Before using this product, read the Important Safety an
Take a moment before you get started to fa
Handsfree Headset. Along with your headse
storage and on-the-go remote charging.
H9
Get connected in 4 quick steps.
U BEGIN
Legal Information pamphlet and follow its instructions.
iliarize yourself with your new H9 Bluetooth
t, a portable charger base is provided for both
Volume
Buttons
Microphone
Call
Button
Indicator
Light
1
Your Headset's Battery
1
Plug Motorola power supply into charger port
on portable charger base. The Charger
Battery indicator light (-) turns on.
CHARGE
Earpiece
Speaker
Eartip
Headset
Battery
Indicator
Charger
Battery
Indicator
Charger
Plug
Note: If using a Dual Charging Adapter (sold separately),
plug the “Phone side” of cable into the charger base.
Insert headset snugly
2
into portable charger
base. The Headset
Battery indicator light
(+) turns on.
When headset's battery
is fully charged (about 3
hours), the Headset
Battery indicator light
turns off.
When headset is fully charged, proceed to
3
step 2. Do not remove the headset from
the charger base until step 3.
Note: Once the headset is fully charged, the charger
base will continue to charge. When fully charged (about
6.5 hours), the Charger Battery indicator light turns off.
2
START BLUETOOTH
FEATURE
Your Phone
3
PAIR
Your Headset
Your phone's Bluetooth feature is off by default.
To use your headset, you must turn on the
Bluetooth feature in your phone.
For most Motorola phones (at the main menu):
M
Press (
1
Menu) > Settings > Connection >
Bluetooth Link > Setup.
2
Scroll to Power.
3
Select Change.
Scroll to On.
4
5
Press Select to turn on the Bluetooth
feature. The Bluetooth feature remains on
until you turn the feature off.
Note: These steps are for most Motorola phones.
For other phones, see your phone's user's guide.
Before you can use your headset, you must pair
(link) it with your phone.
Step A - ENSURE HEADSET IS IN PAIRING
MODE
Power on headset by removing from charger
base. The indicator light flashes to initiate easy
pairing. After a few moments, the indicator
light will be steadily lit in blue to indicate
headset is in pairing mode.
Indicator Light
(steadily blue
for pairing mode)
If the headset does not enter pairing mode,
see TROUBLESHOOTING for help.
Motorola, Inc.
Consumer Advocacy Office
1307 East Algonquin Road
Schaumburg, IL 60196
www.hellomoto.com
1-877-MOTOBLU
1-888-390-6456 (TTY/TDD United States for
hearing impaired)
Guide Number: 6809510A99-O
MOTOROLA and the Stylized M Logo are registered in the US
Patent & Trademark Office. The use of wireless devices and their
accessories may be prohibited or restricted in certain areas.
Always obey the laws and regulations on the use of these
products. The Bluetooth trademarks are owned by their
proprietor and used by Motorola, Inc. under license. All other
product or service names are the property of their respective
owners.
3
Step B - SET YOUR PHONE TO LOOK FOR
YOUR HEADSET
For most Motorola phones:
On your Motorola phone, press (
1
PAIR
CONTINUED
Your Phone
M
Menu) >
Settings > Connection > Bluetooth Link >
Handsfree > Look for Devices.
The phone lists Bluetooth devices it finds.
Select Motorola H9.
2
Select OK or Ye s to pair your headset with
3
your phone.
4
Enter the passkey: 0000
Select OK.
5
When your headset successfully pairs and
connects with your phone, the indicator light
changes from steadily lit to flashing blue.
Note: These steps are for most Motorola phones.
For other phones, see your phone's user's guide.
4
TEST AND USE
USING YOUR
Your phone and headset are now paired and
ready to make and receive calls.
To make a call:
Place the headset in your ear. The eartip
1
should be inserted so that the headset feels
comfortable and forms a seal in the ear.
Note: See “Eartips and Your Headset” on the reverse
side of this guide for more information on using eartips
with your headset.
On the phone, dial the number you want to
2
call and press SEND key on your phone.
3
If your phone and headset are successfully
paired, you will hear ringing on the headset.
After you have successfully paired your
phone and headset, you don't need to
repeat these steps. For daily use, ensure
that your headset is turned ON and that
your phone's Bluetooth feature is ON.
PORTABLE CHARGER
BASE
The portable charger base provided with your
headset can be used to cordlessly recharge
your headset anywhere. Once charged, the
portable charger base provides power
on-the-go, extending your talk time by
constantly “topping off” your headset’s battery.
Using the included Motorola power supply, you
can charge both the portable charger base and
headset at the same time. The portable base
charger provides two indicator lights for
charging status. See “Indicator Lights” in the
reverse side of this guide for information on
these indicator lights.
Note: Using your PC’s USB port as a power source for
charging is not recommended.
USING YOUR H9
See
Features and
Functions Guide
on the reverse side
for information on
using your H9
TROUBLESHOOTING
My headset will not enter pairing mode.
Make sure that any devices previously paired with
the headset are turned off. If the indicator light is
not steadily lit in blue, turn off both the other
device and headset, wait 10 seconds, then turn
headset back on. Wait for the indicator light to
become steadily lit in blue, indicating the headset
is now in pairing mode.
My phone doesn't find my headset.
Make sure the indicator light on your headset is
on (lit in blue) and steady when your phone is
searching for devices (see step 3).
My headset worked before but now it's not
working.
Make sure your phone is on and the Bluetooth
feature is turned on in your phone (see step 2). If
the Bluetooth feature was turned off or was
turned on only temporarily, you may need to
restart the Bluetooth feature (see step 2) and pair
your phone and headset again (see step 3).
Support.
If you need more help, contact us at
1-877-MOTOBLU or visit us at
www.hellomoto.com/Bluetoothsupport
Features and
TURNING ON AND OFF
Functions Guide
H9
Bluetooth®
Handsfree Headset
IMPORTANT:
Be sure to first follow the
Quick Start Guide
on the reverse side
of this guide
to complete initial setup
To turn your headset on, press and hold
the Call button until the indicator light
flashes.
To turn your headset off, press and hold
the Call button until the indicator light
flashes rapidly and then turns off.
To conserve battery power, store your
headset in the included charger base.
Indicator
Light
Call
Button
of your H9.
EARTIPS AND YOUR
HEADSET
Your H9 headset is supplied with multiple
eartips. The eartip is fitted onto the end of your
headset’s earpiece speaker, and placed into
your ear when using your headset.
Flanged Tip
INSTALLING EARTIP
When installing an eartip, carefully place it onto
the tip of the earpiece speaker.
1
Pull back largest flange on eartip.
2
Twist eartip onto earpiece starting at an
angle and pushing onto headset.
Your headset’s performance is greatly
dependent upon achieving a good seal in your
ear. Therefore, we recommend trying all the
supplied eartips with your headset.
To verify you are using the proper eartip, you
can leave yourself a voicemail and check for
optimal ear seal to ensure good performance.
3
Pull flange back to wearing position.
WEARING HEADSET
CHANGING VOLUME
To wear your headset, insert the headset’s
earpiece speaker with installed eartip into your
ear. The eartip should form a comfortable seal
in your ear.
BUTTON ORIENTATION
You can also change the orientation of the
volume buttons on your headset.
Turn the headset power off.
1
2
Press both the Call button and Volume
button you want to assign as the
"volume up" button until the indicator
light flashes twice.
Volume
Buttons
Call
Button
Indicator
Light
European Union Directives
Conformance Statement
Hereby, Motorola declares that this
product is in compliance with:
• The essential requirements and
other relevant provisions of Directive
1999/5/EC.
• All other relevant EU Directives.
Product
Approval
Number
The above gives an example of a typical Product
Approval Number.
You can view your product’s Declaration of Conformity
(DoC) to Directive 1999/5/EC (to R&TTE Directive) at
www.motorola.com/rtte. To find your DoC, enter the
product Approval Number from your product’s label in
the “Search” bar on the web site.
MAKING CALLS
Function Action
Make a voice dial call Tap the Call button
and speak the name
after the tone
End a call Tap the Call button
Receive a call Tap the Call button
Reject a call Press and hold the
Call button until you
hear a medium beep
Redial last call Press and hold the
Call button until you
hear a medium beep
Answer a second Press and hold the
incoming call Call button until you
hear a medium beep
(places first call on
hold)
Note: Your H9 supports both Handsfree and Headset Profiles.
Accessing call functions depends upon which profile your
phone supports. See your phone's user's guide for more
information.
MAKING CALLS
CONTINUED
MAKING CALLS
CONTINUED
Function Action
Toggle between two Press and hold
active calls the Call button until
you hear a medium
beep
Join a 3-way call Press and hold
both Volume buttons
until you hear a
medium beep
Put an active call on Press and hold the
hold or resume a call Call button until you
on hold hear a medium beep
Transfer a call from the Tap the Call button
phone to the headset
Transfer a call from the Press and hold
headset to the phone the Call button until
you hear a low beep
Mute or unmute a call Tap both Volume
buttons
Note: Some features are phone/network dependent.
Function Action
Disable or enable the Press and hold
indicator light both Volume
buttons until you
hear a low beep
AUDIO TONES
The audio tones provide information about your
headset's status.
Audio Tone Headset Status
Single high tone when Volume at minimum
pressing Volume button or maximum
Five rapid high tones Low battery
repeated every 20 sec.
No audio indications; Out of range
deteriorating quality
Ring tone Incoming call
Single very high All calls ended
tone
AUDIO TONES
Audio Tone Headset Status
Single high tone Tapping Call button
or both Volume
buttons
Single medium tone Pressing Call button
or both Volume
buttons for 1-2 sec.
Single low tone Pressing and holding
Call button or both
Volume buttons for
greater than 2 secs.
Single high tone Phone network not
repeated every 5 sec. available
Two ascending tones Mute enabled
Two descending tones Mute disabled
Four ascending tones Headset powering
on
Four descending tones Headset powering
off
CONTINUED
INDICATOR LIGHTS
Indicator lights provide information about your
headset and charger base status.
Charger Base
Indicator Status
Charger Battery On Charging
( - ) Flashing Battery low
Off Charging complete
Headset Battery On Charging
( + ) Off Charging complete
Headset
Indicator Status
Off Power off
On (steady) Pairing mode
10 rapid flashes Pairing successful
Slow pulse Connected (on a call)
Quick flash Standby (not on call)
Note: After 5 minutes of inactivity, the light stops flashing to
conserve power, but the headset remains in standby mode.
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.