K9N2GM/ K9N2VM
Series
MS-7508 (v1.X) Mainboard
G52-75081X1
i
Copyright Notice
The material in this document is the intellectual property of M ICRO-STAR INTERNATIONAL. We take every care in the preparation of this document, but no guarantee is given as to the correctness of its contents. Our products are under continual improvement and we reserve the right to make changes without notice.
Trademarks
All trademarks are the properties of their respective owners.
NVIDIA, the NVIDIA logo, DualNet, and nForce are registered trademarks or trademarks of NVIDIA Corporation in the United States and/or other countries.
AMD, Athlon™, Athlon™ XP, Thoroughbred™, and Duron™ are registered trademarks of AMD Corporation.
Intel® and Pentium® are registered trademarks of Intel Corporation.
PS/2 and OS®/2 are registered trademarks of International Business Machines Corporation.
Windows® 95/98/2000/NT/XP are registered trademarks of Microsoft Corporation. Netware® is a registered trademark of Novell, Inc.
Award® is a registered trademark of Phoenix Technologies Ltd. AMI® is a registered trademark of American Megatrends Inc.
Revision History
Revision |
Revision History |
Date |
V1.0 |
First release for PCB 1.X |
April 2008 |
Technical Support
If a problem arises with your system and no solution can be obtained from the user’s manual, please contact your place of purchase or local distributor. Alternatively, please try the following help resources for further guidance.
Visit the MSI website for FAQ, technical guide, BIOS updates, driver updates, and other inf ormation: ht tp://global.msi.com.tw/index.php? func=faqIndex
Contact our technical staff at: http://support.msi.com.tw/
ii
Safety Instructions
1.Always read the safety instructions carefully.
2.Keep this User’s Manual for future reference.
3.Keep this equipment away from humidity.
4.Lay this equipment on a reliable flat surface before setting it up.
5.The openings on the enclosure are for air convection hence protects the equipment from overheating. DO NOT COVER THE OPENINGS.
6.Make sure the voltage of the power source and adjust properly 110/220V before connecting the equipment to the power inlet.
7.Place the power cord such a way that people can not step on it. Do not place anything over the power cord.
8.Always Unplug the Power Cord before inserting any add-on card or module.
9.All cautions and warnings on the equipment should be noted.
10.Never pour any liquid into the opening that could damage or cause electrical shock.
11.If any of the following situations arises, get the equipment checked by a service personnel:
†The power cord or plug is damaged.
†Liquid has penetrated into the equipment.
†The equipment has been exposed to moisture.
†The equipment has not work well or you can not get it work according to User’s Manual.
†The equipment has dropped and damaged.
†The equipment has obvious sign of breakage.
12.DONOT LEAVETHIS EQUIPMENT INANENVIRONMENT UNCONDITIONED, STORAGE TEMPERATURE ABOVE 600 C (1400F), IT MAYDAMAGE THE EQUIPMENT.
CAUTION: Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the manufacturer.
iii
FCC-B Radio Frequency Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the measures listed below.
†Reorient or relocate the receiving antenna.
†Increase the separation between the equipment and receiver.
†Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
†Consult the dealer or an experienced radio/television technician for help.
Notice 1
The changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Notice 2
Shielded interface cables and A.C. power cord, if any, must be used in order to comply with the emission limits.
VOIR LANOTICE D’INSTALLATIONAVANT DE RACCORDER AU RESEAU.
Micro-Star International
MS-7508
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1)this device may not cause harmful interference, and
(2)this device must accept any interference received, including interference that may cause undesired operation.
iv
WEEE (Waste Electrical and Electronic Equipment) Statement
v
vi
vii
|
CONTENTS |
|
Copyright |
Notice .............................................................................................................. |
ii |
Trademarks ....................................................................................................................... |
ii |
|
Revision |
History .............................................................................................................. |
ii |
Technical |
Support ........................................................................................................... |
ii |
Safety Instructions ......................................................................................................... |
iii |
|
FCC-B Radio Frequency Interference Statement ........................................................ |
iv |
|
WEEE (Waste Electrical and Electronic Equipment) Statement .................................... |
v |
|
Chapter 1. Getting Started .................................................................................... |
1-1 |
|
Mainboard Specifications ................................................................................... |
1-2 |
|
Mainboard Layout ................................................................................................ |
1-4 |
|
Packing Checklist ................................................................................................. |
1-5 |
|
Chapter 2. Hardware Setup .................................................................................. |
2-1 |
|
Quick Components Guide .................................................................................... |
2-2 |
|
CPU (Central Processing Unit) ............................................................................ |
2-3 |
|
Memory................................................................................................................. |
2-6 |
|
Power Supply ...................................................................................................... |
2-8 |
|
Back Panel .......................................................................................................... |
2-10 |
|
Connectors ........................................................................................................ |
2-12 |
|
Slots |
.................................................................................................................... |
2-20 |
Chapter 3 BIOS Setup ............................................................................................. |
3-1 |
|
Entering Setup ..................................................................................................... |
3-2 |
|
The Main Menu ..................................................................................................... |
3-4 |
|
Standard CMOS Features ................................................................................... |
3-6 |
|
Advanced BIOS Features ................................................................................... |
3-9 |
|
Integrated Peripherals ....................................................................................... |
3-12 |
|
Power Management Setup ............................................................................... |
3-14 |
|
H/W Monitor ........................................................................................................ |
3-17 |
|
Cell Menu ............................................................................................................ |
3-18 |
|
Load Fail-Safe/ Optimized Defaults ................................................................. |
3-23 |
|
BIOS Setting Password ..................................................................................... |
3-24 |
|
Appendix A Realtek ALC888 Audio .................................................................... |
A-1 |
|
Installing the Realtek HD Audio Driver ................................................................ |
A-2 |
|
Software Configuration ...................................................................................... |
A-4 |
|
Hardware Setup ................................................................................................ |
A-19 |
|
Appendix B nVidia RAID ......................................................................................... |
B-1 |
|
Introduction .......................................................................................................... |
B-2 |
viii
RAID Configuraiton .............................................................................................. |
B-3 |
NVIDIA RAID Utility Installation ............................................................................. |
B-8 |
Using the NVMediaShield Software ................................................................. |
B-11 |
Appendix C Dual Core Center ............................................................................. |
C-1 |
Activating Dual Core Center ............................................................................... |
C-2 |
Main ...................................................................................................................... |
C-3 |
DOT(Dyanmic OverClocking) .............................................................................. |
C-5 |
Clock ..................................................................................................................... |
C-6 |
Voltage ................................................................................................................. |
C-7 |
FAN Speed ........................................................................................................... |
C-8 |
Temperature ......................................................................................................... |
C-9 |
User Profile ........................................................................................................ |
C-10 |
ix
Getting Started
Chapter 1
Getting Started
Thank you for choosing the K9N2GM/ K9N2VM Series (MS-7508v1.X) ATX mainboard. The K9N2GM/ K9N2VM Series mainboards are based on NVidia® GeForce 8200/ 8100 chipset for optimal system efficiency. Designed to fit the advanced AMD® Phenom/ Athlon 64/ Sempron series in Socket AM2/ AM2+, the K9N2GM/ K9N2VM Series deliver a high performance and professional desktop platform solution.
1-1
MS-7508 Mainboard
Mainboard Specifications
Processor Support
-AMD® Phenom/ Athlon 64/ Sempron series processors in AM2/AM2+ package
-Supports 4 pin CPU Fan Pin-Header with Fan Speed Control
(For the latest information about CPU, please visit http://global.msi.com.tw/index.php?func=cpuform)
Supported FSB
-AM2 CPU supports Hyper Transport 1.0
-AM2+ CPU supports Hyper Transport 3.0
Chipset
- NVidia® GeForce 8200/ 8100 chipset
Memory Support
-DDR2 800/ 667 DRAM (240pin/ 1.8V)
-4 DDR2 DIMMs (8GB Max)
(For more information on compatible components, please visit http://global.msi.com.tw/index.php?func=testreport)
LAN
- Supports 10/100/1000 Fast Ethernet by Realtek 8211BL
1394 (optional)
-Controlled by JMicron JMB381 (optional)
-Transfer rate is up to 400Mbps
Audio
-Chip integrated by Realtek® ALC888
-Flexible 8-channel audio with jack sensing
-Compliant with Azalia 1.0 spec
IDE
-1 IDE ports by GeForce 8200/ 8100
-Supports Ultra DMA 66/100/133 mode
-Supports PIO, Bus Master operation mode
SATA
-6 SATAII ports by GeForce 8200/ 8100
-Supports storage and data transfers at up to 3 Gb/s
RAID
- SATA1~6 support RAID 0/ 1/ 0+1/ 5 or JBOD mode
1-2
Getting Started
Floppy
-1 floppy port
-Supports 1 FDD with 360KB, 720KB, 1.2MB, 1.44MB and 2.88MB
Connectors
Back panel
-1 PS/2 mouse port
-1 PS/2 keyboard port
-1 HDMI port (optional)
-1 DVI-D port (optional)
-1 VGA port
-1 1394 port (optional)
-1 LAN jack
-4 USB 2.0 ports
-6 flexible audio jacks
On-Board Pinheaders
-2 USB 2.0 pinheaders
-1 1394 pinheader (optional)
-1 Front Panel Audio pinheader
-1 CD-in pinheader
-1 Serial port pinheader
-1 TPM Module pinheader (optional)
-1 SPDIF-out pinheader
-1 Chassis Intrusion pinheader
TPM (optional)
- Supports TPM
Slots
-1 PCI Express x16 slots
-1 PCI Express x 1 slot
-2 PCI slots
Form Factor
- Micro-ATX (24.4cm X 24.4 cm)
Mounting
- 8 mounting holes
1-3
MS-7508 Mainboard |
|
|
|
|
|
|
|
||
Mainboard Layout |
|
|
|
|
|
|
|
||
Top : mouse |
|
|
|
|
|
|
|
|
|
Bottom: keyboard |
|
|
|
|
|
|
|
|
|
HDMI Port JLPT1 |
|
|
|
|
|
|
|
|
JCOM1 |
(optional) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
FDD 1 |
Top : VGA Port |
|
|
|
|
|
|
|
|
|
Bottom: DVI-D Port(optional) |
|
|
|
|
|
|
|
||
Top:1394 (optional) |
|
|
|
|
|
|
|
|
|
Bottom: USB ports |
|
|
|
|
|
|
|
|
|
Top: LAN Jack |
|
|
|
|
|
|
|
|
|
Bottom: USB ports |
|
PWR1 |
|
|
|
|
|
|
|
T:Line-In |
|
|
|
|
|
|
|
|
|
M:Line-Out |
|
|
NVIDIA |
|
|
|
|
|
|
B:Mic |
JMB381 |
|
|
|
|
IDE1 |
|
|
|
T:RS-Out |
(optional) |
SYSFAN1 |
GeForce |
|
|
|
|
ATX1 |
|
M:CS-Out |
|
8100/ 8200 |
|
|
|
|
|||
CPUFAN1 |
|
|
|
|
|||||
B:SS-Out |
|
|
|
DIMM1 |
DIMM2 |
DIMM3 DIMM4 |
|
|
|
|
|
|
|
|
|
JTPM1 |
|||
|
PCIE_1X1 |
|
|
|
(optional) |
||||
|
|
|
|
|
|
|
|
||
LAN |
PCIE_X16 |
|
|
|
|
SATA2 |
SATA3 |
SATA5 |
|
|
|
|
|
|
|
||||
Chip |
|
|
|
|
|
JUSB2 |
|||
|
PCI_SLOT1 |
|
|
|
|||||
|
|
|
|
|
|
|
|
||
Codec |
PCI_SLOT2 |
|
BATT |
JUSB1 |
|
|
|
||
|
|
SATA1 |
SATA4 |
SATA6 |
|||||
|
|
|
|
|
+ |
|
|||
|
|
|
|
|
|
|
|||
|
|
JSPD1 |
J1394_1(optional) |
JVBAT1 JCI1 |
|
|
|
|
|
|
JAUD1 |
CD_IN1 |
|
|
JFP1 |
JFP2 |
|
|
|
|
|
|
|
|
|
||||
|
K9N2GM/ K9N2VM Series (MS-7508 v1.X) |
|
|
|
|||||
|
|
Micro-ATX Mainboard |
|
|
|
|
|
1-4
Getting Started
Packing Checklist
MSI motherboard |
MSI Driver/Utility CD |
Back IO Shield |
|
|
Power Cable |
SATA Cable |
IDE Cable |
User’s Guide
* The pictures are for reference only and may vary from the packing contents of the product you purchased.
1-5
Hardware Setup
Chapter 2
Hardware Setup
This chapter provides you with the information about hardware setup procedures. While doing the installation, be careful in holding the components and follow the installation procedures. For some components, if you install in the wrong orientation, the components will not work properly.
Use a grounded wrist strap before handling computer components. Static elec tric ity may damage the components.
2-1
MS-7508 Mainboard
Quick Components Guide
JLPT1, p.2-13 |
CPU, |
p.2-3 |
|
PWR1, p.2-8 |
|
DDR2 DIMMs, p.2-6 |
|
SYSFAN1, p.2-14 |
|||
|
|||
|
|
JCOM1, p.2-16 |
|
|
|
FDD1, p.2-12 |
|
Back Panel |
|
|
|
I/O, p.2-10 |
|
|
|
|
|
IDE1, p.2-12 |
|
|
|
ATX1, p.2-8 |
|
CPUFAN1, |
|
|
|
p.2-14 |
|
JTPM1, p.2-17 |
|
PCI Express |
|
JUSB1/2, p.2-16 |
|
slots, p.2-20 |
|
||
|
|
||
|
|
SATA, p.2-13 |
|
PCI Slots, |
|
JFP1, p.2-18 |
|
p.2-20 |
|
||
|
|
||
|
|
JFP2, p.2-18 |
|
|
|
JCI1, p.2-15 |
|
|
|
JVBAT1, p.2-19 |
|
|
J1394_1, p.2-17 |
||
JSPD1, p.2-14 |
|
||
CD_IN1, p.2-15 |
|
||
JAUD1, p.2-15 |
|
|
|
2-2 |
|
|
Hardware Setup
CPU (Central Processing Unit)
The mainboard supports AMD® Phenom/ Athlon 64/ Sempron processors in Socket AM2/ AM2+. The Socket AM2/ AM2+ offer a easy CPU installation. W hen you are installing the CPU, make sure the CPU has a heat sink and a cooling fan attached on the top to prevent overheating. If you do not have the heat sink and cooling fan, contact your dealer to purchase and install them before turning on the computer.
For the latest information about CPU, please visit http://global.msi.com.tw/index. php?func=cpuform
Important
Overheating
Overheating will seriously damage the CPU and system. Always make sure the cooling fan can work properly to protect the CPU from overheating. Make sure that you apply an even layer of thermal paste (or thermal tape) between the CPU and the heatsink to enhance heat dissipation.
Replacing the CPU
While replacing the CPU, always turn off the ATX power supply or unplug the power supply’s power cord from the grounded outlet first to ensure the safety of CPU.
Overclocking
This mainboard is designed to support overclocking. However, please make sure your components are able to tolerate such abnormal setting, while doing overclocking. Any attempt to operate beyond product specifications is not recommended. We do not guarantee the damages or risks caused by inadequate operation or beyond product specifications.
2-3
MS-7508 Mainboard
CPU Installation Procedures for Socket AM2/ AM2+
1.Please turn off the power and unplug the power cord before installing the CPU.
2.Pull the lever sideways away from the socket. Make sure to raise the lever up to a 90-de- gree angle.
|
Open the lever |
Sliding |
|
the plate |
90 degree |
3. Look for the gold arrow on the |
Gold arrow |
CPU. The gold arrow should point |
|
as shown in the picture. The CPU |
|
c an only f it i n the c orrec t |
|
orientation. Lower the CPU down |
|
onto the socket. |
|
4.If the CPU is correctly installed, the pins should be completely embedded into the socket and can not be seen. Please note that any violation of the correct installation proc edures may cause permanent damages to your mainboard.
5.Press the CPU down firmly into the socket and close the lever. As the CPU is likely to move while the lever is being closed, always close the lever with your fingers pressing tightly on top of the CPU to make sure the CPU is properly and completely embedded into the socket.
Gold arrow
Gold arrow
Press down the CPU
Correct CPU placement
O
Incorrect CPU placement
Close the lever
2-4
Hardware Setup
Installing CPU Cooler Set
W hen you are installing the CPU, make sure the CPU has a heat sink and a cooling fan attached on the top to prevent overheating. If you do not have the heat sink and cooling fan, contact your dealer to purchase and install them before turning on the computer.
Important
1.Read the CPU status in BIOS (Chapter 3).
2.Mainboard photos shown in this section are for demonstration of the CPU/ cooler installation only. The appearance of your mainboard may vary depending on the model you purchase.
1.Position the cooling set onto the retention mechanism.
Hook one end of the clip to hook first.
2.Then press down the other end of the clip to fasten the cooling set on the top of the retention mechanism. Locate the Fix Lever and lift up it .
Fixed Lever
3. Fasten down the lever.
4.Attach the CPU Fan cable to the CPU fan connector on the mainboard.
2-5
MS-7508 Mainboard
Memory
These DIMM slots are used for installing memory modules.
For more information on compatible components, please visit http://global.msi.com. tw/index.php?func=testreport
DDR2
240-pin, 1.8V
56x2=112 pin |
64x2=128 pin |
Dual-Channel Memory Population Rules
In Dual-Channel mode, the memory modules can transmit and receive data with two data bus lines simultaneously. Enabling Dual-Channel mode can enhance the system performance. The following illustrations explain the population rules for Dual-Channel mode.
1 DIMM1
DIMM2
DIMM3
DIMM4
2 |
DIMM1 |
|
DIMM2 |
|
DIMM3 |
|
DIMM4 |
Installed
Empty
2-6
Hardware Setup
Installing Memory Modules
1.The memory module has only one notch on the center and will only fit in the right orientation.
2.Insert the memory module vertically into the DIMM slot. Then push it in until the golden finger on the memory module is deeply inserted in the DIMM slot.
Important
You can barely see the golden finger if the module is properly inserted in the DIMM slot.
3. The plastic clip at each side of the DIMM slot will automatically close.
Volt Notch
Important
-DDR2 memory modules are not interchangeable with DDR and the DDR2 standard is not backwards compatible. You should always install DDR2 memory modules in the DDR2 DIMM slots.
-In Dual-Channel mode, make sure that you install memory modules of the same type and density in different channel DIMM slots.
-To enable successful system boot-up, always insert the memory modules into the DIMM1 first.
-Due to the chipset resource deployment, the system density will only be detected up to 7+GB (not full 8GB) when each DIMM is installed with a 2GB memory module.
2-7
MS-7508 Mainboard
Power Supply
ATX 24-Pin Power Connector: ATX1
This connector allows you to connect an ATX 24-pin power supply. To connect the ATX 24-pin power supply, make sure the plug of the power supply is inserted in the proper orientation and the pins are aligned. Then push down the power supply firmly into the connector.
You may use the 20-pin ATX power supply as you like. If you’d like to use the 20-pin ATX power supply, please plug your power supply along with pin 1 & pin 13 (refer to the image at the right hand). There is also a foolproof design on pin 11, 12, 23 & 24 to avoid wrong installation.
Pin Definition
12 |
24 |
ATX1 |
|
1 |
13 |
PIN |
SIGNAL |
PIN |
SIGNAL |
1 |
+3.3V |
13 |
+3.3V |
2 |
+3.3V |
14 |
-12V |
3 |
GND |
15 |
GND |
4 |
+5V |
16 |
PS-ON# |
5 |
GND |
17 |
GND |
6 |
+5V |
18 |
GND |
7 |
GND |
19 |
GND |
8 |
PWROK |
20 |
Res |
9 |
5VSB |
21 |
+5V |
10 |
+12V |
22 |
+5V |
11 |
+12V |
23 |
+5V |
12 |
+3.3V |
24 |
GND |
ATX 4-pin Power Connector: PWR1
This power connector is used to provide power to the CPU.
Pin Definition
4 |
2 |
PIN |
SIGNAL |
|
1 |
GND |
|||
3 |
1 |
|||
2 |
GND |
|||
PWR1 |
|
|||
|
3 |
12V |
||
|
|
4 |
12V |
pin 13
pin 12
Important
1.Maker sure that all the connectors are connected to proper ATX power supplies to ensure stable operation of the mainboard.
2.Power supply of 350 watts (and above) is highly recommended for system stability.
2-8
Hardware Setup
Important Notification about Power Issue
NForce chipset is very sensitive to ESD (Electrostatic Discharge), therefore this issue mostly happens while the users intensively swap memory modules under S5 (power-off) states, and the power code is plugged while installing modules. Due to several pins are very sensitive to ESD, so this kind of memory-replacement actions might cause system chipset unable to boot. Please follow the following solution to avoid this situation.
Unplug the AC power cable or unplug the power connectors before the 1st installation or during system upgrade procedure.
Unplug the AC power cable
Unplug the power connector |
Unplug the power connector |
Important
Mainboard photos shown in this section are for demonstration only. The appearance of your mainboard may vary depending on the model you purchase.
2-9
MS-7508 Mainboard
Back Panel
Mouse |
VGAPort |
(optional) |
LAN |
|
1394 Port |
|
|
||
|
|
|
|
|
|
|
|
Line-In |
RS-Out |
|
(optional) |
|
Line-Out CS-Out |
|
|
HDMI Port |
|
||
|
|
|
|
Keyboard |
DVI-D Port |
USB Port USB Port |
Mic SS-Out |
|
(optional) |
|
|
Mouse/Keyboard
The standard PS/2® mouse/keyboard DIN connector is for a PS/2® mouse/keyboard.
VGA Port
The DB15-pin female connector is provided for monitor.
HDMI Port (optional)
The High-Definition Multimedia Interface (HDMI) is an all-digital audio/video interface capable of transmitting uncompressed streams. HDMI supports all TV format, including standard, enhanced, or high-definition video, plus multi-channel digital audio on a single cable.
Important
To use the HDMI-out function, please make sure that the HDMI port has be connected before you power-on the system.
DVI-D Port (optional)
The DVI-D (Digital Visual Interface-Digital) connector allows you to connect a LCD monitor. It provides a high-speed digital interconnection between the computer and its display device. To connect an LCD monitor, simply plug your monitor cable into the DVI-D connector, and make sure that the other end of the cable is properly connected to your monitor (refer to your monitor manual for more information.)
1394 Port (optional)
The IEEE1394 port on the back panel provides connection to IEEE1394 devices.
2-10
Hardware Setup
USB Port
The USB (Universal Serial Bus) port is for attaching USB devices such as keyboard, mouse, or other USB-compatible devices.
LAN
The standard RJ-45 LAN jack is for connection to the Local Area Network (LAN). You can connect a network cable to it.
ActivityIndicator |
LinkIndicator |
LED |
Color |
LED State |
condition |
|
|
Off |
LAN link is not established. |
Left |
Orange |
On (steady state) |
LAN link is established. |
|
|
On (brighter & pulsing) The computeris communicating with another computer on the LAN. |
|
|
Green |
Off |
10 Mbit/sec data rate is selected. |
Right |
|
On |
100 Mbit/sec data rate is selected. |
|
Orange |
On |
1000 Mbit/sec data rate is selected. |
Audio Ports
These audio connectors are used for audio devices. It is easy to differentiate between audio effects according to the color of audio jacks.
Line-In (Blue) - Line In is used for external CD player, tape-player or other audio devices.
Line-Out (Green) - Line Out, is a connector for speakers or headphones.
Mic (Pink) - Mic, is a connector for microphones.
RS-Out (Black) - Rear-Surround Out in 4/ 5.1/ 7.1 channel mode.
CS-Out (Orange) - Center/ Subwoofer Out in 5.1/ 7.1 channel mode. SS-Out (Gray) - Side-Surround Out 7.1 channel mode.
2-11
MS-7508 Mainboard
Connectors
Floppy Disk Drive Connector: FDD1
This connector supports 360KB, 720KB, 1.2MB, 1.44MB or 2.88MB floppy disk drive.
FDD1
IDE Connector: IDE1
This connector supports IDE hard disk drives, optical disk drives and other IDE devices.
IDE1
Important
If you install two IDE devices on the same cable, you must configure the drives separately to master / slave mode by setting jumpers. Refer to IDE device’s documentation supplied by the vendors for jumper setting instructions.
2-12
Hardware Setup
Serial ATA Connector: SATA1~6
This connector is a high-speed Serial ATA interface port. Each connector can connect to one Serial ATA device.
SATA2 SATA3 SATA5
SATA1 SATA4 SATA6
Important
Please do not fold the Serial ATA cable into 90-degree angle. Otherwise, data loss may occur during transmission.
Parallel Port Header: JLPT1
This connector is used to connect an optional parallel port bracket. The parallel port is a standard printer port that supports Enhanced Parallel Port (EPP) and Extended Capabilities Parallel Port (ECP) mode.
26 |
25 |
JLPT1
|
|
|
2 |
1 |
|
|
|
PIN |
SIGNAL |
PIN |
SIGNAL |
PIN |
SIGNAL |
PIN |
SIGNAL |
1 |
RSTB# |
2 |
AFD# |
15 |
PRND6 |
16 |
GND |
3 |
PRND0 |
4 |
ERR# |
17 |
PRND7 |
18 |
GND |
5 |
PRND1 |
6 |
PINIT# |
19 |
ACK# |
20 |
GND |
7 |
PRND2 |
8 |
LPT_SLIN# |
21 |
BUSY |
22 |
GND |
9 |
PRND3 |
10 |
GND |
23 |
PE |
24 |
GND |
11 |
PRND4 |
12 |
GND |
25 |
SLCT |
26 |
Key (No Pin) |
13 |
PRND5 |
14 |
GND |
|
|
|
|
2-13
MS-7508 Mainboard
Fan Power Connectors: CPUFAN1, SYSFAN1
The fan power connectors support system cooling fan with +12V. When connecting the wire to the connectors, always note that the red wire is the positive and should be connected to the +12V; the black wire is Ground and should be connected to GND. If the mainboard has a System Hardware Monitor chipset on-board, you must use a specially designed fan with speed sensor to take advantage of the CPU fan control.
GND +12V SENSOR CONTROL |
NC +12V GND |
CPUFAN1 SYSFAN1
Important
1.Please refer to the recommended CPU fans at processor’s official website or consult the vendors for proper CPU cooling fan.
2.CPUFAN1 supports fan control. You can install Dual Core Center utility that will automatically control the CPU fan speed according to the actual CPU temperature.
3.Fan/heatsink with 3 or 4 pins are both available for CPUFAN1.
S/PDIF-Out Connector: JSPD1
This connector is used to connect S/PDIF (Sony & Philips Digital Interconnect Format) interface for digital audio transmission.
SPDIF-out
VCCGND
JSPD1
2-14
Hardware Setup
Front Panel Audio Connector: JAUD1
This connector allows you to connect the front panel audio and is compliant with Intel® Front Panel I/O Connectivity Design Guide.
|
|
2 |
10 |
|
|
1 |
9 |
|
|
JAUD1 |
|
|
|
HD Audio Pin Definition |
|
PIN |
SIGNAL |
DESCRIPTION |
|
1 |
MIC_L |
Microphone - Left channel |
|
2 |
GND |
Ground |
|
3 |
MIC_R |
Microphone - Right channel |
|
4 |
NC |
|
|
5 |
LINE out_R |
Analog Port - Right channel |
|
6 |
MIC_JD |
Jack detection return from front panel microphone JACK1 |
|
7 |
Front_JD |
Jack detection sense line from the High Definition Audio CODEC |
|
|
|
jack detection resistor network |
|
8 |
NC |
No control |
|
9 |
LINE out_L |
Analog Port - Left channel |
|
10 |
LINEout_JD |
Jack detection return from front panel JACK2 |
Chassis Intrusion Connector: JCI1
This connector connects to the chassis intrusion switch cable. If the chassis is opened, the chassis intrusion mechanism will be activated. The system will record this status and show a warning message on the screen. To clear the warning, you must enter the BIOS utility and clear the record.
1
GND CINTRU
JCI1
CD-In Connector: CD_IN1
This connector is provided for external audio input.
GND
R |
|
|
|
|
|
|
|
L |
|
|
|
|
|
CD_IN1
2-15
MS-7508 Mainboard
Front USB Connector: JUSB1/ JUSB2
This connector, compliant with Intel® I/O Connectivity Design Guide, is ideal for connecting high-speed USB interface peripherals such as USB HDD, digital cameras,
MP3 players, printers, modems and the like.
10 9 |
|
Pin Definition |
|
||
PIN |
SIGNAL |
PIN |
SIGNAL |
||
|
|||||
|
1 |
VCC |
2 |
VCC |
|
|
3 |
USB0- |
4 |
USB1- |
|
|
5 |
USB0+ |
6 |
USB1+ |
|
2 1 |
7 |
GND |
8 |
GND |
|
JUSB1 / 2 |
9 |
Key(no pin) |
10 |
NC |
|
|
|
|
|
Important
Note that the pins of VCC and GND must be connected correctly to avoid possible damage.
Serial Port Connector: JCOM1
This connector is a 16550A high speed communication port that sends/receives 16 bytes FIFOs. You can attach a serial device.
|
|
|
Pin Definition |
|
|
|
PIN |
SIGNAL |
DESCRIPTION |
1 |
2 |
1 |
DCD |
Data Carry Detect |
|
|
2 |
SIN |
Serial In or Receive Data |
|
|
3 |
SOUT |
Serial Out or Transmit Data |
|
|
4 |
DTR |
Data Terminal Ready |
9 |
|
5 |
GND |
Ground |
JCOM1 |
6 |
DSR |
Data SetReady |
|
7 |
RTS |
Request To Send |
||
|
|
8 |
CTS |
Clear To Send |
|
|
9 |
RI |
Ring Indicate |
2-16