The Motorola products described in this manual may include
copyrighted Motorola and third-party software stored in
semiconductor memories or other media. Laws in the United States
and other countries preserve for Motorola and third-party software
providers certain exclusive rights for copyrighted software, such as
the exclusive rights to distribute or reproduce the copyrighted
software. Accordingly, any copyrighted software contained in the
Motorola products may not be modified, reverse-engineered,
distributed, or reproduced in any manner to the extent allowed by law.
Furthermore, the purchase of the Motorola products shall not be
deemed to grant either directly or by implication, estoppel, or
otherwise, any licence under the copyrights, patents, or patent
applications of Motorola or any third-party software provider, except
for the normal, non-exclusive, royalty-free licence to use that arises
by operation of law in the sale of a product.
While Products specifications and features may be subject to change
without notice, we are making every possible effort to ensure that
user manuals are updated on a regular basis to reflect product
functionality revisions. However, in the unlikely event that your
manual version does not fully reflect the core functionality of your
product, please let us know. You may also be able to access up-todate versions of our manuals in the consumer section of our Motorola
web site, at http://www.motorola.com.
2 - Welcome
Page 3
Contents
Safety and General Information . . . . . . . . . . . . . . . . . . . . . . . . .5
Caring for the Environment by Recycling. . . . . . . . . . . . . . . .12
IMPORTANT INFORMATION ON SAFE AND EFFICIENT
OPERATION. READ THIS INFORMATION BEFORE USING
YOUR PHONE.
The information provided in this document supersedes the general
safety information in user guides published prior to
December 1, 2002.
Exposure To Radio Frequency (RF) Energy
Your phone contains a transmitter and a receiver. When it is ON, it
receives and transmits RF energy. When you communicate with
your phone, the system handling your call controls the power level
at which your phone transmits.
Your Motorola phone is designed to comply with local regulatory
requirements in your country concerning exposure of human
beings to RF energy.
Operational Precautions
To assure optimal phone performance and make sure human
exposure to RF energy is within the guidelines set forth in the
relevant standards, always adhere to the following procedures.
External Antenna Care
Use only the supplied or Motorola-approved replacement antenna.
Unauthorised antennas, modifications, or attachments could
damage the phone.
Do NOT hold the external antenna when the phone is IN USE.
Holding the external antenna affects call quality and may cause the
phone to operate at a higher power level than needed. In addition,
use of unauthorised antennas may result in non-compliance with
the local regulatory requirements in your country.
Safety and General Information - 5
Page 6
Phone Operation
When placing or receiving a phone call, hold your phone as you
would a wireline telephone.
Body-Worn Operation
To maintain compliance with RF energy exposure guidelines, if you
wear a phone on your body when transmitting, always place the
phone in a Motorola-supplied or approved clip, holder, holster,
case, or body harness for this phone, if available. Use of
accessories not approved by Motorola may exceed RF energy
exposure guidelines. If you do not use one of the body-worn
accessories approved or supplied by Motorola, and are not using
the phone held in the normal use position, ensure the phone and its
antenna are at least 1 inch (2.5 centimetres) from your body when
transmitting.
Data Operation
When using any data feature of the phone, with or without an
accessory cable, position the phone and its antenna at least 1 inch
(2.5 centimetres) from your body.
Approved Accessories
Use of accessories not approved by Motorola, including but not
limited to batteries and antenna, may cause your phone to exceed
RF energy exposure guidelines. For a list of approved Motorola
accessories, visit our website at www.Motorola.com.
RF Energy Interference/Compatibility
Note: Nearly every electronic device is susceptible to RF energy
interference from external sources if inadequately shielded,
designed, or otherwise configured for RF energy compatibility. In
some circumstances your phone may cause interference.
6 - Safety and General Information
Page 7
Facilities
Turn off your phone in any facility where posted notices instruct you
to do so. These facilities may include hospitals or health care
facilities that may be using equipment that is sensitive to external
RF energy.
Aircraft
When instructed to do so, turn off your phone when on board an
aircraft. Any use of a phone must be in accordance with applicable
regulations per airline crew instructions.
Medical Devices
Pacemakers
Pacemaker manufacturers recommend that a minimum separation
of 6 inches (15 centimetres) be maintained between a handheld
wireless phone and a pacemaker.
Persons with pacemakers should:
• ALWAYS keep the phone more than 6 inches (15 centimetres)
from your pacemaker when the phone is turned ON.
• NOT carry the phone in the breast pocket.
• Use the ear opposite the pacemaker to minimise the potential
for interference.
• Turn OFF the phone immediately if you have any reason to
suspect that interference is taking place.
Hearing Aids
Some digital wireless phones may interfere with some hearing aids.
In the event of such interference, you may want to consult your
hearing aid manufacturer to discuss alternatives.
Other Medical Devices
If you use any other personal medical device, consult the
manufacturer of your device to determine if it is adequately
shielded from RF energy. Your GP may be able to assist you in
obtaining this information.
Safety and General Information - 7
Page 8
Use While Driving
Check the laws and regulations on the use of phones in the area
where you drive. Always obey them.
When using your phone while driving, please:
• Give full attention to driving and to the road.
• Use hands-free operation, if available.
• Pull off the road and park before making or answering a call if
driving conditions so require.
Operational Warnings
For Vehicles With an Air Bag
Do not place a phone in the area over an air bag or in the air bag
deployment area. Air bags inflate with great force. If a phone is
placed in the air bag deployment area and the air bag inflates, the
phone may be propelled with great force and cause serious injury
to occupants of the vehicle.
Potentially Explosive Atmospheres
Turn off your phone prior to entering any area with a potentially
explosive atmosphere, unless it is a phone type especially qualified
for use in such areas and certified as “Intrinsically Safe.” Do not
remove, install, or charge batteries in such areas. Sparks in a
potentially explosive atmosphere can cause an explosion or fire
resulting in bodily injury or even death.
Note: The areas with potentially explosive atmospheres referred to
above include fuelling areas such as below decks on boats, fuel or
chemical transfer or storage facilities, areas where the air contains
chemicals or particles, such as grain, dust, or metal powders.
Areas with potentially explosive atmospheres are often but not
always posted.
8 - Safety and General Information
Page 9
Blasting Caps and Areas
To avoid possible interference with blasting operations, turn OFF
your phone when you are near electrical blasting caps, in a blasting
area, or in areas posted “Turn off electronic devices.” Obey all
signs and instructions.
Batteries
Batteries can cause property damage and/or bodily injury such as
burns if a conductive material such as jewellery, keys, or beaded
chains touch exposed terminals. The conductive material may
complete an electrical circuit (short circuit) and become quite hot.
Exercise care in handling any charged battery, particularly when
placing it inside a pocket, bag, or other container with metal
objects. Use only Motorola original batteries and chargers.
Your battery or phone may contain symbols, defined as follows:
SymbolDefinition
Important safety information will follow.
Your battery or phone should not be disposed of in
a fire.
Your battery or phone may require recycling in
accordance with local laws. Contact your local
regulatory authorities for more information.
Your battery or phone should not be thrown in the
trash.
LiIon BATT
Your phone contains an internal lithium ion
battery.
Seizures/Blackouts
Some people may be susceptible to epileptic seizures or blackouts
when exposed to blinking lights, such as when watching television
Safety and General Information - 9
Page 10
or playing video games. These seizures or blackouts may occur
even if a person never had a previous seizure or blackout.
If you have experienced seizures or blackouts, or if you have a
family history of such occurrences, please consult with your doctor
before playing video games on your phone or enabling a blinkinglights feature on your phone. (The blinking-light feature is not
available on all products.)
Parents should monitor their children's use of video game or other
features that incorporate blinking lights on the phones. All persons
should discontinue use and consult a doctor if any of the following
symptoms occur: convulsion, eye or muscle twitching, loss of
awareness, involuntary movements, or disorientation.
To limit the likelihood of such symptoms, please take the following
safety precautions:
• Do not play or use a blinking-lights feature if you are tired or
need sleep.
• Take a minimum of a 15-minute break hourly.
• Play in a room in which all lights are on.
• Play at the farthest distance possible from the screen.
Repetitive Motion Injuries
When you play games on your phone, you may experience
occasional discomfort in your hands, arms, shoulders, neck, or
other parts of your body. Follow these instructions to avoid
problems such as tendonitis, carpal tunnel syndrome, or other
musculoskeletal disorders:
• Take a minimum 15-minute break every hour of game playing.
• If your hands, wrists, or arms become tired or sore while
playing, stop and rest for several hours before playing again.
• If you continue to have sore hands, wrists, or arms during or
after play, stop playing and see a doctor.
10 - Safety and General Information
Page 11
European Union Directives Conformance Statement
Hereby, Motorola declares that this product is in compliance with
• The essential requirements and other relevant
provisions of Directive 1999/5/EC
• All other relevant EU Directives
IMEI: 350034/40/394721/9
0168
Type: MC2-41H14
The above gives an example of a typical Product Approval Number.
You can view your product's Declaration of Conformity (DoC) to
Directive 1999/5/EC (the R&TTE Directive) at www.motorola.com/
rtte - to find your DoC, enter the product Approval Number from
your product's label in the "Search" bar on the Web site
Safety and General Information - 11
Product
Approval
Number
Page 12
Caring for the Environment by
Recycling
When you see this symbol on a Motorola product, do not
dispose the product with household waste.
Recycling Mobile Phones and
Accessories
Do not dispose of mobile phones or electrical accessories, such as
chargers or headsets, with your household waste. In some countries
or regions, collection systems are set up to handle electrical and
electronic waste items. Contact your regional authorities for more
details. If collection systems aren’t available, return unwanted
mobile phones or electrical accessories to any Motorola Approved
Service Centre in your region.
12
- Caring for the Environment by Recycling
Page 13
Main Menu
n
Phonebook
s
Recent Calls
• Received Calls
• Dialled Calls
• Notepad
• Call Times
•Data Times
•Data Volumes
e
Messages
• Create Message
• Message Inbox
•Voicemail
•Browser Msgs
• Info Services
• Quick Notes
• Outbox
• Drafts
• MMS Templates
É
Office Tools
• SIM Tool Kit Apps *
•Calculator
• Datebook
• Shortcuts
•Alarm Clock
•Chat
• Dialling Services
• Voice Dial
• Fixed Dial
•Quick Dial
Q
• Service Dial *
Games & Apps
Menu Map
á
Web Access
h
Multimedia
à
Bluetooth Link
w
Settings
* optional features
This is the standard main menu
layout. Menu organisation and
feature names may vary on
your phone. Not all features
may be available on your
phone.
•Browser
• Web Shortcuts
• Stored Pages
•History
• Go To URL
• Browser Setup
• Web Sessions
•Themes
•Pictures
• Sounds
• Videos *
• (see next page)
Menu Map - 13
Page 14
Settings Menu
l
Personalise
• Home Screen
• Main Menu
• Colour Style
•Greeting
• Wallpaper
• Screen Saver
• Quick Dial
t
Ring Styles
•Style
• style Detail
H
Call Divert
• Voice Calls
• Fax Calls
• Data Calls
• Cancel All
• Divert Status
U
In-Call Setup
•In-Call Timer
• My Caller ID
• Talk and Fax
• Answer Options
• Call Waiting
Z
Initial Setup
• Time and Date
•1-Touch Dial
• Display Timeout
• Backlight
•Scroll
• Language
• Contrast
•DTMF
•Master Reset
• Master Clear
m
Phone Status
•My Tel. Numbers
• Active Line
• Battery Meter
• Other Information
S
J
j
u
c
Headset
Network
Security
• Auto Answer
• Voice Dial
Car Settings
• Auto Answer
• Auto Handsfree
• Power-Off Delay
• Charger Time
• New Network
• Network Setup
• Available Networks
• My Network List
• Service Tone
• Call Drop Tone
• Phone Lock
• Lock Keypad
• Lock Application
•Fixed Dial
• Call Barring
• SIM PIN
• New Passwords
• Certificate Mgmt
Java Settings
• Java App Loader
• Java System
• Delete All Apps
• App Vibration
• App Volume
• App Priority
• App Backlight
• Set Standby App
• DNS IP
14 - Menu Map
Page 15
Getting Started
About This Guide
This guide describes the basic features of your Motorola wireless
phone.
Optional Features
This label identifies an optional network, SIM card, or
subscription-dependent feature that may not be offered
by all service providers in all geographical areas. Contact
your service provider for more information.
Optional Accessories
This label identifies a feature that requires an optional
Motorola Original™ accessory.
Installing the SIM Card
Your SIM (Subscriber Identity
Module) card contains your phone
number, service details, and
phonebook/message memory.
Caution: Do not bend or scratch
your SIM card. Avoid exposing your
SIM card to static electricity, water, or
dirt.
040075o
Getting Started - 15
Page 16
Battery Use
Battery performance depends on many factors, including your wireless
carrier’s network configuration; signal strength; the temperature at
which you operate your phone; the features and/or settings you select
and use; items attached to your phone’s accessory connector; and
your voice, data, and other application usage patterns.
Caution: To prevent injuries or burns, do not allow metal objects to
contact or short-circuit the battery terminals.
To maximise your battery’s performance:
• Always use Motorola Original batteries and battery chargers.
The phone warranty does not cover damage caused from
using non-Motorola batteries and/or battery chargers.
• New batteries or batteries that have been stored for a long
time may require a longer charge time.
• Maintain the battery at or near room temperature when charging.
• Do not expose batteries to temperatures below -10°C (14°F)
or above 45°C (113°F). Always take your phone with you
when you leave your vehicle.
• When you do not intend to use a battery for a while, store it
uncharged in a cool, dark, dry place, such as a refrigerator.
• Batteries gradually wear down and require longer charging
times. This is normal. If you charge your battery regularly and
notice a decrease in talk time or an increase in charging time,
then it is probably time to purchase a new battery.
The rechargeable batteries that power this phone must be
disposed of properly and may need to be recycled. Refer to
your battery’s label for battery type. Contact your local
recycling centre for proper disposal methods.
Warning: Never dispose of batteries in a fire because they may
explode.
16 - Getting Started
Page 17
Installing the Battery
Note: If necessary, remove the battery from its protective clear
plastic case.
Your phone is designed to use only Motorola Original
batteries and accessories. We recommend that you store
batteries in their protective cases when not in use.
1 Squeeze the sides of the front housing in the middle of the
"Motorola" logo as shown in the diagram;
2 Simultaneously press the release button on the top of the
phone with the thumb of your free hand;
3 While implementing Steps 1 and 2, pull the rear housing away
from the phone.
Getting Started - 17
Page 18
Charging the Battery
New batteries are shipped partially charged. Before you can use
your phone, you need to install and charge the battery as described
below. Some batteries perform best after several full charge/
discharge cycles.
Action
1 Plug the travel charger into the bottom
of your phone.
2 Plug the other end of the travel charger into the appropriate
electrical outlet.
3 When your phone indicates
Charge Complete, remove the travel
charger.
Tip: You can safely leave the travel charger connected to your
phone after charging is complete. This will not damage the battery.
040076o
18 - Getting Started
Page 19
Turning Your Phone On
Action
1 Press and hold O for 2
seconds to turn on the
phone.
040077o
2 If necessary, enter your SIM card PIN code and press
OK
(+) to unlock the SIM card.
Caution: If you enter an incorrect PIN code 3 times in a row, your
SIM card is disabled and your phone displays SIM Blocked.
3 If necessary, enter your 4-digit unlock code and press
OK
(+) to unlock the phone.
Adjusting Volume
Press the 5-way Navigation key
(S) left or right to increase or
decrease volume.
• increase or decrease earpiece
volume during a call
• increase or decrease the ringer volume setting when the home
screen is visible
Tip: At the lowest volume setting, press the key left once to
switch to vibrate alert. Press it again to switch to silent alert.
Press the key right to switch back to vibrate alert, then ring
alert.
• turn off an incoming call alert
Alternatively the volume can also be accessed by pressing menu
M >
Settings > Ring Styles.
040077o
Getting Started - 19
Page 20
Making a Call
PressTo
1 keypad keysdial the phone number
2 Nmake the call
3 Oend the call and “hang up” the phone
when you are finished
Alternatively access the Phonebook by pressing menu M
>
Phone Book > scroll through to required entry > Send N.
Answering a Call
When you receive a call, your phone rings and/or vibrates and
displays an incoming call message.
PressTo
1 N or
ANSWER (-)
2 Oend the call and “hang up” the phone
answer the call
when you are finished
Viewing Your Phone Number
To view your phone number from the home screen, press
M#.
While you are on a call, press M >
Note: Your phone number must be stored on your SIM card to use
this feature. To store your phone number on the SIM card, see
page 47. If you do not know your phone number, contact your
service provider.
My Tel. Numbers.
20 - Getting Started
Page 21
Highlight Features
You can do much more with your phone than make and receive
calls! This section describes some of your phone’s highlight
features.
Sending a Multimedia Message
A Multimedia Messaging Service (MMS) message
contains one or more slides with text and embedded
media objects (including pictures, animations, sounds,
voice records and/or video clips). You can send the
multimedia message to other wireless phone users, and
to email addresses.
Find the FeatureM >
PressTo
1 keypad keysenter slide text
Press M to open the
and insert a
Video, New Page, Quick Note, or
Contact Info.
2
OK (+)store the message
Messages > New Message
>
New Multimedia Msg
Picture, Voice Record, Sound,
MMS Menu
Highlight Features - 21
Page 22
PressTo
3 Sscroll to a Send To option:
• Highlight
[One Time Entry] to enter
one or more phone numbers
and/or email addresses.
• Highlight
[New Phonebook Entry] to
enter a number/address and
add it to the phonebook.
• Or highlight an existing
phonebook entry.
4
SELECT (+)select [One Time Entry] or
[New Phonebook Entry] and enter a
number/address. Press
DONE (-) when you are finished.
OK (+) or
or
ADD (+)add a phonebook entry to the list of
recipients. Press
DONE (-) when
you are finished.
5 Sscroll to
Subject
6 CHANGE (-)select Subject
7 keypad keysenter the subject
8
OK (+)store the subject
9
CHANGE (-)select Attachments
10 Sscroll to Picture, Sounds or Video
11 SELECT (+)select the file type
12 Shighlight the file you want
13
SELECT (+)attach the file
22 - Highlight Features
Page 23
PressTo
14
BACK (-)return to the message editor
15 Sscroll to
Receipt
16 CHANGE (-)select Receipt
17 ADD (+) or
REMOVE (+)
18
DONE (-)return to the message editor
19
SEND (+)
activate/deactivate the delivery
report
send the message
or
Msend the message, view message
details, save the message in the
drafts folder, or cancel the message
Receiving a Multimedia Message
When you receive an MMS message, your phone
displays the r (message waiting) indicator and a
New Message notification, and sounds an alert.
PressTo
READ (+)open the message
MMS messages that you receive can contain the following media
objects:
• Pictures, and animations are displayed as you read the message.
• A sound file or video clip begins playing when its slide is displayed.
Attached files are added to the end of the message. To open the
attachment, highlight the file indicator/filename and press
(image file type),
PLAY (+) (sound file or video clip), or OPEN (+)
(object such as phonebook or datebook entry, or unknown file type).
VIEW (+)
Highlight Features - 23
Page 24
Playing Video Clips
You can download video clips with the micro-browser, and send
and receive video clips in multimedia messages.
To play a video clip stored on your phone:
Find the FeatureM >
Multimedia > Videos
PressTo
1 Sscroll to the video clip
2
PLAY (+)start video clip playback
The video clip displays in the video clip playback screen.
Press S d to
032349a
pause or play the
video
BACK
Return to previous
VIDEO
AREA
Timer indicates %
played
PAUSE
Pause video clip
screen
Press M to open sub-menu
Note: Your phone may not have this feature enabled. Please
contact your Service Provider should you have any questions on
your particular model's capability with their network.
24 - Highlight Features
Page 25
Learning to Use Your Phone
See page 1 for a basic phone diagram.
Using the Display
The home screen displays when you are not on a call or using the
menu. You must be in the home screen to dial a phone number.
040078o
The H (menu) indicator indicates that you can press the menu key
(M) to enter the main menu.
Labels at the bottom corners of the display show the current soft
key functions. Press the left soft key (-) or right soft key (+)
to perform the function indicated by the left or right soft key label.
Your phone can display an analogue or digital clock in the home
screen (see page 67).
Learning to Use Your Phone - 25
Page 26
The following status indicators can display:
1. Signal Strength Indicator
Vertical bars show the strength of the network connection. You
cannot make or receive calls when the 0 (no signal) indicator or
0> (no transmit) indicator displays.
2. GPRS Indicator
Shows that your phone is using a high-speed General
Packet Radio Service (GPRS) network connection.
GPRS allows faster data transfer speeds. Indicators can
include:
Å = GPRS PDP context
active
26 - Learning to Use Your Phone
Ç = GPRS packet data
available
Page 27
3. Data Transmission Indicator
Shows connection and data transmission status. Indicators can
include:
4
= secure packet data
transfer
3
= secure application
connection
2
= secure Circuit Switch
7
= insecure packet data
transfer
6
= insecure application
connection
5
= insecure CSD call
Data (CSD) call
à
= Bluetooth® connection
4. Roam Indicator
Shows when your phone is seeking or using another
network outside your home network. Indicators can
include:
8
= 2.5G home
:
= 2G home
9
= 2.5G roam
;
= 2G roam
5. Active Line Indicator
Shows
@
or B to indicate the current active phone line.
Other indicators can include:
A
= line 1 active, call divert on
E
= alarm activated
C
= line 2 active, call divert on
Learning to Use Your Phone - 27
Page 28
6. Message Indicator
Displays when you receive a new message. Indicators
can include:
r
= text message
a
= active chat session
t
= voicemail message
s
= voicemail and text
message
When you enter a message, a number in this location shows the
number of characters left on the current page (text message), or
the message size (multimedia message).
7. Location Indicator
Your phone may be able to send location information to
the network during an emergency call. Indicators show
when your phone is sending location information:
Ö
= location on
Ñ
= location off
8. Ring Style Indicator
Shows the ring style setting.
y
= loud ring
|
= vibrate
{
= silent
28 - Learning to Use Your Phone
z
= soft ring
}
= vibrate and ring
Page 29
9. Battery Level Indicator
Vertical bars show the battery charge level. Recharge the battery
when
Low Battery displays and the battery alert sounds.
Using the 5-Way Navigation Key
Use the 5-way navigation key (S)
040077o
to scroll up, down, left, or right
through the menu system, highlight
menu items, change feature
settings, and play games. Press the
centre select button to select a
highlighted menu item.
Using Menus
From the home screen, press M to enter the main menu.
040081o
Learning to Use Your Phone - 29
Page 30
Press S to scroll to and highlight a menu feature icon in the main
menu. The following icons represent features that may appear in
the main menu, depending on your service provider and service
subscription options.
IconFeature IconFeature
Q
É
n
e
Games & Apps
Office Tools
Phonebook
Messages
h
w
á
s
Multimedia
Settings
Web Access
Recent Calls
Selecting a Menu Feature
To select a menu feature, starting from the home screen:
Find the FeatureM > Recent Calls > Dialled Calls
This example shows that from the home screen, you must press
M, scroll to and select
scroll to and select
soft keys to select the functions listed in the bottom left and right
corners of the display.
s
Recent Calls from the main menu, then
Dialled Calls. Press S to scroll, and the left/right
30 - Learning to Use Your Phone
Page 31
Selecting a Feature Option
Some features require you to select an option from a list:
Press S to scroll up or down to highlight the option you want.
• In a numbered list, press a number key to highlight the option.
• In an alphabetised list, press a key repeatedly to cycle through
the letters on the key and highlight the closest matching list
option.
When an option displays a list of possible values, press S left or
right to scroll through and select a value.
When an option displays a list of possible numeric values, press a
number key to set the value.
Learning to Use Your Phone - 31
Page 32
Entering Text
Some features require you to enter information.
040083o
The message centre lets you compose and send text messages. A
Character Counter indicates how many more characters will fit in a
message.
Character Counter
032356b
32 - Learning to Use Your Phone
Page 33
Choosing a Text Entry Mode
Multiple text entry modes make it easy for you to enter names,
numbers, and messages. The method (for example, iTAP
predictive text or TAP input mode) you select remains active until
you select another method.
Press # in any text entry screen to select one of the following
entry modes:
PrimaryThe primary text entry mode (see below to set).
NumericEnter numbers only (see page 39).
SymbolEnter symbols only (see page 39).
SecondaryThe secondary text entry mode (see below to set).
Alternatively, you can select a text entry mode in any text entry
screen by pressing M >
Tip: You can switch between text Entry Methods by pressing #
whilst in edit mode.
Setting Up a Text Entry Mode
Press M > Entry Setup from any text entry screen. Select
Primary Setup or Secondary Setup, and choose:
Entry Mode.
iTAPLet the phone predict each word as you
press keys (see page 37).
TapEnter letters and numbers by pressing a key
one or more times.
Tap ExtendedEnter letters, numbers, and symbols by
pressing a key one or more times.
NoneHide the Secondary setting (available only
for Secondary Setup).
Learning to Use Your Phone - 33
Page 34
Using Capitalisation
Press 0 in any text entry screen to change text case. The
following indicators show capitalisation status:
U
= no capital letters
T
= all capital letters
V
= capitalise next letter only
Text Entry Mode Indicators
When you select the Primary or Secondary text entry mode, the
following indicators identify the text entry setting:
PrimarySecondary Description
gm
hq
fl
jp
kn
io
Tap, no capital letters
Tap, capitalise next letter only
Tap, all capital letters
iTAP, no capital letters
iTAP, capitalise next letter only
iTAP, all capital letters
The following indicators identify
W
= numeric method
Numeric or Symbol entry mode:
[
= symbol method
Using Tap Method
This is the standard method for entering text on your phone.
Tap method cycles through the letters and number of the key you
press. Tap Extended method also cycles through additional
symbols as shown in the chart on page 36.
34 - Learning to Use Your Phone
Page 35
PressTo
1 A keypad key one or
select a letter, number, or symbol
more times
2 keypad keysenter remaining characters
Tip: Press S right to accept a word
completion, or * to insert a space.
3
OK (+)store the text
In a text entry screen, you can press # to switch entry modes. If
Tap or Tap Extended is not available as the Primary or Secondary entry
mode, see page 33.
When you enter text with
Tap or Tap Extended method, the soft key
functions change.
Learning to Use Your Phone - 35
Page 36
When you enter 3 or more characters in a row, your phone may
guess the rest of the word. For example, if you enter
prog you might
see:
If you want a different word (such as
progress), continue pressing
keypad keys to enter the remaining characters.
Character Chart
Use this chart as a guide for entering characters with Tap Extended method.
2a b c 2 á à â ã ç æ
3d e f 3 é è ê ë
4g h i 4 í î ï
5j k l 5
6m n o 6 ñ ó ò ô õ œ
7p q r s 7
8t u v 8 ú ù û ü
9w x y z 9
0change text case, for capital letters
36 - Learning to Use Your Phone
> < # §
Page 37
*enter a space (hold to enter a return)
#change text entry mode (hold for default)
Note: This chart may not reflect the exact character set available
on your phone. In an email address or URL editor, 1 first shows
common characters for that editor.
Tap Method Text Entry Rules
• Press a keypad key repeatedly to cycle through its characters.
• Press S left or right to move the flashing cursor to the left or
right in a text message.
• The first character of every sentence is capitalised. If
necessary, press S down to force the character to lowercase
before the cursor moves to the next position.
• If you enter or edit information and do not want to save the
changes, press O to exit without saving.
Using iTAP™ Method
iTAP™ software provides a predictive text entry mode that lets you
enter a word using one keypress per letter. This can be faster than
Tap method, because your phone combines the key presses into
common words.
Learning to Use Your Phone - 37
Page 38
For example, if you press 7764, letter combinations
that match your keypresses display:
If you want a different word (such as
Progress), continue pressing
keypad keys to enter the remaining characters.
Entering Words
In a text entry screen, you can press # to switch entry modes. An
indicator shows which method is active (see page 34). If
method is not available as the
Primary or Secondary entry mode, see
page 33.
PressTo
1 keypad keys (one
press per letter)
show possible letter combinations at
the bottom of the display
2 S left or right highlight the combination you want
38 - Learning to Use Your Phone
iTAP
Page 39
PressTo
SELECT (+)
3
or
*enter the highlighted combination
If you enter a word your phone does not recognise, the phone
stores it to use as one of your word options. When you fill memory
space for unrecognised words, your phone deletes the oldest
words to add new words.
lock a highlighted combination
You can press keypad keys to add
more letters to the end of the
combination.
when it spells a word
A space is automatically inserted
after the word.
Using Numeric Method
In a text entry screen, press # to switch entry modes until the W
(numeric) indicator displays.
Press keypad keys to enter the numbers you want. When you finish
entering numbers, press # to switch to another entry mode.
Using Symbol Method
In a text entry screen, press # to switch entry modes until the [
(symbol) indicator displays.
PressTo
1 keypad keys (one
press per symbol)
2 S left or right highlight the combination you want
show possible symbol combinations
at the bottom of the display
Learning to Use Your Phone - 39
Page 40
PressTo
SELECT (+)
3
lock a highlighted combination
You can press keypad keys to add
more symbols to the end of the
combination.
or
*enter the highlighted combination
Symbol Chart
Use this chart as a guide for entering characters with symbol
method.
2@ _ \ ß
3/ : ;
4" & '
5( ) [ ] { }
6¿ ¡ ~
7< > =
8$ £ ¥ ¤
9# % *
0+ - x * / = > < # §
*enter a space (hold to enter a return)
#change text entry mode (hold for default)
Note: This chart may not reflect the exact character set available
on your phone. In an email address or URL editor,
1
first shows
common characters for that editor.
40 - Learning to Use Your Phone
Page 41
Deleting Letters and Words
Place the cursor to the right of the text you want to delete, and then:
Action
Press
DELETE (-) to delete one letter at a time.
Hold
DELETE (-) to delete the entire message.
Using the Handsfree Speaker
When you activate your phone’s integrated handsfree speaker, you
can talk to the other party without holding the phone to your ear.
Press
SPEAKER (+) to turn the handsfree speaker on or off while
either dialling a call or during a call.
When you turn the handsfree speaker on, your phone displays
Speaker On in the home screen. The handsfree speaker remains on
until you press
Note: The handsfree speaker is disabled when you connect your
phone to a handsfree car kit or headset accessory.
SPEAKER (+) again or turn the phone off.
Changing a Code, PIN, or Password
Your phone’s 4-digit unlock code is originally set to 1234, and the
6-digit security code is originally set to 000000. Your service
provider may reset these codes before you receive your phone.
If your service provider has not reset these codes, we recommend
that you change them to prevent others from accessing your
personal information. The unlock code must contain 4 digits, and
the security code must contain 6 digits.
You can also reset your SIM card PIN code, PIN2 code, and/or call
barring password if necessary.
Learning to Use Your Phone - 41
Page 42
To change a code or password:
Find the FeatureM >
Settings > Security
>
New Passwords
Locking and Unlocking Your Phone
You can lock your phone manually or set the phone to lock
automatically whenever you turn it off.
To use a locked phone, you must enter the unlock code. A locked
phone still rings or vibrates for incoming calls or messages, but you
must unlock it to answer.
You can make emergency calls on your phone even when it is
locked (see page 54).
Locking Your Phone Manually
Find the FeatureM > Settings > Security > Phone Lock
PressTo
1 keypad keysenter your unlock code
2
OK (+)lock the phone
Unlocking Your Phone
Your phone’s unlock code is originally set to 1234. Your service
provider may reset the unlock code to the last 4 digits of your
phone number.
> Lock Now
42 - Learning to Use Your Phone
Page 43
At the Enter Unlock Code prompt:
PressTo
1 keypad keysenter your unlock code
2
OK (+)unlock your phone
Setting Your Phone to Lock Automatically
You can set your phone to lock every time you turn it off:
Find the FeatureM >
PressTo
1 keypad keysenter your unlock code
2
OK (+)activate automatic lock
Settings > Security > Phone Lock
> Automatic Lock > On
If You Forget a Code, PIN, or Password
Your phone’s 4-digit unlock code is originally set to 1234, and the 6digit security code is originally set to 000000. Your service provider
may reset the unlock code to the last 4 digits of your phone number
before you receive your phone.
If you forget your unlock code, try entering 1234 or the last 4 digits
of your phone number. If that does not work, at the
prompt:
PressTo
1 Mdisplay the unlock code bypass
2 keypad keysenter your security code
3
OK (+)submit your security code
screen
Learning to Use Your Phone - 43
Enter Unlock Code
Page 44
If you forget your security code, SIM card PIN code, PIN2 code, or
call barring password, contact your service provider.
Locking and Unlocking the Keypad
You can lock the keypad to prevent accidental key presses (for
example, when carrying your phone in a purse or pocket).
PressTo
M*lock or unlock the keypad
Note: Incoming calls and messages temporarily unlock the keypad.
Using the Phonebook
This section briefly describes basic phonebook operations. For
more information about using the phonebook, see page 64.
Shortcut: To open your phonebook from the home screen, press
S up or down.
Storing a Phone Number
Enter a phone number in the home screen, then press STORE (+)
to create a phonebook entry with that number. Fill in the other fields
to complete the entry.
Select
MORE to store another number (for example, a work number)
for the same Name.
Recording a Voice Name
Note: This option is not available for entries stored on the SIM
card.
44 - Learning to Use Your Phone
Page 45
When creating a phonebook entry, scroll to Voice Name and press
RECORD (+). When you are ready, press RECORD (+) again and
say the entry’s name (within 2 seconds). When prompted, press
RECORD (+) and repeat the name. Press DONE (-) to store the
voice name.
Storing a Picture for Caller ID
Note: This option is not available for entries stored on the SIM
card.
You can store a picture for a phonebook entry. The picture displays
when you receive calls from the entry.
When creating a phonebook entry, scroll to
CHANGE (+). Press S to select a picture, and press SELECT (+)
Picture and press
to store it for the entry.
Dialling a Number
Press M > Phonebook > entry to call N.
Note: You can also access the Phonebook from idle display by
pressing
Tip: To quickly highlight entries in your
are sorted by Speed No., press an entry’s speed number to highlight it.
For example, press 15 for entry number 15. If your entries
are sorted by
entry’s name to highlight it. For example, press 55 for the
first entry that starts with “K”.
S
, depending on local settings.
Phonebook list: If your entries
Name, Voice Name, or Email, enter the first letter of the
Learning to Use Your Phone - 45
Page 46
Voice Dialling a Number
Press M > Office Tools, press Dialling Services > Voice Dial, and say
the entry’s name (within 2 seconds).
Tip: To create a shortcut to
M >
M. Your phone prompts you to save the shortcut. To use a shortcut, press M and the shortcut key number.
Office Tools > Dialling Services, scroll to Voice Dial, and hold the
Voice Dial, press
Sorting Phonebook Entries
Press M > Phonebook, press M > Setup > Sort by, then select
whether you want to sort the phonebook list by
Voice Name, or Email.
When sorting by name, you can view
number for each name. To set the primary number for a name, see
page 65.
All numbers or just the Primary
Name, Speed No.,
Viewing Entries By Category
Press M > Phonebook, press M > Categories, then select
whether you want to view All entries, entries in a predefined
category (
created.
To set the category for a phonebook entry, see page 65.
Business, Personal, General, VIPs), or entries in a category you
46 - Learning to Use Your Phone
Page 47
Setting Up Your Phone
Storing Your Name and Phone Number
To store or edit your name and phone number information
on your SIM card:
Find the FeatureM >
Shortcut: Press M# from the home screen to edit your
name and phone number.
If you do not know your phone number, contact your service
provider.
Settings > Phone Status
>
My Tel. Numbers
Setting the Time and Date
Your phone uses the time and date for the Datebook. Your phone can
synchronise its time and date with the network:
Find the FeatureM > Settings > Initial Setup
To set the time and date manually, set
the
Time and Date options:
Find the FeatureM > Settings > Initial Setup
> Time and Date > Autoupdate > On
Autoupdate to Off and then set
>
Time and Date > Time or Date
Setting Up Your Phone - 47
Page 48
Setting a Ring Style
Your phone rings or vibrates to notify you of an incoming call or
other event. This ring or vibration is called an alert.
You can select one of five different ring styles. The ring style
indicator in the display shows the current ring style (see page 28).
To set a ring style:
Find the FeatureM >
PressTo
1 Sscroll to the ring style
2
SELECT (+)select the ring style
Each ring style contains settings for specific event alerts, ringer ID,
and ringer and keypad volume. To change these settings, press
M >
Shortcut: To change your ring volume from the home screen,
press S left or right.
Settings > Ring Styles >styleDetail.
Settings > Ring Styles > Style
Setting a Wallpaper Image
You can set a picture or animation as a wallpaper (background)
image in your phone’s home screen. The wallpaper image appears
as a faint watermark in text and menu displays.
Find the FeatureM >
PressTo
1 Sscroll to
2 CHANGE (+)open the picture viewer
48 - Setting Up Your Phone
Settings > Personalise > Wallpaper
Picture
Page 49
PressTo
3 S up or down scroll to a picture/animation
Scroll to
(None) to turn off the
wallpaper image.
4
SELECT (+)select the image
5 Sscroll to
Layout
6 CHANGE (+)change the image layout
7 Sscroll to
Centre, Tile, or Fit-to-screen
places the image in the centre
Centre
of the display.
Tile fills the display with multiple
copies of the image.
Fit-to-screen resizes the image, if
necessary, to fit the display.
8
SELECT (+)confirm the layout setting
9
BACK (-)save wallpaper settings
Setting a Screen Saver Image
Set a picture or animation as a screen saver image.
The screen saver image displays when the phone is on and no
activity is detected for a specified time. The image shrinks to fill the
display, if necessary. An animation repeats for one minute, then the
first frame of the animation displays.
Turn off the screen saver to extend battery life.
Find the FeatureM >
Settings > Personalise
>
Screen Saver
Setting Up Your Phone - 49
Page 50
PressTo
1 Sscroll to
2 CHANGE (+)open the picture viewer
3 S up or down scroll to a picture/animation
4
SELECT (+)select the image
5 Sscroll to
6 CHANGE (+)set the delay interval
7 Sscroll to the inactivity interval that
8
SELECT (+)confirm the delay setting
9
BACK (-)save screen saver settings
Picture
Scroll to
saver image.
starts the screen saver
(None) to turn off the screen
Delay
Setting Display Colour
Select the colour palette that your phone uses to display indicators,
highlights, and soft key labels.
Find the FeatureM >
Settings > Personalise
> Colour Style
Adjusting the Backlight
Set the amount of time that the display and keypad backlights
remain on.
Find the FeatureM > Settings > Initial Setup > Backlight
50 - Setting Up Your Phone
Page 51
Setting Display Timeout
Set the display to turn itself off when no activity is detected for a
specified time.
Find the FeatureM >
Settings > Initial Setup
> Display Timeout
Setting Up Your Phone - 51
Page 52
Calling Features
For basic instructions on how to make and answer calls, see
page 20.
Changing the Active Line
Change the active phone line to make and receive calls
from your other phone number.
Note: This feature is available only for dual-line-enabled
SIM cards.
Find the FeatureM > Settings > Phone Status
>
Active Line
The active line indicator in the display shows the currently active
phone line (see page 27).
Redialling a Number
PressTo
1 Nview the last 10 diallled calls list
2 Sscroll to the entry you want to call
3 Nredial the number
52 - Calling Features
Page 53
Using Automatic Redial
When you receive a busy signal, your phone displays Call
Failed, Number Busy
To redial the phone number:
PressTo
N or
RETRY (+)activate automatic redial
Your phone redials the number. When the call goes through, your
phone rings or vibrates one time, displays
connects the call.
.
Redial Successful, and then
Using Caller ID
Incoming Calls
Calling line identification (Caller ID) displays the phone
number for incoming calls in your phone’s display.
The phone displays the caller’s name (and picture, if
available) when the name is stored in your phonebook, or
Incoming Call when caller ID information is not available.
You can also set your phone to play a distinctive ringer ID and/or
light ID for specific entries stored in your phonebook. For more
information, see page 64.
Outgoing Calls
You can show or hide your phone number as an ID for the
calls that you make.
Find the FeatureM >
Settings > In-Call Setup
>
My Caller ID
Calling Features - 53
Page 54
You can override the default caller ID setting when you make a call.
While dialling (with digits visible in the display):
PressTo
M >
Hide ID/Show IDhide or show your caller ID for the
next call
Cancelling an Incoming Call
While the phone is ringing or vibrating:
PressTo
IGNORE (+)cancel the incoming call
Depending on your phone settings and/or service
subscription, the call may be diverted to another number,
go directly to your voice-mail, or the caller may hear a
busy signal.
Calling an Emergency Number
Your service provider programs one or more emergency phone
numbers, such as 999, that you can call under any circumstances,
even when your phone is locked or the SIM card is not inserted.
Emergency numbers vary by country. Your phone’s
preprogrammed emergency number(s) may not work in all
locations, and sometimes an emergency call cannot be placed due
to network, environmental, or interference issues.
PressTo
1 keypad keysdial the emergency number
2 Ncall the emergency number
54 - Calling Features
Page 55
Dialling International Numbers
Press and hold 0 to insert the local international access code (+)
for the country from which you are calling.
Viewing Recent Calls
Your phone keeps lists of the calls you recently received and
dialled, even if the calls did not connect. The lists are sorted from
newest to oldest entries. The oldest entries are deleted as new
entries are added.
Shortcut: Press N from the home screen to view the dialled calls
list.
Find the FeatureM >
PressTo
1 Sscroll to
2 SELECT (+)select the list
3 Sscroll to an entry
4 N
or
VIEW (+)
or
Mopen the
Recent Calls
Received Calls or Dialled Calls
\ means the call connected.
call the entry’s number
Press and hold N for 2 seconds to
send the number as DTMF tones
during a call.
view entry details
Last Calls Menu to view the
options avalable for the entry
Calling Features - 55
Page 56
The Last Calls Menu can include the following options:
OptionDescription
StoreCreate a phonebook entry with the
number in the
DeleteDelete the entry.
Delete AllDelete all entries in the list.
Hide ID/Show ID Hide or show your caller ID for the next
No. field.
call.
Send MessageOpen a new text message with the
number in the
Add DigitsAdd digits after the number.
Attach NumberAttach a number from the phonebook or
To field.
recent calls lists.
Send TonesSend the number to the network as DTMF
tones.
This option displays only during a call.
Talk then FaxTalk and then send a fax in the same call
(see page 71).
Returning an Unanswered Call
Your phone keeps a record of your unanswered calls, and displays:
•
X Missed Calls, where X is the number of missed calls
PressTo
1
VIEW (+)see the received calls list
2 Sselect a call to return
3 Nmake the call
56 - Calling Features
Page 57
Using the Notepad
The most recent set of digits entered on the keypad are stored in
your phone’s notepad memory. This can be a phone number that
you called, or a number that you entered but did not call. To retrieve
the number stored in the notepad:
Find the FeatureM >
PressTo
N
or
M
or
STORE (+)create a phonebook entry with the
Recent Calls > Notepad
call the number
open the
number or insert a special character
number in the
Dialling Menu to attach a
No. field
Attaching a Number
While dialling (with digits visible in the display):
PressTo
M >
Attach Numberattach a number from the phonebook
or recent calls lists
Calling With Speed Dial
Each entry you store in your phonebook is assigned a unique
speed dial number.
To see an entry’s speed dial number, press M >
to the entry, press VIEW (+).
Phonebook, scroll
Calling Features - 57
Page 58
To speed dial a phonebook entry:
PressTo
1 keypad keysenter the speed dial number for the
entry you want to call
2 #submit the number
3 Ncall the entry
Calling With 1-Touch Dial
To call phonebook entries 1 to 9, press and hold the single-digit
speed dial number for one second.
Tip: You must specify which phone number list you want to use
with this feature: phone memory phonebook or SIM card
phonebook (see page 64).
Using Voicemail
Voicemail messages that you receive are stored on the network. To
listen to your messages, you must call your voicemail phone
number.
Your service provider may include additional information about
using this feature.
Listening to Voicemail Messages
Find the FeatureM >
The phone calls your voicemail phone number. If no voicemail
number is stored, your phone prompts you to store a number.
58 - Calling Features
Messages > Voicemail
Page 59
Receiving a Voicemail Message
When you receive a voicemail message, your phone displays the
f (voicemail message) indicator and a New Voicemail
notification.
PressTo
CALL (+)listen to the message
The phone calls your voicemail phone number. If no voicemail
number is stored, your phone prompts you to store a number.
Storing Your Voicemail Number
If necessary, use the following procedure to store your voicemail
phone number on your phone. Usually, your service provider has
already done this for you.
Find the FeatureM >
M > Voicemail Setup
PressTo
1 keypad keysenter your voicemail number
2
OK (+)store the number
You cannot store a
this number. If you want to store a voicemail number with these
characters, create a phonebook entry for it. Then, you can use the
entry to call your voicemail.
p (pause), w (wait), or n (number) character in
Messages
Calling Features - 59
Page 60
Using Call Waiting
When you are on a call, an alert tone sounds to indicate
that you have received another call.
PressTo
1 Nanswer the new call
2
SWITCH (+)
or
LINK (-)
or
M >
You must turn on call waiting to use the feature. To turn call waiting
on or off:
EndCallOnHold end the call on hold
switch between calls
connect the 2 calls
Find the FeatureM >
Putting a Call On Hold
PressTo
HOLD (+) (if available)
or
M >
60 - Calling Features
Hold
put the call on hold
Settings > In-Call Setup
> Call Waiting
Page 61
Transferring a Call
You can announce that you are transferring an active call
to another party, or you can transfer the call without
announcing the transfer.
Announce the Call Transfer
Find the FeatureM > Hold
PressTo
1 keypad keysdial the number where you are
transferring the call
2 Ncall the number and speak to the
person who answers
3 Mopen the menu
4 Sscroll to
5 SELECT (+)select Transfer
6 OK (+)confirm the transfer
Do Not Announce the Call Transfer
Transfer
Find the FeatureM >
PressTo
1 keypad keysdial the number where you are
2 Ntransfer the call
Transfer
transferring the call
Calling Features - 61
Page 62
Phone Features
Feature Quick Reference
This section helps you locate features on your phone that are not
described in this guide.
Calling Features
FeatureDescription
Conference CallDuring a call:
M >
press N, press
Call DivertingSet up or cancel call diverting:
M >
Call BarringRestrict outgoing or incoming
calls:
M >
>
Messages
FeatureDescription
Send Text
Message
Send a text message:
M >
>
Hold, dial next number,
LINK (-)
Settings > Call Divert
Settings > Security
Call Barring
Messages > New Message
New Short Msg
62 - Phone Features
Page 63
FeatureDescription
Send Multimedia
Message
Send a multimedia message:
M >
Messages > New Message
> New Multimedia Msg
Use MMS
Tem plat e
Open an MMS template with
preloaded media:
M >
>
Messages > New Message
MMS Templates
Read Message Read a new text or multimedia
message that you have
received:
Press
READ (+).
Store Message
Objects
Go to a multimedia message
slide, then:
M >
Store
Chat
FeatureDescription
Start Chat Start a new chat session:
M >
M > New Chat
Receive Chat
Request
When you receive a chat
request:
Press
IGNORE (-).
End Chat During a chat session:
M >
Office Tools > Chat
ACCEPT (+) or
End Chat
Phone Features - 63
Page 64
Phonebook
FeatureDescription
Create EntryCreate a new phonebook entry:
Type in telephone number
>
Store > enter other details
Create Group
Mailing List
Dial NumberCall a number stored in the phonebook:
Voice Dial Number Voice dial a number stored in the
Set Ringer ID for
Entry
Create a group mailing list as a phonebook
entry:
M >
Phonebook
M > New > Mailing List
M >
Phonebook, highlight the phonebook
entry, press N to call
phonebook:
>
Office Tools > Dialling Services > Voice Dial
When prompted, say the entry’s name
(within 2 seconds).
Assign a distinctive ringer alert to a
phonebook entry:
M >
M >
Note: The
Phonebook > entry
Edit > Ringer ID > ringer name
Ringer ID option is not available
for entries stored on the SIM card.
64 - Phone Features
Page 65
FeatureDescription
Set Picture ID for
Entry
Assign a picture to display when you
receive calls from an entry:
M >
M >
Note: The
Phonebook > entry
Edit > Picture > picture
Picture option is not available for
entries stored on the SIM card.
Set Category for
Entry
Set the category for a phonebook entry:
M >
M >
Note: The
Phonebook > entry
Edit > Category > category name
Category option is not available
for entries stored on the SIM card.
Set Category View Set a phonebook category view:
M >
Phonebook
M > Categories > category view
Sort Phonebook
List
Set the order in which phonebook entries
are listed:
M >
Phonebook
M > Setup > Sort by > sort order
Set Primary
Number
Set the primary number for a phonebook
entry with multiple numbers:
M >
M >
Phonebook, scroll to entry, press
Set Primary > phone number
Phone Features - 65
Page 66
FeatureDescription
Copy Phonebook
Entry to Another
Device
Copy a phonebook entry to another
phone, computer, or device:
M >
M >
Phonebook, highlight the entry, press
Send > Bluetooth
1-Touch Dial Set 1-touch dial to call entries stored in
your phone memory phonebook or the
SIM card phonebook:
M >
Settings > Initial Setup > 1-Touch Dial
Personalising Features
FeatureDescription
Ring Style Change the ring alert for an event:
M >
> select chosen alerts
Ringer IDs Activate distinctive ring alerts assigned to
phonebook entries:
M >
>
Ring VolumeSet ringer volume:
M >
>
Shortcut: Press S right or left in the
home screen.
Keypad VolumeSet keypad keypress volume:
M >
>
Settings > Ring Styles > style Detail
Settings > Ring Styles > style Detail
Ringer IDs
Settings > Ring Styles > style Detail
Ring Volume
Settings > Ring Styles > style Detail
Key Volume
66 - Phone Features
Page 67
FeatureDescription
Clock View Display an analogue clock or digital time
readout in the home screen:
M >
>
Settings > Personalise > Home Screen
Clock
Menu ViewDisplay the main menu as graphic icons or
as a text-based list:
M >
Settings > Personalise > Main Menu
> View
Main Menu Reorder your phone’s main menu:
Change Soft Key
Labels
M >
>
Change soft key labels in the home screen
M >
>
Settings > Personalise > Main Menu
Reorder
Settings > Personalise > Home Screen
Home Keys
Shortcuts Create a shortcut to a menu item:
Highlight the menu item, then press and
hold M.
Select a shortcut:
M >
Office Tools > Shortcuts
> shortcut name
Phone Features - 67
Page 68
Menu Features
FeatureDescription
LanguageSet menu language:
M >
Settings > Initial Setup > Language
Master ResetReset all options except unlock code,
security code, and lifetime timer:
M >
Settings > Initial Setup > Master Reset
Master Clear Reset all options except unlock code,
security code, and lifetime timer, and clear
all user settings and entries except SIM
card information:
M >
Settings > Initial Setup > Master Clear
Dialling Features
FeatureDescription
Fixed Dial When you turn on fixed dialling,
you can call only numbers stored
in the fixed dial list.
Turn fixed dialling on or off:
M >
Use the fixed dial list:
M >
> Fixed Dial
Service Dial Dial service phone numbers:
M >
> Dialling Services > Service Dial
Settings > Security > Fixed Dial
Office Tools > Dialling Services
Office Tools
68 - Phone Features
Page 69
FeatureDescription
Quick Dial Your service provider may
program your phone with one or
more quick dial numbers, such
as the customer service number.
Dial preprogrammed phone numbers:
M >
>
Office Tools > Dialling Services
Quick Dial
DTMF Tones Activate DTMF tones:
M >
Settings > Initial Setup > DTMF
Send DTMF tones during a call:
Press number keys.
Send stored numbers as DTMF tones
during a call:
Highlight a number in the phonebook or
recent calls lists, then press M
>
Send Tones.
Call Monitoring
Network connection time is the elapsed time from the moment you
connect to your service provider's network to the moment you end
the call by pressing O. This time includes busy signals and
ringing.
The amount of network connection time you track on your
resettable timer may not equal the amount of time for which
you are billed by your service provider. For billing information,
contact your service provider.
Phone Features - 69
Page 70
FeatureDescription
Call TimesView call timers:
M >
Recent Calls > Call Times
In-Call TimerDisplay time or cost information
during a call:
M >
>
Settings > In-Call Setup
In-Call Timer
Handsfree Features
Note: The use of wireless devices and their accessories may be
prohibited or restricted in certain areas. Always obey the laws and
regulations on the use of these products.
FeatureDescription
Speaker-phoneWhen in an active call, press
SPEAKER (+).
Auto Answer
(car kit or headset)
Voice Dial
(headset)
70 - Phone Features
Automatically answer calls
when connected to a car kit or
headset:
M >
Headset > Auto Answer
Settings > Car Settings or
Enable voice dial with headset
send/end key:
M >
>
Settings > Headset
Voice Dial
Page 71
FeatureDescription
Auto Handsfree
(car kit)
Power-Off Delay
(car kit)
Charger Time
(car kit)
Automatically route calls to a
car kit when connected:
M >
>
Settings > Car Settings
Auto Handsfree
Set the phone to stay on for a
specified time after the ignition
is switched off:
M >
>
Settings > Car Settings
Power-Off Delay
Charge the phone for a
specified time after the ignition
is switched off:
M >
>
Settings > Car Settings
Charger Time
Data and Fax Calls
FeatureDescription
Send Data or FaxConnect your phone to the
device, then place the call
through the device application.
Receive Data or
Fax
Connect your phone to the
device, then answer the call
through the device application.
Talk Then FaxConnect your phone to the
device, enter the number, then
press M >
Talk Then Fax, then
press N to make the call.
Phone Features - 71
Page 72
Bluetooth® Wireless Connections
FeatureDescription
Make Phone
Visible to Other
Device
Connect to a
Handsfree Device
Connect to a
Handsfree Device
During a Call
Allow an unknown Bluetooth
device to discover your phone:
M >
>
Bluetooth Link > Setup
Find Me
Tip: After the first connection, you do not
need to select Find Me to reconnect.
Connect to a handsfree device:
M >
>
Bluetooth Link > Handsfree
[Look for Devices]
Note: If necessary, enter the
Bluetooth PIN code for the device (consult
the device user’s guide, or try 0000).
Switch to a headset or car kit
during a call:
M >
Use Bluetooth
Disconnect From
Device
Set Bluetooth
Options
72 - Phone Features
Disconnect from a device:
Highlight the device name and
press the
DROP key.
Set your phone’s Bluetooth
options:
M >
Bluetooth Link > Setup
Tip: If you leave Power set to On
all the time, your battery will not last as
long.
Page 73
Network Features
FeatureDescription
Network Settings View network information and
adjust network settings:
M >
Settings > Network
Personal Organiser Features
FeatureDescription
Create Datebook
Event
View or Edit
Datebook Event
Event Reminder View event reminder:
Copy Datebook
Event to Another
Device
Create a new datebook event:
M >
Office Tools > Datebook, highlight the
day, press the centre select button, press
M >
New
View or edit event details:
M >
Office Tools > Datebook, highlight the
day, press the centre select button, press
VIEW (+)
VIEW (+)
Close event reminder:
BACK (-)
Copy a datebook event to another phone,
computer, or device:
M >
Office Tools > Datebook, highlight the
day, press the centre select button,
highlight the event, press M >
> Bluetooth
Send
Phone Features - 73
Page 74
FeatureDescription
Set AlarmSet an alarm:
M >
Office Tools > Alarm Clock
Tur n Off Alarm Turn off alarm:
Press
DISABLE (-) or O.
Set 8-minute delay:
Press
SNOOZE (+).
CalculatorCalculate numbers:
Currency
Converter
M >
Convert currency:
M >
Office Tools > Calculator
Office Tools > Calculator
M > Exchange Rate
Enter exchange rate, press OK (+),
enter amount, and select
the display.
Security
FeatureDescription
SIM PIN Lock or unlock the SIM card:
M >
Caution: If you enter an incorrect PIN
code 3 times in a row, your SIM card is
disabled and your phone displays
SIM Blocked.
Lock ApplicationLock phone applications:
M >
Settings > Security > SIM PIN
Settings > Security > Lock Application
$ in the bottom of
74 - Phone Features
Page 75
News and Entertainment
FeatureDescription
Launch Micro-
Browser
Start a micro-browser session:
M >
Web Access > Browser
Download Objects
from Web Page
Download a picture, sound, or
phone theme from a Web page:
Highlight the file, press
SELECT (+), press STORE (+).
Web Sessions Select or create a Web session:
Apply Phone
Theme
M >
Apply a grouped set of image
and sound files to your phone:
M >
Web Access > Web Sessions
Multimedia > Themes
> theme
Download Game
or Application
(micro-browser)
Download a Java game or
application with the microbrowser:
M >
Web Access > Browser,
highlight the application, press
SELECT (+), press DWNLOAD (+)
Download Game
or Application
(computer)
Download a Java game or
application from a computer:
Connect your phone to the
computer, press M >
>
Java Settings > Java App Loader.
Settings
Phone Features - 75
Page 76
FeatureDescription
Launch Game or
Application
Launch a Java game or
application:
M >
Games & Apps, highlight
the application, press
SELECT (+)
Manage PicturesManage pictures and
animations:
M >
Multimedia > Pictures
Manage Sounds Manage ring tones, sounds that you have
composed or downloaded:
Manage Video
Clips
M >
Manage video clips:
M >
Multimedia > Sounds
Multimedia > Videos
Create Ring Tones Create ring tones that you can use with
your phone:
M >
Multimedia > Sounds > [New iMelody]
76 - Phone Features
Page 77
Specific Absorption Rate Data
This model phone meets international standards for exposure
to radio waves
Your mobile phone is a radio transmitter and receiver. It is designed
and manufactured not to exceed limits for exposure to radio
frequency (RF) energy. These limits are part of comprehensive
guidelines and establish permitted levels of RF energy for the
general population. The guidelines are based on standards that
were developed by independent scientific organisations through
periodic and thorough evaluation of scientific studies. The
guidelines include a substantial safety margin designed to assure
the safety of all persons, regardless of age and health.
The exposure standard for mobile phones employs a unit of
measurement known as the Specific Absorption Rate, or SAR.
Under the guidelines for your phone model, the SAR limit is
2.0 W/kg.
CENELEC
with the phone transmitting at its highest certified power level in all
tested frequency bands. Although the SAR is determined at the
highest certified power level, the actual SAR of the phone while
operating can be well below the maximum value. This is because
the phone is designed to operate at multiple power levels so as to
use only the power required to reach the network. In general, the
closer you are to a base station, the lower the power output of the
phone.
Before a phone model is available for sale to the public, it is tested
to confirm compliance with the guidelines. The tests are performed
in positions that conform to a uniform testing methodology
determined by an expert standards body. The highest SAR value
for this model phone when tested for use at the ear is: X.XX W/kg.
1
Tests for SAR are conducted in accordance with
2
testing procedures using standard operating positions
3
Specific Absorption Rate Data - 77
Page 78
While there may be differences between the SAR levels of various
phones and at various positions, they all meet the governmental
requirements for safe exposure. Please note that improvements to
this product model could cause differences in the SAR value for
later products; in all cases, products are designed to be within the
guidelines.
1The SAR limit recommended by international guidelines (ICNIRP) for mobile
phones used by the public is 2.0 watts/kilogram (W/kg) averaged over ten grams of
tissue. The limit incorporates a substantial margin for safety to give additional
protection for the public and to account for any variations in measurements.
2CENELEC is a European Union standards body.
3Additional related information includes the Motorola testing protocol, assessment
procedure, and measurement uncertainty range for this product.
78 - Specific Absorption Rate Data
Page 79
Index
A
accessories 15
accessory mini-USB connector
1
active line indicator 27
active line, changing 52
alarm clock 74
alert
creating 76
defined 48
setting 19, 48, 66
turning off 19
animation
downloading 75
screen saver 49
viewing 76
wallpaper 48
answer/send key 1
answering a call 20
application, locking and
unlocking 74
automatic redial 53
B
backlight 50
barring calls 62
battery
charging 18
extending battery life 16, 50
installing 17
level indicator 29
Bluetooth 66, 72, 73
browser. See micro-browser
C
calculator 74
call
alert, turning off 19
answering 20
barring 62
barring password, changing
41
call waiting 60
dialled calls list 55
dialling 20
diverting 62
emergency number 54
ending 20
handsfree speaker 41
hold 60
international access code 55
making 20
received calls list 55