Motorola H780 User Manual

Page 1
motorola
H780
BEFORE YOU BEGIN
Before using this product, read the Important Safety and Legal Information pamphlet and follow its instructions.
Take a moment before you get started to familiarize yourself with your new H780 Headset.
Ear
Speaker
Quick Start Guide
1
Your Headset's Battery
Charge your headset's battery for 2 hours:
CHARGE
Call
Button
Microphone
2
Noise Cancellation Button
START BLUETOOTH
Volume
Buttons
Power
Switch
Indicator Light/ Microphone (on side)
FEATURE
Yo u r P h o n e
Your phone's Bluetooth feature is off by default. To use your headset, you must turn on the Bluetooth feature in your phone.
Plug the Motorola charger into the end of
1
the headset.
The indicator light turns red when the battery is charging. It may take up to 1 minute for the indicator light to turn on. When the headset's battery is fully charged (about 2 hours), the indicator light turns green.
Disconnect the charger.
2
Note: Headset is not functional while charging.
Note: This product uses a lithium ion, rechargeable, non-replaceable battery. Under normal use, the expected life of the rechargeable battery is approximately 400 charges.
For most Motorola phones (from home screen):
M
Press (
1
Menu) > Settings > Connection >
Bluetooth Link > Setup.
2
Scroll to Power.
3
Select Change.
Scroll to On.
4
5
Press Select to turn on the Bluetooth feature. The Bluetooth feature remains on until you turn it off.
Note: These steps are for most Motorola phones. For other phones, see your phone's user's guide.
Page 2
3
A
e
P
Your Heads
IR
t and Phone
Before you can use your headset, you must pair (link) it with your phone.
Step A - ENSURE HEADSET IS IN PAIRING MODE
Power on the headset by sliding Power switch to the On position. The indicator light first flashes during power up, then initiates pairing. After a few moments, the indicator light will be steadily lit in blue to indicate headset is in pairing mode.
Indicator Light (steady blue for pairing)
If the headset does not enter pairing mode, see TROUBLESHOOTING for help.
Step B - SET YOUR PHONE TO LOOK FOR YOUR HEADSET
For most Motorola phones:
M
On your Motorola phone, press (
1
Menu) > Settings > Connection > Bluetooth Link > Handsfree > Look for Devices.
The phone lists Bluetooth devices it finds.
Select Motorola H780.
2
Select OK or Ye s to pair your headset with
3
your phone. Enter the passkey: 0000
4
Select OK.
5
When your headset successfully pairs with your phone, the indicator light flashes purple and blue.
Note: These steps are for most Motorola phones. For other phones, see your phone's user's guide.
TROUBLESHOOTING
My headset will not enter pairing mode.
Make sure that any devices previously paired with the headset are turned off. If the indicator light is flashing in blue, first turn off the other device, then using the Power switch, turn the headset off and on. The indicator light becomes steadily lit in blue indicating the headset is now in pairing mode.
My phone doesn't find my headset.
Make sure the indicator light on your headset is on (lit in blue) and steady when your phone is searching for devices (see step 3).
My headset worked before but now it's not working.
Make sure your phone is on and the Bluetooth feature is turned on in your phone (see step 2). If the Bluetooth feature was turned off or was turned on only temporarily, you may need to restart the Bluetooth feature (see step 2) and pair your phone and headset again (see step 3).
My headset will not pair with my phone.
Turn the headset on by using the Power switch. Press the Call button and both Volume buttons for 5 seconds. The indicator light turns solid blue. The headset is now in pairing mode (see step 3B) to complete the pairing process.
Support.
If you need more help, contact us at 1-877-MOTOBLU or visit us at www.hellomoto.com/Bluetoothsupport
Motorola, Inc. Consumer Advocacy Office 1307 East Algonquin Road Schaumburg, IL 60196
www.motorola.com 1-877-MOTOBLU 1-888-390-6456 (TTY/TDD United States for hearing impaired)
Guide Number: 6809521A25-A
Blueto ot h Q D ID: B014226
MOTOROLA and the Stylized M Logo are registered in the US Patent & Trademark Office. The use of wireless devices and their accessories may be prohibited or restricted in certain areas. Always obey the laws and regulations on the use of these products. The Bluetooth trademarks are owned by their proprietor and used by Motorola, Inc. under license. All other product or service names are the property of their respective owners.
© 2008 Motorola, Inc. All rights reserved.
Page 3
4
e
TEST AND USE
USING A S
Your phone and headset are now paired and ready to make and receive calls. To confirm they are operating properly, make a call:
Place the headset over your ear.
1
On the phone, dial the number you want to
2
call and press SEND key on your phone.
If your phone and headset are successfully
3
paired, you will hear ringing on the headset.
After you have successfully paired your phone and headset, you don't need to repeat these steps. For daily use, ensure that your headset is turned ON and that your phone's Bluetooth feature is ON.
Multipoint technology allows you to make and receive calls from two Bluetooth enabled devices like your personal and business phones.
To pair a second phone to your headset, follow these steps:
Turn off any phones or devices that are
1
already paired with your headset. Turn off your headset by turning off the Power
2
switch. Perform Step 2 (“Start Bluetooth Feature”),
3
and Step 3 (”Pair”), and Step 4 (”Test and Use”) to pair your headset with your second phone.
To reconnect your headset with your first phone (and thus be connected to both phones), follow these steps:
Turn on first phone.
1
ECOND PHONE?
Use your first phone to connect to your
2
headset.
a
On your Motorola phone, press (Menu)
> Settings > Connection > Bluetooth Link > Audio Devices.
The phone lists Bluetooth devices it finds.
b
Select Motorola H780.
Select OK or Ye s .
c
Your headset is now connected to both phones. The last paired phone (your second phone) is now your primary phone for voice dial functionality.
After you have successfully paired both phones with your headset, you don't need to repeat these steps. For daily use, ensure that your headset is turned ON and that your phone's Bluetooth feature is ON.
M
TIPS FOR USING H780
WITH TWO PHONES
Use the following tips when using H780's multipoint technology:
Incoming calls can be answered from both phones:
– When answering a call, the idle phone is disconnected from the headset.
– When the call ends, the idle phone is automatically reconnected to the headset.
Last number redial dials the last outgoing call made from the primary phone.
Voice dial is accessible from your primary devic (last paired phone) by tapping the Call button and speaking the name after the tone.
If your headset does not automatically reconnect to both phones, turn the H780 off and on again to reconnect.
Page 4
USING YOUR H780
See
Features and
Functions Guide
on the reverse side
for information on
using your H780
Features and
Functions Guide
H780
Bluetooth®
Handsfree Headset
IMPORTANT:
Be sure to first follow the
Quick Start Guide
on the reverse side
of this guide
to complete initial setup
TURNING H780
ON AND OFF
To turn ON your H780, slide the Power switch
towards the indicator light. The indicator light first flashes blue for several seconds, then:
flashes blue (if paired and connected with another device).
becomes steadily blue (if ready to be paired).
To turn OFF your H780, slide the switch toward the charging plug (the orange color under the switch is displayed). The indicator light will turn off.
Power Switch
Indicator Light
of your H780.
Page 5
EAR CUSHIONS AND
WEARING THE
YOUR HEADSET
Your H780 headset is supplied with multiple ear cushions. Your headset’s performance is greatly dependent upon achieving a good fit on your ear. Therefore, we recommend trying all the supplied ear cushions with your headset.
The ear cushion is fitted onto the end of your headset’s earpiece speaker like shown, and placed onto your ear when using your headset.
HEADSET
To wear your headset, flex the earhook and loop it over your ear as shown.
Be sure to position the ear cushion into your ear canal for optimal audio performance and comfort.
CHANGING FOR USE
ON OTHER EAR
You can wear your H780 headset on your left or right ear. The headset comes ready for the right ear. To change the headset for the left ear:
Gently lift and pull the
1
top of the earhook up and off speaker stem, as shown.
Flip the headset over.
2
Attach the earhook to
3
the speaker stem, as shown.
QUICK BATTERY
CHECK
While turned on and not on a call, you can check your headset’s battery charge level by pressing and holding both Volume buttons.
Note: This feature does not work when headset is in pairing mode.
The indicator light displays charge status until you release the buttons.
Headset Indicator Available Talk Time
Red Less than 2 hours Yellow 2 to 4.5 hours Green Greater than 4.5
hours
Page 6
NOISE CANCELLATION
BUTTON
Your H780 headset has a noise cancellation button that enables you to hear the difference of dual-microphone noise cancellation.
European Union Directives
Conformance Statement
Hereby, Motorola declares that this product is in compliance with:
• The essential requirements and other relevant provisions of Directive 1999/5/EC.
• All other relevant EU Directives.
Product
Product
Approval
Approval
Number
Number
Noise
Cancellation
Button
Noise cancellation is always on each time a new call is received or placed. To turn the feature off (or back on), tap the Noise Cancellation button while in a call.
MAKING CALLS
Function Action
Make a voice dial call Tap the Call button (Primary phone) and speak the name after the tone
End a call Tap the Call button, and hear a high-to-low tone
Answer a call Tap the Call button, hear the ring tone, then a low-to-high tone
The above gives an example of a typical Product Approval Number.
You can view your product’s Declaration of Conformity (DoC) to Directive 1999/5/EC (to R&TTE Directive) at www.motorola.com/rtte. To find your DoC, enter the product Approval Number from your product’s label in the “Search” bar on the web site.
MAKING CALLS
CONTINUED
Function Action
Redial last call Press and hold the Call button until you hear a tone
Answer a second Press and hold the incoming call Call button (places first call on hold), and hear a tone
Reject second incoming Press and hold either call Volume button until you hear a tone
Reject a call Press and hold either Volume button until you hear a tone
Note: Some features are phone/network dependent.
Transfer a call from the Slide the power headset to the phone button to the OFF position
Mute or unmute a call Tap both Volume buttons until you hear a mute tone
Note: Your H780 supports both Handsfree and Headset Profiles. Accessing call functions depends upon which profile your phone supports. See your phone's user's guide for more information.
Page 7
AUDIO TONES
Audio Tone Headset Status
Ring tone Incoming call Short tone Phone network not
available High to low tone End call Two short tones when Volume at minimum
pressing Volume button or maximum during a call
Ascending tone Mute enabled Low tone Mute reminder
(repeated every 15 seconds)
Descending tone Mute disabled Low to high tone Connection
confirmation/voice activation
No audio indications; Out of range deteriorating quality
Two tones Low battery repeated every minute
INDICATOR LIGHT
With No Charger Plugged In
Headset Indicator Headset Status
Off Power off Three blue flashes Powering on/off Steady blue Pairing mode Quick blue/purple flashes Pairing successful Quick blue flash Incoming/outgoing call
on primary phone Quick purple flash Incoming/outgoing call
on secondary phone Slow blue pulse Connected (on a call) Slow blue flash Standby (phone
connected--not on a call)
Slow green flash Standby (two phones connected--not on a call)
Note: After 20 minutes on a call or of inactivity, the light stops flashing to conserve power, but the headset remains on.
Note: To disable the indicator light, press and hold both Volume buttons while turnng headset on.
INDICATOR LIGHT
With No Charger Plugged In
Headset Indicator Headset Status
Red flash Idle (not connected to phone)
Slow purple pulse Connected call muted
Quick red flash Low battery
Tip: Set your primary and secondary phones to different ringtones to know which phone is ringing when wearing the headset. See "Tips for using H780 with Two Phones" for more information.
CONTINUED
INDICATOR LIGHT
With the Charger Plugged In
Headset Indicator Headset Status
Red Battery level less than 50% charge
Yellow Battery level more than 50% charge
Green Charging complete
Loading...