Motorola CP125 User Manual

CP125

™

Portable Two-Way Radio User Guide
Guide de l'utilisateur de radio bidirectionnelle

COMPUTER SOFTWARE
COPYRIGHTS

The Motorola products described in this
manual may include copyrighted Motorola
computer programs stored in semiconductor
memories or other media. Laws in the United
States and other countries preserve for
Motorola certain exclusive rights for
copyrighted computer programs including, but
not limited to, the exclusive right to copy or
reproduce in any form the copyrighted
computer program. Accordingly, any
copyrighted Motorola computer programs
contained in the Motorola products descri bed
in this manual may not be copied, reproduced,
modified, reverse-engineered, or distributed in
any manner without the express written
permission of Motorola. Furthermore, the
purchase of Motorola products shall not be
deemed to grant either directly or by
implication, estoppel, or otherwise, any license
under the copyrights, patents or patent
applications of Motorola, except for the normal
non-exclusive license to use that arises by
operation of law in the sale of a product.

EnglishTOC.fm Page 0 Monday, August 22, 2005 1:47 PM

1

CONTENTS

CONTENTS

Computer Software Copyrights. . . inside cover

Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Product Safety and RF Exposure

Compliance. . . . . . . . . . . . . . . . . . . . . . . . . 3

Radio Overview. . . . . . . . . . . . . . . . . . . . . . 5

Accessory Information. . . . . . . . . . . . . . . . . . 6

Attach the Battery . . . . . . . . . . . . . . . . . . 6

Remove the Battery . . . . . . . . . . . . . . . . . 6

Attach the Antenna . . . . . . . . . . . . . . . . . 7

Remove the Antenna . . . . . . . . . . . . . . . . 7

Attach the Belt Clip . . . . . . . . . . . . . . . . . 8

Battery Information . . . . . . . . . . . . . . . . . . . . 9

Charging Your Battery . . . . . . . . . . . . . . . 9

Wall Charger. . . . . . . . . . . . . . . . . . . . . . . . 10

LED Indicators. . . . . . . . . . . . . . . . . . . . . . . 11

LCD Screen. . . . . . . . . . . . . . . . . . . . . . . . . 11

Programmable Buttons (A, B, C, D) . . . . . . 12

!"Buttons . . . . . . . . . . . . . . . . . . . . . . . 14

Monitor Button. . . . . . . . . . . . . . . . . . . . . . . 14

Getting Started . . . . . . . . . . . . . . . . . . . . . 15

Turn the Radio On or Off. . . . . . . . . . . . . . . 15

Adjust the Volume. . . . . . . . . . . . . . . . . . . . 15

Select a Channel . . . . . . . . . . . . . . . . . . . . .15

Receive a Call . . . . . . . . . . . . . . . . . . . . . . .15

Monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16

Transmit a Call . . . . . . . . . . . . . . . . . . . . . . .16

Scan. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17

Start and Stop Scan . . . . . . . . . . . . . . . . . . .18

Delete a Nuisance Channel/Talkgroup. . . . .18

Programming Mode . . . . . . . . . . . . . . . . . .19

Entering Programming Mode . . . . . . . . . . . .19

Exiting Programming Mode . . . . . . . . . . . . .19

Accessing Programming Mode Parameters.20

Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . .23

Limited Warranty . . . . . . . . . . . . . . . . . . . . .23

Accessories . . . . . . . . . . . . . . . . . . . . . . . .27

Antennas . . . . . . . . . . . . . . . . . . . . . . . . . . .27

Batteries . . . . . . . . . . . . . . . . . . . . . . . . . . . .27

Carry Accessories . . . . . . . . . . . . . . . . . . . .27

Chargers. . . . . . . . . . . . . . . . . . . . . . . . . . . .27

Audio Accessories . . . . . . . . . . . . . . . . . . . .28

EnglishTOC.fm Page 1 Monday, August 22, 2005 1:47 PM

2

CONTENTS

Notes:

EnglishTOC.fm Page 2 Monday, August 22, 2005 1:47 PM

3

SAFETY

SAFETY

PRODUCT SAFETY AND RF
EXPOSURE COMPLIANCE

ATTENTION!

This radio is restricted to occupat ional use
only to satisfy FCC RF energy exposure
requirements. Before using this product, r ea d

the RF energy awareness information and
operating instructions in the Product Safety
and RF Exposure booklet enclosed with your
radio (Motorola Publication part number
68P81095C98) to ensure compliance with RF
energy exposure limits.

For a list of Motorola-approved antennas,
batteries, and other accessories, visit the
following web site which lists approved
accessories: http://www.motorola.com/cgiss/
index.shtml.

Before using this product, read the
operating instructions for safe usage
contained in the Product Safety and
RF Exposure booklet enclosed with
your radio.

!

C a u t i o n

00_SafetyNA.fm Page 3 Monday, August 22, 2005 1:47 PM

4

SAFETY

Notes:

00_SafetyNA.fm Page 4 Monday, August 22, 2005 1:47 PM

5

RADIO OVERVIEW

RADIO OVERVIEW

A

B

C

D

!"

Monitor Button

Push-to-Talk

(PTT) Button

LED Indicator

On/Off/Volume

Knob

LCD Screen

Microphone

!" Buttons

Antenna

Speaker

Programmable
Buttons (A, B, C, D)

Accessory
Connector

Programming

Port

Belt
Clip

01_Overview.fm Page 5 Monday, August 22, 2005 1:52 PM

6

RADIO OVERVIEW

ACCESSORY INFORMATION

Attach the Battery Remove the Battery

Battery
Clasp

Grooves

Battery
Slots

1 Fit the battery slots with the grooves on the

radio.

2 Slide the battery upwards until a click is heard.

1 Turn off the radio if it is turned on.
2 Slide the battery clasp away from the radio.
3 Slide the battery downwards.
4 Pull the battery away from the radio.

01_Overview.fm Page 6 Monday, August 22, 2005 1:48 PM

7

RADIO OVERVIEW

Attach the Antenna Remove the Antenna

Antenna Connector

Threaded End
of Antenna

1 Fasten the antenna to the radio by placing the

threaded end of the antenna into the Antenna
Connector.

2 Rotate the antenna clockwise until tight.

1 Turn the antenna in a counter-clockwise

direction until it disengages from the radio.

01_Overview.fm Page 7 Monday, August 22, 2005 1:48 PM

8

RADIO OVERVIEW

Attach the Belt Clip Remove the Belt Clip

Release Tab

Mounting Grooves

1 Align mounting rails of the radio with the

grooves of the belt clip.

2 Slide the belt clip downwards until it clicks

into place.

1 Insert the end of a key between the release

tab and the back surface of the radio.

2 Lift the release tab.
3 Slide the belt clip upward to remove it.

01_Overview.fm Page 8 Monday, August 22, 2005 1:48 PM

9

RADIO OVERVIEW

BATTERY INFORMATION

Charging Your Battery

This radio is powered by a nickel-metal h ydride
(NiMH) rechargeable battery. Charge the
battery before use to ensure optimum capacity
and performance. The battery was designed
specifically to be used with a Motorola charger.
Charging in non-Motorola equipment may lead
to battery damage and void the battery
warranty.

Note: When charging a battery attached to a

radio, turn the radio off to ensure a full
charge.

The battery should be at about 77°F (25°C)
(room temperature), whenever possible.
Charging a cold battery (below 50° F [10°C])
may result in leakage of electrolyte and
ultimately in failure of the battery. Charging a
hot battery (above 95°F [35°C]) results in
reduced discharge capacity, affecting the
performance of the radio. Motorola rapid-rate
battery chargers contain a temperature­sensing circuit to ensure that batteries are
charged within the temperature limits stated
above.

If a battery is new, or its charge level is very
low, you will need to charge it before you can
use it.

Note: Batteries are shipped uncharged from

the factory. Always charge a new
battery 14 to 16 hours before initial
use.

01_Overview.fm Page 9 Monday, August 22, 2005 1:48 PM

10

RADIO OVERVIEW

WALL CHARGER

To Charge the Battery:

* Other charging solutions available through
Motorola Accessories (1-800-422-4210).

1 Turn off your radio, if it is turned on. It is

highly recommended that the radio be turned
off while charging.

2 Lift the dust cover to expose the audio

accessory connector.

3 Insert the charging connection of the charger

into the Programming Port.

4 Plug the charging adapter into an electrical

outlet.

5 The radio should be charged at least 16

hours initially before decreasing charging
time to 13 hours.

6 Turn on your radio, when charging is

complete; you should see all 3 bars of the
Battery Level Indicator illuminated.

Programming

Port

Dust Cover

01_Overview.fm Page 10 Monday, August 22, 2005 1:48 PM

11

RADIO OVERVIEW

LED INDICATORS

LCD SCREEN

Displays selected channel, programming
parameters, status messages and any erro r or
information messages.

LED

Color

State Indication

Red Illuminated Radio is transmitting.
Red Blinking Battery voltage is low.
Green Illuminated Radio is receiving.

Symbol Indication

L

Keypad Lock

The keypad has been locked.

J

Talkaround

Bypass the repeater and talk
directly to another radio.

Battery Level

Displays remaining charge in
battery based on how many
bars are displayed.

B

Power Level

Low Power “ R ” or High
Power “ S ” is activated.

C

Monitor

The selected channel is being
monitored

K

Programming

Mode

Radio is in Programming
Mode.

H

Scan

Blinks, without the dot, when
scan is activated. Illuminates
when there is some activity
on a non-priority channel.
Illuminates, with dot blinking,
indicates that there is some
activity on the priority
channel.

Signal Strength

The more bars, the stronger
the signal being received by
your radio.

Symbol Indication

01_Overview.fm Page 11 Monday, August 22, 2005 1:48 PM

12

RADIO OVERVIEW

PROGRAMMABLE BUTTONS (A, B, C, D)

Used to select various functions. These functions can be assigned as a short press (press and
release) or a long press (press and hold for 1 second).

Button Function

Channel Alias

1

1. Parameter values are preserved, even after the radio is turned off.

Toggles display between Channel Number and Channel Alias.
Backlight Toggles backlight display between On and Off.
Keypad Lock

1

Locks or unlocks all buttons except PTT , Monitor and On/Off/Volume Knob.
Nuisance Channel

Delete

Removes unwanted channel(s) temporarily from scan list during scan.

PL/DPL Enable

2

2. Turning off the radio or changing the channel restores this setting to the default value of the active channel.

Enables or disables radio from requiring matching PL/DPL to unsquelch.
Prime Channel Quick move to the pre-programmed “Prime” channel.
Power Select

1

Selects required power level: High or Low.
Scan

1

Starts or stops channel scan.
Squelch Level

1

Selects desired squelch level. Use the !" buttons to choose desired level (Level

0 will unsquelch radio unconditionally, whereas Level 15 will set tightest squelch).
Talkaround Enables or disables radio to transmit in Talkaround mode.
No Operation No function is programmed to this button.
Alert Tone Volume

1

Selects the alert tone volume needed for quiet operations or a noisy environment.

01_Overview.fm Page 12 Monday, August 22, 2005 1:48 PM

13

RADIO OVERVIEW

The default functions programmed to your radio are described in the table below.

Although your radio is programmed with default functions, you ha ve the ability to re-program the
radio’s programmable buttons. You may want to write down the new functions in the table below.

Press Type Button A Button B Button C Button D

Short Press Prime Channel Scan On/Off Power Select Backlight On/Off
Long Press Channel Alias Nuisance Channel

Delete

Squelch Level Kepad Lock

Press Type Button A Button B Button C Button D

Short Press
Long Press

01_Overview.fm Page 13 Monday, August 22, 2005 1:48 PM

14

RADIO OVERVIEW

!" BUTTONS

Used to:

• select a channel in Normal Mode

• select a parameter in Programming Mode

• change the scanning direction.

MONITOR BUTTON

Used to monitor the channel for any activity;
squelch is disabled.

01_Overview.fm Page 14 Monday, August 22, 2005 1:48 PM

15

GETTING STARTED

GETTING STARTED

TURN THE RADIO ON OR OFF

ADJUST THE VOLUME

Turn the On/Off/Volume Knob clockwise to
increase the volume, or counterclockwise to
decrease the volume.

SELECT A CHANNEL

Your radio offers 4 conventional channels.
To select a channel, press the

!or"buttons

until you reach the desired channel.

RECEIVE A CALL

ON OFF

Rotate the On/Off/
Volume Knob

clockwise.

Rotate the On/Off/
Vo lume Knob counter­clockwise until you hear a
click and both the display
and LED indicator turn off.

1 Turn your radio on.
2 Adjust the radio’s volume.
3 !or"to select the desired channel.

• Make sure the PTT button is released.

4 Listen for voice activity.

• The LED indicator lights green while your
radio is receiving.

5 To respond, hold the radio vertically 1 to 2

inches (2.5 to 5cm) from your mouth. Press
the PTT button to talk; release it to listen.

02_GetStarted.fm Page 15 Monday, August 22, 2005 1:48 PM

16

GETTING STARTED

MONITOR

It is important to monitor for traffic before
transmitting to ensure that you do not “talk
over” someone who is already transmitting.

TRANSMIT A CALL

1 Press and hold the Monitor button to access

channel traffic.

• If no activity is present, you will hear “white
noise.”

2 Once channel traffic has cleared, proceed

with your call by pressing the PTT button.

1 Turn your radio on.
2 !or"to select the desired channel.

Note: Monitor for traffic before transmitting

to ensure that you do not “talk over”
someone who is already transmitting

3 Hold the radio vertically 1 to 2 inches (2.5 to

5cm) from your mouth. Press the PTT button
to talk.

• The LED indicator lights steady red while
the radio is transmitting.

4 Release the PTT to listen.

02_GetStarted.fm Page 16 Monday, August 22, 2005 1:48 PM

17

SCAN

SCAN

Your radio is equipped with the Scan feature,
allows you to monitor multiple channels and
receive calls that are transmitted on them.

•The Gindicator appears on the LDC
screen while in scan mode.

Two types of scan are supported:

• Normal Scan – searches all channels
sequentially in the radio’s scan list.

• Priority Scan – allocates 50% of the scan­ning time to the Priority Channel (the first
channel in the designated scan list).

During scan, when activity is detected that
meets the unsquelch condition, the radio stops
scanning and switches to that channel; the
G indicator and the channel number are
displayed. When no activity is detected for a
pre-set time, the radio resumes scanning.

If your radio has switched to a non-priority
channel during Priority Scan, it still checks for
activity on the priority channel. If activity is
detected there, the radio switches to the
priority channel.

The radio transmits on the Prime Channel, if
the PTT button is pressed during scanning. If
the radio has stopped scanning, and has
changed to a particular channel, all transmit
and receive activity is performed on that
channel.

Ch. 2

Ch. 3

Ch. 4

Ch. 1

Home

Start

Normal Scan

Ch. 2

Ch. 1

Ch. 3

Ch. 1

Ch. 4

Ch. 1

Home

Start

Channel 1 Prioritized

04_Scan.fm Page 17 Monday, August 22, 2005 1:49 PM

18

SCAN

START AND STOP SCAN G

DELETE A NUISANCE CHANNEL/
TALKGROUP

A channel with unwanted activity is called a
Nuisance Channel. Y ou can temporarily dele te
a Nuisance Channel from the scan list.

To Remove a Nuisance Channel

To Restore the deleted channel(s)

Restart scan, or simply turn off your radio and
turn it on again.

1 Press the preprogrammed Scan button to

start scan.
Note: The G indicator blinks to indicate

that the radio is scanning. The LCD
Screen shows the Prime Channel
where the scan began.

2 Press the

!button to scan the channels in

incremental order, and the"button to scan in
the opposite order.

3 Press the preprogrmmed Scan button to stop

scanning.

1 While the radio is on the nuisance channel,

press the preprogrammed Nuisance

Channel Delete button until you hear a tone.

2 Release the Nuisance Channel Delete

button. The nuisance channel is deleted.
Note: You cannot temporarily delete a

Prime or Priority channel from the
scan list. If attempted, a low-pitched
tone is heard, and no action is taken.

04_Scan.fm Page 18 Monday, August 22, 2005 1:49 PM

19

PROGRAMMING

MODE

PROGRAMMING MODE

This mode allows you to change feature
parameters to enhance the use of your radio.

ENTERING PROGRAMMING MODE

EXITING PROGRAMMING MODE

Turn off the radio, to exit Programming Mode.

1 If your radio is turned on, turn it off.
2 Press and hold the preprogrammed Monitor

button, and turn on your radio.
Note: A ringing tone is heard, indicating that

your radio is in Programming Mode.
The K indicator illuminates and RW
is displayed.

05_Programming.fm Page 19 Monday, August 22, 2005 1:49 PM

20

PROGRAMMING

MODE

ACCESSING PROGRAMMING MODE PARAMETERS

Press the PTT button or the preprogramed Monitor button to scroll through the features available in
Programming Mode. Press the

!" buttons to scroll through the parameters for each feature.

Feature Range Remarks

Squelch Level
(SQL-XX)

SQL-00, …, SQL-15 Select low level when you need to receive very

weak
signal, and select high level when the
communications distance is near.

Time Out Timer
(TOT-XXX)

TOT-OFF, TOT-001, …, TOT-010 This determines the maximum duration (in

minutes) that you can transmit continuously.

Scan List 1
(SCANLST1)

1-01-XXX, …,
1-16-XXX,
XXX denotes channel number.

Up to 16 members per scan list. First member is
assigned as Priority Channel, if Priority Scan is
started. When scanning is started, only these 16
members will be scanned.

Battery Saver
(BS-XXXX)

BS-OFF,
BS-NORM,
BS-ENH

Battery Saver helps to extend your battery life.
When enabled, it turns off radio receiver circuitry
periodically when no activity is detected. BS­NORM (Normal) turns off the radio less
frequently; select this if you want to save battery,
but expect a Selective Call. BS-ENH (Enhanced)
turns off the receiver for a longer duration; select
this if you want to maximize battery saving and
do not expect to receive any Selective Call.

Battery Type
(BT-XXXX)

BT-NIMH,
BT-NICD,
BT-ALK

Selects the type of battery that your radio uses:
NIMH (Nickel Metal Hydride), NICD (Nickel
Cadmium) or ALK (Alkaline).

05_Programming.fm Page 20 Monday, August 22, 2005 1:49 PM

21

PROGRAMMING

MODE

Alert Tone Volume
(BEEP-X)

BEEP-OFF, BEEP-1,
BEEP-2,
BEEP-3

Selects the alert tone volume needed. Select
BEEP-OFF, if you require quiet operation, or
BEEP-3, if working in a noisy environment.

Prime Channel
Select
(PRM-XXX)

PRM-OFF, PRM-001, ….,
PRM-XXX,
XXX denotes the highest channel
number supported by your model.

The Prime Channel is the channel that you wish
to spend most of your time monitoring. The radio
will always switch back to the Prime Channel if it
is idle for more than the pre-programmed hang­time in other channel.

Backlight Select
(LGT-XXXX)

LGT-AUTO, LGT-TOGL Selecting LGT-TOGL makes the Backlight

button a toggle to control the ON/OFF status of
the LCD backlight. Selecting LGT-AUTO causes
the backlight to automatically extinguish, if there
is no keypress for more than 5 seconds. Pressing
the Backlight button prolongs illumination time.

Feature Range Remarks

05_Programming.fm Page 21 Monday, August 22, 2005 1:49 PM

22

PROGRAMMING

MODE

05_Programming.fm Page 22 Monday, August 22, 2005 1:49 PM

23

WARRANTY

WARRANTY

LIMITED WARRANTY

MOTOROLA COMMUNICATION

PRODUCTS

I. WHAT THIS WARRANTY COVERS AND

FOR HOW LONG:

MOTOROLA INC. (“MOTOROLA”) warrants the
MOTOROLA manufactured Communication
Products listed below (“Product”) against defects
in material and workmanship under normal use
and service for a period of time from the date of
purchase as scheduled below:

CP125 Portable Units One (1) Year

Product Accessories One (1) Year
MOTOROLA, at its option, will at no charge either

repair the Product (with new or reconditioned
parts), replace it (with a new or reconditioned
Product), or refund the purchase price of the
Product during the warranty period provided it is
returned in accordance with the terms of this
warranty . Replaced parts or boa rds are warranted
for the balance of the original applicable warranty

period. All replaced parts of Product shall be come
the property of MOTOROLA.

This express limited warranty is extended by

MOTOROLA to the original end user purchaser
only and is not assignable or transferable to any
other party . This is the complete warranty for the
Product manufactured by MOTOROLA.
MOTOROLA assumes no obligations or liability
for additions or modifications to this warranty
unless made in writing and signed by an officer
of MOTOROLA. Unless made in a separate
agreement between MOTOROLA and the
original end user purchaser, MOTOROLA does
not warrant the installation, maintenance or
service of the Product.

MOTOROLA cannot be responsible in any way

for any ancillary equipment not furnished by
MOTOROLA which is attached to or used in
connection with the Product, or for operation of
the Product with any ancillary equipment, and all
such equipment is expressly excluded from this
warranty. Because each system which may use
the Product is unique, MOTOROLA disclaims
liability for range, coverage, or operation of the
system as a whole under this warranty.

08_Warranty.fm Page 23 Monday, August 22, 2005 1:50 PM

24

WARRANTY

II. GENERAL PROVISIONS:

This warranty sets forth the full extent of
MOTOROLA'S responsibilities regarding the
Product. Repair, replacement or refund of the
purchase price, at MOTOROLA’s option, is the
exclusive remedy. THIS WARRANTY IS GIVEN
IN LIEU OF ALL OTHER EXPRESS
WARRANTIES. IMPLIED WARRANTIES,
INCLUDING WITHOUT LIMITATION, IMPLIED
WARRANTIES OF MERCHANTABILITY AND
FITNESS FOR A PAR TICULAR PURPOSE, ARE
LIMITED TO THE DURA TION OF THIS LIMITED
WARRANTY. IN NO EVENT SHALL
MOTOROLA BE LIABLE FOR DAMAGES IN
EXCESS OF THE PURCHASE PRICE OF THE
PRODUCT, FOR ANY LOSS OF USE, LOSS OF
TIME, INCONVENIENCE, COMMERCIAL
LOSS, LOST PROFITS OR SAVINGS OR
OTHER INCIDENTAL, SPECIAL OR
CONSEQUENTIAL DAMAGES ARISING OUT
OF THE USE OR INABILITY TO USE SUCH
PRODUCT, TO THE FULL EXTENT SUCH MAY
BE DISCLAIMED BY LAW.

III. STATE LAW RIGHTS:

SOME STATES DO NOT ALLOW THE

EXCLUSION OR LIMITATION OF INCIDENTAL

OR CONSEQUENTIAL DAMAGES OR
LIMITATION ON HOW LONG AN IMPLIED
WARRANTY LASTS, SO THE ABOVE
LIMITATION OR EXCLUSIONS MAY NOT
APPLY.

This warranty gives specific legal rights, and there
may be other rights which may vary from state to
state.

IV.HOW TO GET WARRANTY SERVICE:

You must provide proof of purchase (bearing the
date of purchase and Product item serial
number) in order to receive warranty service and,
also, deliver or send the Product item,
transportation and insurance prepaid, to an
authorized warranty service location. Warranty
service will be provided by MOTOROLA through
one of its authorized warranty service locations. If
you first contact the company which sold you the
Product (e.g., dealer or communication service
provider), it can facilitate your obtaining warranty
service. You can also call MOTOROLA at 1-800­927-2744 US/Canada.

08_Warranty.fm Page 24 Monday, August 22, 2005 1:50 PM

25

WARRANTY

V. WHAT THIS WARRANTY DOES NOT

COVER:

A) Defects or damage resulting from use of the

Product in other than its normal and
customary manner.

B) Defects or damage from misuse, accident,

water, or neglect.

C) Defects or damage from improper testing,

operation, maintenance, installation,
alteration, modification, or adjustment.

D) Breakage or damage to antennas unless

caused directly by defects in material
workmanship.

E) A Product subjected to unauthorized

Product modifications, disassembles or
repairs (including, without limitation, the
addition to the Product of non-MOTOROLA
supplied equipment) which adversely affect
performance of the Product or interfere with
MOTOROLA's normal warranty inspection
and testing of the Product to verify any
warranty claim.

F) Product which has had the serial number

removed or made illegible.

G) Rechargeable batteries if:

1) any of the seals on the battery
enclosure of cells are broken or show
evidence of tampering.

2) the damage or defect is caused by
charging or using the battery in
equipment or service other than the
Product for which it is specified.

H) Freight costs to the repair depot.
I) A Product which, due to illegal or

unauthorized alteration of the software/
firmware in the Product, does not function in
accordance with MOTOROLA’ s published
specifications or the FCC type acceptance
labeling in effect for the Product at the time
the Product was initially distributed from
MOTOROLA.

J) Scratches or other cosmetic damage to

Product surfaces that does not affect the
operation of the Product.

K) Normal and customary wear and tear.

VI.PATENT AND SOFTWARE PROVISIONS:

MOTOROLA will defend, at its own expense, any
suit brought against the end user purchaser to
the extent that it is based on a claim that the
Product or parts infringe a United States patent,
and MOTOROLA will pay those costs and
damages finally awarded against the end user
purchaser in any such suit which are attributable
to any such claim, but such defense and
payments are conditioned on the following:

08_Warranty.fm Page 25 Monday, August 22, 2005 1:50 PM

26

WARRANTY

A) that MOTOROLA will be notified promptly in

writing by such purchaser of any notice of
such claim;

B) that MOTOROLA will have sole control of the

defense of such suit and all negotiations for
its settlement or compromise; and

C) should the Product or parts become, or in

MOTOROLA’s opinion be likely to become,
the subject of a claim of infringement of a
United States patent, that such purchaser
will permit MOTOROLA, at its option and
expense, either to procure for such
purchaser the right to continue using the
Product or parts or to replace or modify the
same so that it becomes non-infringing or to
grant such purchaser a credit for the Product
or parts as depreciated and accept its return.
The depreciation will be an equal amount
per year over the lifetime of the Product or
parts as established by MOTOROLA.

MOTOROLA will have no liability with respect to
any claim of patent infringement which is based
upon the combination of the Product or parts
furnished hereunder with software, apparatus or
devices not furnished by MOTOROLA, nor will
MOTOROLA have any liability for the use of
ancillary equipment or software not furnished by
MOTOROLA which is attached to or used in
connection with the Product. The foregoing

states the entire liability of MOTOROLA with
respect to infringement of patents by the Product
or any parts thereof.

Laws in the United States and other countries
preserve for MOTOROLA certain exclusive rights
for copyrighted MOTOROLA software such as
the exclusive rights to reproduce in copies and
distribute copies of such MOTOROLA software.
MOTOROLA software may be used in only the
Product in which the software was originally
embodied and such software in such Product
may not be replaced, copied, distributed,
modified in any way, or used to produce any
derivative thereof. No other use including,
without limitation, alteration, modification,
reproduction, distribution, or reverse engineering
of such MOTOROLA software or exercise of
rights in such MOTOROLA software is permitted.
No license is granted by implication, estoppel or
otherwise under MOTOROLA patent rights or
copyrights.

VII.GOVERNING LAW:

This Warranty is governed by the laws of the
State of Illinois, USA.

08_Warranty.fm Page 26 Monday, August 22, 2005 1:50 PM

27

ACCESSORIES

ACCESSORIES

Motorola offers a number of accessories to
enhance the productivity of your two-way
radio. Many of the available accessories are
listed below.

ANTENNAS

BATTERIES

CARRY ACCESSORIES

CHARGERS

PMAD4012 136-155 MHz, Helical Antenna, 9cm
PMAD4013 155-174 MHz, Helical Antenna, 9cm
PMAE4011 435-480 MHz, Helical Antenna, 10cm
PMAD4014 136-155 MHz, Helical Antenna, 14cm
PMAD4027 136-155 MHz, Helical Antenna, 15cm
PMAD4028 148-174 MHz, Helical Antenna, 15cm
PMAD4015 155-174 MHz, Helical Antenna, 14cm
PMAE4003 430-470 MHz, Helical Antenna, 9cm
NAE6483 403-520 MHz, Whip Antenna
NAD6502 146-174 MHz, Heliflex Antnna

PMNN4063 NiMH, 1500 mAH

4285820Z01 Shoulder Strap
HLN9844 2-inch Belt Clip
RLN4815 Fanny Pack
4280384H01 Radio Pack Replacement Retaining

Strap w/Snap

4280384F89 Radio Pack Belt Lengthener for

RLN4815
HLN9985 Waterproof Bag
JMZN4020 Hand Strap for Radio

PMTN4087 Rapid Charger Kit, 120 V
PMTN4086 Rapid Charger Base
EPNN7994 Rapid Transformer, 120 V

09_Accessory.fm Page 27 Monday, August 22, 2005 1:50 PM

28

ACCESSORIES

AUDIO ACCESSORIES

RLN4940 Slow Desktop Charger Kit, 120 V
WPLN4203 Slow Desktop Charger Base
EPNN7997 Slow Desktop Transformer, 120 V
PMTN4073 Wall Charger, 120 V US NA

PMLN4294 Ear Set Mic w/PTT
PMLN4425 Ear Set Boom Mic w/Remote Ring

PTT
HMN9030 Remote Speaker Mic
HMN9013 Lightweight Handset w/Boom Mic

09_Accessory.fm Page 28 Monday, August 22, 2005 1:50 PM

6881098C60-O

*6881098C60*

MOTOROLA and the Stylized M Logo are registered in the
U.S. Patent and Trademark Office. All other product or
service names are the property of their respective owners.
© Motorola, Inc. 2005.

MOTOROLA et le logo stylisé M sont homologués au Patent
and Trademark Office des Etats-Unis. Tous les autres noms de
produits ou services appartiennent à leurs propriétaires respectifs.
© Motorola, Inc. 2005.