For Further Information .......................................................... 53
, Motorola, iDEN, and Call Alert are all trademarks of Motorola, Inc.
Message Mail is a service mark of Motorola, Inc.
r370/r470
GETTING STARTED
Introduction
YOUR r 370/ r 470 HANDHELD PORTABLE
Your r370/r470 handheld portable has features to keep you in
contact with anyone at anytime. Its features make it the most
versatile communication device on the market today. The main
features are:
▲ ▲ ▲ ▲ ▲ ▲ ▲
group call
private call
phone
Message Mail
Voice Mail
Fax/Data (
Advanced Features (
This guide explains the features most people use every day on
the r370/r470. The advanced features that are provided in the
r470 are described in the Advanced Features (r470) section. We
describe these features as they were set up by Motorola. Additionally, your service provider may offer 9.6/4.8 kbs Fax and data
support. For information on the data functionality of your r470,
please refer to the Circuit Data User’s Guide (publication number 68P81084C18).
470 only)
r
r
470 only)
Introduction
Your service provider and your organization may have customized
your portable to optimize its use for your individual needs.
Check with your service provider or organization to find out the
differences from this guide.
Additional information for your r370
and r470 Handheld Portable can be
found on the iDEN web site:
http://www.mot.com/LMPS/iDEN
r370/r470
GETTING STARTED
1
r
Introduction
FEATURE LOCATOR
Introduction
16a. (r370) Group/Private
Speaker Key
16b. (r470) Orange
Emergency Button
15. Volume
Control
Keys
14. Push-To-Talk
(PTT) Button
13. MENU Key
12. LED
11. Power/END
Key
10. Alphanumeric
Keypad
9. Speaker
1. Antenna
2. Earpiece
3. Alphanumeric
Display
4. Option Keys
5. Scroll Keys
MENU
Pwr
END
1
GHI
4
PQRS
7
Mode
2
5
8
0
ABC
JKL
TUV
SEND
DEF
3
MNO
6
WXYZ
9
6. SEND Key
7. Mode Key
8. Microphone
2
370/ r 470
GETTING STARTED
Introduction
1. Antenna - Install before using your unit.
2. Earpiece - Used to listen during phone calls and Group/Private
low-audio communication.
3. Alphanumeric Display - A four-line display, providing up to 12
characters per line.
4. Option Keys - Lets you select the option that
appears directly above the key on the fourth line of the display.
5. Scroll Keys - Lets you scroll through options and lists
that appear in the top three lines of the display, such as Phone,
Group, or Private Call lists.
6. SEND Key - Initiates outgoing phone calls. Also used to
SEND
answer an incoming phone call.
7. Mode Key - Used to change between Phone, Group, and
Mode
Private modes.
8. Microphone - Speak into during communications.
9. Speaker - Used to listen to high-audio Group and Private conversations.
Introduction
10. Alphanumeric Keypad - Used to enter telephone
numbers, Pri-
vate Call IDs, and alpha-numeric characters.
11. Power/END Key - Used to turn the portable on and off
Pwr
END
and to end phone calls.
12. LED - Indicates the service state. See page 6 for description of
states.
13. MENU Key - Lets you scroll through the menu options
MENU
available on the last line of the display within each mode.
14. Push-To-Talk (PTT) Button - Lets you transmit a Group or Private call, or Call Alert. Press and hold the PTT to talk, release to
listen.
15. Volume Control Keys - Lets you adjust volume levels.
16a. Group/Private Speaker Key - Lets you choose to hear
audio through earpiece or speaker during Group and Private calls.
16b. Orange Emergency Key - Used for emergency group calls.
r370/r470
GETTING STARTED
3
r
Introduction
BATTERY
Charging Your Battery
You should charge your portable battery
for at least 16 hours before initial use.
Introduction
This allows your battery to achieve its
maximum capacity and life.
Place the battery in the charger as
illustrated. You can also place the portable in the charger with the battery
attached.
Attaching Your Battery
Attach the charged battery to
your portable by aligning the
battery with the engraved
arrows on the portable. Slide
the battery upward until you
hear an audible click.
Engraved Arrows
Detaching Your Battery
To detach the battery, pull
back on the release button
near the top of the battery and
slide battery downward.
ANTENNA
Installing Your Antenna
Turn your unit off before installing or
removing the antenna.
Insert the bottom of the antenna into
the screw-in base on the top of the unit.
Turn clockwise by hand until snug. Do
not force.
4
370/ r 470
GETTING STARTED
Introduction
DISPLAY ICONS
Display icons appear along the top of your display and show the
following:
Signal Strength Indicator
Shows the signal strength. Calls and
messages may not be sent or received in
weak signal areas. Six bars indicates the
strongest signal.
Battery Strength Indicator
Shows the remaining charge in your
battery. Three bars show full charge.
The indicator will flash when you have
less than five minutes of talk time.
Voice Mail
Indicates that unplayed messages are
waiting in your voice mail box.
New Message Mail
Indicates that you have new text
messages in your mail box.
Introduction
r370/r470
Unread Message Mail
Indicates that you have unread Message
Mail.
Silent Ringer
Indicates that the phone ringer volume
is off.
Call Forward
Shows that incoming phone calls are
being fowarded.
Group/Private Speaker
Indicates that the Group/Private
Speaker is off and audio will be heard
through the earpiece.
GETTING STARTED
5
PPPPlllleeeeaaaasssseeee WWWWaaaaiiiitt
tt
PPPPhhhhoooonnnneeee RRRReeeeaaaaddddyy
yy
SSSSppppdddd#### MMMMaaaaiiiill
ll
r
Introduction
POWERING ON
Pwr
Press until a set of icons and squares appears on your
END
display (for a description of the icons, see page 5).
Introduction
“Please Wait” is displayed while the unit is registering on the
system.
Pwr
The LED indicator located next to the button shows the
END
in-service states of your portable:
▲ ▲ ▲ ▲
Flashing red.............Registering
Solid red...................No service
flashing green.........In service
Solid green...............In use
If registration is successful, the LED indicator will flash green
and the “Phone Ready” message will be displayed.
You can now place and receive Phone, Group, and Private calls.
If the unit cannot register on the system, the LED indicator will
flash red. The unit will continue to attempt registration approximately every two minutes as long as you keep the unit on.
POWERING OFF
Press and hold until you hear an audible beep and the message “Powering Off” is displayed.
6
Pwr
END
370/ r 470
GETTING STARTED
GGGGrrrroooouuuupppp RRRReeeeaaaaddddyy
yy
1111::::PPPPlllluuuummmmbbbbeeeerrrrss
ss
SSSS OOOOffffffff SSSSttttss
ss
Introduction
MODE
Press to switch between Phone, Group, and Private Call
modes.
Your display will appear similar to the following default screens
for the Phone, Group, and Private Call modes when your
portable is
mode name in the display, your unit is
Mode
In Service . If the word Ready does not appear after the
Each mode has several menu options, e.g.
Speed Dialing in Phone Mode, Area selec-
Introduction
tion in Group Mode, and Call Alert in Private Mode.
These menu options appear in the last line
of your display.
MENU OPTIONS
Selecting
r
Press the Option Key located under the displayed
menu option that you wish to select.
Scrolling
Use the key to scroll through the features in each mode.
The menu options appear in pairs with the exception of “Wait”
in Phone Mode.
Group Mode Menu Options
Private Mode Menu Options
Phone Mode Menu Options
MENU
AreaMailS OffSts
AlertPrgmAreaMail
AlertPrgm
r370
AlertMailAlertMail
AlphaPrgmAlphaPrgm
Sts
r370
r470
r470
Spd#Mail
ForwdAlpha
MemoPrgm
Wait
8
370/ r 470
GETTING STARTED
Group Call
GGGGrrrroooouuuupppp RRRReeeeaaaaddddyy
yy
PPPPlllluuuummmmbbbbeeeerrrrss
ss
AAAArrrreeeeaaaa MMMMaaaaiiiill
ll
GROUP CALL (r370)
A Group Call is an instant communication between you and
others in a selected talkgroup.
A talkgroup is a pre-defined set of individuals who share a
common communication need. Talkgroups appear on your display as names or numbers, e.g. Sales, Service, Electricians,
Talkgrp10.
MAKING A GROUP CALL
1. Press until “Group Ready” is displayed. This is the Group Call mode default
display.
Your active talkgroup is displayed, such as
Plumbers in this example.
2. To initiate the call to this talkgroup, press
and hold the PTT (Push to Talk) button.
Wait for the chirp sound and then speak into
the microphone.
3. Release the PTT to listen.
Mode
CHANGING TALKGROUPS
You may change talkgroups to reach talkgroups other than the
one that is active. Your portable can store up to 30 pre-defined
talkgroups.
1. From the Group Call mode, press or to select the
talkgroup. You can also select the talkgroup by the direct entry
method.
2. Press under “Ok”.
Group Call
3. Press the PTT to initiate the call.
r370/r470
GETTING STARTED
9
Group Call
RECEIVING A GROUP CALL
No action is necessary to receive a Group Call as long as your unit
is idle (not engaged in an active Phone or Private Call).
Any communication activity within the talkgroup you’ve selected
will cause your unit to automatically switch into Group Mode and
receive the transmission as long as your portable is powered on.
AREA SELECTION
When in Group mode, you may select to send your communication to only those talkgroup members in a specific location. This
is useful when you know where the individuals (that you wish to
reach) are located within the service area. Your unit can be programmed with up to 50 targeted areas. Targeted areas can be
aliased (named) for easy identification.
Group Call
1. Press until you see “Group Ready” on your display.
Additionally, for the r470, press until you see “Area”.
2. Press under “Area”.
3. Press or to scroll through the targeted areas specified
by your local service provider.You can also select the talkgroup by
the direct entry method.
Mode
MENU
4. Press under “Ok” to select the targeted area. The area
selected will appear on the last line of your display.
Your unit will remain in the area setting that you choose until you
change modes from Group Call to Private Call or Phone.
GROUP/PRIVATE SPEAKER
Your portable lets you choose to hear the audio through the
earpiece or the speaker in Group and Private modes. If the
Group/Private Speaker is set on, incoming audio will be heard
through the speaker. This is helpful in monitoring talkgroups.
If the Group/Private Speaker is set off, a brief alert tone will
notify you of activity within the talkgroup or Private Call.
Incoming audio will be heard through the earpiece.
Press (located on top of your unit) to turn the Group/Private
Speaker on or off.
10
r370/r470
GETTING STARTED
Private Call
PPPPrrrrvvvvtttt RRRReeeeaaaaddddyy
yy
AAAAlllleeeerrrrtttt MMMMaaaaiiiill
ll
PRIVATE CALL
A Private Call is a one-to-one communication between two
individuals instead of a talkgroup. Each unit is identified by a
name or number up to 5 digits in length.
MAKING A PRIVATE CALL
Direct Entry Method
1. Press until you see “Prvt Ready”
on your display. This is the Private Call
default display.
2. Enter the Private Call ID of the person
you want to reach using the alphanumeric
keys.
3. Press and hold the PTT (Push-To-Talk)
button, wait for the chirp and then speak
into the microphone.
Mode
Scroll Method
1. Press or to select the person with whom you want to
have a Private Call.
Private Call
2. Press and hold the PTT (Push-To-Talk) button and speak into
the microphone.
Alpha Method
1. Press the key until you see the “Alpha” menu option on
the last line of your display.
2. Press the key under “Alpha”.
3. Press the numeric key with the first letter of the name.
4. Press or to scroll through the list.
5. Press and hold the PTT (Push-To-Talk) button.
r370/r470
MENU
GETTING STARTED
11
Private Call
RECEIVING A PRIVATE CALL
You will hear a brief alert tone when you have an incoming
Private Call.
Your unit will automatically switch to Private Call mode and the
Private Call ID or name of the caller will be displayed.
Wait for the caller to finish speaking, then press and hold the
PTT. Begin speaking after you hear the chirp.
CALL ALERT
You can access Call Alert from the Group and Private modes. Call
Alert lets you privately page an individual by sending an audible
page.
Sending a Call Alert
1. Press until you see “Alert” on your display.
2. Press under ”Alert”.
3. Press or to scroll to the person to whom you want to
send the Call Alert. You may also select the person by using
Alpha Search or by entering the numeric ID.
4. Press the PTT to send the Call Alert.
Receiving a Call Alert
Private Call
When you receive a Call Alert, you will hear a recurring tone, and
see a message on your display.
1. Press the PTT to return the Call Alert.
2. Press under “Clear” to clear the Call Alert, or press any
key other than the PTT to silence the recurring tone, but keep
the alert on the display.
NOTE: Until the Call Alert is cleared or returned or the Mode key pressed,
you will be blocked from receiving any additional Phone, Group, or Private
Calls. Pressing any key other than the Mode key will only silence the tones.
MENU
12
r370/r470
GETTING STARTED
Private Call
PRIVATE CALL (RADIO ID) PROGRAMMING
You can add radio IDs to your Private Call list and store them
with names or aliases.
ABC
1. Press , , , and then press “Ok”.
2. Select the type of edit you want to perform:
ADD• To add a new entry press under “Ok”.
EDIT• To edit an existing number, press once
and then press under “Ok”.
ERASE • To erase an existing number, press twice
and then press under “Ok”.
3.Enter the radio ID (up to 5 digits) and press under
“Store”.
4. Enter the name or alias you want associated with this radio ID
and press under “Store”.
2
1
▲▲▲▲▲
Press the number key once for the first
letter associated with the key (2=A).
For the second letter of the key, press the
key twice (2=B).
For the third letter of the key, press the
number key three times (2=C).
For the number of the key, press the
number key four times (2=2). For keys with
four letters, press the key five times.
Press the scroll keys to move to the next or
previous letter.
Private Call
5. When you have entered all the new radio IDs that you want,
press under “Exit”.
6. Press under “Exit”.
r370/r470
GETTING STARTED
13
14
r370/r470
GETTING STARTED
Loading...
+ 42 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.