MSD 5526 Installation

Street Fire Blaster GM Dual Connector Coil

PN 5526

ONLINE PRODUCT REGISTRATION: Register your MSD product online and you’ll be entered in our monthly 8.5mm Super Conductor Spark Plug Wire give-away! Registering your product will help if there is ever a warranty issue with your product and helps the MSD R&D team create new products that you ask for! Go to www.msdignition.com/registration.

IMPORTANT: Read instructions before attempting the installation.

Parts Included:

1 - Street Fire GM Dual Connector Coil

WARNING: During installation, disconnect the battery cables. When disconnecting

the battery, always remove the Negative cable ﬁrst and install it last.

The Street Fire GM Dual Connector Coil is designed to produce increased voltage and energy over the stock GM Coil. To improve your vehicle’s ignition, try a set of Street Fire Spark Plug wires!

1. Disconnect the stock coil connectors and the spark plug wire.

2. Remove the factory coil. It may be necessary to remove the factory coil bracket to drill the rivets out to remove the stock coil.

3. Install the Street Fire GM Coil and mount it with the supplied hardware.

4. Plug in the wiring connectors and the coil wire.

S T R E E T F I R E • W WW .S TR EE T- FI RE .C OM • ( 91 5) 8 57 -5 20 0 • FA X (915) 8 57 - 3 3 4 4

1 - Parts Bag

Figure 1 Installing the

Street Fire GM Dual

Connector Coil.

Service

In case of malfunction, this MSD component will be repaired free of charge according to the terms of the warranty. When returning

MSD components for warranty service, Proof of Purchase must be supplied for veriﬁcation. After the warranty period has expired, repair service is based on a minimum and maximum fee.

All r etu r ns m u st hav e a Ret u rn M a ter i al Au t hor i zat i on ( R MA) n u mbe r is sued t o t hem be fo re

bei ng r etu r ned . To o b tai n an R M A n umbe r p l eas e c o nta c t M SD C ust o mer Se r vic e a t 1 (8 88) MS D -78 59 or visit our webs ite at www.msdperformance.co m/rma to automaticall y obt ain a number and shipping informat ion.

When returning the unit for repair, leave all wires at the length in which you have them installed. Be sure to include a detailed account of any problems experienced, and what components and accessories are installed on the vehicle. The repaired unit will be returned as soon as possible using Ground shipping methods (ground shipping is covered by warranty). For more information, call MSD at (915) 855-7123. MSD technicians are available from 7:00 a.m. to 5:00 p.m. Monday - Friday (mountain time).

SD warrants this product to be free from defects in material and workmanship under its intended normal use*, when properly installed and purchased from an authorized MSD dealer, for a period of one year from the date of the original purchase. This warranty is void for any products purchased through auction websites. If found to be defective as mentioned above, it will be repaired or replaced at the option of MSD. Any item that is covered under this warranty will be returned free of charge using Ground shipping methods. This shall constitute the sole remedy of the purchaser and the sole liability of MSD. To the extent permitted by law, the foregoing is exclusive and in lieu of all other warranties or representation whether expressed or implied, including any implied warranty of merchantability or ﬁtness. In no event shall MSD or its suppliers be liable for special or consequential damages. *Intended normal use means that this item is being used as was originally intended and for the original application as sold by MSD. Any modiﬁcations to this item or if it is used on an application other than what MSD markets the product, the warranty will be void. It is the sole responsibility of the customer to determine that this item will work for the application they are intending. MSD will accept no liability for custom applications.

Limited Warranty

S T R E E T F I R E • WW W . S T R E E T - F I R E . C O M • ( 91 5) 857-5200 • F A X (9 15 ) 857-3344

FRM28608 Revised 12/11 Printed in U.S.A.