PLEASE READ CAREFULLY BEFORE INSTALLING PRODUCT IN VEHICLE
This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all
safety messages that follow this symbol to avoid possible injury or death.
WARNING indicates a potentially hazardous situation which, if not avoided, could result in death or
serious injury.
CAUTION indicates a potentially hazardous situation which, if not avoided, may result in minor or
moderate injury.
CAUTION used without the safety alert symbol indicates a potentially hazardous situation which, if not
avoided, may result in property damage.
Removing original equipment, adding accessories or modifying your vehicle could affect the vehicle’s safety or make it illegal to
operate in some jurisdictions.
Follow all product instructions and all instructions in your vehicle owner’s manual regarding accessories or modifications.
Consult your country’s and/or state’s laws regarding operation of a vehicle with any accessories or modifications.
It is your sole responsibility to place, secure and use your Navman in a manner that will not cause accidents, personal injury or
property damage. Always observe safe driving practices.
Do not mount your Navman in a way that may interfere with the safe operation of the vehicle, the deployment of air bags or
other safety equipment.
Do not operate your Navman while driving.
Before you use your Navman for the first time, familiarise yourself with your device and its operation.
On main roads, the distance to an exit calculated by your Navman may be further than the distance shown on road signs. Road
signs show the distance to the start of an exit while your Navman shows the distance to the next intersection, i.e., the end of
the exit ramp or road. To prepare to exit a road, always follow distance information on road signs.
The use of information regarding safety or speed camera locations may be subject to local laws in the country of use. You are
responsible for checking that you can legally use the information in your country or in the country where the information will
be used.
Do not handle your Navman while it is hot. Let the product cool, out of direct sunlight.
At full power, prolonged listening to your Navman via headphones or earphones can damage the ear of the user.
Do not expose your Navman to direct sunlight in an unattended vehicle for prolonged periods. Overheating may damage the
unit and void warranty.
To discourage theft, do not leave your Navman, mounting bracket or any cables in plain view in an unattended vehicle.
Warning Notice to Drivers in the United States
State law may prohibit drivers in states such as Arizona, California and Minnesota from mounting objects on their windshields
while driving. Please make sure you research and follow your most current State laws. An alternative mounting option may be
provided in the box with your product; or see our website for additional mounting alternatives. Navman does not take any
responsibility for any fines, penalties, or damages that may be incurred as a result of disregarding this notice.
Home charger-specific safety information
To charge your Navman from the mains power, use the home charger (sold separately) supplied by Navman as an accessory.
Using other home chargers with your Navman could result in serious injury or property damage.
Never use the charger if the plug or cord is damaged.
Do not expose the charger to moisture or water. Do not use the charger in a high moisture environment. Exposure to water may
cause electrical sparks or fires.
Never touch the charger when your hands or feet are wet.
Allow adequate ventilation around the charger when using it to operate your Navman or charge the internal battery. Do not
cover the charger with paper or other objects that will reduce ventilation. Do not use the charger while it is inside a carrying
case or other container.
Ensure that the charger is connected to a power source with the correct fitting and voltage requirements. The voltage
requirements can be found on the home charger casing and/or packaging.
Do not attempt to service the charger as this could result in personal injury. Replace the charger if it is damaged or exposed to
excess moisture.
Internal battery-specific safety information
Your Navman contains a non-replaceable internal lithium-ion battery. The battery may burst or explode if mishandled,
releasing hazardous chemicals. To reduce the risk of fire or burns, do not disassemble, crush or puncture the battery.
Recycle or dispose of the battery safely and properly according to local laws and regulations. Do not dispose of the battery in
fire or water.
About the battery
Use a specified battery in the equipment.
CAUTION: The battery can burst or explode, releasing hazardous chemicals. To reduce the risk of fire or burns, do not
disassemble, crush, puncture, or dispose of in fire or water.
Important instructions (for service personnel only)
Caution: Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the
instructions.
Replace only with the same or equivalent type recommended by the manufacturer.
The battery must be recycled or disposed of properly.
Use the battery only in the specified equipment.
Only use the correct home charger (sold separately), usb cable or in-car charger supplied by Navman to charge your Navman
internal battery.
Only use your Navman internal battery with your Navman unit.
The Navman battery will stop charging when the ambient temperature is less than 0ºC (32ºF) or more than 45ºC (113ºF).
Failure to adhere to these warnings and cautions may lead to death, serious injury or property damage. Navman
disclaims all liability for installation or use of your Navman that causes or contributes to death, injury or property
damage or that violates any law.
3
Compliance
WARNING:This product, its packaging and its components contain chemicals known to the State of California to
cause cancer, birth defects or reproductive harm. This Notice is being provided in accordance with California’s
Proposition 65.
For regulatory identification purposes:
EZY100T is assigned a model name of N393-4300.
EZY200 / MY300LMT / MY350LMT is assigned a model name of N393-5000.
Marking labels located on the exterior of your Navman indicate the regulations that your model complies with. Please
check the marking labels on your Navman and refer to the corresponding statements in this chapter. Some notices
apply to specific models only.
The user needs to switch off the Navman when exposed to areas with potentially explosive atmospheres such as petrol
stations, chemical storage depots and blasting operations.
Bluetooth (for models with Bluetooth capabilities only)
₂₀₀
EZY
Bluetooth QD ID B018983
/ MY
₃₀₀
LMT / MY
₃₅₀
LMT
WEEE
This product must not be disposed of as normal household waste, in accordance with the EU directive for waste
electrical and electronic equipment (WEEE - 2002/96/EC). Instead, it should be disposed of by returning it to the
point of sale, or to a municipal recycling collection point.
Contents
Important safety information ....................................................................................................... 2
Home charger-specific safety information............................................................................ 3
Thank you for purchasing this Navman. Please read this manual carefully before using your Navman for the first
time. Keep this manual in a safe place and use as your first point of reference.
Important information for using the manual
It is important to understand the terms and typographical conventions used in this manual.
Formatting
The following kinds of formatting in the text identify special information:
Convention Type of Information
BoldComponents or items displayed on screen, including buttons, headings, field names and
ItalicsIndicates the name of a screen.
Icons
The following icons are used throughout this manual:
Icon Description
options.
Note
Tip
Warning
Terms
The following terms are used throughout this manual to describe user actions.
Term Description
Press Press and release a button quickly.
Tap Press and release an item displayed on the touch screen.
Select Tap an item in a list or tap a command from a menu.
Disclaimer
Not all models are available in all regions.
Depending on the specific model purchased, the colour and look of your device and accessories may not exactly
match the graphics shown in this document.
Navman operates a policy of ongoing development. Navman reserves the right to make changes and
improvements to any of the products described in this document without prior notice. Navman does not warrant
that this document is error-free. The screenshots and other presentations shown in this manual may differ from the
actual screens and presentations generated by the actual product. All such differences are minor and the actual
product will deliver the described functionality as presented in this User Manual in all material respects.
6
2
Mounting your Navman in a vehicle
CAUTION:
Never mount your Navman where the driver’s field of vision is blocked.
If the windscreen is tinted with a reflective coating, it may be athermic and impact the GPS reception. In
this instance, please mount your Navman where there is a “clear area” - usually just beneath the
rear-view mirror.
To protect your Navman against sudden surges in current, connect the in-car charger only after the car
engine has been started.
Never expose your Navman to extreme heat or direct sunlight for prolonged periods. Overheating may
damage your Navman.
1
1
3
2
3 4
5
1
3
2
7
Enabling Traffic (TMC) Reception
Traffic information is not available on all models and is only available in selected countries.
Depending on the model of your Navman you can receive live traffic information via the in-car charger which is
used as an antenna. Please ensure your car charger is connected to your Navman and power source to receive
TMC live traffic information.
Please note that you will not be able to receive the traffic information while using the third-party accessory
(such as your own car charger).
For information on using traffic information on your Navman, see the
Software User Manual.
8
Getting to know your Navman
EZY Series
1
4
6
5
7
3
Item Description
Power button
n
Reset button
o
Speaker
p
Battery indicator
q
Touch screen
r
Slot for microSD memory card
s
Connector for in-car charger, USB cable, home charger* and TMC accessory kit*
t
* may be sold separately
2
9
MY Series
4
7
8
9
5
6
1
3
Item Description
Power button
n
Reset button
o
Speaker
p
Battery indicator
q
Touch screen
r
Microphone (not on all models)
s
Slot for microSD memory card
t
Connector for AV cable (for MY350LMT only)
u
Connector for in-car charger, USB cable, home charger* and TMC accessory kit*
v
* may be sold separately
2
10
How do I turn on my Navman?
Using the Power button
For the initial start-up, press and hold the Power button for 2 seconds to turn on your Navman.
2 se c
For normal operation, turn off the device by briefly pressing the Power button. Your Navman will enter a
suspended state. When you next briefly press the Power button, your Navman will return to the Main Menu.
To turn off your Navman, press and hold the Power button for 5 seconds.
5 se c
Resetting the device
Occasionally, you may need to perform a hardware reset when your Navman stops responding; or appears to be
“frozen” or “locked-up.” Insert a small rod, such as a straightened paperclip, into the Reset button of your
Navman.
11
How do I charge the battery?
Your Navman has an internal battery that when fully charged, should provide power for up to 1.5 hours. The
battery can take up to 4 hours to fully charge. The battery may not be fully charged when you use your
Navman for the first time.
The settings on your Navman can reduce the battery life, e.g. volume, brightness settings, Bluetooth use, etc.
CAUTION!
For optimal performance of the battery, note the following:
Do not charge the battery when the temperature is high (e.g. in direct sunlight).
There is no need to fully discharge the battery before charging.
When leaving your Navman for long periods, turn off your Navman to save battery power.
Fully charging the battery once per month will help the device retain GPS fix.
The battery indicator light on your Navman indicates the level of internal battery charge:
Green - battery full
Orange - battery charging
How do I charge the battery in a vehicle?
To charge your Navman in a vehicle, plug the in-car charger into on the bottom of your Navman and
the other end into the vehicle power socket.
How do I charge the battery via my computer?
For optimal charging results, ensure that your Navman is turned off while connected to your computer.
1. Turn on your computer.
2. Plug the large end of the USB cable directly into a USB port on your computer (not a USB hub) and plug
the small end into
3. Select the Charge only option from the pop-up message screen. You will be able to continue using your
Navman with the battery in charging mode via the computer.
For more information, refer to the “How do I connect my Navman to my computer?” section.
on the bottom of your Navman.
How do I charge the battery at home or work?
You can use an optional home charger to charge the battery.
To charge your Navman using a mains power socket, plug the home charger cable into
your Navman and the mains power charger into the power socket.
The home charger is not included and may be purchased separately. Visit www.navman.com.au (Australia)
or
www.navman.co.nz (New Zealand) for details.
12
on the bottom of
How do I insert a memory card?
Hold the MicroSD card by the edges and gently insert it into the slot as shown in the above diagram of your
Navman.
Do not apply pressure to the centre of the memory card.
To remove a card, gently push the top edge of the card inwards to release it, then pull it out of the slot.
13
How do I connect my Navman to my
computer?
1. Turn on your computer.
2. Plug the large end of the USB cable directly into a USB port on your computer (not a USB hub) and plug
the small end into
3. When your Navman is turned on and connected to the computer, you can select the desired connection
type from the pop-up message screen:
Charge only: You will be able to continue using your Navman with the battery in charging mode via
the computer.
Computer: Your Navman will be recognised as an external mass-storage device named by the model
name. A USB Connection screen appears to prevent you from using your Navman.
4. When you select the Computer option, you can use Windows File Explorer to copy/move the files from the
computer to your Navman.
Before disconnecting your Navman from the computer, it is recommended to safely remove the USB drive
from the system. This prevents data loss on the device.
on the left side of your Navman.
WARNING:DO NOT delete any files that are pre-installed on the device. Deleting the files can
cause the device to crash. Navman is not responsible for product quality caused by file deletion.
14
Other features
How do I make a hands-free call?
Hands-free calling is not available on all models.
If you have a compatible mobile phone with Bluetooth wireless technology, you can use your Navman as a
hands-free car kit. Before you can use this feature you must pair your mobile phone with your Navman.
Ensure that the Bluetooth wireless feature of your mobile phone is turned on before you begin pairing. Not all
phones with Bluetooth wireless technology are compatible with your Navman. For a list of compatible phones,
visit
www.navman.com.au (Australia) or www.navman.co.nz (New Zealand).
How do I search for a place using Live Local Search?
Live Local Search is not available on all models and is only available in selected countries (not available in
New Zealand).
Using Live Local Search, you can search online for places near a specific location. For information about Live
Local Search and using Bluetooth wireless, refer to the Software User Manual.
To use Live Local Search, you must pair your Navman with your mobile phone. If your Navman isn’t paired with
your mobile phone, then the Bluetooth screen will display. Not all phones with Bluetooth wireless technology
are compatible with your Navman. For a list of compatible phones, visit
www.navman.co.nz (New Zealand).
www.navman.com.au (Australia) or
How can I play external AV equipment through my Navman?
The AV IN connector is not available on all models.
Your Navman can receive AV input from external equipment, such as a DVD player. This means that you can
use your Navman as a second screen.
WARNING:Your Navman MUST NOT be used to play video when driving. Using this feature may cause an
accident. Please make sure you comply with this warning. Navman accepts NO liability whatsoever in this
regard.
Connect the video (yellow) and audio (red and white) signal ends of the supplied AV cable to the AV output
connectors on the external video device. Then connect the other end of the AV cable to the AV IN connector on
your Navman. Please ensure that your external video device's AV out feature is enabled.
For more information about playing external AV equipment via your Navman, refer to the Software Us er Manual.
15
Reference
What is GPS?
The Global Positioning System (GPS) is available at any time, free of charge, and is accurate to within 5m (15ft).
GPS navigation is made possible by a network of satellites that orbit the Earth at around 20,200km (12,552mi).
Each satellite transmits a range of signals which are utilised by GPS receivers, such as your Navman, to
determine an exact location. Although a GPS receiver can detect signals from up to 12 satellites at any time,
only four signals are required to provide a position or "GPS fix" (latitude and longitude), for vehicle navigation
systems.
How does my Navman receive GPS signals?
Your Navman receives GPS signals via the internal GPS antenna. To guarantee the optimum GPS signal strength,
ensure your Navman is outdoors, or in a vehicle outdoors, and has an unobstructed view of the sky. GPS
reception is not usually affected by weather, however, very heavy rain or snow may have a negative effect on
your reception.
To obtain a faster GPS fix, ensure car is stationary and battery is fully charged once per month.
Caring for your Navman
Taking good care of your Navman will ensure trouble-free operation and reduce the risk of damage to your
Navman:
Keep your Navman away from excessive moisture and extreme temperatures.
Avoid exposing your Navman to direct sunlight or strong ultraviolet light for extended periods of time.
Do not place anything on top of your Navman or drop objects on your Navman.
Do not drop your Navman or subject it to severe shock.
Do not subject your Navman to sudden and severe temperature changes. This could cause moisture
condensation inside the unit, which could damage your Navman. In the event of moisture condensation,
allow your Navman to dry out completely before use.
The screen surface can easily be scratched. Avoid touching it with sharp objects. Non-adhesive generic
screen protectors designed specifically for use on portable devices with LCD panels may be used to help
protect the screen from minor scratches.
16
Never clean your Navman when it is turned on. Use a soft, lint-free cloth to wipe the screen and the
exterior of your Navman.
Do not use paper towels to clean the screen.
Never attempt to disassemble, repair or make any modifications to your Navman. Disassembly,
modification or any attempt at repair could cause damage to your Navman and even bodily injury or
property damage and will void any warranty.
Do not store or carry flammable liquids, gases or explosive materials in the same compartment as your
Navman, its parts or accessories.
Troubleshooting
If you encounter a problem you cannot solve, contact an authorised service centre for assistance.
Problem Steps to Take and things to check What Next?
The unit is not turning
on/charging
I can not get a GPS Signal Make sure you are stationary and have a
My unit is always
showing that the speed
limit is 110 kph even
when it is not
Where is my product
key? I want to activate
my unit.
Try to charge the unit through a USB cable
connected to a computer. If the unit
charges then the issue is with the in car
charger. If the unit still fails to charge,
then the fault is with the unit.
clear line of site to the sky. If this fails to
resolve the issue, please reset the GPS
chip through the Settings menu of your
unit.
The units are set at a manual speed limit
defaulted at 110 kph. This can be changed
through the 'Safety' section of your
'Settings' menu.
There is no need to activate your unit in
anyway. This Activation tab within the
NavDesk software is for subscriptions,
travel books, international maps and map
upgrades only. Your unit will work straight
out of the box and there is no need to
activate it in anyway.
Contact technical support and an
RMA will be created to fix the
unit or replace the in car charger.
If the fault is still not resolved,
please visit our self help site (see
the information below), or
contact our technical support
team.
If the fault is still not resolved,
please visit our self help site (see
the information below), or
contact our technical support
team.
If the fault is still not resolved,
please visit our self help site (see
the information below), or
contact our technical support
team.
Navman Customer Support
To report a faulty product or speak to a member of our Technical Support team, contact:
Australia: 1300 NAVMAN (628626), New Zealand: 0800 GONAVM (466286);
or visit our tech support Website:
Zealand).
www.navmansupport.com.au (Australia), www.navmansupport.co.nz (New
The first time you use your Navman it may take several minutes to establish a GPS connection.
How do I turn my Navman on for the first time?
To get started for the first time, complete the following steps:
1. Read the Important Safety Information
2. Position your Navman in your vehicle
Follow the instructions in the Quick Start Guide.
CAUTION: Ensure that your Navman does not obstruct the driver's view, or interfere with the
operation of the vehicle airbags and safety devices.
3. Turn your Navman on
Your Navman will turn on and display the Language screen.
4. Select your preferred language
From the Select Language screen, tap your preferred language.
You can change your preferred language while using your Navman.
5. Read the warning message
The Safety Agreement screen will display after you have selected your preferred language. Read the Safety
Agreement message. To confirm that you have read and understood the message, tap Accept.
6. View the Tutorial
To move forward through the Tutorial screen, tap Next. To view the previous screen, tap
To skip the Tutorial screen, tap Skip.
.
To prevent the Tutorial from displaying on each start-up, tap the Show tutorial on start-up option to
deselect it. To enable the tutorial again, select the option from Main Menu Æ
Æ Help Æ View
Tutorial.
7. Customise the device
Follow the onscreen instructions to select your preferred distance unit, date format, and time format.
8. Set up Home
The Home setup wizard only appears on the first time you start your Navman.
Tap OK to set up your home immediately using the address-entry wizard.
You can tap Cancel to skip the wizard, and then select you home later in MY PLACES.
When you have finished the steps above, the Main Menu screen will display. If you have a GPS fix, you can start
to use Navman to plan your trip.
5
How do I use the touch screen?
Navigating on the screen
To operate your Navman, touch the screen with your fingertip. You can perform the following actions:
Tap
Press and release an item displayed on the touch screen.
Select
Tap an item in a list or tap a command from a menu.
6
Main Menu
The Main Menu is your starting point for searching for a destination. The Main Menu also allows you to
customise your Navman, view saved locations as My Place/Home, and search for POIs nearby, and so on.
Menu display may differ from the below, depending on your region, maps installed or model of Navman.
EZY series MY series
Tap to show the next page of Main Menu.
Search for places, areas and streets to help
plan your route.
Access your saved locations.
Receive live traffic information on your route
and set traffic preferences*.
* may require optional TMC kit or
subscription, available separately
Control your Navman by voice, allowing you
to search address/place/POI easily.
Record GPS co-ordinates of a location or a
journey.
Search online for live POI information (using
TrueLocal.com.au) and latest weather
information.
Search for information and POIs for the city
you are visiting using Travel Book.
Get help with just a phone call once you
breakdown on the road.
Use your Navman as a hands-free car kit.
Search for the nearest petrol stations.
Search for the nearest restaurants, cafes,
fast-food premises and other dining
establishments.
Display the Map screen.
Explore the area around your current position
or destination.
Configure your Navman to enhance your
navigation experience.
Add or begin a planned trip with multiple
waypoints.
Display the calculated route in simulation
mode.
Select your navigation mode*: Car, Large
Vehicle, Professional Truck, or Pedestrian.
* for selected models
Search online for live POI information using
Google™ Local Search.
Switch to AV mode to receive the video signal
from the external AV device.
Set or navigate to your home address.
Search for the nearest hotels/motels.
Search for the nearest emergency services,
including hospitals and police.
Search for the nearest parking places.
Search for Points of Interest nearby.
Search for the nearest banks and ATMs.
7
How do I navigate through the menu screens?
How do I use the BACK button and MAIN MENU button in the title bar?
1. On the Main Menu screen, tap the desired menu button to enter the menu screen.
For example, tapping
2. The system provides the BACK button (
menu screen, which allow you to navigate through the menu screens easily.
You can:
Return to the previous screen by tapping the BACK button.
Return to the Main Menu by tapping the MAIN MENU button.
In some menu screens, the MAIN MENU button will not appear in the title bar. In this instance, you
may have to tap the BACK button twice.
How do I use the tabs in the title bar?
In some menu screens, such as the map Overview screen, the system provides the tab buttons in the title bar
that allow you to enter the additional page in the menu screen.
Simply tap the desired tab to change the view. The selected tab will be highlighted as a darker-colour tab.
will lead you to the FIND screen.
) and MAIN MENU button ( ) in the title bar of the
Æ
8
How do I use the Keyboard screen?
The Keyboard screen will display when you are required to enter text, such as when searching for a street name.
Search results will be listed in matching order, with the closest matches appearing on the screen. A maximum of
99 results will display.
The Keyboard screen can display with various layouts depending on the information you need to enter,
including alphabet, number, alternate characters and combinations of these.
Æ
How do I enter characters/numbers?
To select a character, tap the character.
To delete a character, tap
Tap and hold to delete the entire text.
To enter numbers, tap
How can I set my keyboard preference?
.
.
1. From the Keyboard screen, tap
. The Keyboard preference screen will display.
2. Select the preferred keyboard type from the list.
9
How do I go from A-B?
WARNING: For your safety, enter destination information before you start a journey. Do not enter a
How do I use the FIND wizard?
Your Navman is equipped with maps that provide street-level detail for door-to-door navigation, including
Points of Interest such as accommodation, parking areas, petrol stations, railway stations and airports. The
FIND wizard allows you to search the location easily.
destination while driving.
1. On the Main Menu, tap
to display the FIND screen.
FIND screen display and the order of the options may differ from the below, depending on your region,
maps installed or model of Navman.
EZY series MY series
2. Complete the following:
If you want to … Then …
search all information on the device - city, streets,
named sites, features, landmarks or venues,
search for an address,
search for a city/area,
search for a location from the Map screen,
search for a location using a GPS coordinate,
search a location by postcode,
search for a street intersection,
search for a Point of Interest,
navigate to a recently visited location,
tap
tap
tap
tap
tap
tap
tap
tap
tap
.
.
.
.
.
.
.
.
.
For further instructions on searching for a POI, refer to the “How do I search for a POI?” section.
10
How do I plan my first trip?
Menu display may differ from the below, depending on the model of Navman.
Using your Navman to plan your first trip is easy. There are several ways to select your destination. The
following steps will show you how to plan your route by searching the address.
1. On the Main Menu, tap
. Complete the following to navigate to a street address that you know using
the FIND address wizard.
ÆÆ
ÆÆ
Æ
2. On the Destination screen, complete the following:
If you want to … Then …
calculate the route and start navigating,
tap
The Map screen will display.
save the location as a favourite,
tap
The location will be saved in My Places immediately.
save the location as Home,
explore the map,
tap
tap
.
.
Æ
Æ
.
.
11
How do I preview the destination on map?
After searching an address (or a POI), you can preview the destination on map to explore the area near the
location.
1. On the Destination screen, tap the
button to display the destination preview map as below.
EZY series MY series
2. The destination Preview map screen will display.
On the Preview map screen, you can:
/
Tap the
button to zoom in/out the map.
View the information of your destination that is shown at the top of the Map screen.
Tap on a street/area/POI to display the related information of the location near your destination.
Tap the grey arrow icon (
) to display your current position on the map.
Tap on the map to select the other destination. The information of the selected street/area/POI near
your destination will be displayed. Tapping the check mark will bring up the Destination screen of the
selected location.
Æ
12
How do I preview a route?
Route simulation is not available on all models.
Depending on your Navman model, you will be able to plan a route in simulation mode that allows you to:
preview a route.
plan and view a route without a GPS fix, such as when you are inside a building.
The following steps will show you how to preview a route.
1. On the Main Menu, tap
.
2. Select a departure point through the Leaving from screen.
If you have a GPS fix, you can simply select the Here button ( ) so that you do not need to
select a departure point. Otherwise, use the FIND address wizard, Explore map, My Places/Recent places
menu or Home to set the departure point if you want the demonstrated route to start elsewhere.
3. Select a destination point through the Going to screen. When done, tap .
4. The Map screen will display the calculated route in route simulation mode. Select a route type and tap
and the route demonstration will start automatically.
The simulated route will be displayed as orange colour.
How do I change the navigation mode?
This feature is not available on all models.
Large Vehicle mode
The Large Vehicle mode is specifically designed for large vehicle that is up to 9 tones. With the input of your
vehicle or trailer details, the mode enables to calculate safer and more efficient routes to avoid the
length/width/height/weight restricted tunnels and bridges, as well as sharp turns and narrow country lanes.
WARNING: Do not rely solely on this product and its features. Using this product does not change the
requirement for a driver to take full responsibility for his behaviour. This responsibility includes observing
1. On the Main Menu, tap the Mode button.
2. Tap Large Vehicle.
all traffic rules and regulations in order to avoid accidents, personal injury or property damage.
,
13
Loading...
+ 80 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.