Motorola H680 User Manual

motorola

H680

Quick Start Guide

BEFORE YOU BEGIN

Before using this product, read the Important Safety and Legal Information pamphlet and follow its instructions.

Take a moment before you get started to familiarize yourself with your new H680 Bluetooth Handsfree Headset. Along with your headset, a charger case is provided for both charging and storage.

Speaker

Power

Switch

Call

Button

Volume Buttons

Indicator Light

Charging Contacts (on reverse side)

Microphone

Charger

Cover

Charger

Port

Charging Contacts

START HERE >

Important: Your headset must be turned off when charging. If you turned the headset on, see “Turning Headset On and Off” on reverse side for details on turning headset off.

Plug the Motorola charger into the port on the

charger case. Place headset into charger case ensuring that

charging contacts on the headset and charging case connect.

The indicator light turns red when the battery is charging. It may take up to 1 minute for the indicator light to turn on. When the headset's battery is fully charged (about 2.5 hours), the indicator light turns off.

Disconnect the charger.

Note: Headset is not functional while charging.

CHARGE

Your Headset's Battery

Charging

Contacts

START BLUETOOTH

FEATURE

Your Phone

Your phone's Bluetooth feature is off by default. To use your headset, you must turn on the Bluetooth feature in your phone.

For most Motorola phones (at the main menu):

Press (

Bluetooth Link > Setup.

Scroll to Power.

Select Change.

Scroll to On.

Press Select to turn on the Bluetooth feature. The Bluetooth feature remains on until you turn the feature off.

Note: These steps are for most Motorola phones. For other phones, see your phone's user's guide.

Menu) > Settings > Connection >

Before you can use your headset, you must pair (link) it with your phone.

Step A - ENSURE HEADSET IS IN PAIRING MODE

Remove headset from charging base and power on by sliding Power switch to the On position (towards Power symbol on headset). The indicator light flashes to initiate easy pairing. After a few moments, the indicator light will be steadily lit in blue to indicate headset is in pairing mode.

If the headset does not enter pairing mode, see TROUBLESHOOTING for help.

PAIR

Your Headset

Indicator Light (steadily blue for pairing mode)

Motorola, Inc. Consumer Advocacy Office 1307 East Algonquin Road Schaumburg, IL 60196

www.hellomoto.com 1-877-MOTOBLU 1-888-390-6456 (TTY/TDD United States for hearing impaired)

Guide Number: 6809510A87-O

Bluetooth ID: B012842

MOTOROLA and the Stylized M Logo are registered in the US Patent & Trademark Office. The use of wireless devices and their accessories may be prohibited or restricted in certain areas. Always obey the laws and regulations on the use of these products. The Bluetooth trademarks are owned by their proprietor and used by Motorola, Inc. under license. All other product or service names are the property of their respective owners.

Step B - SET YOUR PHONE TO LOOK FOR YOUR HEADSET

For most Motorola phones:

On your Motorola phone, press (

PAIR

CONTINUED

Your Phone

Menu) > Settings > Connection > Bluetooth L in k > Handsfree > Look for D ev ic es .

The phone lists Bluetooth devices it finds.

Select Motorola H680.

Select OK or Yes to pair your headset with

your phone.

Enter the passkey: 0000 Select OK.

When your headset successfully pairs and connects with your phone, the indicator light changes from steadily lit to flashing blue.

Note: These steps are for most Motorola phones. For other phones, see your phone's user's guide.

Your phone and headset are now paired and ready to make and receive calls.

To make a call:

Place the headset over your ear. See

"Wearing the Headset" on the reverse side of this guide.

On the phone, dial the number you want to

call and press SEND key on your phone.

If your phone and headset are successfully paired, you will hear ringing on the headset.

After you have successfully paired your phone and headset, you don't need to repeat these steps. For daily use, ensure that your headset is turned ON and that your phone's Bluetooth feature is ON.

TEST AND USE

USING YOUR H680

See

Features and

Functions Guide

on the reverse side

for information on

using your H680

TROUBLESHOOTING

My headset will not charge.

Make sure your headset is turned off when charging. Your headset will not charge in the charger case while powered on.

My headset will not enter pairing mode.

Make sure that any devices previously paired with the headset are turned off. If the indicator light is not steadily lit in blue, turn off both the other device and headset, wait 10 seconds, then turn headset back on. Wait for the indicator light to become steadily lit in blue, indicating the headset is now in pairing mode.

My phone doesn't find my headset.

Make sure the indicator light on your headset is on (lit in blue) and steady when your phone is searching for devices (see step 3).

My headset worked before but now it's not working.

Make sure your phone is on and the Bluetooth feature is turned on in your phone (see step 2). If the Bluetooth feature was turned off or was turned on only temporarily, you may need to restart the Bluetooth feature (see step 2) and pair your phone and headset again (see step 3).

Support. If you need more help, contact us at 1-877-MOTOBLU or visit us at www.hellomoto.com/Bluetoothsupport

Features and

Functions Guide

IMPORTANT:

Be sure to first follow the

Quick Start Guide

on the reverse side

of this guide

to complete initial setup

of your H680.

TURNING HEADSET ON

AND OFF

To turn your headset on, slide the Power

switch on (towards Power symbol on headset). The indicator light is steadily purple for several seconds, then flashes blue (if paired and connected with another device) or is steadily blue (if ready to be paired).

To turn your headset off, slide the Power switch off. The indicator light will turn off.

Indicator Light

Power

Switch

EARBUDS AND YOUR

HEADSET

Your H680 headset is supplied with multiple earbuds. The earbud is fitted onto the end of your headset’s earpiece speaker, and placed onto your ear when using your headset.

Your headset’s performance is greatly dependent upon achieving a good fit on your ear. Therefore, we recommend trying all the supplied earbuds with your headset.

WEARING THE

HEADSET

To wear your headset, flex the earhook and loop it over your ear as shown.

Be sure to position the ear bud into your ear canal for optimal audio performance and comfort.

CHANGING FOR USE

ON OTHER EAR

You can wear your H680 headset on your left or right ear. The headset comes ready for the right ear. To change the headset for the left ear:

Gently lift and pull the

top of the earhook up and off speaker stem as shown.

Flip the headset over.

Attach the earhook to

the speaker stem as shown.

STORING YOUR

HEADSET

The charger case provided is used to charge and store your headset. When not using your headset, you should place it in the charger base. Be sure to turn the headset off before placing it into the charger case.

As shown, the charger cover can be placed on top of the charger case, or underneath it to provide support for desktop placement.

European Union Directives Conformance

Statement

Hereby, Motorola declares that this product is in compliance with:

• The essential requirements and other relevant provisions of Directive 1999/5/EC.

• All other relevant EU Directives.

The above gives an example of a typical Product Approval Number.

You can view your product’s Declaration of Conformity (DoC) to Directive 1999/5/EC (to R&TTE Directive) at www.motorola.com/rtte. To find your DoC, enter the product Approval Number from your product’s label in the “Search” bar on the web site.

Product Approval Number

MAKING CALLS

Function Action

Receive a call Tap the Call button

Mute or unmute a call Tap both Volume buttons

Reject a call Press and hold a Volume button until you hear two descending tones

End a call Tap the Call button

Redial last call Press and hold the Call button until you hear two ascending tones

Make a voice dial call Tap the Call button and speak the name after the tone

Note: Your H680 supports both Handsfree and Headset Profiles. Accessing call functions depends upon which profile your phone supports. See your phone's user's guide for more information.

MAKING CALLS

Function Action

Answer a second Tap the Call button incoming call

Disable the First slide the switch indicator light toward charging plug (to turn headset off), then press and hold both Volume buttons AND slide the switch towards the microphone (to turn headset on)

Note: Some features are phone/network dependent.

CONTINUED

INDICATOR LIGHTS

With the Charger Plugged In

Headset Indicator Headset Status

Steady red Charging Off Charging complete

With No Charger Plugged In

Headset Indicator Headset Status

Off Power off Steady purple Powering up

Steady blue Pairing/connection mode

10 rapid purple flashes Connection successful Slow blue flash Standby (not on call) Quick blue flash Incoming call Slow blue pulse Connected (on a call)

Slow purple pulse Connected (on a muted call)

Red flash Idle (not connected) Quick red flash Low battery

Note: After 30 minutes of inactivity, the light stops flashing to conserve power, but the headset remains in standby mode.

AUDIO TONES

Audio Tone Headset Status

Ring tone Incoming call Single high tone Phone network not

available High to low tone End call Single high tone when Volume at minimum

pressing volume button or maximum Two ascending tones Mute enabled Two descending tones Mute disabled Low to high tone Connection

confirmation/voice activation

No audio indications; Out of range deteriorating quality

Two tones Low battery repeated every 30 sec.