Motorola MBP43S, MBP43S-3, MBP43S-2, MBP43S-4, MBP41S User Manual

User’s Guide

Digital Video Baby Monitor

Models: MBP43S, MBP43S-2, MBP43S-3, MBP43S-4

The features described in this User’s Guide are subject to modifications without prior notice.

Welcome...

to your new Motorola Digital Video Baby Monitor!

Thank you for purchasing the Digital Video Baby Monitor. Now you can view
and hear your baby sleeping in another room or you can monitor your older
children in their play room.

Please retain your original dated sales receipt for your records. For
warranty service of your Motorola product, you will need to provide a copy
of your dated sales receipt to confirm warranty status. Registration is not
required for warranty coverage.

For product-related questions, please call:

This User's Guide provides you with all the information you need to get the
most from your product.

Before you use the Digital Video Baby Monitor, we recommend that you
insert and fully charge the battery in the Parent Unit, so that it continues to
work if you disconnect it from the mains power to carry it to another
location. Please read the Safety Instructions on pages 6 - 8 before you
install the units.

Got everything?

• 1 x Parent Unit

• 1 x Baby Unit (Camera)

• 1 x Rechargeable Ni-MH battery pack for the Parent Unit

• 1 x Power adapter for the Parent Unit

• 1 x Power adapter for the Baby Unit

In packs with multi Baby Units, you will find one or more additional Baby
Units with power adapters.

[phone] (UK only)

[phone] (ROI)

Overview of the Parent Unit

1. LCD display

2. Up Key +

Normal Mode: Tilt Up
Menu Mode: Up

3. Down Key -

Normal Mode: Tilt Down
Menu Mode: Down

4. Left Key <

Normal Mode: Pan Left
Menu Mode: Left

5. Right Key >

Normal Mode: Pan Right
Menu Mode: Right

6. Menu Key

M

Press to open the Menu options.

7. OK Key

O

8. Video ON/OFF Key V

Press to turn OFF the LCD display.
Press again to turn ON the LCD display.

9. Tal k K ey T

Press and hold to speak to your baby.

10. Power Adapter / Battery LED
BLUE when the adapter is powered on.
RED when battery is low.

11. Unit ON/OFF LED (Green)

12. Audio Level LED (Green, Orange, Red,

Red)

13. Microphone

14. Power Key P

Press and Hold to switch the unit ON/
OFF.

15. Antenna
Lift up the antenna for optimal reception.

16. Battery cover

17. Stand

18. Speaker

19. USB power adapter socket

110 11

12 14

6

7

8

9

16

17

15

19

18

2

3

4

5

13

Parent unit menu icons

Signal Level (4 Levels)

Night Vision Mode (Screen changes to Black/White)

T

Tal k Mode

Battery Level Control (4 Levels)

Pan Left

Pan Right

Tilt U p

Tilt D own

Volume Level Control (8 Levels)

Parent unit menu icons (cont’d)

Overview of the Baby Unit

Zoom Level Control (1X, 2X)

&

Brightness Level Control (8 Levels)

m

Lullaby Control (5 Song Selections)

Alarm Setting (6h, 4h, 2h, Off)

Temperature scale selection (ºC / ºF).
Readings display in BLUE, but turn RED if > 29 ºC / 84 ºF or
< 14 ºC / 57 ºF.
Displays HH ºC / ºF if > 36 ºC / 97 ºF.
Displays LL ºC / ºF if < 1 ºC / 34 ºF.

Cam Control (scan, view, add, delete)

View multiple cameras on screen (Picture in Picture). Available when
you have more than 1 Baby Unit (Camera).

V

Set Video On Timer (5min, 30min, 60min)

1

2

3

4

5

7

9

11

8

10

6

1. Photo Sensor (Night Vision Mode)

2. Camera Lens

3. Infrared LEDs

4. Power LEDs

5. Microphone

6. Speaker

7. ON/OFF Switch

8. Power Adapter Socket

9. Antenna

10. Tempe ra tu re Sen so r

11. Pair Key

Important guidelines for installing your Digital Video Baby Monitor

• To use your Baby Unit and Parent Unit together, you must be able to establish a radio
link between them, and the range will be affected by environmental conditions.

• Any large metal object, like a refrigerator, a mirror, a filing cabinet, a metallic door or
reinforced concrete, between the Baby Unit and Parent Unit may block the radio
signal.

• The signal strength may also be reduced by other solid structures, like walls, or by
radio or electrical equipment, such as TVs, computers, cordless or mobile phones,
fluorescent lights or dimmer switches.

• Use of other 2.4 GHz products, such as wireless networks (Wi-Fi® routers), Bluetooth®
systems, or microwave ovens, may cause interference with this product, so keep the
baby monitor at least 1.5 metres away from these types of products, or turn them off if
they appear to be causing interference.

•

If the signal is poor, try lifting up the Parent Unit Antenna, or moving the Parent Unit
and/or the Baby Unit to different positions in the rooms.

Table of contents 5

ENGLISH

Table of contents

1. Safety Instructions .................................................................................... 6

2. Getting Started ......................................................................................... 9

2.1 Baby Unit Power Supply............................................................................. 9

2.2 Parent Unit Battery Installation ...................................................................9

2.3 Parent Unit Power Supply .........................................................................10

2.4 Registration (Pairing) ................................................................................11

3. Using the Digital Video Baby Monitor ....................................................12

3.1 Setting up.................................................................................................. 12

3.2 Pan and Tilt ................................................................................................12

3.3 Night Vision Mode ....................................................................................12

3.4 Talk Mode................................................................................................. 12

3.5 Video ON/OFF .........................................................................................12

3.6 Temperature Display (HH °C / °F or LL °C / °F) .....................................12

4. Parent Unit Menu Options...................................................................... 13

4.1 Volume ......................................................................................................13

4.2 Brightness .................................................................................................13

4.3 Lullaby....................................................................................................... 13

4.4 Zoom .........................................................................................................13

4.5 Alarm......................................................................................................... 13

4.6 Camera Control ....................................................................................... 14

4.7 Temperature .............................................................................................15

4.8 Power Saving Mode .................................................................................15

5. Disposal of the Device (environment)................................................... 16

6. Cleaning ..................................................................................................17

7. Troubleshooting .....................................................................................18

8. General Information ............................................................................... 20

9. Technical Specifications .........................................................................25

6 Safety Instructions

1. Safety Instructions

WARNING:

Strangulation Hazard. Children have
STRANGLED in cords. Keep this cord out
of the reach of children (more than 1
metre) away). Never use extension cords
with AC Adapters. Only use the AC
Adapters provided.

Safety Instructions 7

ENGLISH

WARNING

This Digital Video Baby Monitor is compliant with all relevant standards
regarding electromagnetic fields and is, when handled as described in the
User's Guide, safe to use. Therefore, always read the instructions in this User's
Guide carefully before using the device.

• Adult assembly is required. Keep small parts away from children when
assembling.

• This product is not a toy. Do not allow children to play with it.

• This Digital Video Baby Monitor is not a substitute for responsible adult
supervision.

• Keep this user's guide for future reference.

• Keep the cords out of reach of children.

• Do not cover the Digital Video Baby Monitor with a towel or blanket.

• Test this monitor and all its functions so that you are familiar with it prior to
actual use.

• Do not use the Digital Video Baby Monitor in damp areas or close to water.

• Do not install the Digital Video Baby Monitor in extreme cold or heat, direct
sunlight, or close to a heat source.

• Only use the chargers and power adapters provided. Do not use other
chargers or power adapters as this may damage the device and battery
pack.

• Only insert a battery pack of the same type.

BABY UNIT SET UP & USE:

• Choose a location for the Baby Unit that will provide the best view of
your baby in his/her cot.

• Place the Baby Unit on a flat surface, such as a dresser, bureau or shelf,
or mount the Unit on a wall securely using the keyhole slots under the
stand.

• NEVER place the Baby Unit or cords within the cot.

• Do not place the Baby Unit or cords in the cot or within reach of the
baby (the unit and cords should be more than 1 metre away).

8 Safety Instructions

• Do not touch the plug contacts with sharp or metal objects.

• Connect the power adapters to easily accessible mains power.

CAUTION

There is a risk of explosion if the battery is replaced by an incorrect type.

Only use a Ni-MH rechargeable battery pack with rating: 3.6V, 900mAh.

Dispose of used batteries according to the instructions.

Getting Started 9

ENGLISH

2. Getting Started

2.1 Baby Unit Power Supply

1. Connect the DC plug of the power adapter to the DC jack at the bottom of

the Baby Unit and the other end to the mains power.

NOTE

Only use the supplied power adapter (5V DC / 1000mA).

2. Slide the ON/OFF switch to the ON position.
The power LED will light up in green.

3. Slide the ON/OFF switch to the OFF position to turn the Baby Unit off.

2.2 Parent Unit Battery Installation

1. Insert the wire tabs of the rechargeable battery pack into the contact slots

as shown above and fit the battery pack into the compartment.

2. Place the battery compartment cover over the battery, making sure that
the battery wires are carefully pushed down and the cover fits properly.

DC JACK

DC PLUG

DC Jack

DC Plug

Red

Black

10 Getting Started

3. Gently tighten the screw in a clockwise direction using a small cross head
or flat end screwdriver.

2.3 Parent Unit Power Supply

IMPORTANT

Installing the rechargeable battery pack and charging it fully before use is
recommended. This will allow the unit to operate on battery in the event of a
power failure.

1. Connect the small plug of the power adapter to the Parent Unit and the
other end to the mains power. Only use the supplied power adapter (5V
DC / 600mA) with the Micro USB plug.

2. Press and hold the

P POWER ON/OFF button for 1 second to switch

ON the Parent Unit.

3. Once the Baby and Parent Units are switched on, the display on the Parent
Unit will show the video captured by the Baby Unit.

4. If there is no connection or you are out of range, the video display will be
replaced by a symbol and the unit will beep every 5 seconds. Move the
Parent Unit closer to the Baby Unit until the link is re-established.

Small cross head or flat
end screwdriver

Micro USB Plug

Micro USB Socket

Getting Started 11

ENGLISH

5. To turn off the Parent Unit, press and hold the P POWER ON/OFF

button until the progress bar finishes scrolling.

NOTE

The battery icon turns RED and the unit emits a beep every 16 seconds to
indicate that the battery is low and needs to be recharged. The battery pack
takes about 12 hours to charge fully.

When charging

1.

During charging, the battery icon at the top right of the screen indicates that it is
charging. If the Parent Unit is powered off while charging, a power plug icon is
displayed for 5 seconds, followed by a battery icon for 45 seconds. The Blue LED
at the top left corner lights up to indicate that the power adapter is plugged in.

2.4 Registration (Pairing)

The Baby Unit is pre-registered to your Parent Unit. You do not need to register
it again unless the Baby Unit loses its link with the Parent Unit.

To re-register your Baby Unit, or register a new Baby Unit, follow the procedure
below:

1. Press the

M button of the Parent Unit and the menu bar will pop up.

2. Press the

< LEFT button or > RIGHT button until is highlighted.

The

menu will pop up.

3. Press the

+ UP button or - DOWN button to select , and press the

O button to confirm.

will pop up.

4. Press the

+ UP button or - DOWN button to select the desired Camera

and press the O button to start searching for a camera unit. The green
audio level LED will flash rapidly while searching.

5. Press the O button to confirm.

6. Press and hold the PAIR button underneath the Baby Unit until the Parent

Unit finds the camera, beeps and the video from the camera appears.

NOTE

If a particular Baby Unit was registered previously, registering this current Baby
Unit again will overwrite the old registration.

0

12 Using the Digital Video Baby Monitor

3. Using the Digital Video Baby Monitor

3.1 Setting up

• Place the Baby Unit in a convenient location (e.g. on a table) and point the

camera lens towards the area you want to monitor.

• Adjust the Baby Unit's camera angle by rotating the camera up, down, left

and right until you are satisfied with the image in the Parent Unit.

NOTE

Do not place the Baby Unit within baby's reach! If there is interference with the
picture or sound, try moving the units to different locations, and ensure that they
are not close to other electrical equipment.

3.2 Pan and Tilt

The camera can be remotely controlled from the Parent Unit.

1. Press the + UP button or - DOWN button to tilt upward or downward.

2. Press the < LEFT button or > RIGHT button to pan left or right.

3.3 Night Vision Mode

The Baby Unit has 8 high-intensity infrared LEDs for picking up clear images in
the dark. When the built-in photo sensor detects a low level of ambient light, the
LEDs will automatically activate and the screen on the Parent Unit will display in
black and white. The icon will be displayed at the top of the LCD screen.

3.4 Talk Mode

Press and hold the T TALK button on the Parent Unit to talk to your baby through
the Baby Unit's loudspeaker. The

T icon will be displayed at the top of the LCD

screen.

3.5 Video ON/OFF

Press the V VIDEO ON/OFF button to turn the LCD display on or off. The
audio monitor will remain On.

3.6 Temperature Display (HH °C / °F or LL °C / °F)

The temperature reading from the temperature sensor at the back of the
Baby Unit will be displayed at the top of the LCD screen. The readings will
turn RED if the temperature goes above 29ºC / 84ºF or below 14ºC / 57ºF.
The reading will change to HH °C / °F if the temperature goes above 36ºC
/ 97ºF. The reading will change to LL °C / °F and icon flashes in red if the
temperature goes below 1ºC / 34ºF.

Parent Unit Menu Options 13

ENGLISH

4. Parent Unit Menu Options

4.1 Volume

1. Press the M button.

The menu bar will pop up and is highlighted.

2. Press the

+ UP button or - DOWN button to select the desired volume

level from Level

0~8

. (The default Volume level setting is Level 4.)

4.2 Brightness

1. Press the M button and the menu bar will pop up.

2. Press the

< LEFT button or > RIGHT button until & is highlighted.

3. Press the

+ UP button or - DOWN button to select the desired brightness

level from Level

1

~ 8.(The default brightness level setting is Level 5.)

4.3 Lullaby

1. Press the M button and the menu bar will pop up.

2. Press the

< LEFT button or > RIGHT button until m is highlighted.

3. Press the

+ UP button or - DOWN button to select the desired song from

the 5 lullabies available, or the cycle option to play all 5 songs in turn. If an
individual song is selected it will only play once. (The default setting is

OFF.)

4. Press

O on the selected lullaby, and then press the + UP button or -

DOWN button to select the desired volume level.

4.4 Zoom

1. Press the M button and the menu bar will pop up.

2. Press the

< LEFT button or > RIGHT button until is highlighted.

3. Press the

+ UP button or - DOWN button to select 1X or 2X zoom. (The

default setting is 1X.)

4.5 Alarm

1. Press the M button and the menu bar will pop up.

2. Press the

< LEFT button or > RIGHT button until is highlighted.

3. Press the

+ UP button or - DOWN button to select the alarm time (6h, 4h,

2h). (The default setting is OFF.)

If an alarm time is selected, the Parent Unit will beep for about 45 seconds
after every 6, 4 or 2 hour period.

14 Parent Unit Menu Options

4.6 Camera Control

4.6.1 Add (pair) a camera

1. Press the M button and the menu bar will pop up.

2. Press the

< LEFT button or > RIGHT button until is highlighted.

The

menu will pop up.

3. Press the

+ UP button or - DOWN button to select , and press the O

button to confirm. will pop up.

4. Press the

+ UP button or - DOWN button to select the desired Camera,

and press the

O button to start searching for a camera unit. The green

audio level LED will flash rapidly while searching.

5. Press and hold the PAIR button underneath the Baby Unit until the Parent
Unit finds the camera, beeps and the picture from the camera appears.

NOTE

A camera can only be registered to one Parent Unit at any one time.

4.6.2 View a camera

1. Press the M button and the menu bar will pop up.

2. Press the

< LEFT button or > RIGHT button until is highlighted.

The menu will pop up.

3. Press the

+ UP button or - DOWN button to select , and press the O

button to confirm. will pop up.

4. Press the

+ UP button or - DOWN button to select desired Camera, and

press the O button to view the picture from that camera.

TIP

Quick Method to View Cameras.

Directly press

O

repeatedly to select

instead of entering the menu bar

.

4.6.3 Delete a camera

1. Press the M button and the menu bar will pop up.

2. Press the

< LEFT button or > RIGHT button until is highlighted.

The

menu will pop up.

3. Press the

+ UP button or - DOWN button to select , and press the O

button to confirm. will pop up.

4. Press the

+ UP button or - DOWN button to select the desired Camera,

and press the

O button to delete that registration.

Parent Unit Menu Options 15

ENGLISH

4.6.4 Scan camera

This function is only available when you have more than 1 Baby Unit (Camera).

1. Press the M button and the menu bar will pop up.

2. Press the

< LEFT button or > RIGHT button until is highlighted.

The

menu will pop up.

3. Press the

+ UP button or - DOWN button to select , and press the O

button to confirm.

4. The screen will then display images from the different registered cameras

in a loop of , changing about every 12 seconds.

TIP

Quick Method to View Cameras.

Directly press

O

repeatedly to select

instead of entering the menu bar

.

4.6.5 View multiple cameras on screen (Picture in Picture)

This function is only available when you have more than 1 Baby Unit (Camera). When
the

Picture in Picture

function is On, you can view multiple cameras on the screen.

1. Press the M button and the menu bar will pop up.

2. Press the

< LEFT button or > RIGHT button until is highlighted.

3. Press the

+ UP button or - DOWN button to select Picture in Picture On/

Off.

4. When the Picture in Picture function is On, you can press the

< LEFT

button/

> RIGHT button/+ UP button /- DOWN button to switch

between cameras.

4.7 Temperature

1. Press the M button and the menu bar will pop up.

2. Press the

< LEFT button or > RIGHT button until is highlighted.

3. Press the

+ UP button or - DOWN button to select ºC or ºF.

4.8 Power Saving Mode

1. Press the M button and the menu bar will pop up.

2. Press the

< LEFT button or > RIGHT button until V is highlighted.

3. Press the

+ UP button or - DOWN button to select auto video off after 5,

30 or 60 mins if it is not charging.

16 Disposal of the Device (environment)

5. Disposal of the Device (environment)

At the end of the product life cycle, you should not dispose of
this product with normal household waste. Take this product to
a collection point for the recycling of electrical and electronic
equipment. The symbol on the product, user's guide and/or
box indicates this.

Some of the product materials can be re-used if you take them
to a recycling point. By reusing some parts or raw materials from used products
you make an important contribution to the protection of the environment.

Please contact your local authorities in case you need more information on the
collection points in your area.

Dispose of the battery pack in an environmentally-friendly manner according to
your local regulations.

Cleaning 17

ENGLISH

6. Cleaning

Clean your Digital Video Baby Monitor with a slightly damp cloth or with an anti­static cloth. Never use cleaning agents or abrasive solvents.

Cleaning and care

• Do not clean any part of the Digital Video Baby Monitor with thinners or other

solvents and chemicals - this may cause permanent damage to the product
which is not covered by the warranty.

• Keep your Digital Video Baby Monitor away from hot, humid areas or strong

sunlight, and do not let it get wet.

• Every effort has been made to ensure high standards of reliability of your

Digital Video Baby Monitor. However, if something does go wrong, please
do not try to repair it yourself - contact Customer Service for assistance.

IMPORTANT

Always power off and disconnect the power adapter before cleaning your
Digital Video Baby Monitor.

18 Troubleshooting

7. Troubleshooting

Display

No display

• Try recharging or replacing the battery pack.

• Reset the units. Disconnect the battery pack of the Parent Unit and unplug

the power supply of both the units, then plug them back in.

• Is the unit turned on?

Press and hold the POWER ON/OFF button

P on the Parent Unit to turn

it ON.

• Is the correct camera selected?

Change the camera number, if necessary. See 4.6.2 View a camera.

• Is the video display turned on?

Press the VIDEO ON/OFF button

V to turn it on.

• When operating using batteries only, the display will go blank after 5, 30 or

60 minutes to save power (depending on the Video On/Off setting. See 3.5
Video ON/OFF). The unit will remain active and emit audio alerts. You can
reactivate the screen by pressing any button.

Registration

If the Baby Unit has lost its link with the Parent Unit

• Try recharging or replacing the battery pack.

• The Baby Unit may go out of range if it is too far away. Move the Baby Unit

closer to the Parent Unit.

• Reset the units by disconnecting them from the battery and power supply.

Wait for about 15 seconds before reconnecting. Allow up to one minute for
the Baby Unit and the Parent Unit to synchronize.

• See 2.4 Registration (Pairing), if there is a need to re-register the units.

Troubleshooting 19

ENGLISH

Interference

Noise interference on your Parent Unit

• Your Baby and Parent Units may be too close to each other. Move them

farther apart.

• Make sure that there is at least 1 to 2 metres between the 2 units to avoid

audio feedback.

• The Baby Unit may go out of range if it is too far away. Move the Baby Unit

closer to the Parent Unit.

• Make sure that the Baby and Parent Units are not near other electrical

equipment, such as a television, computer or cordless/mobile telephone.

• Use of other 2.4 GHz products, such as wireless networks (Wi-Fi

®

routers),

Bluetooth

®

systems, or microwave ovens, may cause interference with this
product, so keep the Digital Video Baby Monitor at least 1.5metres away
from these types of products, or turn them off if they appear to be causing
interference.

• If the signal is weak, try moving the Parent and/or Baby Unit to different
positions in the rooms.

20 General Information

8. General Information

If your product is not working properly...

1. Read this User's Guide or the Quick Start Guide.

2. Visit our website: www.motorola.com

3. Contact Customer Service at

To order a replacement battery pack for Parent Unit, contact customer service.

Consumer Products and Accessories Limited Warranty
("Warranty")

Thank you for purchasing this Motorola branded product manufactured under
license by Binatone Electronics International LTD ("BINATONE")

What Does this Warranty Cover?

Subject to the exclusions contained below, BINATONE warrants that this
Motorola branded product ("Product") or certified accessory ("Accessory") sold
for use with this product that it manufactured to be free from defects in materials
and workmanship under normal consumer usage for the period outlined below.
This Warranty is your exclusive warranty and is not transferable.

Who is covered?

This Warranty extends only to the first consumer purchaser, and is not
transferable.

What will BINATONE do?

BINATONE or its authorised distributor at its option and within a commercially
reasonable time, will at no charge repair or replace any Products or Accessories
that does not conform to this Warranty. We may use functionally equivalent
reconditioned/ refurbished/ pre-owned or new Products, Accessories or parts.

[phone] (UK only)

[phone] (ROI)

General Information 21

ENGLISH

What Other Limitations Are There?

ANY IMPLIED WARRANTIES, INCLUDING WITHOUT LIMITATION THE
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE, SHALL BE LIMITED TO THE DURATION OF THIS
LIMITED WARRANTY, OTHERWISE THE REPAIR OR REPLACEMENT
PROVIDED UNDER THIS EXPRESS LIMITED WARRANTY IS THE EXCLUSIVE
REMEDY OF THE CONSUMER, AND IS PROVIDED IN LIEU OF ALL OTHER
WARRANTIES, EXPRESS OR IMPLIED. IN NO EVENT SHALL MOTOROLA OR
BINATONE BE LIABLE, WHETHER IN CONTRACT OR TORT (INCLUDING
NEGLIGENCE) FOR DAMAGES IN EXCESS OF THE PURCHASE PRICE OF
THE PRODUCT OR ACCESSORY, OR FOR ANY INDIRECT, INCIDENTAL,
SPECIAL OR CONSEQUENTIAL DAMAGES OF ANY KIND, OR LOSS OF
REVENUE OR PROFITS, LOSS OF BUSINESS, LOSS OF INFORMATION OR
OTHER FINANCIAL LOSS ARISING OUT OF OR IN CONNECTION WITH THE
ABILITY OR INABILITY TO USE THE PRODUCTS OR ACCESSORIES TO THE
FULL EXTENT THESE DAMAGES MAY BE DISCLAIMED BY LAW.

Some jurisdictions do not allow the limitation or exclusion of incidental or
consequential damages, or limitation on the length of an implied warranty, so
the above limitations or exclusions may not apply to you. This Warranty gives
you specific legal rights, and you may also have other rights that vary from one
jurisdiction to another.

22 General Information

Exclusions

Normal Wear and Tear. Periodic maintenance, repair and replacement of parts

due to normal wear and tear are excluded from coverage.

Batteries. Only batteries whose fully charged capacity falls below 80% of their
rated capacity and batteries that leak are covered by this Warranty.

Abuse & Misuse. Defects or damage that result from: (a) improper operation,
storage, misuse or abuse, accident or neglect, such as physical damage (cracks,
scratches, etc.) to the surface of the product resulting from misuse; (b) contact
with liquid, water, rain, extreme humidity or heavy perspiration, sand, dirt or the
like, extreme heat, or food; (c) use of the Products or Accessories for
commercial purposes or subjecting the Product or Accessory to abnormal
usage or conditions; or (d) other acts which are not the fault of MOTOROLA or
BINATONE., are excluded from coverage.

Use of Non-Motorola branded Products and Accessories. Defects or damage
that result from the use of Non-Motorola branded or certified Products or
Accessories or other peripheral equipment are excluded from coverage.

Unauthorised Service or Modification. Defects or damages resulting from
service, testing, adjustment, installation, maintenance, alteration, or
modification in any way by someone other than MOTOROLA, BINATONE or its
authorised service centres, are excluded from coverage.

Products Covered Length of Coverage

Consumer Products One (1) year from the date of the

products original purchase by the first
consumer purchaser of the product.

Consumer Accessories Ninety (90) days from the date of the

accessories original purchase by the
first consumer purchaser of the
product.

Consumer Products and Accessories
that are Repaired or Replaced

The balance of the original warranty or
for Ninety (90) days from the date

returned to the consumer, whichever is
longer.

General Information 23

ENGLISH

Altered Products. Products or Accessories with (a) serial numbers or date tags

that have been removed, altered or obliterated; (b) broken seals or that show
evidence of tampering; (c) mismatched board serial numbers; or (d)
nonconforming or non-Motorola branded housings, or parts, are excluded from
coverage.

Communication Services. Defects, damages, or the failure of Products or
Accessories due to any communication service or signal you may subscribe to
or use with the Products or Accessories is excluded from coverage.

How to Obtain Warranty Service or Other Information?

To obtain service or information, please call:

You will receive instructions on how to ship the Products or Accessories at your
expense and risk, to a BINATONE Authorised Repair Centre.

To obtain service, you must include: (a) the Product or Accessory; (b) the
original proof of purchase (receipt) which includes the date, place and seller of
the Product; (c) if a warranty card was included in your box, a completed
warranty card showing the serial number of the Product; (d) a written
description of the problem; and, most importantly; (e) your address and
telephone number.

These terms and conditions constitute the complete warranty agreement
between you and BINATONE. regarding the Products or Accessories
purchased by you, and supersede any prior agreement or representations,
including representations made in any literature publications or promotional
materials issued by BINATONE. or representations made by any agent
employee or staff of BINATONE, that may have been made in connection with
the said purchase.

[phone] (UK only)

[phone] (ROI)

24 General Information

Radio Spectrum:

EN301489-1 V1.9.2:2011

EMC:

IEC60950-1/A12:2011

BINATONE TELECOM PLC

1 Apsley Way London NW2 7HF,United Kingdom.
Tel: [phone] Fax: [phone]

e-mail: [e-mail].u

k

________________________________________ .

EC Declaration of Conformity

We the manufacturer / Importer : Binatone Telecom Plc

1 Apsley Way London
NW2 7HF, United Kingdom.

Declare under our sole responsibility that the following product
Type of equipment:
Model Name:

Country of Origin:

China

Brand:

Motorola

complies with the essential protection requirements of R&TTE Directive 1999/5/EC on the
approximation of the laws of the Member States relating to Radio Spectrum Matters, the

Council Directive

/108/EC on the approximation of the laws of the Member States
relating to electromagnetic compatibility (EMC) and the European Community Directive
2006/95/EC relating to Electrical Safety. Directive 2011/65/EC on the restriction of use of
hazardous substances (RoHS) and 2009/125/EC relating to ecodesign requirement for
Energy-Related Products (ErP).

Assessment of compliance of the product with the requirements relating to the essential
requirements according to Article 3 R&TTE was based on Annex III of the Directive
1999/5/EC and the following standard:

Electrical Safety:

The product is labelled with the European Approval Marking CE as show. Any Unauthori

ed

modification of the product voids this Declarat

ion.

Manufacturer / Importer
(Signature of authori

ed person)

Karl Heinz Mueller / Chief Technical Officer Place & Date

RF Safety:

London, 20 March, 2015

Digital Video Baby Monitor
MBP43S, MBP43S-2, MBP43S-3, MBP43S-4

EN300328 V1.8.1:2012
EN301489-17 V2.2.1:2012

EN62311:2008

Technical Specifications 25

ENGLISH

9. Technical Specifications

Baby Unit

Frequency 2.4 GHz to 2.48 GHz

Image sensor Colour CMOS 0.3M Pixels

Lens f 2.5mm, F 2.8

IR LED 8 pcs

Power Adapter: Ten Pao International Ltd.

S006MB0500100; Input: AC100-240V,
50/60HZ 300mA; Output: DC5V, 1000mA

OR

Adapter: Kuantech Incorporated Company

KSAS0050500100VKD; Input: AC100-240V,

50/60Hz 300mA; Output: DC5V, 1000mA

WARNING

Use only the supplied power adapter.

26 Technical Specifications

Parent Unit

Specifications are subject to change without prior notice.

Frequency 2.4 GHz to 2.48 GHz

Display 3.5" diagonal TFT LCD

Display colour 16.7M colour LCD

Brightness control 8 steps

Volume control 8 steps

Power Adapter: Ten Pao International Ltd.

S003IB0500060; Input: AC100-240V,

50/60Hz 150mA; Output: DC5V, 600mA

OR

Adapter: ShenZhen Frecom Electronic Co., LTD

F05W-050060SPAB

Input: AC100-240V, 50/60Hz 150mA;

Output: DC5V, 600mA

WARNING

Use only the supplied power adapter.

Battery: GPI GPRHCH93C021 Ni-MH AAA 3.6V

900mAh rechargeable battery pack

OR

JUSTHIGH Ni-MH AAA 3.6V 900mAh rechargeable
battery pack

WARNING

Do not use non-rechargeable batteries for the Parent
Unit. Risk of explosion if battery is replaced by an
incorrect type. Dispose of used batteries according to
the instructions.

Manufactured, distributed or sold by
Binatone Electronics International LTD.,
official licensee for this product.
MOTOROLA and the Stylised M Logo,
are trademarks or registered trademarks
of Motorola Trademark Holdings, LLC.
and are used under license. All other
trademarks are the property of their
respective owners. © 2015 Motorola
Mobility LLC. All rights reserved.

UK_EN Version 3.0

Printed in China