Moultrie I40XT User Manual

Instructions for I40XT

PlotStalker Software

PLOTSTALKER ACTIVITY SEARCH

B

ACTIVITY SEARCH

The Search Feature will scan through your photos and automatically
look for changes in regions that you identify in Setup.

In search mode, the PlotStalker software scans through the .mlt photo
file, stops on a photo when changes are found in your identified region,
and then highlights the changes in blue. You can click anywhere on the
screen to remove the blue highlights.

ACTIVITY SEARCH SETUP

Click the Settings button to activate
the Region and Sensitivity settings
for the Activity Search

1

2

3

Click on the Set Motion Search Area Button.

Use the mouse ro select and drag the red outline around the area you want to
search for movement. This allows you to focus on a very precise area if
required.

Click OK button on the Settings Popup window to confirm your settings and
exit the menu.

Set to High, Medium or Low - This sets the level of pixel change the program
will detect. Note; a pixel change will occur with a color, intensity, lighting or
movement so this setting is critical to obtain the desired results.

1

SENSITIVITY

Click on Default button to return to the default values for Search Area and
Sensitivity settings

1

DEFAULT SETTINGS

DEFINE SEARCH REGION

Provides the ability to search for
changes in the photo in a specific
region rather than the entire photo.

GameSpy Digital Camera

THANK YOU for your purchase of the Model I40XT GameSpy Digital Camera.
Please read this booklet before using the unit. If you should have any questions
about this product or any other Moultrie product, please contact us using the
information on the back of this sheet. Please register your camera at
www.moultriefeeders.com to activate your warranty.

LED Flash

Motion Sensor

Camera Lens

LCD Display

ON/OFF/AIM

Battery Compartment

TV Out

Navigation ButtonsMode Button

USB Port

SD Card Slot

Battery Compartment

ON / OFF / AIM SWITCH

Used for turning On, turning Off, or Aiming the camera. When in AIM position the
red LED light on the front of the camera will illuminate. To help find the center field
of view for the camera, stand out in front of the camera and move left or right as you
observe the AIM LED - as you walk away from direct center the LED light will be
less bright. As you walk towards center the LED will appear brighter.

MODE BUTTON

The Mode Button selects the three modes of the camera -Auto, Camera Setup Menu, and
Cellular Setup Menu. When either of the Menu modes are selected, the UP and DOWN
buttons navigate through the menu options. The Mode Button is also used to wake-up
the camera and turn on the display when the camera is in a power saving mode

MENU NAVIGATION BUTTONS

The menu navigation buttons are used to navigate around the LCD display.
UP/DOWN moves to the next menu option, OK selects the menu option to be
changed. The LEFT/RIGHT buttons select the parameter field to be changed. When a
parameter field is selected it will flash on the LCD display. When a parameter field is
selected, the UP/DOWN buttons navigate through the options for the field and the OK
button selects the parameter value indicated on the display. The OK button is also used
to manually take a picture.

SD MEMORY CARD SLOT

Accepts up to a 16GB SD Card for photo storage. Note: An SD Card must be installed
for the camera to operate.

USB PORT

Download still pictures and video onto your computer by connecting provided cable

POWERPANEL PORT

Accepts the Moultrie PowerPanel accessory (sold separately) only. Refer to
www.moultriefeeders.com for more information.

TV OUT JACK

View still pictures and videos on your TV by connecting a 2.5mm video cable
(sold separately).

.

Aux Power

I40XT GameSpy Digital Camera

I40XT GameSpy Digital Camera

Open the camera case cover by unfastening the two cover clips on the right

PlotStalker Software

ADVANCED SETUP

VI

2/9/2010

VIEWING PICTURES ON COMPUTER VIA USB

1. Plug provided USB cable into the USB port on your
Windows 7/Vista/XP computer.

2. Plug other end of USB cable into the camera's USB port.

3. To access JPG pictures and AVI movie files, navigate to "My Computer" and
double click the "Moultrie CAM" drive. Picture files will be stored In the
DCIM directory; video files are located in the DCIM directory.

4. To exit USB mode, follow Window's instructions for properly disconnecting
a removable drive and then unplug

side of the cover.

The GameSpy offers several modes of operation as described below. The camera
is in Trail Cam Mode by default.

Locate the battery compartments on each side of the LCD display. Slide the
battery compartment cover plates in the direction of the arrows and remove
the cover plates.

Install six (6) C size Alkaline batteries with polarities as indicated on battery
compartment (3 per side). Re-install the battery compartment cover plates
securely.

Secure Camera to tree or pole using strap loops on back and provided Strap.

Turn Camera on by sliding ON/OFF/AIM switch to the ON position. Press the
MODE button one time to get to the Camera Setup Menu. Set Time and Date by
pressing OK, using the UP or DOWN buttons to adjust selected field, the LEFT or
RIGHT buttons to move to the next field and OK when done.

Press MODE button until TRAIL CAM is displayed Your Camera will now
automatically take pictures or video whenever an animal is detected in range

-based on the default settings below.

Menu Option Setting

Capture Mode Trail Cam (still)
Photo Quality High
Photo Delay after each photo is taken 1 minute
Multi Shot Count 1-Shot
Video Resolution High
Video Length 5 seconds
Camera Name MYCAMERA
Temperature Fahrenheit
IR Test OFF
Info Strip printed on photos ON
Default Settings NO
Delete All NO
Flash ON

SETUP

Enables you to customize the operation of your camera - refer to the
CAMERA SETUP section of this manual. The camera automatically goes
into the mode you have selected, below, after 90 seconds of inactivity.

TRAIL CAM MODE

Still photos taken when an animal is detected. The number of photos taken
when an animal is detected is configurable in Settings. Photos are stored in
the in the DCIM/100_MDGC folder on the SD card.

PLOT CAM MODE

The camera takes photos at a specified interval during the day and combines
them together to create a Plot Video (*.MLT file) which can be viewed on the
supplied Moultrie Plot Stalker software. The camera takes a Plot Video twice
a day; once in the morning and once in the evening. The morning Plot Video
begins 30 min before sunrise. The evening Plot Video ends 30 min after
sunset. See chart below as a reference. The length of each Plot Video is
determined by the Plot Duration setting in the camera menu. The camera will
detect the correct sunrise and sunset times automatically and adjust itself
accordingly. The Plot Videos are stored in :/PLOT folder on the SD card.

IMPORTANT: It will take the camera 24hrs to properly adjust to the correct sunrise
and sunset times. As a default the camera will start the morning Plot Video at 5:30am
and end the evening video at 6:30pm. To reset the sunrise and sunset times back to the
default times, use the Default Settings option in the menu.

{

Morning Plot Video Evening Plot Video

HYBRID CAM MODE

4

Camera operates in Plot Cam mode during the day and Trail Cam Mode during
the night. Thirty minutes after dusk the camera will enter the Trail Cam mode
and take night photos when the PIR sensor is triggered.

VIDEO MODE

5

Camera records a user video when an animal is detected during daylight.
The video length is configurable in Settings.

I40XT GameSpy Digital Camera

I40XT GameSpy Digital Camera