Important Battery lnformation
-Only use Alkaline or Lithium batteries. We recommend the use of Duracell or Energizer batteries.
-Do not mix old and new batteries. Always replace ALL the batteries at the same time.
-When the camera is not in use, please remove the batteries.
Moultrie Limited Warranty
This product has been thoroughly tested and inspected before shipment. It is guaranteed from defects in material and workmanship from the date of purchase for 1 year. Under this limited guarantee we agree to replace or repair free of charge any part or parts which have been found to be defective in original material or workmanship. Should you require in-warranty service, call our Customer Service Department. If your problem cannot be addressed over the telephone, we may need you to send us your defective product plus proof of purchase.
You must register your camera at www.moultriefeeders.com/warranty to activate your 1-year warranty.
Troubleshooting
Please visit www.moultriefeeders.com/contact-us for troubleshooting and helpful tips.
Returns and Repairs
Please visit http://www.moultriefeeders.com/return-policy and complete the form or our Service Department will gladly answer any questions you have. Call 800-653-3334, Monday - Friday, 8:00 AM to 5:00 PM CST.
FCC Statements
Moultrie Products
MCG-12694
M-990i (Gen2)
Note: changes and modifications not expressly approved by the party responsible could void the user’s authority to operate this device.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
NOTE: THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS EQUIPMENT. SUCH MODIFICATIONS COULD VOID THE USER’S AUTHORITY TO OPERATE THE EQUIPMENT.
NOTE: This device complies with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This device generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this device does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-lncrease the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
www.moultriefeeders.com
PRADCO Outdoor Brands • 3280 Highway 31, Ste B • Calera, AL 35040
Instructions for M-99Oi (Gen2)
Digital Game Camera
THANK YOU for your purchase of the M-990i (Gen2) Digital Game Camera. Please read this booklet before using the unit. If you should have any questions about this product or any other Moultrie product, please contact us using the information on the back of this booklet. Please register your camera at www.moultriefeeders.com/warranty to activate your 1-year warranty.
I CAMERA OVERVIEW
FRONT VIEW
Motion Sensor |
|
|
|
|
Infrared LED Flash |
|
|
|
|
||
|
|
|
Camera Lens |
||
|
|
|
|
|
|
|
|
|
|
|
LCD Display
|
|
|
|
|
|
|
|
|
|
|
|
|
SD Card Slot |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
PLAYBACK |
|
|
|
|
|
|
|
|
|
|
|
Status Indicator |
|
|
|
|
|
|
|
|
|
|
|
||||
|
|
|
|
|
|
|
|
|
|
|
Menu Button |
||
|
|
|
|
|
|
|
|
|
|
|
|||
QUICK START |
|
|
|
|
|
|
|
|
|
|
|
|
OK/Select Button |
|
|
|
|
|
|
|
|
|
|
|
|
||
CUSTOM START |
|
|
|
|
|
|
|
|
|
|
|
||
|
|
|
|
|
|
|
|
|
|
|
Navigation Buttons |
||
AIM |
|
|
|
|
|
|
|
|
|
|
|
||
|
|
|
|
|
|
|
|
|
|
|
|||
OFF |
|
|
|
|
|
|
|
|
|
|
|
|
|
Push Button |
Release |
|
for battery compartment |
||||||||||
|
|
|
|||||||||||
|
|
|
|||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
BOTTOM VIEW
External Power Port |
|
|
|
USB Port |
|
|
10232014 / MCG-12694
M-990i (Gen2) Digital Game Camera |
Page 1 |
|
MOULTRIE M-990i
MAIN MENU |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
MOTION DETECT |
|
|
|
|
|
|
|
|
|
|
|
TIMELAPSE |
|
|
|
|
|
|
*Set options in their |
|
|
|
|
MOTION + TL |
|
||
|
respective menus. |
||
|
|
|
GENERAL SETTINGS INFOSTRIP SETTINGS
PHOTO/VIDEO
SETTINGS
MEMORY SETTINGS
SYSTEM SETTINGS
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
DETECTION DELAY |
|
||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
TL INTERVAL |
|
|
|
PIR SENSITIVITY |
|
||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
TL PROGRAM #1 |
|
|
|
MULTI-SHOT |
|
||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
TL PROGRAM #2 |
|
|
|
PHOTO OR VIDEO |
|
||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
RESET OPTIONS |
|
|
|
RESET OPTIONS |
|
||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
*If Timelapse Program #1 is set to Always On, settings for Program #2 will be disabled.
DEFAULT SETTINGS
General |
|
DATE/TIME: |
11/11/14 11:11pm |
|
|
PHOTO QUALITY: |
HIGH (4 MP) |
|
|
VIDEO QUALITY: |
HD (1280 x 720) |
VIDEO LENGTH: |
10 SECONDS |
|
|
MOTION FREEZE: |
ON |
|
|
CAMERA NAME: |
MOULTRIECAM |
INFOSTRIP ACTIVE: |
YES |
|
|
TEMPERATURE: |
FAHRENHEIT |
|
|
AC CONNECTED?: |
NO |
PROGRAM SECURITY CODE: |
00000 |
|
|
MANAGED MEMORY: |
DO NOT OVERWRITE |
|
|
ERASE ALL IMAGES: |
NO |
RESET TO FACTORY DEFAULTS: |
NO |
|
|
O MOULTRIE ACCESSORIES (Sold Separately)
Using a Tree Mount
The camera can also be mounted directly to a tree using a mounting bracket that attaches directly to a tree or pole. Strap the tree mount to the tree and secure, then attach the camera to the tree mount using the tree mount socket located on the back of the camera.
Using the Moultrie AC Adapter
Keep your Moultrie camera running in the field with the constant power of an AC adapter. Plug into a standard 110-240VAC 50-60Hz electrical outlet and then connect to the External Power Port on your Moultrie camera.
Note: Leave internal batteries in the camera during use. In the event of power loss to the outlet into which the AC adapter is plugged, the internal batteries will keep your camera running.
Using the Moultrie Camera Power Panel
Place near the tree where the camera is mounted. Place for best exposure to sun. To attach to a tripod secure the power panel to the tripod angled upward for best exposure. Plug the power panel to the Power Panel Plug. This will extend the life of your camera in the field.
Note: Leave internal batteries in the camera during use. The Camera Power Panel needs 4 hours of sunlight to fully power the camera.
Using the Moultrie Battery Box
Extend the field life of your Moultrie camera with a long-lasting, rechargeable external power source. Place near the tree where the camera is mounted. Plug the Battery Box to the Power Panel Plug.
This will extend the life of your camera in the field.
Page 2 |
M-990i (Gen2) Digital Game Camera |
M-990i (Gen2) Digital Game Camera |
Page 19 |
|
|
N VIEWING YOUR IMAGES OFF THE CAMERA
MENU MAP
There are a number of ways for you download and view the pictures, videos in the field or at another location.
Removing the SD Card
To remove the SD Memory Card, open the camera cover and push gently on the SD card and it will pop out slightly allowing you to remove it. Load the SD card into the player or card reader to view or move stored images to another location.
Important
Make sure that the camera is in the OFF position before removing SD card.
ln the Field
You can download the pictures, videos, and time lapse pictures with the aid of external devices. To download, use an external player or card reader that is supported by 12V DC or Mini USB Jack.
At Home
Remove the entire camera and transport to another location to download images. To connect the camera to a PC computer, turn the camera ON, press the MENU button once to change to SETUP Mode. Connect the USB cord (not included) between the USB out port and the PC computer. The computer will recognize the camera as a removable drive. The unit works with Windows XP/Vista/7 or Mac OS X 10.1 or higher. Copy the images and videos from the camera onto your PC for further editing or printing. When the USB cable is disconnected, the camera will go back to SETUP mode.
See the full line of Moultrie camera accessories at www.moultriefeeders.com
|
GENERAL SETTINGS |
|
|
INFOSTRIP SETTINGS |
DATE & TIME |
MEMORY SETTINGS |
ERASE ALL IMAGES |
|
CAMERA NAME |
|
MANAGED |
|
|
MEMORY |
|
|
|
|
|
|
TEMPERATURE F/C |
SYSTEM SETTINGS |
AC CONNECTED |
|
INFOSTRIP ACTIVE |
|
SECURITY CODE |
PHOTO/VIDEO |
PHOTO RESOLUTION |
|
FACTORY RESET |
SETTINGS |
|
||
|
|
|
|
|
MOTION FREEZE |
|
UPGRADE |
|
|
FIRMWARE |
|
|
|
|
|
|
VIDEO RESOLUTION |
|
|
|
VIDEO LENGTH |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Motion Detect |
|
Time Lapse |
|
|
|
RESET OPTIONS?: |
DO NOT RESET |
TIME LAPSE INTERVAL: |
10 SECONDS |
|
|
|
|
|
|
|
|
DETECTION DELAY: |
10 SECONDS |
TIME LAPSE PROGAMS/DAY: |
2 PROGRAM |
|
|
|
|
|
|
|
|
PIR SENSITIVITY: |
HIGH |
T.L. PROGRAM #1 START TIME: |
6 AM |
|
|
|
|
|
|
|
|
MULTI-SHOT: |
1 (OFF) |
T.L. PROGRAM #1 STOP TIME: |
9 AM |
|
|
|
|
|
|
|
|
PHOTO OR VIDEO: |
PHOTO |
T.L. PROGRAM #2 START TIME: |
4 PM |
|
|
|
|
|
|
|
|
|
|
T.L. PROGRAM #2 STOP TIME: |
7 PM |
|
|
|
|
|
|
|
Page 18 |
M-990i (Gen2) Digital Game Camera |
M-990i (Gen2) Digital Game Camera |
Page 3 |
|
|