Motorola V3I User Manual

1

Press battery door release latch and
remove battery door.

2

Slide card under metal clip and into
card slot. Card should be inserted
with the print side up.

motorola RAZR V3i with iTunes®

Install Memory Card

3

Replace battery cover.

View Storage Information

motorola RAZR V3i with iTunes®

1

Press the Menu key, then select

Settings
Phone Status
Storage Devices

2

Press Details.

Tip: Press Menu key to
format or rename the card.

View Multimedia

motorola RAZR V3i with iTunes®

1

Press the Menu key, then select

Multimedia
Pictures, Sounds, or Videos

2

The icon at the top of the picture
list shows whether the pictures
are on the memory card or in
phone memory. To switch to the
other storage device, press the

Menu key and select

Switch Storage Device
Memory Card or Phone

3

Select the picture and press View.

Transfer Multimedia

motorola RAZR V3i with iTunes®

1

Press the Menu key,
then select

Settings
Connection
USB Settings

3

Attach one end of the Motorola
Original Enhanced USB cable to your
phone and the other end to a USB port
on your computer.

4

Find where your phone's memory card
displays as a Removable Disk icon.

On a PC, this is the My Computer
window. On a Mac, it's on the desktop.

Double click the Removable Disk icon.

5

Drag and drop files between
your computer and phone.
Use the following folders
when copying files to the
memory card:

mobile/picture - pictures,

wallpaper,
screen
savers

mobile/video - video clips
mobile/audio - MP3 files

6

When you finish, remove the
phone with memory card safely
from your computer.

On a PC, right click the Safely
Remove Hardware icon at the
bottom of your computer screen,
then select USB Mass Storage
Device and press Stop.

On a Mac, select and drag the
Removable Disk icon to the Trash.

7

Select USB Mass Storage Device
and press OK.

Now it is safe to disconnect the
cable.

2

Scroll right to change

Default Connection to
Memory Card.

Take and Send a Picture

motorola RAZR V3i with iTunes®

1

Press the Menu key, then select

Multimedia
Camera

2

To view or change where your
pictures are stored, press the

Menu key, then select

Switch Storage Device
Memory Card or Phone

3

To change the picture
resolution, press the Menu
key and select

Pictures Setup
Change

Note: High-resolution

pictures can be stored only
on the memory card. You
may not be able to send
high-resolution pictures in a
multimedia message. Check
with your service provider
on file size restrictions.

4

Scroll up or down to view
camera settings.

5

Press Capture or center
navigation key.

6

Press Send

-or-

Press the Menu key for other
storage options.

7

Enter a short message
(optional), then press Send To.

8

Scroll right or left to change
a setting.

Select one or more names
from your phonebook.

Select the name, then press
center navigation key so a
checkmark appears.

Select the name again to
remove it from the message
(checkmark disappears).

Press Send.

Record a Video

motorola RAZR V3i with iTunes®

1

Press the Menu key, then select

Multimedia
Video Camera

2

To view or change where your
pictures are stored, press the

Menu key, then select

Switch Storage Device
Memory Card or Phone

3

Scroll up or down to view
video settings.

4

To start recording,
press Capture.

To stop recording,
press Stop.

5

Press the center navigation
key to store the video on
your phone.

-or-

Press Options and select
Send in Message to send the
video in a multimedia
message (MMS).

Scroll right or left to change
a setting.

Play a Video

motorola RAZR V3i with iTunes®

1

Press the Menu key, then select

Multimedia
Videos

2

View videos on memory card
or phone memory by pressing

Menu key, then selecting

Switch Storage Device
Memory Card or Phone

4

Scroll up to pause/play.

Scroll down to stop.

Scroll right/left to skip to
next/previous video.

3

Select a video and press Play.

Transfer Music

motorola RAZR V3i with iTunes®

1

To transfer and play songs
using iTunes®, you must:

• Install a memory card in
the phone.

• Set the default USB
connection to the memory
card.

• Install the iTunes desktop
application on your
computer. Use the CD­ROM that came with your
phone, or download the
latest version from

www.itunes.com/download.

Note: iTunes version 6.0.1
or higher is required.

For information on how to
transfer songs with a bit rate
higher than 128 kbps, see your
phone's

Press the Menu key, then select

Settings
Connection
USB Settings

User Guide.

2

Scroll right to change

Default Connection to
Memory Card.

3

On your computer, open the iTunes
desktop application.

4

Connect one end of the Motorola
Original Enhanced USB cable to your
phone and the other end to a USB port
on your computer.

5

Wait for the phone icon to appear in the
Source list. This may take up to one
minute.

6

To manually transfer songs, drag and
drop them to the phone icon in the
Source list.

-or-

To transfer a random selection of
songs, select your phone in the Source
list and then click Autofill. Songs are
transferred according to your settings
in the iTunes desktop application.

Note: Transfer times depend on the
size of the song. An average song may
take 45 seconds or longer to download
to the phone.

7

When the transfer is complete,
you will see a message in the
iTunes desktop application and
the Do Not Disconnect message
on the phone disappears.

Click the Eject button next to the
phone icon in the desktop
application and remove the cable.
Do not disconnect the cable until
the transfer is complete.

Play Songs

motorola RAZR V3i with iTunes®

1

To add music to your iTunes
library, you can purchase music
from the iTunes Music Store or
import CDs.

To learn more, visit

www.apple.com/support/itunes

for information on how to load
music into iTunes.

Press the iTunes key.

2

Select Songs, then scroll right.
Select a song and press Play.

Tip: To play all songs in a list,
select Playlist, Artists, Albums,
or Songs then scroll right. Select
All and press Play.

3

Scroll up or down to adjust the
volume.

4

Use the wired stereo headset
to listen to music.

You cannot listen to music
using a Bluetooth® headset or
while a Bluetooth headset is
connected to your phone (turn
the headset power off).

Scroll left or right to play the
previous or next song.

Press and hold the left or right
navigation key to rewind or fast
forward the current song.

Pair (Link) Headset

motorola RAZR V3i with iTunes®

1

Press the Menu key, then select

Settings
Connection
Bluetooth Link
Setup

2

Select Power, then scroll right
to turn the power On.

3

On the headset, press and hold the Call
button until the light turns on and
remains steadily lit.

If the light is flashing or does not remain
steadily lit, make sure the headset is fully
charged and repeat this step.

4

On your phone, press Back,
then select

Handsfree
Look for Devices

Note: If your headset has a folding

microphone, quickly unfold the
microphone as soon as the light is
steadily lit.

Pair (Link) Headset

motorola RAZR V3i with iTunes®

5

Select the headset, then press
Yes when prompted to bond.

6

Enter the passkey 0000 and
press Ok.

When pairing is successful, the
headset light changes from
steadily lit to flashing and the
Bluetooth icon appears in the
top status bar.

7

To test the pairing connection,
put the headset on and make a
call.

If your phone and headset are
successfully paired, you will
hear ringing.

To save battery life, keep your
headset turned off when not in
use.

Autoconnect Headset

motorola RAZR V3i with iTunes®

1

After you pair (link) your headset
and phone, you can set up your
phone to automatically connect
to the headset when you turn
the headset on.

Press the Menu key, then select

Settings
Connection
Bluetooth Link
Device History

2

Select the headset.

3

Select Access, scroll right to
change it to Automatic, and
press Done.

4

To use your headset, turn the
headset power on.

To disconnect your phone from
the headset, turn the headset
power off.