Install Guide – SL2100 Multiline IP Terminals rev 1.1
NEC SL2100 Communication System 5
SL2100 Multiline IP Terminals
The SL2100 system consists of a chassis unit with a dedicated slot for the CPU
card and four universal slots for interface cards. Each universal slot supports an
extension interface card, each extension interface card can have an optional trunk
interface daughter card mounted.
Interface cards are available for Analogue and ISDN trunks, proprietary SL2100
terminals and analogue telephones.
The chassis unit is ventilation cooled (no fan) and can be wall mounted or rack
mounted with the optional rack mount shelf. Up to three chassis units can be
connected together to provide a total of twelve universal slots.
Multiline IP terminals are supported without the need for additional system
hardware as eight VoIP resources are built in to the CPU card. VoIP resources can
be expanded to 16 by adding the optional VOIPDB card and further to 128 with
licenses.
All equipment will operate in the default/factory setting when the SL2100 is installed.
With the default settings:
Each telephone will function and is assigned an extension number.
Calls received on the SIP trunk lines will ring at telephone number 200.
Each telephone can make outside calls by dialling 9.
Each trunk line is presented at a Function Key with busy lamp indication.
The system can be easily modified using SL2100 PCPro which has Quick Installation wizards for the majority of
system settings.
This guide details the installation of the following Multiline IP Terminals:
8IPLD
DT820
ITY-6D
ITY-8LDX
Part code & description
BE116517
IP7WW-8IPLD-C1 TEL(BK)
BE115113
ITY-6D-1P(BK)TEL
BE115114
ITY-8LDX-1P(BK)TEL
Connected to
Ethernet Port at LAN
(10M/100M/1000G)
Ethernet Port at LAN
(10M/100M)
Ethernet Port at LAN
(10M/100M)
Colour
Black
Black
Black
Programmable Keys
32 6 8
Soft Keys 4 4
4
LCD
168 x 128 Dots with Backlight
168 x 41 Dots with Backlight
168 x 128 Dots with Backlight
Hands free
Full-Duplex
Full-Duplex
Full-Duplex
Interfaces
2 (1 x LAN and 1 x PC Ethernet
Port (10Base T/100Base
TX/1000Base TX)
2 (1 x LAN and 1 x PC Ethernet
Port (10Base T/100Base TX)
2 (1 x LAN and 1 x PC Ethernet
Port (10Base T/100Base TX)
Power Feeding
PoE (IEEE802.3af) Only
PoE (IEEE802.3af) Only
PoE (IEEE802.3af) Only
CODEC Support
G.711/G.729a
G.711/G.729a
G.711/G.729a
Backlit Dial pad
No
No
No
Headset Port
Yes
Yes
Yes
Angle Adjustment
2 Positions
2 Positions
2 Positions
Wall Mounting Kit
IP4WW-WALL MOUNT UNIT
(Optional BE110790)
IP4WW-WALL MOUNT UNIT
(Optional BE110790)
IP4WW-WALL MOUNT UNIT
(Optional BE110790)
EHS Support
By EHS Cable (Plantronics
APD-80
By EHS Cable (Plantronics
APD-80
By EHS Cable (Plantronics
APD-80
License
Built-in Terminal
NEC SIP License
EU9093881
NEC SIP License
EU9093881
1
Requires one license per Terminal.
Quick Install Guide – SL2100 Multiline IP Terminals rev 1.1
6 NEC SL2100 Communication System
Parts available for the SL2100
Not all parts are included within this guide, please refer to the other available SL2100 Quick Install Guides or the
SL2100 Hardware Manual for a full description and installation instructions of all parts available.
Please refer to Prophix for all parts and licenses available in your region.
1- Package Contents
IP7WW-8IPLD-C1 DESI-Less Multiline IP Terminal
1 x IP7WW-8IPLD-C1 Multiline IP Terminal 1 x Declaration of Conformity
Additional Items Required:
Ethernet (cat5e/cat6) cable(s)
ITY-6D-1 (BK) TEL Multiline IP Terminal
1 x ITY-6D-1 Multiline IP Terminal 1 x Declaration of Conformity
Additional Items Required:
Ethernet (cat5e/cat6) cable(s)
NEC SIP License (Installed on SL2100)
ITY-8LDX-1 (BK) TEL Multiline IP Terminal
1 x ITY-8LDX-1 Multiline IP Terminal 1 x Declaration of Conformity
Additional Items Required:
Ethernet (cat5e/cat6) cable(s)
NEC SIP License (Installed on SL2100)
Quick Install Guide – SL2100 Multiline IP Terminals rev 1.1
NEC SL2100 Communication System 7
2- Features
IP7WW-8IPLD-C1 Multiline IP Terminal
ITY-6D-1 Multiline IP Terminal
Quick Install Guide – SL2100 Multiline IP Terminals rev 1.1
8 NEC SL2100 Communication System
ITY-8LDX-1 Multiline IP Terminal
Quick Install Guide – SL2100 Multiline IP Terminals rev 1.1
NEC SL2100 Communication System 9
3- System Connection Overview
The Multiline IP terminals are connected via a PoE switch.
4- Connect the Multiline IP Terminal
1. Connect the LAN Network 10-Base-T/100Base-TX/1000Base-TX cable to the LAN(=) connector.
2. Power provisioning is provided by PoE, and AC/DC is not used.
3. The Multiline IP Telephones have a Switching Hub to connect a PC to the LAN network. Connect the
10Base-T/100Base-TX/1000Base-TX straight through cable used for connection to the PC to the PC(X)
connector and to the PC.
5- Applying Power to the Multiline IP Terminal
The Multiline IP Terminals support PoE power provisioning for the telephone.
PoE(IEEE802.3af)
PoE (Power Over Ethernet) is a LAN technology that allows standard 10-Base-T/100BaseTX/1000Base-TX data cables to pass electrical current from a power source to a requesting end device.
Loading...