Mocet Soho IP3022, Soho IP3021 Quick User Manual
IP3022 / IP3021
SOHO IP Deskphone
Quick User Guide
Copyright © 2014, All Rights Reserved.
Ver: 1.11 D/C: 103-0113
Page 2
MOCET IP3022 / IP3021 SOHO IP Deskphone Quick User Guide
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the following
measures:
•
Reorient or relocate the receiving antenna.
•
Increase the separation between the equipment and receiver.
•
Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
•
Consult the dealer or an experienced radio/TV technician for help.
Modifications not expressly approved by the manufacturer could void the user's authority to
operated the equipment under FCC rules.
CE Declaration of Conformity
This equipment complies with the requirements relating to electromagnetic compatibility, EN55022
class B for ITE and EN 50082-1. This meets the essential protection requirements of the European
Council Directive 89/336/EEC on the approximation of the laws of the Member States relating to
electromagnetic compatibility.
C-Tick Declaration of Conformity
This equipment passed tests performed according to AS/NZS CISPR 22:2009/A1:2010 Class B at
Sporton International Inc. Lab. Certificate.
Environment
The phone you have purchased, as well as any used batteries must not be disposed of with
household waste. You should return these to your distributor if they are to replaced or dispose of
them in an approved recycling center.
Trademarks
All company, brand and product names, like Metaswitch™, Broadsoft™, Freeswitch™ and
Asterisk™ are registered trademarks of their respective owners.
WARNING!
▼
1.
Read these installation instructions carefully before connecting the IP phone to its power.
2.
To reduce the risk of electric shock, do not remove the cover from the IP phone or attempt to
dismantle it. Opening or removing covers may expose you to dangerous voltage levels.
Equally, incorrect reassembly could cause electric shock on re-use of the appliance.
3.
Do not expose the IP Phone to Fire, direct sunlight or excessive heat.
4.
Do not expose the IP Phone to rain or moisture and do not allow it to come into contact with
water.
5.
Do not install the IP phone in an environment likely to present a THREAT OF IMPACT.
6.
You may clean the IP phone using a fine damp cloth. Never use solvents (such as
trichloroethylene or acetone), which may damage the phone’s plastic surface and LCD
screen. Never spray the phone with any cleaning product whatsoever.
!
!
Page 3
MOCET IP3022 / IP3021 SOHO IP Deskphone Quick User Guide
7.
Take care not to scratch the LCD screen.
8.
The IP phone is designed to work in temperatures from 5oC to 40oC.
9.
The IP phone must be installed at least 1 meter from radio frequency equipment, such as
TVs, radios, hi-fi or video equipment (which radiate electromagnetic fields).
10.
Do not connect the LAN/PC port to any network other than an Ethernet network.
11.
Do not attempt to upgrade your IP phone in an unstable power environment. This could
cause unexpected issues.
12.
Do not work on the system or connect or disconnect cables during lightning storms.
13.
Children don't recognize the risks of electrical appliances. Therefore use or keep the phone
only under supervision of adults or out of the reach from children.
14.
No repair can be performed by the end user, if you experience trouble with this equipment,
for repair or warranty information, please contact your supplier.
Page 4
MOCET IP3022 / IP3021 SOHO IP Deskphone Quick User Guide
Introduction
The MOCET IP3022/IP3021 SOHO IP Desk-phone is an easy-to-use high quality IP
phone with a variety of advanced features, including support for secure calls with trusted
layer security (TLS), Secure Real-time Transfer Protocol (SRTP), and a built-in IP Security
(IPSEC) virtual private network (VPN) client.
The IP3022/IP3021 has a graphic and backlit LCD display and supports wideband audio
through handset, headset and Speakerphone. It can be positioned 2 tilt angles and has a
wall mount option, and has a built-in two port 10/100 Ethernet switch* with automatic
support for power over Ethernet (PoE). The IP3022 / IP3021 has 8 programable buttons
and can be configured through the simple built in LCD menus or from the web user
interface of phone. The IP3022 / IP3021 can be automatically provisioned from a local
server (like DHCP or TFTP), or from Internet using the built-in MOCET auto-provisioning
system and management protocols.
The phone supports industry-standard SIP protocols and rich business call features,
including call Hold, built-in music-on-hold (MoH), Transfer, Forward, 3-way on-phone
conferencing, and MWI. The IP3022 / IP3021 can be interoperable with a wide range of
SIP servers or IP-PBX including those based on Metaswitch™, Broadsoft™,
Freeswitch™ and Asterisk™. The phone also offer business class capability for SOHO
office with a support up to 3 simultaneous SIP trunks and total 6 calls appearance.
There are some optional items for function expansion, including a wall-mount kit, Electronic
Hook Switch (EHS) for wireless headset, and Extended Dial Module port. These functions
make the IP3022 / IP3021 more powerful and versatile in application in order to meet
business professional user needs. Besides, there is a family model table below for you to
choice the proper phone you need.
Model
Name
PoE
Power
Adapter
BLF LEDs
(Red/Green)
IP-WMK (Wall
Mount Kit)
IP-EHS IP-EDMX PA 5V/2A
IP3022
Class 1
― 8 Option Option Option Option
IP3022P
Class 1 5V/550mA
8 Option Option Option ―
IP3021A
― 5V/550mA
― Option ― ― ―
Hardware Installation
Attaching the Stand to the Phone
Please select the angle you want and then align and slide the stand snaps into the slots
on the rear side of the phone. You may slide out and change to the second angle.
Page 5
MOCET IP3022 / IP3021 SOHO IP Deskphone Quick User Guide
Connecting the Handset to the Phone
Connect the handset to the curly handset cord and then connect the other end of the
curly handset cord to the port marked HAND with the handset icon on the bottom of the
phone.
Connecting the Ethernet Cable
Using a general CAT-5 Ethernet cable, follow the installation steps below:
(1) If your Ethernet Switch supports PoE: (see figure below)
- Please connect an Ethernet cable to the Switch port from the LAN port of the
IP3022 / IP3021. Then you will see the phone LEDs and buttons are lit up
momentarily and then the phone will start to boot.
(2) If your Ethernet Switch doesn’t support PoE: (see figure below)
- Please connect an Ethernet cable to the Switch port from LAN port of the
IP3022 / IP3021.
- Plug in the IP3022 / IP3021 power adaptor* to the wall power outlet then plug the
barrel plug to the power port on the back of the phone. You should see the
phone MWI LED light up momentarily and the phone will boot.
Page 6
MOCET IP3022 / IP3021 SOHO IP Deskphone Quick User Guide
To eliminate the requirement for multiple Ethernet cables to an user’s location, the user’s
computer can be connected to the network through the second Ethernet port on the
IP3022 / IP3021 phone with an Ethernet cable.
PoE Ethernet Switch
Office LAN
or Internet
Non-
PoE
Ethernet Switch
Office LAN
or Internet
Loading...