MSD 8889 Installation

MSD-to-Dodge Harness

PN 8884/PN 8889

FACTORY DODGE HARNESS (UNPLUGGED FROM COIL)

Parts Included:

1 - MSD Harness

IMPORTANT: Review the Ignition Control Instructions before attempting the installation.

The MSD-to-Dodge Coil Harness is designed to provide a splicefree and simple installation of an MSD Ignition Control to late model Dodge vehicles equipped with the coil shown in Figure 1.

MSD 6 and 7 Series Ignitions

All of the wires connect to the corresponding colored wires (Figure

2). MSD 7 Series Ignitions share the same color wires.

1. Disconnect the connector from the coil and connect it to the MSD PN 8884/PN 8889 Harness.

2. Connect the other end of the Harness to the Coil.

3. Connect the four wires of the Harness to the MSD Ignition Control.

1998-2003, PN 8884/1990-1997, PN 8889

Figure 1 Dodge Coil.

M S D I G N I T I O N • ww w. msd ig ni tio n. co m • ( 9 15 ) 8 57 -5 20 0 • FA X (9 15) 85 7 -3 34 4

Figure 2 Installation with an MSD 6 or 7 Series Ignition Control.

Installation with an MSD Timing Control

FACTORY DODGE HARNESS (UNPLUGGED FROM COIL)

The PN 8884/PN 8889 may still be used when adding an MSD Timing Control. Figure 3 shows a common installation.

Figure 3 Wiring in an MSD Timing Control with a 6 or 7 Series Ignition.

MSD 5 and Blaster Ignition

Note that the MSD 5 and Blaster Ignitions wire differently than the 6 and 7 Series Ignitions. The Red wire of the MSD 5 or Blaster Ignition connects to both the Harness Orange and Red wires (Figure 4).

In case of malfunction, this MSD component will be repaired free of charge according to the terms of the

warranty. When returning MSD components for service, Proof of Purchase must be supplied for warranty veriﬁcation. After the warranty period has expired, repair service is charged based on a minimum and maximum charge.

All r et urns must have a Return Mater ia l Au thoriza ti on (RMA) numb er i ssued to th em b efore being returned. To obta in an RMA number please con ta ct MSD Customer Ser vi ce at 1 (888) MSD-7859 or visit our website at www.msdignition.com/rma to automatically obtain a number and shipping information.

When returning the unit for repair, leave all wires at the length in which you have them installed. Be sure to include a detailed account of any problems experienced, and what components and accessories are installed on the vehicle.

The repaired unit will be returned as soon as possible after receipt. (Ground shipping is covered by warranty). All units are returned regular UPS unless otherwise noted. For more information, call MSD Ignition at (915) 855-7123. MSD technicians are available from 7:00 a.m. to 6:00 p.m. Monday - Friday (mountain time).

M S D I G N I T I O N • ww w. msd ig ni tio n. co m • ( 9 15 ) 8 57 -5 20 0 • FA X ( 91 5) 8 57 -3 34 4

FRM28442 Revised 03/07 Printed in U.S.A.

Figure 4 Installation with an MSD 5 or Blaster Ignition.

Service