NEC Digital Single Line, Analog Single Line User Guide
Digital Single Line (DSL)
Analog Single Line (SLT)
Quick Reference Guide
92600DSL05
April 2001
Printed in U.S.A. (2562)
O
920-108H
Using Your Digital Single Line Telep
Due to the flexibility built into the system,
your Dialing Codes and Feature
Capacities may differ from those in this
guide. Check with your communications
manager and make a note of any differences.
Lift the Handset to place
and answer calls.
These Volume Controls
are for speaker and handset.
Press then to automatically
redial the last number you called.
Use the Dial Pa
outside calls and
While on a call, press then
to automatically save the number you
just dialed.
Press then to automatically
redial the saved number later on.
DEF
MNO
WXY
ABC
JKLGHI
TUV
VOL HOLD
PARK
FTR
SAVEREDIAL
PRS
OPER
3
6
9
#
2
54
87
O
1
On SLTs, whenever you see in this
guide hookflash (press and release
hookswitch) instead.
On DSLs, press to place a call on
System, Exclusive or Group Hold. See
Handling Your Calls for more.
Press for the feature key functions
in blue: Last Number Redial, Save and
Park.
flashes when you have Message
Waiting or Voice Mail messages left for
you.
Use Handsfree Answerback to answer a voice-announced Intercom call by
•
speaking toward your phone — without lifting the handset.
Handsfree Answerback
is on when:
You have left a Message Waiting for a
•
co-worker.
You are using Last Number Redial,
•
Save or Park.
Speak toward the Microphone to respond
to voice-announced Intercom calls.
Placing Calls
Placing an Outside Call . . .
Dial codes for outside
lines:
1. Lift handset.
Listen for dial tone.
•
2. + Outside number.
When behind a PBX, you may have to
•
dial another 9 before your number.
OR
2. + Line group number (19 or 01-99 or 001-128) + Outside number.
When behind a PBX, you may have to
•
dial 9 before your number.
OR
2. + Line number (e.g., 05 or
005 for line 5) + Outside number.
When behind a PBX, you may have to
•
dial 9 before your number.
Calling a Co-Worker, Voice Mail and Paging . . .
Dial using the
Intercom:
1. Lift handset.
2. Dial co-worker’s extension number.
Your call will ring or voice-announce.
•
If you hear ringing, wait for an
answer. If you hear two beeps, begin
speaking. Dialing 1 changes mode.
OR
2. For Paging, dial + 0 for All Call
or 1-64 for zones.
OR
2. To call your mailbox, dial .
Loading...