MSI 760GMA-P34 User Manual [en, ru, de, fr]

0 (0)

MS-7641

760GMA-P34 (FX) series

MS-7641 (v5.1) Motherboard

G52-7641XA

The material in this document is the intellectual property of MICRO-STAR INTERNATIONAL. We take every care in the preparation of this document, but no guarantee is given as to the correctness of its contents. Our products are under continual improvement and we reserve the right to make changes without notice.

Trademarks

All trademarks in this manual are properties of their respective owners.

■MSI® is registered trademark of Micro-Star Int’l Co.,Ltd.

■NVIDIA® is registered trademark of NVIDIA Corporation.

■ATI® is registered trademark of ATI Technologies, Inc.

■AMD® is registered trademarks of AMD Corporation.

■Intel® is registered trademarks of Intel Corporation.

■Windows® is registered trademarks of Microsoft Corporation.

■AMI® is registered trademark of American Megatrends, Inc.

■Award® is a registered trademark of Phoenix Technologies Ltd.

■Sound Blaster® is registered trademark of Creative Technology Ltd.

■Realtek® is registered trademark of Realtek Semiconductor Corporation.

■JMicron® is registered trademark of JMicron Technology Corporation.

■Netware® is a registered trademark of Novell, Inc.

■Lucid® is trademarks of LucidLogix Technologies, Ltd.

■VIA® is registered trademark of VIA Technologies, Inc.

■ASMedia® is registered trademark of ASMedia Technology Inc.

■iPad, iPhone, and iPod are trademarks of Apple Inc.

Revision History

Revision	Revision History	Date
V5.1	First release for PCB 5.X	2013/ 05
V5.1	First release for PCB 5.X	2013/ 05

MS-7641

Safety Instructions

■Always read the safety instructions carefully.

■Keep this User Manual for future reference.

■Keep this equipment away from humidity.

■Lay this equipment on a reliable flat surface before setting it up.

■The openings on the enclosure are for air convection hence protects the equipment from overheating. Do not cover the openings.

■Make sure the voltage of the power source is at 110/220V before connecting.

■Place the power cord such a way that people can not step on it. Do not place anything over the power cord.

■Always Unplug the Power Cord before inserting any add-on card or module.

■All cautions and warnings on the equipment should be noted.

■Never pour any liquid into the opening that can cause damage or cause electrical shock.

■If any of the following situations arises, get the equipment checked by service personnel:

○The power cord or plug is damaged.

○Liquid has penetrated into the equipment.

○The equipment has been exposed to moisture.

○The equipment does not work well or you can not get it work according to User Manual.

○The equipment has been dropped and damaged.

○The equipment has obvious sign of breakage.

■DO NOT LEAVE THIS EQUIPMENT IN AN ENVIRONMENT UNCONDITIONED, STORAGE TEMPERATURE ABOVE 60°C (140°F), IT MAY DAMAGE THE EQUIPMENT.

Technical Support

If a problem arises with your system and no solution can be obtained from the user’s manual, please contact your place of purchase or local distributor. Alternatively, please try the following help resources for further guidance.

Visit the MSI website for technical guide, BIOS updates, driver updates, and other information: http://www.msi.com/service/download/

Contact our technical staff at:

http://support.msi.com

FCC -B Radio Frequency Interference Statement

This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. However, there is no guarantee that interference will occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the measures listed below.

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

Consult the dealer or an experienced radio/ television technician for help.

Notice 1

The changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Notice 2

Shielded interface cables and A.C. power cord, if any, must be used in order to comply with the emission limits.

VOIR LA NOTICE D’NSTALLATION AVANT DE RACCORDER AU RESEAU.

Micro-Star International

MS-7641

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1)this device may not cause harmful interference, and

(2)this device must accept any interference received, including interference that may cause undesired operation.

CE Conformity

Hereby, Micro-Star International CO., LTD declares that this device is in compliance with the essential safety requirements and other relevant provisions set out in the European Directive.

MS-7641

Radiation Exposure Statement

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment and its antenna should be installed and operated with minimum distance 20 cm between the radiator and your body. This equipment and its antenna must not be co-located or operating in conjunction with any other antenna or transmitter.

European Community Compliance Statement

The equipment complies with the RF Exposure Requirement 1999/519/EC, Council Recommendation of 12 July 1999 on the limitation of exposure of the general public to electromagnetic fields (0–300GHz). This wireless device complies with the R&TTE Directive.

Taiwan Wireless Statements

變更頻率、加大功率或變更原設計之特性及功能。

規定作業之無線電通信。低功率射頻電機須忍受合法通信或工業、科學及醫療用電波輻射性電機設備之干擾。

Japan VCCI Class B Statement

VCCIB

Korea Warning Statements

Battery Information

European Union:

Batteries, battery packs, and accumulators should not be disposed of as unsorted household waste. Please use the public collection system to return, recycle, or treat them in compliance with the local regulations.

Taiwan:

For better environmental protection, waste batteries should be collected separately for recycling or special disposal.

California, USA:

The button cell battery may contain perchlorate material and requires special handling when recycled or disposed of in California. For further information please visit: http://www.dtsc.ca.gov/hazardouswaste/perchlorate/

CAUTION

Danger of explosion if battery is incorrectly replaced.

Replace only with the same or equivalent type recommended by the manufacturer.

Chemical Substances Information

In compliance with chemical substances regulations, such as the EU REACH Regulation (Regulation EC No. 1907/2006 of the European Parliament and the Council), MSI provides the information of chemical substances in products at:

http://www.msi.com/html/popup/csr/evmtprtt_pcm.html

(Pb) (Hg) (Cd) (Cr6+) (PBB) (PBDE)

MS-7641

< >

(Battery)

(Cable/ Connector)

/ (Chassis/ Other)

( CD, DVD )

(Optical Disk Driver)

(Hard Disk Driver)

(PCAs)*

(I/O Device) ( Mouse, Keyboard )

(LCD Panel)

(Memory)

(Processor and Heatsink)

( CD DVD )

(Power Supply)

(Remote Control)

(Speakers)

(TV Tunner)

(Web Camera)

(Wireless Cards)

. * (PCB) IC

3.: SJ/T11363-2006

4.: SJ/T11363-2006EU RoHS

5.< >EPUP (Environmental Protection Use Period)

6.EPUP - (SJ/Z 11388-2009) EPUP ,

WEEE Statement

ENGLISH

To protect the global environment and as an environmentalist, MSI must remind you that...

Under the European Union (“EU”) Directive on Waste Electrical and Electronic Equipment, Directive 2002/96/EC, which takes effect on August 13, 2005, products of “electrical and electronic equipment”

cannot be discarded as municipal wastes anymore, and manufacturers of covered electronic equipment will be obligated to take back such products at the end of their useful life. MSI will comply with the product take back requirements at the end of life of MSI-branded products that are sold into the EU. You can return these

products to local collection points.

DEUTSCH

Hinweis von MSI zur Erhaltung und Schutz unserer Umwelt

Gemäß der Richtlinie 2002/96/EG über Elektround Elektronik-Altgeräte dürfen Elektround Elektronik-Altgeräte nicht mehr als kommunale Abfälle entsorgt werden. MSI hat europaweit verschiedene Sammelund Recyclingunternehmen beauftragt, die in die Europäische Union in Verkehr gebrachten Produkte, am Ende seines Lebenszyklus zurückzunehmen. Bitte entsorgen Sie dieses Produkt zum gegebenen Zeitpunkt ausschliesslich an einer lokalen Altgerätesammelstelle in Ihrer Nähe.

FRANÇAIS

En tant qu’écologiste et afin de protéger l’environnement, MSI tient à rappeler ceci...

Au sujet de la directive européenne (EU) relative aux déchets des équipement électriques et électroniques, directive 2002/96/EC, prenant effet le 13 août 2005, que les produits électriques et électroniques ne peuvent être déposés dans les décharges ou tout simplement mis à la poubelle. Les fabricants de ces équipements seront obligés de récupérer certains produits en fin de vie. MSI prendra en compte cette exigence relative au retour des produits en fin de vie au sein de la communauté européenne. Par conséquent vous pouvez retourner localement ces matériels dans les points de collecte.

РУССКИЙ

Компания MSI предпринимает активные действия по защите окружающей среды, поэтому напоминаем вам, что....

В соответствии с директивой Европейского Союза (ЕС) по предотвращению загрязнения окружающей среды использованным электрическим и электронным оборудованием (директива WEEE 2002/96/EC), вступающей в силу 13 августа 2005 года, изделия, относящиеся к электрическому и электронному оборудованию, не могут рассматриваться как бытовой мусор, поэтому производители вышеперечисленного электронного оборудования обязаны принимать его для переработки по окончании срока службы. MSI обязуется соблюдать требования по приему продукции, проданной под маркой MSI на территории EC, в переработку по окончании срока службы. Вы можете вернуть эти изделия в специализированные пункты приема.

MS-7641

ESPAÑOL

MSI como empresa comprometida con la protección del medio ambiente, recomienda:

Bajo la directiva 2002/96/EC de la Unión Europea en materia de desechos y/ o equipos electrónicos, con fecha de rigor desde el 13 de agosto de 2005, los productos clasificados como “eléctricos y equipos electrónicos” no pueden ser depositados en los contenedores habituales de su municipio, los fabricantes de equipos electrónicos, están obligados a hacerse cargo de dichos productos al termino de su período de vida. MSI estará comprometido con los términos de recogida de sus productos vendidos en la Unión Europea al final de su periodo de vida. Usted debe depositar estos productos en el punto limpio establecido por el ayuntamiento de su localidad o entregar a una empresa autorizada para la recogida de estos residuos.

NEDERLANDS

Om het milieu te beschermen, wil MSI u eraan herinneren dat….

De richtlijn van de Europese Unie (EU) met betrekking tot Vervuiling van Electrische en Electronische producten (2002/96/EC), die op 13 Augustus 2005 in zal gaan kunnen niet meer beschouwd worden als vervuiling. Fabrikanten van dit soort producten worden verplicht om producten retour te nemen aan het eind van hun levenscyclus. MSI zal overeenkomstig de richtlijn handelen voor de producten die de merknaam MSI dragen en verkocht zijn in de EU. Deze goederen kunnen geretourneerd worden op lokale inzamelingspunten.

SRPSKI

Da bi zaštitili prirodnu sredinu, i kao preduzeće koje vodi računa o okolini i prirodnoj sredini, MSI mora da vas podesti da…

Po Direktivi Evropske unije (“EU”) o odbačenoj ekektronskoj i električnoj opremi, Direktiva 2002/96/EC, koja stupa na snagu od 13. Avgusta 2005, proizvodi koji spadaju pod “elektronsku i električnu opremu” ne mogu više biti odbačeni kao običan otpad i proizvođači ove opreme biće prinuđeni da uzmu natrag ove proizvode na kraju njihovog uobičajenog veka trajanja. MSI će poštovati zahtev o preuzimanju ovakvih proizvoda kojima je istekao vek trajanja, koji imaju MSI oznaku i koji su prodati u EU. Ove proizvode možete vratiti na lokalnim mestima za prikupljanje.

POLSKI

Aby chronić nasze środowisko naturalne oraz jako firma dbająca o ekologię, MSI przypomina, że...

ZgodniezDyrektywąUniiEuropejskiej(“UE”)dotyczącąodpadówproduktówelektrycznych i elektronicznych (Dyrektywa 2002/96/EC), która wchodzi w życie 13 sierpnia 2005, tzw. “produkty oraz wyposażenie elektryczne i elektroniczne “ nie mogą być traktowane jako śmieci komunalne, tak więc producenci tych produktów będą zobowiązani do odbierania ich w momencie gdy produkt jest wycofywany z użycia. MSI wypełni wymagania UE, przyjmując produkty (sprzedawane na terenie Unii Europejskiej) wycofywane z użycia. Produkty MSI będzie można zwracać w wyznaczonych punktach zbiorczych.

TÜRKÇE

Çevreci özelliğiyle bilinen MSI dünyada çevreyi korumak için hatırlatır:

Avrupa Birliği (AB) Kararnamesi Elektrik ve Elektronik Malzeme Atığı, 2002/96/ EC Kararnamesi altında 13 Ağustos 2005 tarihinden itibaren geçerli olmak üzere, elektrikli ve elektronik malzemeler diğer atıklar gibi çöpe atılamayacak ve bu elektonik cihazların üreticileri, cihazların kullanım süreleri bittikten sonra ürünleri geri toplamakla yükümlü olacaktır. Avrupa Birliği’ne satılan MSI markalı ürünlerin kullanım süreleri bittiğinde MSI ürünlerin geri alınması isteği ile işbirliği içerisinde olacaktır. Ürünlerinizi yerel toplama noktalarına bırakabilirsiniz.

ČESKY

Záleží nám na ochraně životního prostředí - společnost MSI upozorňuje...

Podle směrnice Evropské unie (“EU”) o likvidaci elektrických a elektronických výrobků 2002/96/EC platné od 13. srpna 2005 je zakázáno likvidovat “elektrické a elektronické výrobky” v běžném komunálním odpadu a výrobci elektronických výrobků, na které se tato směrnice vztahuje, budou povinni odebírat takové výrobky zpět po skončení jejich životnosti. Společnost MSI splní požadavky na odebírání výrobků značky MSI, prodávaných v zemích EU, po skončení jejich životnosti. Tyto výrobky můžete odevzdat v místních sběrnách.

MAGYAR

Annak érdekében, hogy környezetünket megvédjük, illetve környezetvédőként fellépve az MSI emlékezteti Önt, hogy ...

Az Európai Unió („EU”) 2005. augusztus 13-án hatályba lépő, az elektromos és elektronikus berendezések hulladékairól szóló 2002/96/EK irányelve szerint az elektromos és elektronikus berendezések többé nem kezelhetőek lakossági hulladékként, és az ilyen elektronikus berendezések gyártói kötelessé válnak az ilyen termékek visszavételére azok hasznos élettartama végén. Az MSI betartja a termékvisszavétellel kapcsolatos követelményeket az MSI márkanév alatt az EU-n belül értékesített termékek esetében, azok élettartamának végén. Az ilyen termékeket a legközelebbi gyűjtőhelyre viheti.

ITALIANO

Per proteggere l’ambiente, MSI, da sempre amica della natura, ti ricorda che…. In base alla Direttiva dell’Unione Europea (EU) sullo Smaltimento dei Materiali Elettrici ed Elettronici, Direttiva 2002/96/EC in vigore dal 13 Agosto 2005, prodotti appartenenti alla categoria dei Materiali Elettrici ed Elettronici non possono più essere eliminati come rifiuti municipali: i produttori di detti materiali saranno obbligati a ritirare ogni prodotto alla fine del suo ciclo di vita. MSI si adeguerà a tale Direttiva ritirando tutti i prodotti marchiati MSI che sono stati venduti all’interno dell’Unione Europea alla fine del loro ciclo di vita. È possibile portare i prodotti nel più vicino punto di raccolta.

MS-7641

Table of Content

English............................................................................13

Getting startED........................................................................................13

SPECIFICATIONS............................................................................................14

Screw Holes...............................................................................................16

REAR PANEL...................................................................................................17

HARDWARE SETUP........................................................................................17

BIOS Setup....................................................................................................26

.................................................................................33

...........................................................................................................33

..................................................................................................................34

..........................................................................................................36

..........................................................................................................37

...................................................................................................37

BIOS .........................................................................................................46

Français..........................................................................53

Pour commencer.....................................................................................53

SPéCIFICATIONS............................................................................................54

Trous taraudés........................................................................................56

Panneau arrière.......................................................................................57

Installation du matériel.......................................................................57

Réglage bios...............................................................................................66

DEUTSCH...........................................................................73

eINLEITUNG....................................................................................................73

SPEZIFIKATIONEN..........................................................................................74

SCHRAUBENLÖCHER....................................................................................76

Hinteres Anschlusspanel.....................................................................77

HARDWARE SETUP........................................................................................77

BIOS Setup....................................................................................................86

РУССКИЙ...........................................................................93

НАЧАЛО РАБОТЫ..........................................................................................93

ХАРАКТЕРИСТИКИ........................................................................................94

ОТВЕРСТИЯ ДЛЯ ВИНТОВ...........................................................................96

ЗАДНЯЯ ПАНЕЛЛЬ........................................................................................97

УСТАНОВКА ОБОРУДОВАНИЯ....................................................................97

НАСТРОЙКА BIOS........................................................................................106

............................................................................	113
................................................................................................................	113
................................................................................................................	114
.............................................................................................................	116
.........................................................................................................	117
.........................................................................................................	117
BIOS .......................................................................................................	126
............................................................................	133
................................................................................................................	133
................................................................................................................	134
.............................................................................................................	136
................................................................................................................	137
.........................................................................................................	137
BIOS .......................................................................................................	146
...............................................................................	153
.........................................................................................................	153
.......................................................................................	154
.............................................................................................................	156
I/O ........................................................................................................	157
............................................................................	157
BIOS ....................................................................................................	166

MS-7641

English

Getting startED

Thank you for choosing the 760GMA-P34 (FX) (MS-7641 v5.x) Micro-ATX motherboard. The 760GMA-P34 (FX) is based on AMD® 760G & SB710 chipset for optimal system efficiency. Designed to fit the advanced AMD® processor inAM3+ package, the 760GMA-P34 (FX) Series deliver a high performance and professional desktop platform solution.

Layout

Top : mouse JPWR2

Bottom:keyboard

Top: VGA Port

Bottom: DVI

JUSB_PW1

USB2.0 ports

USB3.0 ports

Top: LAN Jack

Bottom: USB2.0 ports

T:Line-In	SYSFAN1
M:LineOut	SYSFAN1
B:Mic-In

PCI_E1

CPUFAN

JCI1

	JPWR1
	SYSFAN2
DIMM1 DIMM2	JCOM1
BUZ1	JTPM1
BATT +	JBAT1

PCI_E2

JSPI1

PCI1

		JFP2
JAUD1	JUSB_PW2	JUSB1 JUSB2
JUSB3		JFP1

SATA1	SATA3	SATA5	SATA7
SATA2	SATA4	SATA6	SATA8

SPECIFICATIONS

Processor

■ AMD® FX/ Phenom™ II/ Athlon™ II/ Sempron™ processors in AM3+ package.

HyperTransport

■ HyperTransport™ 3.0, supports up to 5.2 GT/s Chipset

■North Bridge: AMD® 760G chipset

■South Bridge: AMD® SB710 chipset

Memory

■DDR3 1066/ 1333/ 1600(OC)/ 1866(OC) SDRAM (total 16GB Max)

■2 DDR3 DIMMs (240pin / 1.5V), support Dual-Channel mode

LAN

■ Supports LAN 10/100/1000 Fast Ethernet by Realtek® 8111E Audio

■Chip integrated by Realtek® ALC887

■Supports 7.1 channels audio out

■Compliant with Azalia 1.0 Spec

SATA

■2 SATA 6Gb/s ports (SATA7~8) by ASMEDIA 1061

■6 SATA 3Gb/s ports (SATA1~6) by AMD® SB710

RAID

■ Supports RAID 0/ 1/ 10 or JBOD mode Connectors

■Back Panel I/O

1 PS/2 mouse port

1 PS/2 keyboard port

1 VGA port

1 DVI-D port

4 USB 2.0 ports

2 USB 3.0 ports

1 LAN jack

3 flexible audio jacks

■Onboard Connectors

1 USB 3.0 connector

2 USB 2.0 connectors

1 Front Audio connector

1 Serial Port connecotr

1 TPM connector

1 Chassis Instrusion Connector

MS-7641

Slots

■1 PCIe 2.0 x16 slot

■1 PCIe x1 slot

■1 PCI slot, supports 3.3V/ 5V PCI bus Interface

Form Factor

■ Micro-ATX (243.8mm x 228mm)

Mounting

■ 6 mounting holes

If you need to purchase accessories and request the part numbers, you could search the product web page and find details on our web address below http://www.msi.com/index.php

For the latest information about CPU, please visit

http://www.msi.com/service/cpu-support/

For more information on compatible components, please visit

http://www.msi.com/service/test-report/

Screw Holes

When you install the motherboard, you have to place the motherboard into the chassis in the correct direction. The locations of screws holes on the motherboard are shown as below.

The side has to toward the rear, the position for the I/O shield of the chassis.

BATT +

Screw holes

Refer above picture to install standoffs in the appropriate locations on chassis and then screw through the motherboard screw holes into the standoffs.

Important

*To prevent damage to the motherboard, any contact between the motherboard circuit and chassis or unnecessary standoffs mounted on the chassis is prohibited.

*Please make sure there is no metal components placed on the motherboard or within the chassis that may cause short circuit of the motherboard.

MS-7641

REAR PANEL

The rear panel provides the following connectors:

Mouse	VGA Port			LAN
Mouse			USB 3.0
			USB 3.0	Line-In
			Ports	Line-In
			Ports
				Line-Out
				MIC
Keyboard	DVI-D Port	USB 2.0		USB 2.0
		Ports		Ports

HARDWARE SETUP

CPU & Cooler Installation for AM3+

When you are installing the CPU, make sure the CPU has a cooler attached on the top to prevent overheating. Meanwhile, do not forget to apply some thermal paste on CPU before installing the heat sink/cooler fan for better heat dispersion.

The surface of AM3+ CPU.

Remember to apply some thermal paste on it for better heat dispersion.

Gold arrow

Follow the steps below to install the CPU & cooler correctly. Wrong installation will cause the damage of your CPU & motherboard.

. Pull the lever sideways away from the socket. Make sure to raise the lever up to a 90-degree angle.

2.Look for the gold arrow of the CPU. The gold

arrow should point as shown in the picture. The CPU can only fit in the correct orientation.

3. If the CPU is correctly installed, the pins should be completely embedded into the socket and can not be seen. Please note that any violation of the correct installation procedures may cause permanent damages to your motherboard.

4. Press the CPU down firmly into the socket and close the lever. As the CPU is likely to move while the lever is being closed, always close the lever with your fingers pressing tightly on top of the CPU to make sure the CPU is properly and completely embedded into the socket.

5. Position the cooling set onto the retention mechanism. Hook one end of the clip to hook first.

6. Then press down the other end of the clip to fasten the cooling set on the top of the retention mechanism. Locate the Fix Lever and lift up it .

7. Fasten down the lever.

8.Attach the CPU Fan cable to the CPU fan connector on the motherboard.

Important

While disconnecting the Safety Hook from the fixed bolt, it is necessary to keep an eye on your fingers, because once the Safety Hook is disconnected from the fixed bolt, the fixed lever will spring back instantly.

MS-7641

Installing Memory Modules

. The memory module has only one notch on the center and will only fit in the right orientation.

2.Insert the memory module vertically into the DIMM slot. Then push it in until the golden finger on the memory module is deeply inserted in the DIMM slot. The plastic clip at each side of the DIMM slot will automatically close when the

memory module is properly seated. You can barely see the golden finger if the memory module is properly inserted in the DIMM slot.

3.Manually check if the memory module has been locked in place by the DIMM slot clips at the sides.

Notch

Volt

Important

*In Dual-Channel mode, make sure that you install memory modules of the same type and density in different channel DIMM slots.

*To enable successful system boot-up, always insert the memory modules into the DIMM1 first.

ATX 24-Pin Power Connector: JPWR1

This connector allows you to connect an ATX 24-pin power supply. To connect the ATX 24-pin power supply, make sure the plug of the power supply is inserted in the proper orientation and the pins are aligned. Then push down the power supply firmly into the connector.

						12.
						11	. +3	.
					910.			.
					8	.	+12V		3V
					7		+12V
				6 .
			5 .
			4	. +5
2		3 .
2			. +5		V
1	.				V
1				Ground
. +3.
+3			3									24.
		.GroundV										24.
		3V									23.
											. +5				V
											+5				V
											+5			Ground
											+5	V	V
												V
									.	-
							13. -			ON	#
									12V		#
							+3.Ground
									3
									V

ATX 4-Pin Power Connector: JPWR2

This 4-Pin power connector is used to provide power to the CPU.

	1
	.
2	Ground
.
Ground
		3
	4	.
	.
		+12V
	+12V

Important

Make sure that all the connectors are connected to proper ATX power supplies to ensure stable operation of the motherboard.

Serial ATA Connector: SATA1 ~ 8

This connector is a high-speed Serial ATA interface port. Each connector can connect to one Serial ATA device.

SATA 1~6 (3Gb/s, by AMD® SB710)

SATA 7~8 (6Gb/s, by ASMEDIA 1061)

Important

Please do not fold the Serial ATA cable into a 90-degree angle. Otherwise, data loss may occur during transmission.

MS-7641

Fan Power Connectors: CPUFAN, SYSFAN1, SYSFAN2

The fan power connectors support system cooling fan with +12V. When connecting the wire to the connectors, always note that the red wire is the positive and should be connected to the +12V; the black wire is Ground and should be connected to GND. If the motherboard has a System Hardware Monitor chipset onboard, you must use a specially designed fan with speed sensor to take advantage of the CPU fan control.

CPUFAN SYSFAN1 SYSFAN2

				1
		2 .
3			. G
4	.			+	o
4		S 1				u
.			e 2				n
C				n V				d
		o		s
			n
				t o
				r r
				o
				l

		1
	2 .
3 .			Ground
NCSensSpeed
4 .
.			e C
			ontrol

		1
	2 .
3	. G
3		+ r
.		1 o
S			2 u
	e				n
		n V				d
			s
			o
				r

Front Panel Connectors: JFP1, JFP2

These connectors are for electrical connection to the front panel switches and LEDs. The JFP1 is compliant with Intel® Front Panel I/O Connectivity Design Guide.

	P
P	ower		S	10.
P			S	10.
ower		LE	witch			No
		LE				8Pi
			D			6	. n
			D			6		-
			4			.
			4			+
			2	.
			2		-
			.
			+

JFP1

					9
1 -						.
1 -			7				Reserve
	5			.
	5				+
3		.
3		-
.											d
+											d
.							Reset
							Reset			S
				HDD				LE		S
								LE	D		witch

Speaker			6		+
Buzzer			6		+
				8
				.
	4		.
	4			-
2	.
2		+
.
-

JFP2

			7
	3		5 .
	3		. No
1			Power
1		.		Pi
.		Suspend				D
.					n
Ground					LE
					LE
						D

Chassis Intrusion Connector: JCI1

This connector connects to the chassis intrusion switch cable. If the chassis is opened, the chassis intrusion mechanism will be activated. The system will record this status and show a warning message on the screen. To clear the warning, you must enter the BIOS utility and clear the record.

	2
1		.
1		G
.			r
CI					u
		N		o		n
			T				d
				R
						U

Serial Port Connector: JCOM1 This connector is a 16550A high 16 bytes FIFOs. You can attach a

speed communication port that sends/receives serial device.

					1
						0
				8 .
		6			. N
		6				C			o
	4		.				T			P
	4			D				S		i
2		.			S					n
2		D				R
.			T
S				R
		I		R
		N

						9
				7			.
			5	7				R
			5			.			I
	3		. R
	3						T
1		. Gr						S
1			S			o
.			O				u
D					U			n
		C				T			d
			D

Front Panel Audio Connector: JAUD1

This connector allows you to connect the front panel audio and is compliant with Intel® Front Panel I/O Connectivity Design Guide.

8 .

TPM Module connector: JTPM1

This connector connects to a TPM (Trusted Platform Module) module. Please refer to the TPM security platform manual for more details and usages.

1 .

. Gr

. G

i o

2 .

1 .

P C

MS-7641

Front USB 2.0 Connector: JUSB1, JUSB2

This connector, compliant with Intel® I/O Connectivity Design Guide, is ideal for connecting high-speed USB interface peripherals such as USB HDD, digital cameras, MP3 players, printers, modems and the like.

						1
								0
			6		8 .
			6				G NC
				.		.			r
	4			.					r
	4				U				o
2		.				S				u
2		U						B			n
.				S					1			d
V					B					+
		C					1
			C					-

						9
			7			.
							N
		5 .						o
	3		. Gr						P
			U				o			i
1	.				S			u n
	U								n
.			S			B				d
V				B			0
	C				0			+
		C				-

USB 3.0 Expansion Connector: JUSB3

The USB 3.0 port is backwards compatible with USB 2.0 devices. It supports data transfer rates up to 5Gbits/s (SuperSpeed).

						19			20.
						19						No
						18..						No
					16.				Power
					17	.	USB3_						Pi	n
			15.			.	USB3_							n
		14				USB3						RX		_
	13.			.	USB3Ground							RX		_
12.				.							_ RX
12.				USB3		_
			Ground					_ C
		USB2.				_ TX
U		USB2.				TX			C
.	SB2.				-					_
				0	0						_
				0								DP
				+

. Power

USB3

SB3Ground

USB3

_ DN

Ground

SB2.

TX_

SB2. 0

Ground

0 -

Important

*Note that the VCC and GND pins must be connected correctly to avoid possible damage.

*To use a USB 3.0 device, you must connect the device to a USB 3.0 port through an optional USB 3.0 compliant cable.

Clear CMOS Jumper: JBAT1

There is a CMOS RAM onboard that has a power supply from an external battery to keep the data of system configuration. With the CMOS RAM, the system can automatically boot OS every time it is turned on. If you want to clear the system configuration, set the jumper to clear data.

JBAT1
1	1
Keep Data	Clear Data

Important

You can clear CMOS by shorting 1-2 pin while the system is off, then open it. Avoid clearing the CMOS while the system is on; it will damage the motherboard.

USB power Jumper: JUSB_PW1, JUSB_PW2

These jumpers are used to select USB ports powered by VCC5 or 5VSB. Set to 5VSB if you want the USB ports provide power in standby mode.

JUSB_PW1	1	1	1
(for rear USB
2.0 ports)
		Keep USB	Keep USB
		power to VCC5	power to 5VSB
JUSB_PW2
(for on-board	1	1	1
USB connec-		Keep USB	Keep USB
tors)		power to VCC5	power to 5VSB

Important

If you set the jumper to 5VSB, the power supply must be able to provide at least 2A currents.

MS-7641

PCIe Slot

The PCIe slot supports the PCIe interface expansion card.

PCIe x16 slot.

PCIe x1 slot.

PCI Slot

The PCI slot supports LAN card, SCSI card, USB card, and other add-on cards that comply with PCI specifications.

Important

When adding or removing expansion cards, make sure that you unplug the power supply first. Read the documentation for the expansion card to configure any necessary hardware or software settings for, such as jumpers, switches or BIOS configuration.

PCI Interrupt Request Routing

The IRQ, acronym of interrupt request line and pronounced I-R-Q, are hardware lines over which devices can send interrupt signals to the microprocessor. The PCI IRQ pins are typically connected to the PCI bus pins as follows:

Order	1		2		3		4
Slot	1		2		3		4
Slot
PCI 1		INT E#		INT F#		INT G#		INT H#
PCI 1		INT E#		INT F#		INT G#		INT H#

BIOS Setup

Power on the computer and the system will start POST (Power On Self Test) process. When the message below appears on the screen, press <DEL> key to enter Setup.

Press DEL to enter SETUP

If the message disappears before you respond and you still wish to enter Setup, restart the system by turning it OFF and On or pressing the RESET button. You may also restart the system by simultaneously pressing <Ctrl>, <Alt>, and <Delete> keys.

Main Page

Standard CMOS Features

Use this menu for basic system configurations, such as time, date etc.

Advanced BIOS Features

Use this menu to setup the items of special enhanced features.

Integrated Peripherals

Use this menu to specify your settings for integrated peripherals.

Power Management Setup

Use this menu to specify your settings for power management.

H/W Monitor

This entry shows the status of your CPU, fan, warning for overall system status.

Green Power

Use this menu to specify the power phase.

MS-7641

BIOS Setting Password

Use this menu to set BIOS setting Password.

Cell Menu

Use this menu to specify your settings for frequency/voltage control.

M-Flash

Use this menu to read/ flash the BIOS from USB media device.

Overclocking Profile

Use this menu to save/ load your settings to/ from CMOS for BIOS.

Load Fail-Safe Defaults

Use this menu to load the BIOS default values that are factory settings for system operations.

Load Optimized Defaults

Use this menu to load factory default settings into the BIOS for stable system performance operations.

Save & Exit Setup

Save changes to CMOS and exit setup.

Exit Without Saving

Abandon all changes and exit setup.

Cell Menu

Current CPU/ DRAM/ CPU-NB Frequency

It shows the current frequency of CPU/ DRAM/ CPU-NB. Read-only.

CPU Specifications

Press <Enter> to enter the sub-menu. This submenu shows the information of installed CPU.

CPU Technology Support

Press <Enter> to enter the sub-menu. This sub-menu shows the technologies that the installed CPU supported.

CPU Feature

Press <Enter> to enter the sub-menu:

AMD Cool’n’Quiet

The Cool’n’Quiet technology can effectively and dynamically lower CPU speed and power consumption.

MS-7641

C1E Support

To enable this item to red the CPU power consumption while idle. Not all porcessors support Enhanced Halt tate (C1E).

SVM Support

This item allows you to enable/disable the AMD SVM (Secure Virtual Machine) Technology.

AMD Cool’n’Quiet

The Cool’n’Quiet technology can effectively and dynamically lower CPU speed and power consumption.

Important

To ensure that Cool’n’Quiet function is activated and will be working properly, it is required to double confirm that:

*RunBIOSSetup,andselectCellMenu.UnderCellMenu,findAMDCool’n’Quiet, and set this item to “Enabled”.

*Enter Windows, and select [Start]->[Settings]->[Control Panel]->[Power Op-

tions]. Enter Power Options Properties tag, and select MinimalPower Managementunder Power schemes.

C1E Support

To enable this item to read the CPU power consumption while idle. Not all porcessors support Enhanced Halt tate (C1E).

Adjust CPU FSB Frequency (MHz)

This item allows you to select the CPU Front Side Bus clock frequency (in MHz).

OC Stepping

This item will be enabled after you set the overclocking frequency in the “Adjust CPU FSB Frequency (MHz)”. And the following items will appear. This items will help the system to overclock step by step after system booting up.

Start OC Stepping From (MHz)

This item is used to set the initial base clock. The system will boot with the initial base clock, and start to overclock from initial base clock to set base clock that you set in “Adjust CPU FSB Frequency (MHz)” step by step.

OC Step

This item is used to set how many steps for base colck overclocking.

OC Step Count Timer

This item is used to set the buffer time for every step.

Adjust CPU Ratio

This item is used to adjust CPU clock multiplier (ratio). It is available only when the processor supports this function.

Adjusted CPU Frequency (MHz)

It shows the adjusted CPU frequency. Read-only.

Adjust CPU-NB Ratio

This item is used to adjust CPU-NB ratio.

Adjusted CPU NB Frequency (MHz)

It shows the adjusted CPU-NB frequency. Read-only.

Unlock CPU Core

This item allows you to unlock the additional cores, you could set it [Enabled] and then set Advanced Clock Calibration [Auto] in order to be able to activate the processor cores.

Advanced Clock Calibration

This item is for overclock. Setting to [Auto] allows you to set the CPU Ratio higher. It is available only when the processor supports this function.

CPU Core Control

This item is used to control number of CPU cores. When set to [Auto], the CPU will operate under the default number of cores. When set to [Manual], you will be able to enable/disable the specific CPU core.

Core X

These items are used to enable/disable the core X.

OC Genie Lite

Setting this item to [Enabled] allows the system to detect the maximum FSB clock and to overclock automatically. If overclocking fails to run, you can try the lower FSB clock for overclocking successfully.

Memory-Z

Press <Enter> to enter the sub-menu.

DIMM Memory SPD Information

Press <Enter> to enter the sub-menu. This sub-menu displays the information of installed memory.

Advance DRAM Configuration Press <Enter> to enter the sub-menu.

DRAM Timing Mode

Select whether DRAM timing is controlled by the SPD (Serial Presence Detect) EEPROM on the DRAM module. Setting to [Auto] enables DRAM timings and the following “Advance DRAM Configuration” sub-menu to be determined by BIOS based on the configurations on the SPD. Selecting [Manual] allows users to configure the DRAM timings and the following related “Advance DRAM Configuration” sub-menu manually.

FSB/DRAM Ratio