Motorola MOTO Q Getting Started Guide

Getting Started
Battery Installation
Battery life depends on the network, signal strength, display usage, accumulated data service usage, and accessories used.
1.
2.
3.
4.
2.
1.
b.
3. a.
4.
Getting Started
• To charge the phone, connect the phone’s power supply to the phone’s mini-USB port and plug into a wall outlet.
• New batteries are not fully charged
• Battery life depends on the network, signal strength, temperature, features, and accessories.
The phone will show Charge Complete when finished
The phone can charge via a mini USB cable from the phone to the computer USB port. However, charge times vary for each computer manufacture. Please contact the computer manufacture for the USB charge rate.
NOTE:
If battery has been completely drained, it can not charge via the USB cable plugged into the computer.
Memory Card
To Install Memory Card
• Open memory slot cover. Place finger nail on bottom ridge of infrared port and lift rubber cover from the memory slot.
• Insert memory card into exposed memory slot.
• Place memory card cover back in place and push to close.
NOTE:
If you install the memory card when the phone is turned on, you might have to turn the phone off and on again before you try to use the card. Do not remove the memory card while the phone is using or writing files on it.
Navigate
Right Soft key
Center Key ­Selects menu items
Left Soft Key
Phone
Make and
Answer Calls
(send key)
Turn on and off and End Calls
Back Key
Home Key
Alt Key
Message Key Space Key
Microphone
Caps Key
Enter Key
Camera Key
Voice Key
Undo/Back Key
Thumb Wheel
Opening Programs
• Press Start to access the list of programs the phone has to offer
Locking Phone
• Press and hold the Home key > Device lock
• Enter and confirm a password
• Press Done
Only numbers can be stored as a password
Locking Keypad
• Press and hold the Home key > Key lock
Thumb Wheel
• Use the thumb wheel to scroll through menu items and lists.
• Press the thumb wheel to select the highlighted items in a list or menu
Turning Phone On
• Press and hold the Power Key
O for 3-4 seconds to turn
phone on
NOTE:
Allow 40-50 seconds before the Home
Screen appears.
Turning Power Off
• Press and hold the End key for 3-4 seconds to turn phone off
Making a Call
• From the home screen, enter a phone number and press N to make a call
Answering a Call
• Press N to answer a call
• Press O to end the call
Setting Date and Time
• Press
Start > Settings > Clock and Alarm >
Date and Time
Basics
TIP
Loading...
+ 11 hidden pages