Nec Aspire And Aspire - S - - Donated By Pete And - Shawna Aspire Single Line - Telephone Quick Reference Guide
0894306 - 1
0
WXYZTUVPQRS
MNOJKLGHI
ABC DEF
Program
Redial
Flash
Using Your Single Line Telephone
Placing Calls
Due to the flexibility built into the system, your Dialing Codes and
Feature Capacities may differ from those in this guide. Check with
your communications manager and make a note of any differences.
* The NEC Analog Single Line Telephone is displayed here. This guide
contains general analog phone procedures. Refer to the user guide included
with your specific analog phone for details on additional key functions.
Placing an Outside Call . . .
Dial codes for outside
lines:
1. Lift handset.
Listen for dial tone.
•
2. + Outside number.
When behind a PBX, you may have to
•
dial another 9 before your number.
OR
2. + Line group number
(1-9 or 001-200) + Outside number.
When behind a PBX, you may have to
•
dial 9 before your number.
OR
2. + Line number (e.g., 005 for
line 5) + Outside number.
When behind a PBX, you may have to
•
dial 9 before your number.
Calling a Co-Worker, Voice Mail and Paging . . .
Dial using the
Intercom:
1. Lift handset.
2. Dial co-worker’s extension number.
Your call will ring or voice-announce.
•
If you hear ringing, wait for an
answer. If you hear two beeps, begin
speaking. Dialing 1 changes mode.
OR
2. For Paging, dial + 0 for All Call
or 1-64 for zones.
OR
2. To call your mailbox, dial .
Answering Calls
If your call doesn’t go through . . .
Camp On and Callback
When you hear sys-
tem busy, use Camp
On or Callback:
1. to Camp On (wait without hanging up).
(Intercom calls) If you hear two beeps,
•
you can speak. If you hear busy/ring, dial
6 to send a Voice Over.
(Outside calls) When you hear new
•
dial tone, place your call again.
OR
1. and hang up to leave a Callback for
a free line or extension.
Wait for the system to call you back.
•
2. Lift handset when the system rings you back.
(Outside calls) Place your call again.
•
(Intercom calls) Speak to co-worker.
•
To cancel your Callback:
1. Lift handset.
2. + Hang up.
Answering Outside Calls . . .
Listen for two rings:
1. Lift handset.
Answering Intercom Calls . . .
Listen for ringing:
1. Lift handset to speak.
Picking up calls not ringing your phone . . .
If a call is ringing
Paging after hours:
When a call is ringing
a co-worker’s phone:
1. Lift handset.
2. + .
1. Lift handset.
2. + Co-worker’s extension.
Message Waiting (Direct Messaging)
Leave a Message
Waiting when your co-
worker doesn’t answer:
To answer a Message
Waiting left for you:
1. Do not hang up + .
Your co-worker’s MW flashes fast.
•
With Voice Mail, dial 8 to leave a
•
message in your co-worker’s mailbox.
1. Lift handset + .
To cancel all your messages (those you
•
left and those left for you), dial 873.
Have a telephone meeting (Conference) . . .
Use Conference to
have a telephone
meeting:
1. Place or answer call + Hookflash +
.
2. Place/answer next call + Hookflash +
.
You may have up to 32 callers. Your soft-
•
ware determines if there is any restriction
on the number of outside parties. Repeat
this step to add more parties.
3. After adding all parties, Hookflash twice to
set up the Conference.
Quick Reference for Other Features
Do Not Disturb:
Meet Me Conference:
Park and Page:
Personal Greeting:
Tones you may hear . . .
847 + 1 to block your outside calls
2 to block Paging, Intercom calls, Call
Forwards and transferred outside calls
3 to block all calls
4 to block Call Forwards
0 to cancel
To set up: While on a call, HOOOKFLASH + # +
1 + Page party and announce zone + (When co-
worker answers) HOLD twice
To join: Lift handset + 864 + Announced zone
Lift handset + ✻ 47 + Record Personal Greeting +
# + 7 + Record Page + # + Dial Page zone (e.g.,
801 + 1 for zone 1) + 2 (All) or 3 (CO) + Hang up
To cancel: Lift handset + ✻ 47 + 3 + Hang up
To pick up: Lift handset + ✻ ✻ + Announced
extension number
Lift handset + ✻ 47+ Record Personal Greeting +
# + 2 (Busy/No Answer), 4 (Immediate) or 6 (No
Answer) + Extension to receive calls + 2 (All) or 3
(CO) + Hang up
To cancel: Lift handset + ✻ 47 + 3 + Hang up
One long tone and a
voice while on a call:
Error (fast busy) tone:
Stutter dial tone:
A co-worker is sending you a Voice Over.
This means you made a mistake in placing a call
or using a feature. Hang up and start over.
When you lift the handset: Your phone is forwarded.
When using features: Your option has been accepted.
Handling Your Calls
Your call can wait at your phone . . .
Personal Abbreviated Dialing Directory
To program: Lift handset + + Bin (0-9) + Trunk
access code + Number to store + Hang up
To use: Lift handset + + Bin (0-9)
Bin Access Code Number
0
1
2
3
4
5
6
7
8
9
NEC America, Inc., Corporate Networks Group
4 Forest Parkway, Shelton, CT 06484
TEL: 203-926-5400 FAX: 203-929-0535
cng.nec.com
Hold
Use Hold instead of
leaving the handset
off-hook:
Easily retrieve a call
from Hold:
1. Do not hang up + Hookflash + Do not
hang up.
This puts your call on Exclusive Hold.
•
To place the call on Group Hold (so only
•
those in your Department can pick up the
call), dial 832 after pressing HOOKFLASH.
Intercom calls automatically go on
•
Exclusive Hold when you press
HOOKFLASH.
1. Lift handset and press .
To retrieve a call from Group Hold,
•
dial 862 instead of pressing HOOKFLASH.
Transferring your calls . . .
Transfer
Send (Transfer) your
call to a co-worker:
1. Hookflash + Dial your co-worker’s
extension.
To transfer the call to a co-worker’s
•
mailbox, dial the Voice Mail master
number before their extension.
2. (Optional) Announce the call when your
co-worker answers.
3. Hang up.
*0893406*
0893406
April 8, 2003
Printed in U.S.A.
Park a call in orbit . . .
Forward your calls to a co-worker . . .
Park a call in orbit so a
co-worker can pick it
up:
Or pick up a call a co-
worker parked for you:
1. Do not hang up.
Park a call in a System Orbit
2. Hookflash + + Park Orbit.
Park Orbits are 01-64.
•
3. Page your co-worker to pick up the call.
For Paging, dial ✻1 + 0 for All Call
•
or ✻1 + 1-64 for zones.
4. Hang up.
1. Lift handset.
For a Call Parked in a System Orbit
2. + Park Orbit.
Park Orbits are 01-64.
•
OR
For a Call Parked in a Personal Park Orbit
When Parked at a co-worker’s phone . . .
2. + Announced extension.
While at your desk,
forward your calls to a
co-worker or Voice
Mail:
1. Lift handset + .
2. Dial Call Forwarding condition:
1 = Personal Answering Machine Emulation
(then skip to step 4)
2 = Busy or not answered
4 = Immediate
6 = Not answered
7 = Immediate w/simultaneous ringing
(not for Voice Mail)
0 = Cancel
3. Dial destination extension, Voice Mail
master number or press Voice Mail key.
4. Dial Call Forwarding Type:
2 = All calls
3 = Outside calls only
4 = Intercom calls only
To forward off-premise: ✻46 + Line
•
access (e.g., 9) + Number + Hang up.
To cancel: ✻46 + Hang up.
Automatically redial calls . . .
Last Number Redial
Quickly redial your
last outside call:
1. Lift handset + .
The system selects an outside line.
•
Save
Save your call for
quick dialing later on:
Quickly redial your
saved number:
1. While on a call, HOOKFLASH +
.
1. Lift handset + .
When redialing, the system selects an
•
outside line for you. To clear a saved
number: Lift handset + 885
Quickly dial co-workers and outside calls . . .
Common and Group Abbreviated Dialing (Speed Dial)
To dial your stored
Abbreviated Dialing
numbers:
Personal Abbreviated Dialing (Speed Dial)
To store your Personal
Abbreviated Dialing
numbers:
To dial your stored
Personal Abbreviated
Dialing numbers:
(You cannot store Common or Group
Abbreviated Dialing numbers.)
1. Lift handset.
2. + Bin (for Common).
OR
2. + Bin (for Group).
1. Lift handset + .
2. Bin (0-9) + Trunk access code + Number
to store.
Trunk access codes are 9, #9 + trunk
•
number and 804 + trunk group.
The total number of digits stored can-
•
not exceed 24.
3. Hang up.
1. Lift handset + + Bin (0-9).
The stored number dials out.
•
Analog Single Line (SLT)
Quick Reference Guide
Loading...