Neato MEET YOUR NEATO Instruction manual

MEET YOUR NEATO •
RENCONTRER VOTRE

NEATO • CONOZCA SU
NEATO

INTRODUCING NEATO

PRÉSENTATION DE NEATO

PRESENTACIÓN DEL NEATO

Congratulations on your new home
robot! Neato can’t wait to start
vacuuming – so you don’t have to.
This guide introduces you to Neato’s
features and gives you some import­ant pointers to set up and maintain
your robot.

And don't forget to register your
Neato at www.neatorobotics.com
to activate your Warranty and get
product updates and special oers.

Leave the vacuuming to Neato.
What will you do with your free
time?

Félicitations pour votre nouveau
robot domestique ! Neato est im­patient de commencer à passer
l'aspirateur, donc vous n'avez pas à
le faire. Ce guide vous présente les
fonctionnalités de Neato et vous don­ne quelques conseils importants pour
installer et entretenir votre robot.

Et n'oubliez pas d'enregistrer votre
Neato sur www.neatorobotics.com
pour activer votre garantie et obtenir
des mises à jour de produits et des
ores spéciales.

Laissez Neato passer l'aspirateur.
Qu'allez-vous faire de votre temps
libre?

¡Enhorabuena por su nuevo robot
doméstico! Neato está deseando
empezar a aspirar por usted. Esta
guía le presenta las funciones de
Neato y le proporciona indicaciones
importantes para montar y mantener
el robot.

No olvide registrar su Neato en
www.neatorobotics.com para ac­tivar la Garantía y obtener actual­izaciones del producto y ofertas
especiales.

Deje que sea Neato quien aspire.
¿Qué hará con su tiempo libre?

Go to page 1

Allez à la page 5

Vaya a la página 9

SETTING UP YOUR NEATO See inside back cover for pictures that show the robot parts.

IMPORTANT! Remove the
protective film from Neato’s

1

screen and charge base. If
the films are left on, the
robot may not be able to
see your home or find its
charge base.

Plug the power cord
securely into the

2

charge base.

Adjust the length of the
cord by wrapping it
as shown.

IMPORTANT! Open the dirt

3

bin and push DOWN on the
Battery ON/OFF switch.

BATTERY

ON/OFF
SWITCH

OFF

ON

Choose a wall outlet that has a
3' (1 m) clearance on both sides

4

and in front of the charge base.
This helps your robot find the
charge base.

Plug in the power cord and push the
charge base against the wall. Place the
rounded side of your Neato against the
metal contacts on the charge base.

Find your language using

5

arrows to the right of the
screen.

Press SELECT
button under the
screen to choose
a language.

GETTING STARTED • English PAGE 1

CHARGING AND
OPTIMIZING THE BATTERY

CONFIGURING YOUR
NEATO

• Before using, charge your Neato
overnight – about 12 hours.

• IMPORTANT! To get the most
from your battery, charge it and
discharge it completely two to
three times.

• Always put your Neato back on its
charge base when you are finished

cleaning.

Status Lights

SOLID GREEN

Fully charged and ready to clean.

BLINKING GREEN
Charging, battery not fully charged,
can clean.

BLINKING AMBER
Charging, can’t clean yet.

• Wake up Neato by pressing the
button. It may take a few seconds to
wake up.

• From the home screen, press the

SELECT button to get to the MENU.

Clock

• Select Set Clock and follow screens

to set the time.

Schedule

• Select Schedule.

• Choose Set or Change and follow

the screens to schedule cleaning.

SOLID AMBER
Error, see message on screen.

GETTING STARTED • English PAGE 2

MAKING YOUR HOME
NEATO FRIENDLY

• Clear the area of small items like
toys and clothing–furniture is OK.
Tie up wires, curtains and other
low-hanging items.

• To keep your robot out of places
you don't want it to go, set down
boundary markers included in the
package. You can cut them to fit.

• IMPORTANT! Keep your robot away
from liquids and wet areas. Move or
cover pet bowls and plant trays.

• Keep your Neato inside the house.
It was not designed for outdoor
cleaning or freezing temperatures.

USING YOUR NEATO

Wake Up

• Press the button to “wake up”
your Neato.

Start Cleaning

• CLEAN House -

Press the button
to clean your house.

• CLEAN Spot –

Press the button to
clean a 4’ (1.2 m) x 6’
(1.8 m) square in front
of your Neato.

Stop Cleaning

• Press or button.

• Press the arrows to highlight Stop

Cleaning.

• Press SELECT

using button
under the
screen on the

PAUSE Menu or
RESUME Menu.

Sleep

Hold the button down for 5
seconds to put your Neato to "sleep".

• Be aware that shiny surfaces and
black floors might confuse your
robot.

Pause Cleaning

• Press or button.

GETTING STARTED • English PAGE 3