The features described in user's guide are subject to
modifications without prior notice.
Welcome...
to your new Motorola Baby Monitor!
Thank you for purchasing the MBP36, MBP36/2, MBP36/3, MBP36/4,
MBP36P, MBP36P/2, MBP36P/3, MBP36P/4. Now you can see and
hear your baby sleeping in another room or you can monitor your
older children in their playroom.
Please retain your original dated sales receipt for your records. For
warranty service of your Motorola product, you will need to provide
a copy of your dated sales receipt to confirm warranty status.
Registration is not required for warranty coverage.
For product related questions, please call:
US and Canada 1-888-331-3383
On the Web: www.motorola.com
This User's Guide provides you with all the information you need
to get the most from your product.
Before you can use the baby monitor, we recommend you insert
and fully charge the battery in the parent unit, so that it continues
to work if you disconnect it from the power supply to carry it to
another location. Please read the Safety Instructions on page 6
before you install the units.
Got everything?
• Parent unit
• Camera unit(s)
• Rechargeable Ni-MH battery pack
• Power adapter for the Parent unit
• Power adapter(s) for the Camera unit
In multi-camera packs, you will find one or more additional
camera units with power adapter units.
Overview of the Parent Unit
10 1 12
11
2
3
4
5
13
1. Display (LCD screen)
2. Up Key
+
Normal Mode: Tilt Up
Menu Mode: Up
3. Down Key
-
Normal Mode: Tilt Down
Menu Mode: Down
4. Left Key
<
Normal Mode: Pan Left
Menu Mode: Left
5. Right Key
>
Normal Mode: Pan Right
Menu Mode: Right
6. Menu Key
M
Press to open the Menu options
7. OK Key O
8. Video ON/OFF Key
V
Press to turn OFF the LCD
display
Press again to turn ON the
LCD display
9. Tal k K e y
T
Press and hold to speak to
your baby
Parent unit menu icons
Signal Level (5 Levels)
1
Night Vision Mode (Screen changes to Black/White)
N
Talk Mo d e
T
B
Battery Level Control (4 Levels)
Pan Left
H
Pan Right
J
Tilt Up
K
Tilt Down
L
14
15
6
7
8
16
9
17
10. Power Adapter / Battery LED
BLUE when mains adapter
power on.
RED when battery low.
11. Unit ON/OFF LED (Green)
12. Audio Level LED (Green,
Orange, Red, Red)
13. Microphone
14. Power Key
P
Press and Hold to turn the unit
ON/OFF
15. Antenna
Lift the antenna for optimal
reception
16. Battery cover
17. Stand
18. Speaker
19. USB connector
Connection to AV output
* AV Cable (Optional accessory,
to be purchased separately)
20. Power Adapter connector
19
18
20
Parent unit menu icons (cont’d)
Volume Level Control (8 Levels)
*
Brightness Level Control (8 Levels)
&
Lullaby Control (5 Song Selections)
m
Zoom Level Control (1X, 2X)
Z
Alarm Setting (6h, 4h, 2h, OFF)
A
Cam Control (scan, view, add, del)
C
Temperature Reading (HH ºC / ºF or LL ºC / ºF)
Icon & readings turn RED > 29ºC / 84ºF, and reading display
HH ºC / ºF > 36ºC / 97 ºF)
Important guidelines for installing your Baby Monitor
• To use your Video Monitor Baby and Parent Unit together, you must
be able to establish a radio link between them, and the range will be
affected by environmental conditions.
• Any large metal object, like a refrigerator, a mirror, a filing cabinet,
metallic doors or reinforced concrete between the Baby and Parent
Unit may block the radio signal.
• The signal strength may also be reduced by other solid structures, like
walls, or by radio or electrical equipment, such as TVs, computers,
cordless or mobile phones, fluorescent lights or dimmer switches.
• Use of other 2.4GHz products, such as wireless networks (Wi-Fi
routers), Bluetooth
®
systems, or microwave ovens, may cause
interference with this product, so keep the baby monitor away at least
5ft (1.5m) from these types of products, or turn them off if they appear
be causing interference.
to
• If the signal is weak, try moving the Parent and/or the Baby Unit to
different positions in the rooms.
8. General Information ..................................................................... 19
ENGLISH
Table of contents5
1. Safety Instructions
WARNING:
STRANGULATION HAZARD - Keep the unit and adapter cord
more than 3 feet from the crib and out of baby's reach.
NEVER place camera or cords within the crib.
Secure the cord away from baby's reach.
Never use extension cords with AC Adapters. Only use the AC
Adapters provided.
CAMERA SET UP & USE:
● Determine a location for the CAMERA that will provide the best
view of your baby in his cot.
● Place the CAMERA on a flat surface, such as a dresser, bureau,
or shelf.
● NEVER place camera or cords within cot.
WARNING
This baby monitor is compliant with all relevant standards regarding
electromagnetic fields and is, when handled as described in the User's
Guide, safe to use. Therefore, always read the instructions in this User's
Guide carefully before using the device.
• Adult assembly is required. Keep small parts away from children when
assembling.
• This product is not a toy. Do not allow children to play with it.
• This baby monitor is not a substitute for responsible adult supervision.
• Keep this user's guide for future reference.
• Do not place the baby unit or cords in the crib or within reach of
the baby (the unit should be 3 feet away).
• Keep the cords out of reach of children.
• Do not cover the baby monitor with a towel or blanket.
more than 3 feet
and cords more than
6Safety Instructions
• Never use extension cords with power adapters. Only use the power
adapters provided.
• Test this monitor and all its functions so that you are familiar with it
prior to actual use.
• Do not use the baby monitor near water.
• Do not install the baby monitor near a heat source.
• Only use the chargers and power adapters provided. Do not use other
chargers or power adapters as this may damage the device and
battery pack.
• Only insert a battery pack of the same type.
• Do not touch the plug contacts with sharp or metal objects.
CAUTION
Risk of explosion if battery is replaced by an incorrect type.
Dispose of used batteries according to the instructions.
ENGLISH
Safety Instructions7
2. Getting Started
2.1Baby Unit Power Supply
1. Connect the small plug of the power adapter to the baby unit and the
other end to the electrical outlet.
NOTE
Only use the enclosed power adapter (5.9V DC / 1000mA).
2. Slide the ON/OFF switch to the ON position. The power LED will
light up in green.
3. Slide the ON/OFF switch to the OFF position to turn the Baby Unit off.
2.2Parent Unit Battery Installation
Black Red
1. Insert the wire tab of the rechargeable battery pack into the contact
slot as shown above and fit the battery pack into the compartment.
Small cross head or
Flat end screw driver
2. Replace the battery cover over the compartment and gently tighten
the screw in a clockwise direction using a Small cross head or Flat
end screw drivers.
8Getting Started
Loading...
+ 18 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.