Motorola SA100A, SA10A, SA120A, SA110A, SA11A Datasheet
...
MOTOROLA
SEMICONDUCTOR
TECHNICAL DATA
Motorola TVS/Zener Device Data
4-1
500 Watt Peak Power Data Sheet
Devices listed in bold, italic are Motorola preferred devices.
Zener Transient Voltage Suppressors
Unidirectional and Bidirectional
The SA5.0A series is designed to protect voltage sensitive components from high voltage, high energy transients. They have excellent clamping capability, high surge capability,
low zener impedance and fast response time. The SA5.0A series is supplied in Motorola’s
exclusive, cost-effective, highly reliable Surmetic axial leaded package and is ideally-suited
for use in communication systems, numerical controls, process controls, medical equipment, business machines, power supplies and many other industrial/consumer applications.
Specification Features:
• Stand-off Zener Voltage Range — 5 to 170 V
• Peak Power — 500 Watts @ 1 ms
• Maximum Clamp Voltage @ Peak Pulse Current
• Low Leakage < 1 µA Above 8.5 Volts
• Maximum Temperature Coefficient Specified
• Response Time is Typically Less than 1 ns
Mechanical Characteristics:
CASE: Void-free, transfer-molded, thermosetting plastic
FINISH: All external surfaces are corrosion resistant and leads are readily solderable
POLARITY: Cathode indicated by polarity band. When operated in zener mode, will be
positive with respect to anode
MOUNTING POSITION: Any
WAFER FAB LOCATION: Phoenix, Arizona
ASSEMBLY/TEST LOCATION: Guadalajara, Mexico
MAXIMUM RATINGS
Rating Symbol Value Unit
Peak Power Dissipation (1)
@ TL ≤ 25°C
P
PK
500 Watts
Steady State Power Dissipation
@ TL ≤ 75°C, Lead Length = 3/8″
Derated above TL = 75°C
P
D
3
30
Watts
mW/°C
Forward Surge Current (2)
@ TA = 25°C
I
FSM
70 Amps
Operating and Storage Temperature Range TJ, T
stg
– 55 to +175 °C
Lead Temperature not less than 1/16″ from the case for 10 seconds: 230°C
NOTES: 1. Nonrepetitive current pulse per Figure 4 and derated above TA = 25°C per Figure 2.
NOTES: 2. 1/2 sine wave (or equivalent square wave), PW = 8.3 ms, duty cycle = 4 pulses per minute maximum.
SA5.0A
through
SA170A
MOSORB
ZENER OVERVOLTAGE
TRANSIENT
SUPPRESSORS
5–170 VOLT
500 WATT PEAK POWER
3 WATT STEADY STATE
CASE 59-04
PLASTIC
SA5.0A through SA170A
Motorola TVS/Zener Device Data
4-2
500 Watt Peak Power Data Sheet
ELECTRICAL CHARACTERISTICS
(TA = 25°C unless otherwise noted) VF = 3.5 V Max, IF* = 35 A (except bidirectional devices).
Breakdown Voltage
Working Peak
Maximum
Maximum
Maximum
Maximum
{{
VBR{{
(Volts)
Reverse
Surge
Device Min Max
@ I
T
(mA)
V
RWM
**
(Volts)
@ V
RWM
IR (µA)
Current I
RSM
{
(Amps)
(Clamping Voltage)
V
RSM
(Volts)
Variation
of VBR mV/°C
SA5.0A 6.4 7 10 5 600 54.3 9.2 5
SA6.0A 6.67 7.37 10 6 600 48.5 10.3 5
SA6.5A 7.22 7.98 10 6.5 400 44.7 11.2 5
SA7.0A 7.78 8.6 10 7 150 41.7 12 6
SA7.5A 8.33 9.21 1 7.5 50 38.8 12.9 7
SA8.0A 8.89 9.83 1 8 25 36.7 13.6 7
SA8.5A 9.44 10.4 1 8.5 5 34.7 14.4 8
SA9.0A 10 11.1 1 9 1 32.5 15.4 9
SA10A 11.1 12.3 1 10 1 29.4 17 10
SA11A 12.2 13.5 1 11 1 27.4 18.2 11
SA12A 13.3 14.7 1 12 1 25.1 19.9 12
SA13A 14.4 15.9 1 13 1 23.2 21.5 13
SA14A 15.6 17.2 1 14 1 21.5 23.2 14
SA15A 16.7 18.5 1 15 1 20.6 24.4 16
SA16A 17.8 19.7 1 16 1 19.2 26 17
SA17A 18.9 20.9 1 17 1 18.1 27.6 19
SA18A 20 22.1 1 18 1 17.2 29.2 20
SA20A 22.2 24.5 1 20 1 15.4 32.4 23
SA22A 24.4 26.9 1 22 1 14.1 35.5 25
SA24A 26.7 29.5 1 24 1 12.8 38.9 28
SA26A 28.9 31.9 1 26 1 11.9 42.1 30
SA28A 31.1 34.4 1 28 1 11 45.4 31
SA30A 33.3 36.8 1 30 1 10.3 48.4 36
SA33A 36.7 40.6 1 33 1 9.4 53.3 39
SA36A 40 44.2 1 36 1 8.6 58.1 41
SA40A 44.4 49.1 1 40 1 7.8 64.5 46
SA43A 47.8 52.8 1 43 1 7.2 69.4 50
SA45A 50 55.3 1 45 1 6.9 72.7 52
SA48A 53.3 58.9 1 48 1 6.5 77.4 56
SA51A 56.7 62.7 1 51 1 6.1 82.4 61
SA54A 60 66.3 1 54 1 5.7 87.1 65
SA58A 64.4 71.2 1 58 1 5.3 93.6 70
SA60A 66.7 73.7 1 60 1 5.2 96.8 71
SA64A 71.1 78.6 1 64 1 4.9 103 76
SA70A 77.8 86 1 70 1 4.4 113 85
SA75A 83.3 92.1 1 75 1 4.1 121 91
SA78A 86.7 95.8 1 78 1 4 126 95
SA85A 94.4 104 1 85 1 3.6 137 103
SA90A 100 111 1 90 1 3.4 146 110
SA100A 111 123 1 100 1 3.1 162 123
SA110A 122 135 1 110 1 2.8 177 133
SA120A 133 147 1 120 1 2.5 193 146
SA130A 144 159 1 130 1 2.4 209 158
SA150A 167 185 1 150 1 2.1 243 184
SA160A 178 197 1 160 1 1.9 259 196
SA170A 189 209 1 170 1 1.8 275 208
** 1/2 sine wave (or equivalent square wave), PW = 8.3 ms, duty cycle = 4 pulses per minute maximum. (continued)
** MOSORB transient suppressors are normally selected according to the maximum reverse stand-off voltage (V
RWM
), which should be equal to or greater than the dc or continuous peak
***operating voltage level.
{{
Surge current waveform per Figure 4 and derate per Figure 2.
{{
VBR measured at pulse test current IT at an ambient temperature of 25°C.
FOR BIDIRECTIONAL APPLICATIONS Preferred Bidirectional Devices —
USE CA SUFFIX for SA6.0CA through SA170CA SA6.5CA SA13CA SA18CA
Electrical characteristics apply in both directions. SA12CA SA15CA SA24CA
Reverse
Voltage
Reverse
Leakage
Reverse Voltage
@ I
RSM
Voltage
Temperature
Loading...