Navman PocketPC User Manual

Smart

™

2005

English - Europe / Australia / New Zealand

for Pocket PC

User Manual

Smart 2005 for Pocket PC | User Manual

Contents

1. Introduction ............................................................................ 5

Upgrading from Previous Version of Smart

 ......................... 6

2. Pocket PC Features ...............................................................

3. Installing Smart

 .................................................................. 9

4. Smart

 Desktop ................................................................. 11

5. Updating Smart

 ............................................................... 12

6. Installing and Removing Maps Using Smart

 Desktop ..... 13

7. Starting Smart

 .................................................................. 16

8. GPS Setup ..........................................................................

9. Setting your Destination ...................................................... 21

10. Using the 2D Map Screen to Plan a Route .........................

11. Trip Planner ......................................................................... 30

12. Viewing your Route ............................................................ 33

13. Map Screen Pop-up Menu ................................................. 39

14. Avoiding an Area ................................................................ 40

15. Route Demonstrator ............................................................ 41

16. Trip Meter ............................................................................ 42

17. Favourites and Quick Navs ................................................. 43

18. Settings ............................................................................... 45

19. Smart

 Desktop Advanced Features ............................... 52

20. Continuous Continental Navigation ..................................... 57

21. Improving Performance ....................................................... 59

22. Accessories ........................................................................ 60

Appendix: Street Types ............................................................ 61

Support Information ................................................................. 61

Compliance ............................................................................... 64

Smart 2005 for Pocket PC | User Manual

Getting started

1. Introduction

Thank you for purchasing Smart 2005 for Pocket PC. We hope you enjoy using your new GPS navigation software. Whether you travel in your own country or elsewhere, Smart will direct you to your destination without

the need for map books and second-hand instructions. The Global Positioning System (GPS) is available free of charge, at any time, and is accurate to within 5 m (15 ft). Your Smart map provides street-level detail for door-to-door navigation, including Points Of Interest (POIs) such as accommodation, railway stations and airports.

Use this manual to help you install Smart

, learn how to operate it effectively and safely, and discover

the range of features available to you. Navman welcomes your feedback. To contact us or visit our website, see Support Information on page 64.

GPS and GPS Signals

The Global Positioning System `is a network of satellites that transmit accurate time and position information worldwide. GPS receivers receive signals from these satellites and use the information to determine an exact location.

Satellites orbit the earth at around 12,000 miles above the surface. While a GPS receiver can detect signals from up to 12 satellites at any time, only three signals are needed to provide a position or GPS “ﬁx” (latitude and longitude) for vehicle navigation systems.

Smart

 is designed to use GPS information to ﬁnd your current position, and calculate the best

route to your desired destination using the available road maps. Smart

 will then guide you with voice and visual commands to your destination using the continuous stream of GPS data to track your position.

The iCN GPS antenna receives GPS signals. To receive GPS signals, ensure that the iCN is outdoors, or in a vehicle outdoors, and the GPS antenna has an unobstructed view of the sky. The iCN can operate in all weather types except snowfall.

For details about reading the Smart GPS Status screen, see page 19.

Safety Notice

WARNING: In a vehicle, it is your sole responsibility to place, secure and use the Pocket PC in a

manner that will not cause accidents, personal injury or property damage. The user of this product is solely responsible for observing safe driving practices. It is your responsibility to read and follow the vehicle mount installation instructions and to use the product consistent with your government’s laws/regulations. Consult the vehicle manual to ensure the mounting location is safe.

It is your sole responsibility to adhere to the following safety instructions at all times:

• Do not operate the Pocket PC while driving or place the Pocket PC in a position that obstructs the driver’s view.

• Do not mount the Pocket PC in a way that may be distracting or interfere with the safe operation of the vehicle, the deployment of airbags or other safety equipment.

• Do not leave the Pocket PC in view while your vehicle is unattended, especially in strong or direct sunlight.

• Do not use or handle the Pocket PC when it is hot; leave it to cool, out of direct sunlight.

Failure to adhere to these instructions may lead to serious personal injury, including death, or property damage. Navman disclaims all liability for use of the iCN that contributes to injuries, death, property damage or violates law.

Smart 2005 for Pocket PC | User Manual

Getting started

Upgrading from Previous Version

of Smart

To upgrade your version of Smart to version 2005, you must ﬁrst uninstall previous versions of Smart

 Desktop from your computer and Smart from your Pocket PC. Your maps, Favourites,

Quick Navs and settings will be retained unless you are upgrading from Smart

 V1.90 (Product

Key: SSP-190-XXXXX-XXXXX) or 1.91 (Product Key: SSP-191-XXXXX-XXXXX)

Note: This upgrade procedure does not apply to PiN 570.

Complete the following steps to uninstall previous versions of Smart:

1. If you are upgrading Smart

 on a Navman PiN Pocket PC 100 or 300, go to step 6.

If you are upgrading a different model of Pocket PC, continue to step 2.

2. If you have Smart maps stored on a SD or MMC memory card, insert the memory card in your Pocket PC or memory card reader

3. Connect your Pocket PC to your computer using a USB cable, synchronisation cradle, or other device that came with your Pocket PC

• Microsoft

ActiveSync® will synchronise with your Pocket PC.

4. If you are upgrading from Smart

 V1.90 and 1.91 continue to step 5.

Otherwise go to step 7.

5. Versions 1.90 and 1.91 Only: The maps supplied with Smart

 V1.90 and 1.91 are not compatible with Smart 2005.

Complete the following to uninstall maps from your Pocket PC and memory card.

a. Open Smart Desktop on your computer:

Start

 Programs  Navman  Smart Desktop.

b. Use Smart

 Desktop to uninstall all maps from your Pocket PC and memory card.

c. Close Smart

 Desktop.

d. Go to step 7.

6. PiN 100 and PiN 300 Only:

a. Insert the memory card that came with your PiN in to your PiN.

b. Reset the PiN by using the stylus to press the RESET button on the left side of

the PiN.

c. Open File Explorer on your PiN: Start

 Programs  File Explorer.

d. Browse to the memory card.

e. Tap and hold the 2577 folder. Select Delete from the Pop-up menu.

f. Tap and hold the Navman folder. Select Delete from the Pop-up menu.

g. Close File Explorer.

h. Reset the PiN by using the stylus to press the RESET button on the left side of the PiN.

Smart 2005 for Pocket PC | User Manual

Getting started

7. Uninstall SmartST from your Pocket PC using the Remove Programs feature in your Pocket PC Windows

Settings panel:

Start

 Settings  System tab  Remove Programs.

8. Uninstall Navman SmartST Desktop from your computer if it has previously been installed, usin

g the Add or Remove Programs feature in your Windows Control Panel:

Start

 Control Panel  Add or Remove Programs.

Refer to subsequent chapters of this user manual to install and activate Smart

 2005, install new

maps and navigate to your destination.

Smart 2005 for Pocket PC | User Manual

Getting started

2. Pocket PC Features

4-Way Toggle

The style of the 4-way toggle differs between models of Pocket PC. It may be referred to as a navigation button or navigation stick; it may be a 5-way toggle. See your Pocket PC manual to

identify the 4-way toggle.

Note: The Acer® n30 Pocket PC does not have a toggle. To use Smart, you must first assign

Button 1

to <Scroll Right and Button 4 to <Scroll Left.

See your Acer n30 manual for information on how to assign buttons.

Touch-Screen

Use the stylus with the Pocket PC touch-screen to navigate and use the Main Menu options, set destination addresses and conﬁgure the GPS status. See your Pocket PC manual for information

on using the stylus with the touch-screen. Tap and hold the stylus on the 2D Map and 3D Map screens to activate the Pop-up menu.

See page 39 for information on the Pop-up menu.

Portrait vs. Landscape Screens

Microsoft Windows Mobile™ 2003 SE can display Smart in portrait or landscape mode. This manual shows most Smart screens primarily in portrait mode; however, where landscape

mode signiﬁcantly differs from portrait mode, both are shown.

Toggle Description

Left

Opens the Main Menu screen.

Right

Cycles through the navigation screens once a route has been calculated:

• 2D Map screen

• 3D Map screen

• Next Instruction screen

• Instruction List screen.

From the 2D Map screen, enables you to zoom in to view less of the street map, but with more detail.

From the

3D Map screen, with the Information button set to Angle,

enables you to increase the viewing angle.

Down

From the 2D Map screen, enables you to zoom out to view more of the street map, but with less detail.

From the

3D Map screen, with the Information button set to Angle,

enables you to decrease the viewing angle.

Smart 2005 for Pocket PC | User Manual

Getting started

3. Installing Smart

Begin by installing Smart Desktop on your computer. Then install and register Smart on your Pocket PC, activate and download the maps you require from Smart

 Desktop. You will need an

Internet connection to complete activation.

Note: Windows XP users, ensure XP Service Pack 1 or higher is installed before you install Smart Desktop.

Microsoft ActiveSync

Microsoft ActiveSync is used to establish a connection between your Pocket PC and your computer. Smart

 requires ActiveSync 3.7.1 or higher, which should have been included with your Pocket PC.

See your Pocket PC user manual for more information.

Step 1. Install Smart Desktop on your Computer

1. Close all open programs on your computer.

2. Insert the Smart

 CD into your computer CD-ROM drive. The Smart Desktop installer will start.

• If your computer does not automatically launch the CD, start the installation manually:

Start

 Run.

Type

D:\Setup SmartST 2005 for Pocket PC.exe where “D” is the letter assigned to your

CD-ROM drive. Click OK

3. Follow the screen prompts to install Smart

 Desktop.

• Select your preferred language for Smart Desktop when prompted.

• Review and accept the Licence Agreement for Smart

 Desktop when prompted.

• Select a destination folder when prompted.

Smart

 Desktop will open.

You are now ready to install and activate Smart

 on your Pocket PC.

Smart 2005 for Pocket PC | User Manual

Getting started

Step 2. Install and Activate Smart on your Pocket PC

1. Close all open programs on your Pocket PC.

2. Connect your Pocket PC to your computer via Microsoft ActiveSync 3.7.1 or higher.

• Microsoft ActiveSync will synchronise with your Pocket PC.

3. Open Smart

 Desktop if it is not already open:

Start

 Programs  Navman  Smart Desktop 2005 for Pocket PC.

4. Follow the prompts to install Smart on your Pocket PC.

PiN 570 only: When prompted for the default installation directory, click No. In the Save In box, select ROM Storage, then click OK.

Other Pocket PC models:

Smart must be installed in the default installation directory,

not a memory card.

5. If you connect to the Internet via a dial-up connection, connect to the Internet now.

6. Follow the prompts to register online and activate Smart on your Pocket PC.

• Review and accept the Privacy Notice when prompted.

• You will be prompted to enter your contact details so Navman can advise you when updates are released.

• Enter your Smart

 Application Key from the back of the CD box when prompted.

• Your computer will connect to the Internet and activate your Smart

 Application Key.

Your Pocket PC now contains Smart

 2005. You are now ready to install a map to your

Pocket PC or memory card.

Smart 2005 for Pocket PC | User Manual

Getting started

4. Smart Desktop

Smart Desktop is used to manage maps to and from your Pocket PC, obtain software updates, manage Custom Points of Interest (POIs) and install Basemaps.

To Open Smart Desktop

Once Smart Desktop has been installed, you can access it from the Start menu:

Start  Programs  Navman  Smart Desktop 2005 for Pocket PC

Uninstalling Smart Desktop from your Computer

We recommend that you use the Add or Remove Programs feature in your Windows Control Panel:

Start  Control Panel  Add or Remove Programs

Uninstall:

SmartST Desktop 2005 for Pocket PC

Map information

Selected maps

Download selected maps to the Pocket PC, memory card or memory card reader (not supplied).

Map Display screen

Map Colour Key

Desktop and Pocket PC tabs

Smart 2005 for Pocket PC | User Manual

Getting started

5. Updating Smart

Update your Smart software to the most recent version by accessing the Navman website through Smart

 Desktop.

To update your Smart

 software, complete the following steps:

1. If you connect to the Internet via a dial-up connection, connect to the Internet now.

2. Open Smart Desktop:

Start

 Programs  Navman  Smart Desktop 2005 for Pocket PC

3. On the Setup menu, select Update software then Check for updates on the web. Your computer will connect to the Internet and display the Navman website.

4. Download the update for your region to your computer, if available.

5. On the Setup menu, select Update software then

Update software on Pocket PC.

Follow the prompts to update Smart.

Smart 2005 for Pocket PC | User Manual

Getting started

6. Installing and Removing Maps with Smart Desktop

Smart comes with one Map Product Key that will allow you to install one map. If you require an additional map, you must ﬁrst purchase an additional Map Product Key from your Navman supplier.

Use Smart

 Desktop to activate your Map Product Key and install the required map.

Installing New Maps

a. Insert a memory card into your Pocket PC, if you will be installing more than one map or if you will

be installing one map of a large region.

b. Connect your Pocket PC to your computer (if it is not already connected) using a USB cable,

synchronisation cradle or other device that came with your Pocket PC.

• Microsoft ActiveSync will synchronize with your Pocket PC.

c. Open Smart

 Desktop, if it is not already open:

Start  Programs  Navman  Smart Desktop 2005 for Pocket PC

d. Insert a Smart Map CD into your computer CD-ROM drive, the available maps

will display (the default color for available maps is cross-hatch blue).

Note: If your computer opens Windows Explorer, close the Windows Explorer window.

e. • Australia, New Zealand and North America users: If you have already activated a

Map Product Key for your country, go to step i; otherwise continue to step f.

• European users: If you have already activated a Gold/Pan-European Map Product Key (activates all maps in Europe), go to step i; otherwise continue to step f.

f. Click the map you want to install to your iCN.

Note: You may need to install multiple maps to cover the desired geographical area.

g. If you connect to the Internet via a dial-up connection, connect to the Internet now. h. Follow the prompts to activate your Map Product Key, including:

• Enter your Map Product Key from the back of the CD box when prompted.

• You will be prompted to enter or update your contact details so Navman can advise you when updates are released.

• Your computer will connect to the Internet and activate your Map Product Key.

• If you are activating a map from a continental region that was not previously installed on your Pocket PC, follow the prompts to activate the new region. The four continental regions are Europe, USA/Canada, Australia and New Zealand.

Maps available on the Map CD in your CD-ROM drive are displayed in cross-hatch blue.

Smart 2005 for Pocket PC | User Manual

Getting started

• When activation has completed, the map will change color (the default color for activated maps is light green), proceed to step i.

i. Click the map to install to your Pocket PC.

The map will change color to indicate it has been selected (the default color for selected maps is dark green). The map is now listed in the Selected section of the Desktop Selected Maps tab.

j. • Australia, New Zealand and North America users: If you have already activated

a Map Product Key for your country, repeat step g until all required maps have been added to the Selected section of the Desktop Selected Maps tab.

• European Gold/Pan-European Map Product Key users: If you have already activated a Gold/Pan-European Map Product Key (activates all maps in Europe), repeat step g until all required maps have been added to the Selected section of the Desktop Selected Maps tab.

• European Silver/Single Map Product Key users: If you have another Silver/Single Map Product Key to activate (activates a single map), go to step f.

k. Click an Add to button to install all maps listed in the Selected section of the Desktop Selected

Maps tab to your Pocket PC, memory card, or memory card reader (not supplied). Smart Desktop will install the selected map or maps to your Pocket PC or memory card. When they have been installed, the map or maps will change color (the default color for installed maps is yellow).

l. To use your iCN, disconnect the USB cable from your iCN.

WARNING: Do not disconnect the USB cable from the iCN USB Socket

until the Map Display screen has refreshed, and the installed map or maps have changed color (the default color for installed maps is yellow).

The activated map is displayed in light green.

The selected map is displayed in dark green.

Smart 2005 for Pocket PC | User Manual

Getting started

Removing Old Maps

Before you can install a Smart 2005 map, you must ﬁrst remove the old version of the map, as you cannot use an old map and a Smart

 2005 map of the same area.

Complete the following for each map that you are upgrading:

a. Connect your Pocket PC to your computer (if it is not already connected) using a USB cable, synchronisation cradle or other device that came with your Pocket PC.

• Microsoft ActiveSync will syncronise with your Pocket PC.

b. Open Smart

 Desktop, if it is not already open:

Start

 Programs  Navman  Smart Desktop.

c. Open the Maps on Pocket PC section: Pocket PC tab  Maps on Pocket PC.

d. Click the map to be removed and select Remove from Pocket PC from the pop-up menu. The map will be removed from your Pocket PC.

Smart 2005 for Pocket PC | User Manual

Getting started

7. Starting Smart

By now, you have installed Smart on your Pocket PC and, if required, mounted your GPS receiver in your vehicle. You are now ready to start Smart

 and ensure that your Pocket PC and GPS receiver are

communicating successfully.

1. Refer to your GPS receiver manual about how to establish a valid GPS communications link between your Pocket PC and GPS receiver.

2. Close all open programs on your Pocket PC to provide memory resources for Smart

.

Note: Tapping or in the top right corner of an application does not usually close the

application, but leaves it running in the background. To close all applications, see your Pocket PC manual.

3. Tap Start (a) to display the Start menu (see Figure 1).

4. Tap Programs (b) on the Start menu.

5. Tap

Smart will open.

PiN 570: The Language Selection screen will display on PiN 570s not purchased in Australia,

Canada, New Zealand, United Kingdom or United States.

• Tap the language name or associated ﬂag icon, then tap

6. The Legal Notice screen will display. Read the legal notice and tap I Agree to conﬁrm you understand.

7. The Tutorial will display. Tap

to move through the screens.

The 2D Map screen will open.

You are now ready to obtain a GPS ﬁx.

See GPS Setup on page 18.

PiN 570: You can also open Smart by pressing the button. See the PiN 570 User Manual for details.

Figure 1. Start Menu

Figure 2. Programs Screen

Smart 2005 for Pocket PC | User Manual

Getting started

Main Menu Screen

The Main Menu screen provides access to all Smart functions, including navigating to a destination.

1. From the 2D Map screen, open the Main Menu screen by pushing the 4-way toggle

2. Tap

, to display more Main Menu options.

Smart 2005 for Pocket PC | User Manual

Getting started

8. GPS Setup

The Global Positioning System (GPS) comprises a collection of satellites orbiting Earth that transmit signals to your Pocket PC. To navigate to a destination using Smart

, you must ﬁrst obtain a GPS ﬁx.

Getting a GPS Fix

To obtain a GPS ﬁx, your Pocket PC must have a clear view of the sky.

1. From the Main Menu, tap , then GPS Status. The GPS Status screen will open

2. Tap the ﬁrst drop-down box and select the COM port for your GPS receiver from the list that appears. See your Pocket PC manual for the correct COM port.

3. Tap the second drop-down box and select the baud rate (speed) for your GPS receiver from the list that appears. See your GPS receiver manual for the correct baud rate

Tap the GPS checkbox to open the COM port. Your Pocket PC will now obtain a GPS ﬁx.

5. Tap

to return to the 2D Map screen.

Navman COM Ports and Baud Rates

This table gives COM Port numbers and Baud Rates for Navman GPS navigation products:

*The COM port for the Bluetooth GPS receiver varies between models of Pocket PC.

Device COM Port Baud Rate

Navman PiN 100 and PiN 300 COM 2 4800

Navman PiN 500 COM 8 9600

Navman Bluetooth GPS Receiver

* 57600

Smart 2005 for Pocket PC | User Manual

Getting started

Latitude and longitude of current position; tap to toggle displayed units between

degrees, minutes and decimal seconds; decimal degrees; degrees and decimal minutes.

Each segment represents a satellite

North-pointing compass and current heading in degrees

GPS ﬁx

Coordinated Universal Time (UTC) and date

Number of satellites used in GPS ﬁx

COM Port drop-down box, displays selected GPS receiver or COM port

Ground speed

Indicates whether the COM port is open

Baud rate drop-down box which displays the selected baud rate for the GPS receiver COM port

GPS Satellite Segment Key

GPS Status Screen

The GPS Status screen provides a visual representation of the information being received. Latitude and longitude are displayed, along with a north-pointing compass, ground speed and the heading in degrees. Available

satellites are shown as segments.

Colour Description

Red No signal is being received.

Yellow A valid signal is being received but not being used to ﬁx your position.

Green A valid signal is being used to ﬁx your position.

Smart 2005 for Pocket PC | User Manual

Getting started

GPS Status Messages

The GPS status messages are displayed on the 2D Map, 3D Map, Next Instruction and GPS Status screens. These messages provide feedback on the status of the GPS receiver connection.

The following table explains the meaning of these messages and includes suggested actions.

Status Message Meaning Suggested Action

GPS PORT CLOSED A GPS COM port has not

been opened.

On the GPS Status screen, tap the GPS checkbox to open the COM port selected in the ﬁrst drop-down box.

NO GPS DATA

A GPS COM Port has been opened but no GPS data are being received.

Ensure the GPS receiver is turned on and connected.

WAITING FOR GPS

A GPS COM Port has been opened, GPS data are being received, but a GPS position ﬁx has not yet been established.

Ensure the GPS receiver has an unobscured view of the sky.

If you are in a vehicle with athermic (heat reﬂecting) windows, you will require an external GPS antenna (sold separately).

GPS LOST Your GPS ﬁx has been lost. Ensure the GPS receiver has an

unobscured view of the sky.

(no GPS message; date displayed on GPS Status screen)

You have a valid GPS position ﬁx and GPS data are being received.

No action required. You can navigate to your destination.

Smart 2005 for Pocket PC | User Manual

Getting started

9. Setting your Destination

Before you travel, specify a destination and Smart will plan your route. You may select a destination using any of the Destination menu options.

Note: Depending on the destination country, some fields may be unavailable when selecting a destination.

Entering Destination Text

Use the keyboard to enter text into the appropriate boxes on the Destination screens.

Note: If the text you enter does not match any address or Point of Interest (or any name in Pocket PC Contacts), the text will turn red. In this case, check your spelling and try again.

Destination Icons

Each Destination screen displays a variable selection of icons:

Tap To...

Return to the previous screen.

Display the Route Options screen.

Add current location to Favourites.

Show the current location on the 2D Map.

Calculate route and display the 3D Map.

Conﬁrm selection.

Edit current Favourite.

Delete current Favourite.

View the Help screen for Destination icons.

Display information about the current item.

+ 47 hidden pages