Motorola H680 User Manual

motorola

DRAFT

Bluetooth

Handsfree Headset

BEFORE YOU BEGIN

Before using this product, read the Important Safety and Legal Information pamphlet and follow its instructions.

Take a moment before you get started to familiarize yourself with your new H680 Bluetooth Handsfree Headset. Along with your headset, a charger base is provided for both charging and storage.

Speaker

Volume Buttons

Charging Contacts (on reverse side)

Charger

Cover

Charging Contacts

Plug the Motorola charger into the port on the

charger base.

Place headset into charger base ensuring that charging contacts on the headset and charging base connect.

CHARGE

Your Headset's Battery

Charging Contacts

START BLUETOOTH

FEATURE

Your Phone

Your phone's Bluetooth feature is off by default. To use your headset, you must turn on the Bluetooth feature in your phone.

For most Motorola phones (at the main menu):

Press (

Bluetooth Link > Setup.

Scroll to Power.

Select Change.

Menu) > Settings > Connection >

Before you can use your headset, you must pair (link) it with your phone.

Step A - ENSURE HEADSET IS IN PAIRING MODE

Remove headset from charging base and power on by sliding Power switch to the On position (towards Power symbol on headset). The indicator light flashes to initiate easy pairing. After a few moments, the indicator light will be steadily lit in blue to indicate headset is in pairing mode.

PAIR

Your Headset

H680

Motorola, Inc. Consumer Advocacy Office 1307 East Algonquin Road Schaumburg, IL 60196

www.hellomoto.com 1-877-MOTOBLU 1-888-390-6456 (TTY/TDD United States for hearing impaired)

Guide Number: 6809510A87-O

MOTOROLA and the Stylized M Logo are registered in the US Patent & Trademark Office. The use of wireless devices and their accessories may be prohibited or restricted in certain areas. Always obey the laws and regulations on the use of these products. The Bluetooth trademarks are owned by their proprietor and used by Motorola, Inc. under license. All other product or service names are the property of their respective owners.

Get connected in 4 quick steps.

Power

Switch

Button

Step B - SET YOUR PHONE TO LOOK FOR YOUR HEADSET

For most Motorola phones:

On your Motorola phone, press (

Settings > Connection > Bluetooth L in k > Handsfree > Look for D ev ic es .

The phone lists Bluetooth devices it finds.

Select Motorola H680.

Select OK or Yes to pair your headset with

your phone.

Enter the passkey: 0000 Select OK.

When your headset successfully pairs and connects with your phone, the indicator light changes from steadily lit to flashing blue.

Note: These steps are for most Motorola phones. For other phones, see your phone's user's guide.

PAIR

Indicator

Call

Light

CONTINUED

Your Phone

Microphone

Menu) >

Charger

Port

Your phone and headset are now paired and ready to make and receive calls.

To make a call:

Place the headset over your ear. See

"Wearing the Headset" on the reverse side of this guide.

On the phone, dial the number you want to

call and press SEND key on your phone.

If your phone and headset are successfully paired, you will hear ringing on the headset.

After you have successfully paired your phone and headset, you don't need to repeat these steps. For daily use, ensure that your headset is turned ON and that your phone's Bluetooth feature is ON.

TEST AND USE

The indicator light turns red when the battery is charging. It may take up to 1 minute for the indicator light to turn on. When the headset's battery is fully charged (about 2 hours), the indicator light turns off.

Disconnect the charger.

Note: Headset is not functional while charging.

STORING YOUR

HEADSET

The charger base provided is used to charge and store your headset. When not using your headset, you should place it in the charger base.

As shown, the charger cover can be placed on top of the charger base, or underneath it to provide support for desktop placement.

Scroll to On.

Press Select to turn on the Bluetooth feature. The Bluetooth feature remains on until you turn the feature off.

Note: These steps are for most Motorola phones. For other phones, see your phone's user's guide.

USING YOUR H680

See

Features and

Functions Guide

on the reverse side

for information on

using your H680

Indicator Light (steadily blue for pairing mode)

If the headset does not enter pairing mode, see TROUBLESHOOTING for help.

TROUBLESHOOTING

My headset will not enter pairing mode.

Make sure that any devices previously paired with the headset are turned off. If the indicator light is not steadily lit in blue, turn off both the other device and headset, wait 10 seconds, then turn headset back on. Wait for the indicator light to become steadily lit in blue, indicating the headset is now in pairing mode.

My phone doesn't find my headset.

Make sure the indicator light on your headset is on (lit in blue) and steady when your phone is searching for devices (see step 3).

My headset worked before but now it's not working.

Make sure your phone is on and the Bluetooth feature is turned on in your phone (see step 2). If the Bluetooth feature was turned off or was turned on only temporarily, you may need to restart the Bluetooth feature (see step 2) and pair your phone and headset again (see step 3).

Support. If you need more help, contact us at 1-877-MOTOBLU or visit us at www.hellomoto.com/Bluetoothsupport