PLEASE READ CAREFULLY BEFORE INSTALLING PRODUCT IN VEHICLE
This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all
safety messages that follow this symbol to avoid possible injury or death.
WARNING indicates a potentially hazardous situation which, if not avoided, could result in death or
serious injury.
CAUTION indicates a potentially hazardous situation which, if not avoided, may result in minor or
moderate injury.
CAUTION used without the safety alert symbol indicates a potentially hazardous situation which, if not
avoided, may result in property damage.
Removing original equipment, adding accessories or modifying your vehicle could affect the vehicle’s safety or make it illegal to
operate in some jurisdictions.
Follow all product instructions and all instructions in your vehicle owner’s manual regarding accessories or modifications.
Consult your country’s and/or state’s laws regarding operation of a vehicle with any accessories or modifications.
It is your sole responsibility to place, secure and use your Navman in a manner that will not cause accidents, personal injury or
property damage. Always observe safe driving practices.
Do not mount your Navman in a way that may interfere with the safe operation of the vehicle, the deployment of air bags or
other safety equipment.
Do not operate your Navman while driving.
Before you use your Navman for the first time, familiarize yourself with your device and its operation.
On main roads, the distance to an exit calculated by your Navman may be further than the distance shown on road signs. Road
signs show the distance to the start of an exit while your Navman shows the distance to the next intersection, i.e., the end of
the exit ramp or road. To prepare to exit a road, always follow distance information on road signs.
The use of information regarding safety or speed camera locations may be subject to local laws in the country of use. You are
responsible for checking that you can legally use the information in your country or in the country where the information will
be used.
Do not handle your Navman while it is hot. Let the product cool, out of direct sunlight.
At full power, prolonged listening to your Navman via headphones or earphones can damage the ear of the user.
Do not expose your Navman to direct sunlight in an unattended vehicle for prolonged periods. Overheating may damage the
unit.
To discourage theft, do not leave your Navman, mounting bracket or any cables in plain view in an unattended vehicle.
Warning Notice to Drivers in the United States
State law may prohibit drivers in states such as Arizona, California and Minnesota from mounting objects on their windshields
while driving. Please make sure you research and follow your most current State laws. An alternative mounting option may be
provided in the box with your product; or see our website for additional mounting alternatives. Navman does not take any
responsibility for any fines, penalties, or damages that may be incurred as a result of disregarding this notice.
2
Home charger-specific safety information
To charge your Navman from the mains power, use the home charger supplied by Navman as an accessory (may be sold
separately). Using other home chargers with your Navman could result in serious injury or property damage.
Never use the charger if the plug or cord is damaged.
Do not expose the charger to moisture or water. Do not use the charger in a high moisture environment. Exposure to water may
cause electrical sparks or fires.
Never touch the charger when your hands or feet are wet.
Allow adequate ventilation around the charger when using it to operate your Navman or charge the internal battery. Do not
cover the charger with paper or other objects that will reduce ventilation. Do not use the charger while it is inside a carrying
case or other container.
Ensure that the charger is connected to a power source with the correct fitting and voltage requirements. The voltage
requirements can be found on the home charger casing and/or packaging.
Do not attempt to service the charger as this could result in personal injury. Replace the charger if it is damaged or exposed to
excess moisture.
Internal battery-specific safety information
Your Navman contains a non-replaceable internal lithium-ion battery. The battery may burst or explode if mishandled,
releasing hazardous chemicals. To reduce the risk of fire or burns, do not disassemble, crush or puncture the battery.
Recycle or dispose of the battery safely and properly according to local laws and regulations. Do not dispose of the battery in
fire or water.
About the battery
Use a specified battery in the equipment.
CAUTION: The battery can burst or explode, releasing hazardous chemicals. To reduce the risk of fire or burns, do not
disassemble, crush, puncture, or dispose of in fire or water.
Important instructions (for service personnel only)
Caution: Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the
instructions.
Replace only with the same or equivalent type recommended by the manufacturer.
The battery must be recycled or disposed of properly.
Use the battery only in the specified equipment.
Only use the correct home charger (may be sold separately) or in-car charger supplied by Navman to charge your Navman
internal battery.
Only use your Navman internal battery with your Navman unit.
The Navman battery will stop charging when the ambient temperature is less than 0ºC (32ºF) or more than 45ºC (113ºF).
Failure to adhere to these warnings and cautions may lead to death, serious injury or property damage. Navman
disclaims all liability for installation or use of your Navman that causes or contributes to death, injury or property
damage or that violates any law.
3
Compliance
WARNING:This product, its packaging and its components contain chemicals known to the State of California to
cause cancer, birth defects or reproductive harm. This Notice is being provided in accordance with California’s
Proposition 65.
For regulatory identification purposes:
Navman EZY Advanced Series is assigned a model number of N271.
Navman Tourer Series is assigned a model number of N275.
Marking labels located on the exterior of your Navman indicate the regulations that your model complies with. Please
check the marking labels on your Navman and refer to the corresponding statements in this chapter. Some notices
apply to specific models only.
Products with the CE marking comply with Radio & Telecommunication Terminal Equipment Directive (R&TTE) (1999/5/EC),
the Electromagnetic Compatibility Directive (2004/108/EC) and the Low Voltage Directive (2006/95/EC) - issued by the
Commission of the European Community. Compliance with these directives implies conformity to the following European
Standards:
EN 301 489-1: Electronic compatibility and Radio spectrum Matters (ERM), Electromagnetic Compatibility (EMC) standard for
radio equipment and services; Part 1: Common technical requirements.
EN 301 489-17: Electronic compatibility and Radio spectrum Matters (ERM), Electromagnetic Compatibility (EMC) standard for
radio equipment and services; Part 17: Specific conditions for 2.4 GHz wideband transmission systems and 5 GHz high
performance RLAN equipment.
EN 55022: Radio disturbance characteristics
EN 55024: Immunity characteristics
EN 61000-3-2: Limits for harmonic current emissions
EN 61000-3-3: Limitation of voltage fluctuation and flicker in low-voltage supply system
IEC 60950-1:2005: Product Safety
The manufacturer cannot be held responsible for modifications made by the User and the consequences thereof, which may
alter the conformity of the product with the CE Marking.
Declaration of conformity
Hereby, Navman Technology declares that this N271/N275 is in compliance with the essential requirements and other relevant
provisions of Directive 1999/5/EC.
WEEE
This product must not be disposed of as normal household waste, in accordance with the EU directive for waste
electrical and electronic equipment (WEEE - 2002/96/EC). Instead, it should be disposed of by returning it to the
point of sale, or to a municipal recycling collection point.
4
Contents
Important safety information ....................................................................................................... 2
Home charger-specific safety information............................................................................ 3
Thank you for purchasing this Navman. Please read this manual carefully before using your Navman for the first
time. Keep this manual in a safe place and use as your first point of reference.
Important information for using the manual
It is important to understand the terms and typographical conventions used in this manual.
Formatting
The following formatting in the text identifies special information:
Convention Type of Information
Bold Components or items displayed on screen, including buttons, headings, field names and
ItalicsIndicates the name of a screen.
Icons
The following icons are used throughout this manual:
Icon Description
Terms
The following terms are used throughout this manual to describe user actions.
Term Description
Press Press and release a button quickly.
Tap Press and release an item displayed on the touch screen.
Select Tap an item in a list or tap a command from a menu.
Disclaimer
options.
Note
Tip
Warning
Not all models are available in all regions.
Depending on the specific model purchased, the colour and look of your device and accessories may not exactly
match the graphics shown in this document.
Navman operates a policy of ongoing development. Navman reserves the right to make changes and
improvements to any of the products described in this document without prior notice. Navman does not
warrant that this document is error-free. The screenshots and other presentations shown in this manual may
differ from the actual screens and presentations generated by the actual product. All such differences are minor
and the actual product will deliver the described functionality as presented in this User Manual in all material
respects.
6
Mounting your Navman in a vehicle
CAUTION:
Never mount your Navman where the driver’s field of vision is blocked.
If the windscreen is tinted with a reflective coating, it may be athermic and impact the GPS reception. In this
instance, please mount your Navman where there is a “clear area” - usually just beneath the rear-view mirror.
To protect your Navman against sudden surges in current, connect the in-car charger only after the car
engine has been started.
EZY Advanced Series
Tourer Series
7
Enabling Traffic (TMC) Reception
Traffic information is not available on all models and is only available in selected countries.
Depending on the model of your Navman you can receive live traffic information in one of two ways:
If your Navman has a built-in TMC receiver, you can receive live traffic information* via the in-car charger
which is used as an antenna.
If your Navman does not have a built-in TMC receiver, you will need to install the TMC accessory kit (may
be sold separately – see
Please note that you will not be able to receive the traffic information while using the third-party
accessory (such as your own car charger).
For information on using traffic information on your Navman, see the Software User Manual.
* Subscription may be required. See
www.navman.com for details).
www.navman.com for more details.
8
Getting to know your Navman
EZY Advanced Series
Tourer Series
Item Description
Power switch
Cradle slot
Speaker
Connector for in-car charger, USB cable (sold separately), home charger (may be
sold separately) and TMC accessory kit (may be sold separately)
Touch screen
Capture button
Main Menu button
9
How do I turn on my Navman?
Using the power switch
EZY Advanced Series Tourer Series
To turn on your Navman, slide the power switch to the ON position.
To turn off your Navman, slide the power switch to the OFF position, then tap Sleep.
Your Navman will enter a suspended state. When you next turn it on, your Navman will return to the last
screen that you used.
To lock the screen, slide the power switch to the OFF position, then tap Lock.
To unlock the screen, slide the power switch to the ON position.
To reset your Navman, slide the power switch to the RESET position. When your Navman has turned off,
slide the power switch to the ON position.
10
How do I charge the battery?
Your Navman has an internal battery that when fully charged, should provide power for up to 2 hours. The
battery can take up to 4 hours to fully charge.
The battery may not be fully charged when you use your Navman for the first time.
CAUTION:For optimal performance of the battery, note the following:
Do not charge the battery when the temperature is high (e.g. in direct sunlight).
There is no need to fully discharge the battery before charging.
When leaving your Navman for long periods, slide the power switch to the RESET position to save
internal battery power.
How do I charge the battery in a vehicle?
To charge your Navman in a vehicle, plug the in-car charger into on the bottom of your Navman and
the other end into the vehicle power socket.
How do I charge the battery via my computer?
For optimal charging results, ensure that your Navman is turned off while connected to your computer.
1. Turn on your computer.
2. Plug the large end of the USB cable directly into a USB port on your computer (not a USB hub) and plug
the small end into
on the bottom of your Navman.
CAUTION:When your Navman is turned on and connected to a computer, it is recognized as an external
mass-storage device. Do NOT delete any files that are pre-installed on your Navman. Deleting the files can
cause your Navman to crash
How do I charge the battery at home or work?
You can use an optional home charger to charge the battery.
To charge your Navman using a mains power socket, plug the home charger cable into
your Navman and the mains power charger into the power socket.
The home charger is not included with all models and may be purchased separately (see www.navman.com
for details).
11
on the bottom of
How do I connect my Navman to my
computer?
1. Turn on your computer.
2. Plug the large end of the USB cable directly into a USB port on your computer (not a USB hub) and plug
the small end into
on the bottom of your Navman.
3. When your Navman is turned on and connected to the computer, it is recognised as an external
mass-storage device named by the model name.
A USB Connection screen appears to prevent you from using your Navman.
DO NOT delete any files that are pre-installed on the device. Deleting the files can cause the device
to crash. Navman is not responsible for product quality caused by file deletion.
4. To transfer files, use Windows File Explorer to copy/move the files from the computer to your Navman.
12
Reference
What is GPS?
The Global Positioning System (GPS) is available at any time, free of charge, and is accurate to within 5m (15ft).
GPS navigation is made possible by a network of satellites that orbit the Earth at around 20,200km (12,552mi).
Each satellite transmits a range of signals which are utilized by GPS receivers, such as your Navman, to
determine an exact location. Although a GPS receiver can detect signals from up to 12 satellites at any time,
only four signals are required to provide a position or "GPS fix" (latitude and longitude), for vehicle navigation
systems.
How does my Navman receive GPS signals?
Your Navman receives GPS signals via the internal GPS antenna. To guarantee the optimum GPS signal strength,
ensure your Navman is outdoors, or in a vehicle outdoors, and has an unobstructed view of the sky. GPS
reception is not usually affected by weather, however, very heavy rain or snow may have a negative effect on
your reception.
Caring for your Navman
Taking good care of your Navman will ensure trouble-free operation and reduce the risk of damage to your
Navman:
Keep your Navman away from excessive moisture and extreme temperatures.
Avoid exposing your Navman to direct sunlight or strong ultraviolet light for extended periods of time.
Do not place anything on top of your Navman or drop objects on your Navman.
Do not drop your Navman or subject it to severe shock.
Do not subject your Navman to sudden and severe temperature changes. This could cause moisture
condensation inside the unit, which could damage your Navman. In the event of moisture condensation,
allow your Navman to dry out completely before use.
The screen surface can easily be scratched. Avoid touching it with sharp objects. Non-adhesive generic
screen protectors designed specifically for use on portable devices with LCD panels may be used to help
protect the screen from minor scratches.
13
Never clean your Navman when it is turned on. Use a soft, lint-free cloth to wipe the screen and the
exterior of your Navman.
Do not use paper towels to clean the screen.
Never attempt to disassemble, repair or make any modifications to your Navman. Disassembly,
modification or any attempt at repair could cause damage to your Navman and even bodily injury or
property damage and will void any warranty.
Do not store or carry flammable liquids, gases or explosive materials in the same compartment as your
Navman, its parts or accessories.
Troubleshooting
If you encounter a problem you cannot solve, contact an authorized service centre for assistance.
Problems Solutions
Your Navman does not turn on when
using battery power.
Screen responds slowly. The remaining battery power may be too low to operate your
Screen freezes. Reset your Navman.
Screen is hard to read. Increase the screen brightness.
Cannot establish a connection with a
computer.
The remaining battery power may be too low to operate your
Navman. Charge the battery using the in-car charger, home charger
(may be sold separately) or USB cable, then try again.
Navman. If the problem still persists, reset your Navman.
Ensure that your Navman and your computer are both turned on
before trying to establish a connection.
Make sure that the cable is securely plugged into the USB port on your
computer and on your Navman. Connect the USB cable directly to
your computer, not a USB hub.
Reset your Navman before connecting the USB cable. Always
disconnect your Navman before you restart your computer.
The first time you use your Navman it may take several minutes to establish a GPS connection.
How do I turn my Navman on for the first time?
To get started for the first time, complete the following steps:
1. Read the Important Safety Information
2. Position your Navman in your vehicle
Follow the instructions in the Quick Start Guide.
CAUTION: Ensure that your Navman does not obstruct the driver's view, or interfere with the
operation of the vehicle airbags and safety devices.
3. Turn your Navman on
Your Navman will turn on and display the Language screen.
4. Select your preferred language
From the Select Language screen, tap your preferred language.
You can change your preferred language while using your Navman.
5. Read the warning message
The Safety Agreement screen will display after you have selected your preferred language. Read the Safety
Agreement message. To confirm that you have read and understood the message, tap Accept.
6. View the Tutorial
To move forward through the Tutorial screen, tap Next. To view the previous screen, tap
To skip the Tutorial screen, tap Skip.
.
To prevent the Tutorial from displaying on each start-up, tap the Show tutorial on start-up option to
deselect it. To enable the tutorial again, select the option from Main Menu Æ
Æ Help Æ View
Tutorial.
7. Customise the device
Follow the onscreen instructions to select your preferred distance unit, date format, and time format.
8. Unlock your Navman
Depending on your Navman model, you may need to enter a Startup Key (which is printed on the side of
the box) and then tap OK to unlock the device. You will only have to do this the first time you use your
Navman.
It is recommended that you keep a copy of the Startup Key in a safe place.
9. Set up Home
The Home setup wizard only appears on the first time you start your Navman.
Tap OK to set up your home immediately using the address-entry wizard.
You can tap Cancel to skip the wizard, and then select you home later in MY PLACES.
When you have finished the steps above, the Main Menu screen will display. If you have a GPS fix, you can start
to use Navman to plan your trip.
4
How do I use the touch screen?
Navigating on the screen
To operate your Navman, touch the screen with your fingertip. You can perform the following actions:
Tap
Press and release an item displayed on the touch screen.
Select
Tap an item in a list or tap a command from a menu.
5
Main Menu
The Main Menu is your starting point for searching for a destination. The Main Menu also allows you to
customise your Navman, view saved locations as My Place/Home, and search for POIs nearby, and so on.
Main Menu screen options and the order of the options may differ from the above, depending on your
region, maps installed or model of Navman.
Tap to show the next page of Main Menu.
Search for places, areas and streets to help
plan your route.
Access your saved locations.
Explore the area around your current
position or destination.
Add or begin a planned trip with multiple
waypoints.
Display the calculated route in simulation
mode.
Plan your routes to avoid tight bends and
low bridges while driving a truck.
Search for information and POIs using the
Via Michelin guides.
Display the Map screen.
Configure your Navman to enhance your
navigation experience.
Search for Points of Interest nearby.
Receive live traffic information on your route
and set traffic preferences (may require optional
TMC kit or subscription, available separately).
Record GPS co-ordinates of a location, a
location with a voice recording, or a journey.
Set or navigate to your home address.
Search for information and POIs for the city
you are visiting using Travel Book.
6
How do I navigate through the menu screens?
How do I return to the Main Menu screen?
Depending on your Navman model, you can return to the Main Menu screen at any time by:
pressing the Main Menu button (
tapping the MAIN MENU button (
) on your Navman.
) in the title bar of the menu screen, which allow you to navigate
through the menu screens easily.
In some menu screens (such as the Keyboard screen), the MAIN MENU button ( ) will not appear
in the title bar. In this instance, you have to tap the BACK button (
) repeatedly.
How do I use the BACK button in the title bar?
1. From the Main Menu screen, tap the desired menu button to enter the menu screen.
For example, tapping
2. The system provides the BACK button (
will lead you to the FIND screen.
) in the title bar of the menu screen, which allow you to
navigate through the menu screens easily. You can return to the previous screen by tapping the BACK
button.
How do I use the tabs in the title bar?
In some menu screens (such as the map Overview screen), the system provides the tab buttons in the title bar
that allow you to enter the additional page in the menu screen. Simply tap the desired tab to change the view.
The selected tab will be highlighted as a darker-colour tab.
7
How do I use the Keyboard screen?
The Keyboard screen will display when you are required to enter text, such as when searching for a street name.
Search results will be listed in matching order, with the closest matches appearing on the screen. A maximum of
99 results will display.
The Keyboard screen can display with various layouts depending on the information you need to enter,
including alphabet, number, alternate characters and combinations of these.
Æ
How do I enter characters/numbers?
To select a character, tap the character.
To delete a character, tap
To enter numbers, tap
How can I set my keyboard preference?
1. From the Keyboard screen, tap
2. Select the preferred keyboard type from the list.
. Tap and hold to delete the entire text.
.
. The Keyboard preference screen will display.
8
How do I go from A-B?
WARNING: For your safety, enter destination information before you start a journey. Do not enter a
destination while driving.
How do I use the FIND wizard?
Your Navman is equipped with maps that provide street-level detail for door-to-door navigation, including
Points of Interest such as accommodation, parking areas, petrol stations, railway stations and airports. The
FIND wizard allows you to search the location easily.
1. On the Main Menu, tap
to display the FIND screen.
FIND screen options and the order of the options may differ from the above, depending on your region,
maps installed or model of Navman.
2. Complete the following:
If you want to … Then …
search for an address,
search all information on the device - city, streets,
named sites, features, landmarks or venues,
search for a city/area,
search a location by postcode,
search for a Point of Interest,
search for a location using a GPS coordinate,
search for a location from the Map screen,
search for a street intersection,
navigate to a recently visited location,
tap
tap
tap
tap
tap
tap
tap
tap
tap
.
.
.
.
.
.
.
.
.
For further instructions on searching for a POI, refer to the “How do I search for a POI?” section.
9
How do I plan my first trip?
Using your Navman to plan your first trip is easy. There are several ways to select your destination. Complete
the following to navigate to a street address that you know using the FIND address wizard.
ÆÆ
ÆÆ
Æ
When it is the first time you use FIND wizard, the Select Country screen will appear before the FIND screen.
Select your country and then you can start searching location.
If needed, you can change the country to search location. To select the other country, tap the National Flag
button (e.g.
) in the title bar of the Keyboard screen before you search the city.
Complete the following:
If you want to … Then …
calculate the route and start
navigating,
save the location as a favourite,
.
tap
The Map screen will display.
tap
.
The location will be saved in My Places immediately.
save the location as Home,
explore the map,
tap
The Edit screen will display. Tap
.
tap
Æ
10
.
.
How do I preview the destination on map?
After searching an address (or a POI), you can preview the destination on map to explore the area near the
location. On the Destination screen, tap the
On the destination preview map, you can:
Tap the
View the information of your destination that is shown at the top of the Map screen.
Tap on a street/area/POI to display the related information of the location near your destination.
Tap on the map to select the other destination. The information of the selected street/area/POI near your
destination will be displayed. Tapping the check mark will bring up the Destination screen of the selected
location.
/
button to zoom in/out the map.
button to display the destination preview map as below.
Æ
How do I preview a route?
Route simulation is not available on all models.
Depending on your Navman model, you will be able to plan a route in simulation mode that allows you to:
preview a route.
plan and view a route without a GPS fix, such as when you are inside a building.
The following steps will show you how to preview a route.
1. On the Main Menu, tap
2. Select a departure point through the Leaving from screen.
If you have a GPS fix, you can simply select the Here button ( ) so that you do not need to
select a departure point. Otherwise, use the FIND address wizard, Explore map, My Places/Recent places
menu or Home to set the departure point if you want the demonstrated route to start elsewhere.
3. Select a destination point through the Going to screen.
.
11
4. When done, tap .
5. The Map screen will display the calculated route in route simulation mode. Select a route type and tap
and the route demonstration will start automatically.
The simulated route will be displayed as orange colour.
Truck Mode
Truck mode is not available on all models and is only available in selected countries.
This feature is specifically designed for trucks. The truck mode enables, with the input of your truck details, to
calculate safer and more efficient routes to avoid the length/width/height/weight restricted tunnels and bridges,
as well as sharp turns and narrow country lanes.
WARNING: Do not rely solely on this product and its features. Using this product does not change the
requirement for a driver to take full responsibility for his behaviour. This responsibility includes observing
all traffic rules and regulations in order to avoid accidents, personal injury or property damage.
How can I plan my route using Truck mode?
1. On the Main Menu, tap
. The TRUCK MODE screen will display.
,
2. Tap Truck Mode and then select On.
3. Complete the following:
If you want to … Then …
set the details for your truck, enter the following data of the truck:
total truck weight
maximum axle weight
total truck length
maximum truck width
maximum truck height
12
If you want to … Then …
You must complete the details of the truck settings before
you can use Truck mode to plan your route.
limit the route planning while
tap Has Hazmat to turn it on or off.
shipping hazardous materials in the
truck,
How do I activate Truck mode after the free trial?
Your Navman comes with pre-activated Truck mode service for one-month free trial. You will be prompted to
purchase (from Navman e-shop online) and re-activate the service when the trial period has expired.
A product key will be sent to you via email when you have subscribed. You will need to use this product key to
activate your subscription.
1. Connect your Navman to the computer.
2. Launch NavDesk and then click Activation from the NavDesk Menu.
3. Enter your product key.
4. Follow the prompts to activate your subscription.
Walking mode
Walking mode allows you to navigate to your destination using roads and paths appropriate for a pedestrian,
including non-vehicle segments.
When in Walking mode, you will not be routed onto motorways and their associated on/off ramps (slip
roads). If your destination is more than 10 kilometres (6.3 miles) away, a warning message is displayed
indicating that the route is a long way to walk.
How can I set my navigation mode to Walking?
1. On the Main Menu, tap
.
2. Tap Route options.
3. Tap Mode, and then select Walking. Your route will be displayed using the walking icon:
.
13
Loading...
+ 61 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.