1.Battery Low: the power goes
off in few seconds when it
starts to blink.
2.Image counter
3.Zoom
4.Date Mark
5.Memory card
:The card is locked for
6.Macro/Normal mode
7.Resolution
8.Flash
9.Self-timer
writing.
a.Open the battery &
SD/MMC card cover
2
b.Insert batteries
as shown above
c.Close the battery &
SD/MMC card cover
Digital Camera User Guide
Inserting the SD/MMC Card (not supplied)
a. Open the battery
& SD/MMC card
cover
b.Insert the card as
shown above. Push
the card all the
way in until it is
securely locked.
Attaching the Strap
a. The small loop goes
through the strap holder.
b. The big loop goes through
the small loop and pull tight
c.Close the cover.
To remove the card
Open the cover, then
push in the card to
pop it out.
EN
EN
3
Digital Camera User Guide
CAMERA SETTINGS
Record Mode
Turn on the power. Press the below
buttons to make settings before
taking pictures.
Resolution
Press the button repeatedly
to circle through the settings.
High
1600x1200
Standard
640x480
Video
320x240
AUDIO
Fine
2144x1608
Zoom
Press the button to view
a bigger size of the image.
4
ZOOM 1X
<Up>
<Left>
<Down>
<Right>
Flash
Press the button repeatedly
to circle through the settings.
OFF
AUTO
RED-EYE
ZOOM 2X
ZOOM 3X
ZOOM 4X
Digital Camera User Guide
Menu
Press the button to enter or exit the LCD menu. Press the
<Left>/<Right> buttons to select the item, and press <Down> /
<Up> to change settings.
Items
Self-timer: OFF ON
Photo Effect: OFFBLUR
NATURE
SEPIA(sepia tone)
B&W (black & white)
Exposure: Auto +1.0
+0.5 -0.5 -1.0
White Balance: AUTO
(Daylight)
SettingsSettingsItems
(cloudy)
(Fluorescent)
(Tungsten)
Auto shutdown:
OFF 1.5 min.
TV Output:
TV OFF NTSC PA L
Banding:
50Hz 60Hz
Information: ON OFF
Button Beep:
ON OFF
Date Set: 20YY/MM/DD
(year/month/day)
Time Set: HH/MM/SS
(hour/minute/second)
Date Mark: OFF ON
Restore Default Set:
NO YES
EN
EN
5
Digital Camera User Guide
Record Mode - continued
Macro/Normal mode
Push the Macro/Normal slide toward when taking close-up
pictures at a range of 25 ~ 35 cm. Push toward
from any other distance.
when taking
Playback Mode
Menu
Press the button to enter or exit the LCD menu. Press the
<Left>/<Right> buttons to select the item, and press <Down> to
change settings.
Items
Formatting the memory
card: NO YES
Settings
Rotate: YES EXIT
Select “YES” to rotate by
90º for each time. The
result can be retrieved
by using Console. (Refer
to page 16)
Items
Settings
Zoom: Press <Left>/
<Right>/<Up>/<Down> to
view another area of an
image. Press Shutter to
exit.
Delete one: NO YES
Delete all: NO YES
6
Digital Camera User Guide
TAKING PICTURES
Taking a Still Picture
1. Slide the lens cover.
2. Turn on the power, and make
sure it is in REC (
3. Position the subject in the LCD
display.
4. Press the Shutter button.
Taking a Video
Repeating step 1 and 2 above.
3. Press the
(VIDEO) icon.
4. Press the Shutter button to start
recording. To stop recording, press
the Shutter again.
) mode.
button to select
EN
EN
7
Digital Camera User Guide
Recording Sound Clips
1. Slide the lens cover.
2. Turn on the power, and make
sure it is in REC () mode.
3. Press the button to select
(AUDIO) icon.
4. Press the Shutter button to start
recording. Note: LCD screen will
turn off in few seconds for powersaving. Press control button to
resume the screen.
5. To stop recording, press the
Shutter again.
Note: Sound clips can only play on a PC,
please refer to page 13.
8
Digital Camera User Guide
PLAYING PICTURES BACK
Playing the Pictures
1. Turn on the power.
2. Set the camera to Playback()mode.
3. Press the <Left>/<Right> buttons to
review your pictures.
4. You can review up to 6 images at a time
by pressing button.
Playing the Videos
Select the picture marked with the icon
and then press the Shutter button to play.
4
EN
EN
9
Digital Camera User Guide
Playing videos on TV
1. Connect your camera to a
TV at VIDEO IN (yellow)
port via the video cable.
Note: The sound will not
play on TV.
2. Turn on the TV, and select
“Video” as TV input.
3. Press the
settings.
4. Set NTSC or PA L in the settings as
same as your TV system.
Note: It will take few seconds to test
5. Set the camera to Playback(
6. Press Shutter button to play.
button to select
if the camera matches TV
system correctly.
)mode.
1
2
3
To stop TV playback
1. Set “TV OFF” in the settings.
2. Press
10
.
4
Digital Camera User Guide
DELETING PICTURES
1. Turn on the power.
2. Set the camera to Playback mode.
3. Press the <Left>/<Right> buttons
to select the picture/video you
want to delete.
4. Press the
5. Select to delete one or select
to delete all.
6. Select YES to delete. Select NO
not to delete and to exit.
(Menu) button.
EN
EN
5
6
11
Digital Camera User Guide
INSTALLING SOFTWARE
1. Insert installer CD into the CD-ROM
drive.
2. Close the CD-ROM drive.
3. An installer wizard will automatically
launch.
If the installer wizard does not appear,
then;
4. You can click Start in the Windows
Taskbar. Then, select Run to continue.
5. Click Browse, and select RUN.exe in
your CD-ROM drive.
6. Click Open
7. Click OK
8. Follow the on-screen instructions to
complete driver installation and the
bundled software.
12
1
4
5
Digital Camera User Guide
TRANSFERING FILES
Connecting To PC
1. Connect your camera to a
computer via USB cable
2. In the Windows (98SE/Me/2000/
XP), your PC will detect the
camera after connection.
Note: For Windows 98SE users,
please install the Installer CD
first.
EN
EN
Windows XP
Windows Me/2000
13
Digital Camera User Guide
3. Click My Computer on the
desktop.
4. A removable disk drive appears.
5. Double click on the removable
disk.
6. Double click on the DCIM folder.
WARNING: Please do not copy any
files into the DCIM folder of your
camera. Otherwise it may cause
the camera unstable or crash.
7. Then, You can drag-and-drop files
to your PC.
Removing the camera
Windows XP
1. Click Safely Remove Hardware
) icon in the taskbar.
(
2. Select Safely removeUSB MassStorage Device from the menu.
14
Windows XP
Windows 98SE/Me/2000
Digital Camera User Guide
Windows 2000/Me
1. Click Unplug or Eject Hardware
( ) icon in the taskbar.
2. Select Stop USB Mass Storage Device
from the menu (Windows 2000).
Select Stop USB Disk from the menu
(Windows Me).
Windows 2000/Me
Windows 98SE
Windows 98SE
1. In My computer, Right click on the removable
disk corresponding to the camera.
2. Select Eject from the menu.
For MAC users
(Mac OS: 9.x and 10.1 above)
By connecting your camera to a MAC computer (referring to
“Connecting to PC” on Page 14), it will automatically detect Mass
Storage drive. You can easily manipulate your files the way you do
in MAC user interface.
Removing the camera from Mac
1. Select the camera icon (shown as ‘NO_NAME’or ‘untitled’
drive) on the desktop.
2. Drag and drop the drive to the Trash.
EN
(A)
EN
15
Digital Camera User Guide
Using Console (Not available for MAC)
By connecting your camera to a computer, the Console opens.
Meanwhile your camera switches to Mass Storage Mode, too. You
may choose either to transfer the camera data throught Console
program or throught Mass Storage Mode.
Minimize
Selected
Image
Personal
16
Help
Style
To Printer
Exit
Transfer
To Email
Image Count
Total Memory
PC Camera
Setting
View
Delete
Delete All
Select All
Next
Previous
Link
Digital Camera User Guide
USING AS PC CAMERA
(OS: 98SE/Me/2000/XP)
1. Connect your camera to a computer via
USB cable.
2. Slide the lens cover.
3. Press
4. Start NetMeeting application in Windows.
/ (Mode) button.
* PC camera mode does not support
Mac computers.
EN
EN
17
Digital Camera User Guide
SPECIFICATIONS
Image Sensor2.0M CMOS sensor
ResolutionFine: 2144 x 1608 (H/W enhancement);
High: 1600 x 1200 ; Standard: 640 x 480
Internal Memory16MB Flash
External MemorySD/MMC card slot
InterfaceUSB/TV out
FlashlightPhoto detector, IGBT type; Red-eye/
Auto/Off
File FormatJPEG/AVI/WAV
Video Frame Rate(PC Cam) 20 fps (320 x240)
Self-timer10-second delay
Shutter Speed1/15~1/2500 sec.
LensFixed(5G glass lens), f=8.5mm
Focus Range25cm~35cm(macro), 70cm~infinity(normal)
Aperture RatioF2.8
Digital Zoom4X
LCD Display1.5" TFT LCD
Power1.5V AAA alkaline batteries X 2
Dimensions86 x 42 x 34 mm
Weight92g (without batteries)
Mass StorageYES (OS: Win98se/Me/2000/XP; Mac
OS 9.X and 10.1 above)
PC Cam ModeYES (OS: Win98se/Me/2000/XP)
18
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.