NAD CI 8-150 DSP NAD-CI-8-150-DSP-Data-Sheet.pdf

Page 1
CI 8-150 DSP
The CI 8-150 DSP is NAD’s flagship distribu
tion amplifier and designed to deliver the most sonically refined power available today with the stability and durability necessary to reside in a rack space. The HybridDigital nCore amplifier produces 8 x 150 watts per channel @ 8 Ohms and bridgeable to 4 X 280 watts @ 8 Ohms. Designed to fit in a 2U rack space, the CI 8-150 DSP delivers audiophile level performance capable of offering highly detailed sound to the most demanding reference loudspeakers. In addition to a dual bus system and analog inputs, the CI 8-150 DSP offers a pair of optical and digital inputs.
The CI 8-150 DSP is a network controlled amplifier which allows the installer to configure and calibrate via a web based user interface. The User Interface offers access to a multi channel digital signal processing (DSP) providing detailed equalisation control. In addition, the UI offers insight into temperature and power status, as well as basic troubleshooting functions like power cycling, factory resetting and updating.
The CI 8-150 DSP delivers high resolution amplification, designed for today’s rack mount applications.
FEATURES & DETAILS
u
Platform accessed through IP control
u
Custom web UI manages DSP calibration, IP control and more
u
8 Channels x 150 Watts @ 8 Ohms
u
Bridgeable to 4 channels x 280 Watts @ 8 Ohms
u
HybridDigital nCore amplifier delivers unmatched sonic performance
u
Effectively handles long cable runs and difficult speaker loads
u
Dual global Inputs/Outputs
u
2 x Optical and 2 x Coax Inputs
u
2U Rack height
u
0.5W Standby Mode, 3W Network Standby
u
12V Trigger In; IR In/Out
u
Auto Sense Turn-on
u
Universal AC Power Supply
Page 2
CI 8-150 DSP Rear Panel
q
Specifications CI 8-150
q
GENERAL
Continuous output power into 8 ohms
Continuous output power into 4 ohms
Continuous output power into 8 ohms at Bridged mode THD (20 Hz – 20 kHz) Signal-to-Noise Ratio Clipping power (All channels driven)
Clipping power into 8 ohms at Bridged mode
IHF Dynamic Power 8 Ohms (all channels driven) 4 Ohms IHF Dynamic Power 8 Ohms (two channels driven) 4 Ohms IHF Dynamic Power (Bridged 8 Ohms mode, All channels driven) 4 Ohms IHF Dynamic Power (Bridged 8 Ohms mode, two channels driven) 4 Ohms Peak output current Damping Factor Frequency Response Channel separation
Maximum undistorted input level
Input sensitivity (for 150 W in 8 ohms, maximum
volume)
Analog Input audio sense threshold (one channel
with signal)
Trigger IN level
Standby power
DIMENSION AND WEIGHT
Gross dimensions (W x H x D)*
Shipping weight
>150 W (ref. 20 Hz-20 kHz at rated THD - all channels driven) >180 W (ref. 20 Hz-20 kHz at rated THD - two channels driven) >180 W (ref. 20 Hz-20 kHz at rated THD - all channels driven) >300W (ref. 20 Hz-20 kHz at rated THD - two channels driven) >280 W (ref. 20 Hz-20 kHz 0.02% THD - all channels driven) >500 W (ref. 20 Hz-20 kHz 0.02% THD - two channels driven) <0.02 % (1 W to 120 W, 8 ohms and 4 ohms) >90 dB (A-weighted, 500 mV input, ref. 1 W out in 8 ohms) >160 W (1 kHz 8 ohms 0.1 % THD) >200 W (1 kHz 4 ohms 0.1 % THD) >300 W (1 kHz 0.1 % THD - all channels driven) >550 W (1 kHz 0.1 % THD - two channels driven) 180 W 280 W 200 W 360 W 520 W 670 W 600 W 800 W >26 A (1 ohm, 1 ms) >150 (ref. 8 ohms, 20 Hz to 6.5 kHz) ±0.5 dB (20 Hz - 20 kHz) >75 dB (1 kHz) >65 dB (10 kHz) 3300 mV
1450 mV
3 ± 0.5 mVrms (ref. 100 Hz - 10 kHz)
3 - 30 Vdc
0.5 W
483 x 90 x 435 mm
19 1/16 x 3 9/16 x 17 3/16 inches
17.6 kg (38.8 lbs)
* Gross dimension includes extended rear panel terminals and excludes installed feet
NAD Electronics International reserves the right to change specifications or features without notice. NAD is a registered trademark of NAD Electronics International. All rights reserved. No part of this publication may be reproduced, stored, or transmitted in any form whatsoever without the written permission of NAD Electronics International. © 09/19 19-085 NAD Electronics International. www.NADelectronics.com
Loading...