Mitsubishi Electronics SR-HD5 User Manual

Mitsubishi SR-HD5 HD DIRECTV Plus Receiver

Trademarks and Copyrights—This manual is copyright Mitsubishi and copyright © 1995-2000 by Hughes Network Systems. Software contained in the HD receiver and referenced in this manual is copyright © 1995-2000 by Hughes Network Systems. Some features are patent pending. WatchWord, PreSelect, TurboTune, AlphaTune, and OneLine Guide are trademarks of Hughes Network Systems. DIRECTV, DIRECTV PLUS, DIRECTV HOME SERVICES, ADVANCED PROGRAM GUIDE, and DIRECT TICKET are trademarks of DIRECTV, Inc. a unit of Hughes Electronics Corp., and are used with permission. “NFL,” the NFL Shield and “NFL SUNDAY TICKET” are registered trademarks of The National Football League and its affiliates. “NHL,” the NHL Shield and “NHL CENTER ICE” are registered trademarks of the National Hockey League. “ESPN Full Court” is a trademark of ESPN, Inc. “MLB,” “MLB EXTRA INNINGS,” “Major League Baseball,” and the Major League Baseball silhouetted batter logo are service marks of Major League Baseball Properties, Inc. Major League Baseball trademarks and copyright are used with permission of Major League Baseball Properties, Inc. All other trademarks and service marks are the property of their respective owners.

This product is the subject of one or more U.S. or foreign patents pending.

Disclaimer—Every effort has been made to ensure the correctness and completeness of the material in this document. No company shall be liable for errors contained herein. The information in this document is subject to change without notice. No warranty of any kind is made with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose.

StarSight

Information—StarSight is a registered

trademark of StarSight Telecast, Inc. StarSight features are licensed under one or more of the following U.S. patents: 4,706,121; 5,151,789; 5,335,277; 5,353,121; 5,479,266; 5,479,268; and 5,532,754. Use rights reserved.

Macrovision

Information—Macrovision is a

registered trademark of Macrovision Corporation. This device incorporates an anticopy process technology that is protected by U.S. patents and other intellectual property rights. The anticopy process is licensed for noncommercial, home use only. Reverse engineering or disassembly is prohibited.

Information—Manufactured under license

Dolby

Note on Recording Programming—Most television programs and films are copyrighted. This

means that someone has legal rights governing the reproduction and distribution of this material. In certain circumstances, copyright law may apply to private in-home taping of copyrighted materials. In most cases, it is permissible to record for personal use, as long as you do not sell the material. You must act responsibly in this area—check into the matter if you are unsure.

Some pay per view programs may be licensed from producers as “view only” programs. These are copyrighted programs and may not be copied or reproduced for any purpose without the express written permission of the copyright owner.

DIRECTV

can only be received by U.S. residents and is not available outside the U.S. DIRECTV sold separately and independently of DIRECTV

Programming—DIRECTV® service

programming is

System hardware. Due to copyright restrictions, you may not be able to view some high definition programs in high definition format using this product. A valid programming subscription is required to operate DIRECTV

System hardware. For subscription information, or to resolve problems related to programming, call the service provider, DIRECTV at 1-800DIRECTV (347-3288).

Satellite System Hardware and Installation—To arrange for professional installation of your satellite system, ask questions, or to resolve problems, please contact your dealer. (If additional information is needed, please contact Mitsubishi Consumer Relations toll free at 1-800-332-2119.)

Mitsubishi Consumer Relations

1-800-332-2119

Subscriptions and pay per view

1-800-DIRECTV

PLEASE MAKE NOTE OF THE FOLLOWING

INFORMATION FOR WARRANTY

System Model #:________________________

Receiver Model #: SR-HD5

Receiver Serial #:________________________

Access Card #:________ ________ ________

LNB Serial #:___________________________

Page ii

Important Safety Instructions

For your safety and protection, read this entire Owner’s Manual before you attempt to install or use your satellite system. In particular, read this safety section carefully. Keep this safety information where you can refer to it, if necessary.

Heed Cautions—All cautions on the product and in the operating instructions should be adhered to.

Follow Instructions—All operating and use instructions should be followed.

THESE CAUTIONS AND SYMBOLS APPEAR ON THE BACK OF THE HD RECEIVER

WARNING or CAUTION

Double insulated systems are protected by additional board clearances and creepage, so that the unit will not be a safety hazard to the end-user.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

THESE ARE DEFINITIONS FOR ALERTS USED IN THIS MANUAL

WARNING or CAUTION

Where you see this alert symbol and the WARNING or CAUTION heading, strictly follow the warning instructions to avoid personal injury.

DANGER

Electric shock hazard: Where you see this symbol and the DANGER heading, strictly follow the warning instructions to avoid electric shock injury.

THESE ALERTS APPEAR IN THIS MANUAL

DANGER

To reduce the risk of fire or electrical shock, do not expose this apparatus to rain or moisture.

flow to the unit. Blocking the airflow to the unit could impair performance or damage your receiver. Also do not stack the HD receiver on top of a “hot” component such as an audio power amplifier.

CAUTION

Do not stack electronic components or other objects on top of the HD receiver. The slots on top of the receiver must be left uncovered to allow proper air-

Page iii

Mitsubishi SR-HD5 HD DIRECTV Plus Receiver

INSTALLATION

Polarizati on—This HD receiver is equipped with a plug

that will fit into the power outlet only one way. Do not defeat the safety purpose of the polarized or groundingtype plug. A polarized plug has two blades with one wider than the other. A grounding-type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. To prevent electric shock, do not use this plug with an extension cord or outlet unless you can fully insert the blades without blade exposure.

Power Sources—Operate this HD receiver only from the type of power source indicated on the marking label. If you are not sure of the type of power supply to your home, consult your dealer or local power company.

Power-Cord Protection—Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

Overloading—Do not overload wall outlets, extension cords, or integral convenience receptacles as this can result in a risk of fire or electric shock.

Ven tilation—Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of the product and to protect it from overheating. Do not block any ventilation openings, install in accordance with the manufacturer’s instructions.

The openings should never be blocked by placing the product on a bed, sofa, rug, or other similar surface. This product should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer’s instructions have been adhered to.

For electrical safety, power line operated equipment or accessories connected to this unit should bear the UL listing mark and should not be modified so as to defeat the safety features. This will help avoid any potential hazard from electrical shock or fire. If in doubt, contact qualified service personnel.

Heat—Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.

Accessories—To avoid personal injury or damage to the HD receiver, do not place the HD receiver on any unstable cart, stand, table, or bracket. Any mounting of the product should follow the manufacturer’s instructions.

Attachments—Do not use attachments unless recommended by Mitsubishi as they may cause hazards.

Satellite Dish Antenna Grounding—The outdoor satellite dish antenna used to receive satellite signals and the cable used to connect the satellite dish antenna to the indoor receiving unit are required to comply with local installation codes and the appropriate sections of the

National Electric Code (NEC) and in particular Article 810–15, which covers proper installation and grounding of television receiving equipment, as well as to Article 820–33, which specifies that the satellite dish antenna cable ground shall be connected to the grounding system of the building as close to the point of cable entry as practical. These codes require proper grounding of the metal structure of the outdoor satellite dish antenna and grounding of the connecting cable at a point where it enters the house (or other building). If you are having a professional installer make the installation, the installer must observe installation codes. This manual contains instructions on how to make the installation in compliance with the NEC. If additional local installation codes apply, contact local inspection authorities.

Ground

clamp

Electric

service

equipment

Ground

clamps

Coaxial cable

Grounding block

Coaxial cable

Grounding conductor

Power service grounding electrode

EXAMPLE OF ANTENNA GROUNDING ACCORDING TO THE NATIONAL ELECTRICAL CODE INSTRUCTIONS CONTAINED IN “RADIO AND TELEVISION EQUIPMENT”

Note: The HD receiver shall be grounded through the satellite/local antenna cable before plugging into the telephone jack, and it must remain grounded thereafter.

Water and Moisture—Warning! To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.

Lightning—For added protection for this product, unplug this apparatus during lightning storms or when unused for long periods of time. Unplug it from the wall outlet, disconnect the antenna and cable system, and disconnect it from the telephone line. This will prevent damage to the product due to lightning and power line surges.

Television Antenna Information—Installing an outdoor antenna can be hazardous and should be left to a professional antenna installer. Do not locate the outside antenna system in the vicinity of overhead power lines or other electric light or power circuits or where it can fall into such power lines or circuits. When installing an outside antenna system, take extreme care to keep from touching such power lines or circuits, as contact with them might be fatal. If an outside antenna is connected to the HD receiver, be sure the antenna system is grounded so as to provide some protection against voltage surges and built-up static charges. Section 810 of the NEC, NFPA No. 70 1987, provides information with respect to

Page iv

Installation

proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of the grounding conductors, location of antenna discharge unit, connection to grounding electrodes, and requirements for the grounding electrode.

Note to CATV System Installer—This reminder is provided to call the CATV system installer’s attention to Section 820-40 of the NEC which provides guidelines for proper grounding and particularly specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as practical.

Power Lines—Extreme care must be taken when installing and adjusting or maintaining the outdoor antenna and connecting cable, especially in the vicinity of overhead power lines, electric lights, or power circuits. When installing the outdoor antenna or cable, extreme care should be taken to keep from touching or

SERVICE

Servicing—Do not attempt to service this HD receiver

yourself as opening or removing covers may expose you to dangerous voltage or other hazards. There are no user serviceable parts inside. Refer all servicing to qualified service personnel.

Conditions Requiring Service—Unplug the HD receiver from the wall outlet and refer servicing to qualified personnel under the following conditions:

● When the power supply cord or plug is damaged.

● If liquid has been spilled on, or objects have fallen

into, the HD receiver or it has been exposed to water.

● If the HD receiver does not operate normally by fol-

lowing the operating instructions. Adjust only those controls that are covered by the operating instructions. Other adjustments may result in damage and will

approaching such power lines or circuits, as contact with them might be fatal.

Cleaning—Unplug this HD receiver from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Clean only with dry cloth.

Object and Liquid Entry—Never push objects of any kind into this HD receiver through openings as they may touch dangerous voltages or short out parts that could result in a fire or electric shock. Never spill liquid of any kind on the HD receiver. No objects filled with liquids, such as vases, shall be placed on the apparatus.

often require extensive work by a qualified technician to restore the HD receiver to its normal operation.

● If the HD receiver has been dropped or the cabinet has

been damaged.

● When the HD receiver exhibits a distinct change in

performance.

Replacement Parts—When replacement parts are required, have the technician verify that the replacements being used have the same safety characteristics as the original parts. Use of replacement parts specified by the manufacturer can prevent fire, electric shock, or other hazards.

Safety Check—Upon completion of any service or repairs to this HD receiver, ask the service technician to perform safety checks recommended by the manufacturer to determine that the HD receiver is in safe operating condition.

Page v

Mitsubishi SR-HD5 HD DIRECTV Plus Receiver

Federal Communications Commission

(FCC) Regulatory Information

Federal Communications Commission (FCC)—

This equipment complies with both Part 15 and Part 68 of the FCC rules.

Part 15 compliance—

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by removing and applying power to the equipment, the user is encouraged to try to correct the interference by one or more of the following measures:

● Reorient or relocate the receiving satellite dish

antenna.

● Increase the separation between the equipment and the

HD receiver.

● Connect the equipment into an outlet on a circuit dif-

ferent from that to which the HD receiver is connected.

● Consult the dealer or an experienced radio/TV techni-

cian for help.

The user may find the following booklet, prepared by the Federal Communications Commission, helpful: “How to Identify and Resolve Radio and TV Interference Problems.” This booklet is available from the U.S. Government Printing Office, Washington, DC.

To meet FCC requirements, only peripherals (computer input/output devices, terminals, printers, etc.) certified to comply with the Class B limits may be attached to this device. Operation with noncertified peripherals is likely to result in interference to radio and TV reception.

To meet FCC requirements, shielded cables are required to connect the device to a personal computer, peripheral, or other Class B certified device.

Part 68 compliance—

1) This equipment complies with Part 68 of the FCC rules. On the modem card is a label that contains, among other information, the FCC Registration Number and Ringer Equivalence Number (REN) for this equipment. If requested, this information must be provided to the Telephone Company.

The REN is used to determine the quantity of devices which may be connected to the telephone line. An excessive number of REN’s on the line may result in the devices not ringing in response to an incoming call. In most, but not all areas, the sum of the number of REN’s should not exceed five (5). To be certain of the number of devices that may be connected to the line, contact the Telephone Company to determine the maximum number of REN’s permitted for the calling area.

2) If the terminal equipment HD Receiver (Model Number: SR-HD5) causes harm to the telephone network, the Telephone Company will notify you in advance that temporary discontinuance of service may be required. But, if advance notice is not practical, the Telephone Company will notify you as soon as possible. Also, you will be advised of your right to file a complaint with the FCC, if you believe it is necessary.

3) The Telephone Company may make changes in its facilities, equipment, operations, or procedures that could affect the operation of the equipment. If this happens, the Telephone Company will provide advance notice in order for you to make the necessary modifications in order to maintain interrupted service.

4) If trouble is experienced with the equipment HD Receiver (Model Number: SR-HD5), please contact the following for repair and/or warranty information:

Mitsubishi Digital Electronics America, Inc. 9351 Jeronimo Ave. Irvine, CA 92618-1904 Telephone Number: 800-332-2119

● Mitsubishi must make any necessary repairs to

the modem portion of this equipment in order to maintain valid FCC registration. Do not attempt to repair or service your modem. Return it to Mitsubishi.

● No repairs can be made by customers. All repairs

are to be done by Mitsubishi Authorized Service Centers (ASC).

● This equipment cannot be used on public coin

service provided by the Telephone Company. Connection to Party Line Service is subject to state tariffs.

Page vi

Table of Contents

Important Safety Instructions............................iii

Federal Communications Commission (FCC)

Regulatory Information............................vi

A First Look at the HD System........................1-1

What You Should Do First.........................1-1

How Does All This Work? .........................1-2

HD System Components ................................1-3

The DIRECTV PLUS™ Satellite Dish

Antenna.................................................1-3

The HD Receiver with DIRECTV PLUS™

Receiver Built-in ...................................1-4

The Remote Control...................................1-6

Installing the Remote Control Batteries ....1-8

Setting Up Your HD Receiver..........................2-1

Choosing the Best Connection for Your

Entertainment System...........................2-2

HD Receiver and Satellite Dish

Antenna with Terrestrial Antenna

or Cable Service ...................................2-3

HD Receiver and HDTV Monitor..............2-4

HD Receiver with HDTV Monitor

and VCR................................................2-5

HD Receiver and Standard Definition

TV Monitor ...........................................2-8

HD Receiver with Standard Definition

TV Monitor and VCR............................2-9

HD Receiver and Dolby

Receiver or Decoder...........................2-12

HD Receiver and Standard Stereo

System .................................................2-13

Finishing Up............................................2-13

Connecting the VCR Control Cable.............2-14

Finding the VCR’s Remote Control

Sensor .................................................2-14

RF Remote Control Receiver .......................2-14

Connecting the RF Remote Control

Receiver/Antenna ...............................2-15

Setting the Address of Your HD

Receiver and Remote Control.............2-15

Now You Can Turn It On.............................2-15

POWER-ON Screen.................................2-16

Exit...........................................................2-16

Installation...............................................2-16

Controlling the HD Receiver............................3-1

Front Panel vs. Remote Control Keys............3-1

Basic Navigation ............................................3-1

Digital

Setting Up the Satellite Dish Antenna and

Terrestrial Inputs.................................... 4-1

Installing and Testing the Satellite Dish

Antenna ................................................ 4-1

Displaying the INSTALLATION Screen...... 4-2

Selecting the Correct Type of Satellite

Dish Antenna........................................ 4-2

Dish Type Selections................................. 4-2

Finding the Correct Antenna-pointing

Coordinates .......................................... 4-3

Pointing the Dish Antenna........................ 4-4

Testing Signal Strength ............................. 4-4

Local Providers......................................... 4-4

Local Provider Area Options.................... 4-5

System Test................................................ 4-5

Fine Tuning the Pointing of the Dish

Antenna ................................................ 4-6

Selecting Transponders............................. 4-6

Adding Terrestrial Antenna or Cable

to Your Satellite Connections .............. 4-7

Local In Connection Options .................... 4-7

Clear ......................................................... 4-8

Scan Channels........................................... 4-8

Testing the Strength of the Terrestrial

Digital Channels .................................. 4-8

Terrestrial Antenna or Cable without

a Satellite Connection .......................... 4-9

Local In Connection Options .................... 4-9

Scan Channels.........................................4-10

Selecting the Correct Satellite Dish

Type for Terrestrial-only

Operation ........................................... 4-10

Editing Local Channels .......................... 4-10

Time Setup................................................... 4-10

Installation Is Now Complete...................... 4-10

Watching Local Terrestrial and DIRECTV

Programming .......................................... 5-1

Types of Channels ......................................... 5-1

Analog (NTSC) Channels without Dish

Connection ........................................... 5-1

Analog (NTSC) Channels with Dish

Connection ........................................... 5-1

Digital (ATSC) Channels without Dish

Connection ........................................... 5-1

Digital (ATSC) Channels with Dish

Connection ........................................... 5-1

Local Channels from DIRECTV ............... 5-2

DIRECTV

Programming ........................ 5-2

Page vii

Mitsubishi SR-SD5 HD DIRECTV Plus Receiver

Basic Channel Changing ............................... 5-2

Channel Banner........................................ 5-2

The Information Banner ........................... 5-3

The OneLine™ Guide............................... 5-3

TurboTune™............................................. 5-3

AlphaTune................................................. 5-3

Alternate Services.......................................... 5-4

Audio......................................................... 5-4

Closed Caption ......................................... 5-4

Advanced Program Guide™ ........................... 6-1

Program Guide............................................... 6-1

PROGRAM GUIDE Screen ...................... 6-1

PROGRAM GUIDE Pop-up Menu ........... 6-2

Choosing the Guide Style.......................... 6-2

Descriptions.............................................. 6-5

Filtering the Guides ....................................... 6-5

Theme Filters ............................................ 6-6

Channel List.............................................. 6-6

Guide Times .............................................. 6-7

WATCHWORD™ ........................................ 6-7

WATCHWORD™ Entry ........................... 6-7

General On-Screen Guide Features ......... 6-7

The INFORMATION Screen........................ 6-8

Done.......................................................... 6-8

Show Times............................................... 6-8

SHOW TIMES Screen ............................... 6-8

Done.......................................................... 6-9

Video ......................................................... 6-9

Guides ....................................................... 6-9

PreSelect™ ............................................... 6-9

PreSelecting Programs from the

Advanced Program Guide™................ 6-9

PreSelecting Programs for Viewing....... 6-10

Canceling PreSelected Programs........... 6-10

HD Receiver’s Menu System........................... 7-1

Menu Overview......................................... 7-1

Main Menu .................................................... 7-2

Guide......................................................... 7-2

Video ......................................................... 7-2

Setup Menu.................................................... 7-2

Done.......................................................... 7-2

Video ......................................................... 7-2

Preferences .................................................... 7-3

Done.......................................................... 7-3

Video ......................................................... 7-3

Advanced................................................... 7-3

Preference Options ................................... 7-3

Channel Tags ............................................7-3

Scheme ...................................................... 7-3

Filters ........................................................7-4

Translucency .............................................7-4

Advanced Preferences.................................... 7-4

Done .......................................................... 7-4

Video .........................................................7-4

Advanced Preference Options...................7-4

Receiver ID ...............................................7-4

Channel Lock ............................................7-5

Factory Defaults .......................................7-5

Audio/Video Setup ........................................7-5

Audio ......................................................... 7-5

Dolby Digital............................................. 7-5

Closed Caption..........................................7-6

TV Resolution............................................7-6

Screen Ratio ..............................................7-6

Image Shape ..............................................7-6

Limits ............................................................. 7-8

Done .......................................................... 7-8

Video .........................................................7-8

TV Timer ...................................................7-8

Rating Help ...............................................7-9

Max Spending.......................................... 7-10

Channel Lists ...............................................7-10

Done ........................................................ 7-10

Video .......................................................7-11

AutoSet ....................................................7-11

Rename....................................................7-11

Clear........................................................7-11

Set............................................................7-11

Tag Boxes................................................7-11

TurboTune™................................................7-12

Done ........................................................ 7-12

Video .......................................................7-12

Set Channel ............................................. 7-12

Installation ...................................................7-12

VCR Setup ...................................................7-12

Brand.......................................................7-12

Code ........................................................7-13

Test (Record/Stop)...................................7-13

Scheduler .....................................................7-13

Done ........................................................ 7-13

Video .......................................................7-13

Event Scheduling Options .......................7-13

Editing an Event......................................7-14

Check Mail................................................... 7-15

Message...................................................7-15

Page ........................................................ 7-15

Erase .......................................................7-15

Page viii

Table of Contents

Purchases......................................................7-15

Done ........................................................7-15

Video........................................................7-16

History .....................................................7-16

Upcoming Purchases...............................7-16

Buy...........................................................7-16

Buy Options .............................................7-16

Cancel Purchase......................................7-16

Purchase History .....................................7-17

Caller ID.......................................................7-17

Call History .............................................7-17

Done ........................................................7-17

Video........................................................7-17

Disable.....................................................7-18

Call History .............................................7-18

Help .........................................................7-18

Lock/Unlock.................................................7-18

Locking Procedure ..................................7-18

Unlocking Procedure...............................7-19

Temporarily Overriding the Lock............7-19

Programming Your Remote Control.............. 8-1

Programming the Remote Control................. 8-1

Programming Mode.................................. 8-1

Code Scan ................................................. 8-1

Code Entry ................................................ 8-2

Using the Remote Control............................. 8-5

Changing the Remote Control

Address to Operate Other

HD Receivers ....................................... 8-5

Identifying Codes That Have Been

Stored ................................................... 8-5

Controlling Other Components Using

the AUX Button .................................... 8-6

Questions and Answers ................................... A-1

Special Information..........................................B-1

Special Information Concerning

Selected High Definition

Broadcasts ............................................B-1

Special Information Concerning

Stationary Images or Letterbox

Images ..................................................B-1

Page ix

A First Look at the HD System

Congratulations! You’ve selected one of the most advanced digital video and audio components available today. You now have the capacity to receive hundreds of channels of video programming and digital-quality audio.

What You Should Do First

Your HD system is both a sophisticated technical product and an easy-to-operate source of entertainment. You should complete the following steps to achieve the greatest performance from your system:

● Read this manual to familiarize yourself with the system.

● Install the HD receiver.

● Connect the terrestrial antenna or cable for local analog and digital channels.

● Install the DIRECTV PLUS™ antenna and cables. Professional installation is strongly

recommended.

● Align the satellite dish antenna.

● Arrange for programming from DIRECTV.

Page 1-1

Mitsubishi SR-HD5 HD DIRECTV Plus Receiver

The Broadcasting and Receiving network

How Does All This Work?

First, here is some information about your HD receiver. Your HD receiver can receive three types of television signals:

● Analog signals in NTSC (National Television Systems Committee—traditional TV sig-

nals) format—from terrestrial, or broadcasting towers built on earth, and cable sources.

● Digital signals in ATS C (Advanced Television Systems Committee—digital TV signals)

format—from terrestrial sources.

● Digital Satellite signals—from DIRECTV satellites in space. These signals can be either

Standard Definition (SD) signals or High Definition (HD) signals.

Second, here is some information about the broadcasting and receiving network shown.

Television stations, film studios, and other broadcasters send signals to earthbound terrestrial broadcasting towers and satellites. The tower shown on the right is sending Digital ATSC format signals and the more traditional Analog NTSC format signals. Both ATSC and NTSC signals can be received by the same VHF/UHF antenna normally mounted on a roof or in an attic. The satellites shown are sending DIRECTV programming signals which are received by a DIRECTV PLUS™ Satellite Dish Antenna usually mounted on a roof or on the ground. These satellites are located in geostationary orbit. Cable television signals are received through cables installed by cable television providers. The terrestrial broadcast (from a tower), satellite, and cable signals then go into your HD receiver where they are processed and sent to your television set.

Page 1-2

A First Look at the HD System

HD System Components

There are three main components of the HD system. They are the DIRECTV PLUS™ satellite dish antenna, the HD receiver, and the remote control.

The DIRECTV PLUS™ Satellite Dish Antenna

The satellite dish antenna is the component that receives the digital signals. It must be mounted to a solid outdoor surface that allows a clear view of the southern sky.

The large dish-shaped part is known as the reflector. The oval-shaped DIRECTV PLUS™ satellite dish antenna enables reception of DIRECTV High Definition Programming throughout the United States and local stations in specific cities. The dimenstions of the oval dish reflector are approximately 18 inches high by 24 inches wide.

Reflector

LNBs

LNB support arm

Mast

A Low Noise Block (LNB) Down Converter assembly is attached to the

Base plate

satellite dish antenna at the end of a tubular arm. Your assembly provides for receiving signals from multiple satellite orbit locations and distributing the signal

The satellite dish antenna parts. While your dish may vary

in appearance, the components are referred to using the

same names.

to the HD receiver and up to 3 more DIRECTV digital satellite receivers through the use of a multiswitch (not shown).

The mounting bracket and base plate make adjustments easy during installation. Once the satellite dish antenna has been properly positioned to point toward the satellites, you should never need to adjust it again.

Refer to the instructions included with the satellite dish for more details. Professional installation is strongly recommended.

Page 1-3

Mitsubishi SR-HD5 HD DIRECTV Plus Receiver

▲

The HD Receiver with DIRECTV PLUS™ Receiver Built-in

The HD receiver is one of the most compact available today. The basic features for setup, installation, and viewing programming can be accessed from the front panel keys.

POWER

INFO GUIDE SELECT

The front of the HD receiver

Your access card is located behind the door on the right side of the HD receiver. This special card contains information about your services. This card should not be removed except to protect the HD receiver from unauthorized use or to replace the card when DIRECTV supplies a new one.

The power key ( ) is used to turn the HD receiver on and off. The power light will

POWER

illuminate when the unit is on.

The information key ( ) is used to display descriptions of programs and channels on your

INFO

TV screen.

Pressing the ( ) key on the front panel will display the on-screen guide, where you can see a listing of all available programs. If the ( ) key is pressed while the program guide is already

GUIDE

displayed, the Guide Pop-Up menu will be displayed. The Guide Pop-Up menu provides access to the Main Menu or to the different program guide sorting options.

The four directional keys, up ( ), down ( ), left ( ), and right ( ), are used to move the highlight

▲

around the program guide and menus. Up and down keys also provide access to the OneLine™ Guide when menus aren’t displayed.

The select key ( ) is used to access a highlighted guide or menu item.

Page 1-4

SELECT

A First Look at the HD System

The rear of the HD receiver (power cord not shown)

The rear of the HD receiver has numerous jacks for connection to your audio/video entertainment system. You will also find the power cord permanently connected to the back.

The SATELLITE-IN F-type jack is for connecting the cable from your satellite dish antenna to the HD receiver. Be sure that you use RG-6 cable only. The SATELLITE-IN F-type jack can also accept a terrestrial analog or digital input when combined with the satellite signal using a diplexer.

Note: Refer to “HD Receiver and Satellite Dish Antenna with Terrestrial Antenna or Cable Service” in Chapter 2 for more information on using a diplexer. This is an advanced installation technique and professional installation is recommended.

The IN FROM ANT jack is for connecting a terrestrial analog or digital antenna to your HD receiver.

The OUT TO TV F-type jack is an RF output that you may connect to your standard definition (SD) TV or videocassette recorder (VCR) (depending on your entertainment system). Note that the CH3/CH4 switch enables you to select the channel on which HD receiver signals will appear. Select this channel on your TV or VCR to view or record these signals.

Three component signal output jacks Y (Luminance), P from Luminance), and P

(the amount of color Blue is different from Luminance) are connected

(the amount of color Red is different

to a High Definition (HD) monitor set to achieve highest quality video images. The output format is always 1080i.

The phono-type AUDIO output jacks, labeled and color-coded (L is white, and R is red) to indicate Left and Right, can be used for connection to your TV, VCR, or audio system. The phono-type composite VIDEO output jack is color-coded yellow and provides SD video signals. You may use this jack for connection to your TV or VCR. The multiple-pin S-VIDEO jack is for high-quality video output. Use this jack to achieve the clearest SD picture for your TV or VCR. The output format signals for RF, video, and S-video are always 480i.

The VCR CONTROL mini-jack is for connecting the VCR control cable that is included with the system. With this cable, the HD receiver can interface with most popular brands of VCRs to record selected programs automatically.

There is one DIGITAL AUDIO OUT connector which is OPTICAL. It provides signals for

connection to a Dolby

Digital decoder.

The RF REMOTE jack is used to plug in the RF receiver which came with your system. Connecting this receiver will allow you to operate the HD receiver from other rooms in your home when using the Whole House RF remote control.

The standard RJ-11 modular PHONE JACK is for connecting the HD receiver to your telephone line. This telephone connection is necessary to access certain program offerings such as Pay Per View. Telephone calls generated by the HD receiver are toll-free. The telephone line connection will not normally interfere with your telephone operation.

Page 1-5

Mitsubishi SR-HD5 HD DIRECTV Plus Receiver

POWER

▲

Note: The HD receiver will convert all video signals to High Definition (1080i format) and send these through the Y, P

, and Pb connectors. Also the HD

receiver will convert all video signals to Standard Definition (480i format) and send these through the OUT TO TV, VIDEO, and S-VIDEO connectors. When Standard Definition is being sent, the Y, P send any video. The HD receiver cannot send both HD and SD at the same time.

The Remote Control

Your HD receiver includes two remote controls, one same room Infrared (IR) remote and one Whole House RF remote control. The Whole House remote is also an IR remote. Also included is a RF receiver. With this combination of Whole House RF remote control and the remote control receiver you can have complete control of your HD receiver from other rooms in your house. Refer to “RF Remote Control Receiver” for instructions on setting up the RF receiver.

Each remote control can control your HD receiver and most TV brands, as well as VCRs and many other auxiliary devices such as cable boxes, amplifiers, and laser disc players.

, and Pb connectors will not

The mode keys across the top of the remote control enable you to specify the device you intend to control. This is important since many devices share the same keys, such as the key and the numeric keys. You must press the appropriate device key before

pressing a command key to make sure the remote control sends the right signal to the right device. The only keys that deviate

from this rule are the blue keys, as they are always associated with the HD receiver.

For the HD receiver only, the four directional keys will cause the on-screen highlight to move in the direction you want. The keys will be referred to as , , , and .

The select key ( ) is one of the most important keys. Pressing

SELECT

the key will tell the HD receiver that you wish to choose the

SELECT

▲

highlighted item.

The arch of keys above the directional keys control frequently used functions. These include special action ( ), information

INFO GUIDE EXIT FAV

( ), guide ( ), exit ( ), and favorite ( ) keys.

ACTI ON

The key is unique because it does nothing by itself. Pressing it displays the action icon in

ACTI ON

The remote control

the upper left corner of your screen for a few seconds. During that time, other keys may be pressed to access special functions indicated in yellow above the keys. Refer to the chart on the next page for a list of key functions.

ACTI ON

Page 1-6

A First Look at the HD System

SAT

The following chart describes the key functions for easy reference:

ACTI ON

Keys Label Feature

ACTI ON

FAV

–

INPUT

LIST Displays the CHANNEL LISTS screen

SERVICES Displays the Alternate Services menu

MOVIES Filters the on-screen guide to movies only*

SPORTS Filters the on-screen guide to sports only*

NEWS Filters the on-screen guide to news only*

ALPHA Select channel by call sign

HD/SD Switches the output of the HD receiver

between HD and SD** Also switches between the DTV (HD) input and INPUT 2 (SD) on Mitsubishi HD-upgradeable TVs.

ACTI ON

Changes display between FULL, CROPPED and LETTERBOX or SIDE PANELS.

* Pressing this sequence a second time will undo the respective filter. ** HD formatted video output (1080i) uses the Y, P

, and Pb jacks. SD formatted

video output (480i) uses the Video, S-video, and Out to TV jack. Note: The first time you turn your system on, the HD formatted video output is active. You may have to press the key followed by the key sequence twice

ACTI ON

INPUT

to get any picture. A complete explanation of switching from HD to SD can be found in the section “Now You Can Turn It On” on page 2–15.

The remaining keys are HD receiver-specific keys and common device keys, including numbers, channel up and down, etc. The functions of these keys change depending on the device currently selected.

Please refer to “Controlling the HD Receiver” in Chapter 3 for more remote control capabilities and “Programming Your Remote Control” in Chapter 8 for setting your remote control to handle other audio/video components.

Descriptions and details of each individual key will be given in the appropriate subsections throughout this manual.

Page 1-7

Mitsubishi SR-HD5 HD DIRECTV Plus Receiver

Installing the Remote Control Batteries

Before the remote control can be used, the two supplied batteries need to be installed. First, unsnap the battery cover from the back of the remote control. Install each fresh battery as shown, making sure that the + and – on each battery line up with the marks in the battery compartment. Next, snap the cover back onto the remote control.

Refer to “Programming Your Remote Control” in Chapter 8 for setting the codes to control the devices in your entertainment system.

Battery installation

Page 1-8

Setting Up Your HD Receiver

It is recommended that you have the satellite dish antenna professionally installed due to safety issues and electrical codes.

Note: If you should choose to install the dish antenna yourself, please pay special attention to the precautions in the front of this manual and refer to the installation instructions packaged with the satellite dish antenna. You can find information on using this HD receiver to point the dish antenna in Chapter 4, “Setting Up the Satellite Dish Antenna and Terrestrial Inputs.”

DANGER

To reduce the risk of fire or electrical shock, do not expose this apparatus to rain or moisture.

You may also want to obtain the Do-It-Yourself Installation Kit, sold separately.

This chapter provides step-by-step instructions for setting up your HD system and connecting it to your television or entertainment system.

The carton includes the HD receiver with DIRECTV PLUS™ receiver built-in, an access card (already installed in the HD receiver behind the door), single room IR and Whole House RF remote controls (batteries included), RF remote control receiver, cables, and the Owner’s Manual.

You now need to decide where you want to place the HD receiver. Choose a location near your TV where the power cord or cables will not be inadvertently disconnected.

CAUTION

Do not stack electronic components or other objects on top of the HD receiver. The slots on top of the receiver

must be left uncovered to allow proper airflow to the unit. Blocking the airflow to the unit could impair performance or damage your receiver. Also do not stack

the HD receiver on top of a “hot” component such as an audio power amplifier.

Page 2-1

Mitsubishi SR-HD5 HD DIRECTV Plus Receiver

Choosing the Best Connection for Your Entertainment System

There are a number of ways to connect the HD receiver, depending on the other audio/video equipment you wish to use. The simplest hookups are described in the following subsections.

The rear of the HD receiver (power cord not shown)

Before connecting the HD receiver to your entertainment system, you should connect the phone line. This can be done by plugging one end of the provided telephone cable into the PHONE JACK on the back of the HD receiver and the other end into a telephone wall jack. If you do not have a telephone jack within reach, you should move the HD receiver to be within

The phone line

and jack

reach of a telephone wall jack or have a new one installed.

To suit your specific needs, you may need to purchase additional connectors and/or cables from your dealer or electronic hardware store. Choose which hookup method to use based on:

● The capabilities of your TV and VCR.

● Your desire to receive local terrestrial analog and/or digital programming through the HD

receiver.

● Any other devices you want to include in the system (stereo, second VCR, etc.).

Before attempting to connect anything, position yourself so you are looking at the back of your components. Note the various input and output receptacles, their shapes, and how they are labeled. Then read through the rest of this connection subsection before going ahead with the actual hookup.

Note: For your safety, make sure the HD receiver, TV, VCR, and any other devices to be connected are unplugged from the power outlet while hooking them up.

Some of the connection methods described in this chapter may require optional cables or accessories that are not included with your HD receiver.

Page 2-2

Setting Up Your HD Receiver

HD Receiver and Satellite Dish Antenna with Terrestrial Antenna or Cable Service

Follow these steps indicated by the diagram below:

1) Connect the RG-6 Coaxial Cable from the satellite dish antenna to the back of the HD receiver using the connector marked SATELLITE IN.

Optional Hookup: If you plan to combine an outside terrestrial antenna with the signal from the satellite dish antenna, obtain a signal Diplexer* from your local retailer of satellite accessories. Connect the RG-6 Coaxial Cable from the satellite dish antenna to the “power pass” input of the Diplexer. Connect the output of the Diplexer to the back of the HD receiver at the connector marked SATELLITE IN.

* Note: It is very important that you use a Diplexer that is designed to combine

satellite signals and terrestrial signals. Standard signal combiners are not compatible.

2) Connect the cable from your terrestrial antenna or cable TV service to the HD receiver at the connection marked IN FROM ANT.

Optional Hookup: If you plan to record a terrestrial signal while watching satellite programming, or vice versa, connect the cable from your terrestrial antenna or cable TV service to the input of a standard two-way splitter as shown in the hookup diagram.

Page 2-3

Mitsubishi SR-HD5 HD DIRECTV Plus Receiver

Note: In order for the Advanced Program Guide™ to receive the correct listing of local channels and local program information from DIRECTV, make sure you select the correct zip code, cable provider (if connecting a cable TV service) and Area (if using a terrestrial antenna). Refer to Chapter 4, “Setting Up the Satellite Dish Antenna and Terrestrial Inputs.”

Using both the IN FROM ANT connector and the SATELLITE connector with a diplexer, you may connect one antenna and one cable TV service cable at the same time, however this HD receiver and the Advanced Program Guide™ cannot support two antennas connected or cable TV service connected in two places at the same time.

HD Receiver and HDTV Monitor

Follow these steps indicated by the diagram following this text.

1) Connect the satellite dish antenna and terrestrial antenna or cable service to the HD receiver following instructions in “HD Receiver and Satellite Dish Antenna with Terrestrial Antenna or Cable Service” on page 2-3.

2) Connect one set of Component Video Cables (one green Y connector, one red P tor, and one blue P marked Y, P

monitor using the HDTV input connections marked Y, P

Note: Connect the Y, P

, and Pb connectors on your TV that are compatible with HD signals in the

connector) to the back of the HD receiver using the connections

, and Pb. Connect the other ends of this cable to the back of the HDTV

, and Pb.

, and Pb connectors of the HD receiver only to the Y,

connec-

1080i scanning rate and that comply with the EIA 770.3 signal standards. Refer to your television owner’s guide for verification.

If you have one of the following models of Mitsubishi HD upgradeable TVs: VS-50800, VS-50803, VS-60803, VS-70803, VS-80803, WS-65903, or WS-73903, you will need to obtain a model RGB-CV10 signal adapter. This adapter will convert Y, P

, and Pb

signals to RGB H & V signals and is compatible only with selected Mitsubishi TVs. The adapter can be purchased at www.mitsubishi-tv.com or by calling 1-800-553-7278.

3) Connect one set of audio cables (one white left audio connector and one red right audio connector) to the back of the HD receiver using the connectors marked AUDIO L, R. Connect the other end of the audio cables to the back of the HDTV monitor using the audio inputs.

Note: This connection allows the use of the speakers in the TV to hear the sound.

4) Optional: Connect one set of audio cables and a video or S-video cable to the back of the HD receiver using the connectors marked AUDIO L, R and VIDEO or S-VIDEO.

Page 2-4

Connect the other end of audio and video cables to the back of the HD monitor using the AUDIO and VIDEO or S-VIDEO inputs.

Note: This connection allows you to send standard 480i signals to your TV. If you own a Mitsubishi HD upgradeable TV, select INPUT 2 for this connection.

For better standard definition performance, if your TV has an S-VIDEO connector, then use an S-video cable instead of the yellow video cable.

Setting Up Your HD Receiver

Note: When the HD receiver is converting all signals to standard 480i signals that can be viewed on standard video inputs of TVs, there will be no signals on the Y, P

, and Pb connectors. When the HD receiver is converting all signals

to 1080i that can be sent to the HDTV input of HD monitors, there will be no standard 480i signals to standard video inputs of TVs.

HD Receiver with HDTV Monitor and VCR

Follow these steps indicated by the diagram following this text.

1) Connect the satellite dish antenna and terrestrial antenna or cable service to the HD receiver following the instructions in “HD Receiver and Satellite Dish Antenna with Terrestrial Antenna or Cable Service” on page 2-3.

2) Connect one set of Component Video Cables (one green Y connector, one red P tor, and one blue P

connector) to the back of the HD receiver using the connections

connec-

Page 2-5

Mitsubishi SR-HD5 HD DIRECTV Plus Receiver

marked Y, Pr, and Pb. Connect the other ends of this cable to the back of the HDTV monitor using the HDTV input connections marked Y, P

Note: Connect the Y, P

, and Pb connectors on your TV that are compatible with HD signals in the

, and Pb connectors of the HD receiver only to the Y,

, and Pb.

1080i scanning rate and that comply with the EIA 770.3 signal standards. Refer to your television owner’s guide for verification.

, and Pb

signals to RGB H & V signals and is compatible only with selected Mitsubishi TVs. The adapter can be purchased at www.mitsubishi-tv.com or by calling 1-800-553-7278.

Note: This connection allows the use of the speakers in the TV to hear the sound.

4) Connect a set of audio and video or S-video cables to the second set of AUDIO L, R, and VIDEO or S-VIDEO connectors on the back of the HD receiver. Connect the other end to the AUDIO, VIDEO, or S-VIDEO input connections on the back of the VCR.

5) Connect another set of audio and video or S-video cables to the back of the VCR using the AUDIO and VIDEO output connection. Connect the other end of this cable to a group of standard AUDIO, VIDEO, or S-VIDEO input connections on the back of your TV.

Note: This connection allows you to send HD receiver signals, converted to standard 480i signals, to your VCR so they can be recorded.

You can see the playback of a video tape by selecting this input on your TV. You can also pass HD receiver signals, converted to standard 480i, through your VCR to your TV; however, you may need to turn on your VCR to pass these signals. If you are connecting to a Mitsubishi HD-upgradeable TV, select INPUT 2 to connect the output connectors of the VCR.

When the HD receiver is converting all signals to standard 480i signals that can be recorded by standard VCRs, there will be no signals on the Y, P

connectors.

, and

When the HD receiver is converting all signals to 1080i that can be sent to the HDTV input of the HD monitors, there will be no standard 480i signals to send to VCRs or standard video inputs of TVs.

For better performance, if both the TV and the VCR have S-video connectors, use S-video cables instead of standard yellow video cables.

Note: If you have connected a VCR into your entertainment system in a way that routes the cables from the HD receiver to your VCR before the signal reaches the TV, you may experience a distorted picture if you attempt to record a copy-protected program. These programs are identified by a “Can’t Tape” symbol in the banner area of the screen. If this occurs, simply stop the recording process and your picture will automatically correct itself.

Page 2-6

Setting Up Your HD Receiver

Page 2-7

Mitsubishi SR-HD5 HD DIRECTV Plus Receiver

HD Receiver and Standard Definition TV Monitor

Follow these steps indicated by the diagram following this text.

2) Connect one set of standard audio and video cables (one yellow video connector, one white left audio connector, and one red right audio connector) to the back of the HD receiver using the connectors marked AUDIO L, R and VIDEO. Connect the other end of the audio and video cable to the back of the TV monitor using the AUDIO and VIDEO inputs.

Optional: If your TV has an S-VIDEO input, then connect one end of an S-video cable to the back of the HD receiver using the output marked S-VIDEO. Connect the other end of the S-video cable to the back of the TV making sure to pair the S-VIDEO input with the previously used audio inputs. If you use an S-video cable, you will not need to use the yellow video cable.

3) Optional: If the TV does not have AUDIO and VIDEO input connectors, then connect one end of a coaxial RF cable to the OUT TO TV connector on the back of the HD receiver. Connect the other end of the coaxial RF cable to the antenna input connector on the back of the TV. Set the CH3/CH4 switch to the channel not used in your area. This is the channel you will select on your TV to view the HD receiver.

Note: 1) When the HD receiver is in standby (power LED off), the receiver will pass the signal received at the “In From Ant” connector out of the “Out To TV” connector unaltered. 2) When the HD receiver is turned on and set to the HD (1080i) output mode, the HD receiver will pass the signal received at the “In From Ant” connector out of the “Out To TV” connector unaltered.

3) When the HD receiver is set to the SD (480i) output mode, the channel the HD receiver has selected will be changed to channel 3 or 4 and sent out of the “Out To TV” connector. All other channels will be blocked.

Page 2-8

Setting Up Your HD Receiver

HD Receiver with Standard Definition TV Monitor and VCR

Follow these steps indicated by the diagram on page 2-11.

2) Connect one set of standard Audio and Video cables (one yellow video connector, one white left audio connector, and one red right audio connector) to the back of the HD receiver using the connectors marked AUDIO L, R and VIDEO. Connect the other end of the Audio and Video cables to the back of the TV monitor using the AUDIO and VIDEO input connectors.

Optional: For better performance, if your TV has an S-VIDEO input, then use an SVideo cable instead of a standard yellow Video cable.

3) Connect another set of standard Audio and Video cables to the back of the HD receiver using the connectors marked AUDIO L, R and VIDEO. Connect the other end of the audio and video cables to the back of the VCR using the AUDIO and VIDEO input connectors.

Page 2-9

Mitsubishi SR-HD5 HD DIRECTV Plus Receiver

4) Connect another set of standard audio and video cables to the back of the VCR using the AUDIO and VIDEO output connectors. Connect the other end of this cable to another group of unused input connectors on the back of the TV.

Note: There are possible variations to steps 2, 3, and 4 above. For example, if your TV or monitor has only one set of AUDIO and VIDEO input connectors, or if you have an S-VHS VCR, you may choose the following connection variation: Connect the AUDIO and VIDEO or S-VIDEO connectors of the HD receiver only to the VCR. Then connect the VCR output connectors to the TV. In this situation, you may need to turn on your VCR to pass HD receiver signals to your TV.

5) Optional: If the TV does not have AUDIO and VIDEO input connectors, then connect one end of a coaxial RF cable to the OUT TO TV connector on the back of the HD receiver. Connect the other end of the coaxial RF cable to the antenna input connector on the back of the VCR. Connect another coaxial RF cable to the antenna output connector on the back of the VCR and connect the other end of this cable to the ANTENNA or VHF input connector on the back of the TV. Set the CH3/CH4 switch on the HD receiver to the channel not used in your area. This is the channel you will select on your TV to view the HD receiver.

Page 2-10

Setting Up Your HD Receiver

Page 2-11

Mitsubishi SR-HD5 HD DIRECTV Plus Receiver

HD Receiver and Dolby® Digital Receiver or Decoder

Follow these steps indicated by the diagram below:

1) Connect an optical digital cable to the back of the HD receiver using the connector marked DIGITAL AUDIO OUT. Connect the other end of this cable to the optical input on the back of your Dolby Digital receiver or decoder.

2) Check the Owner’s Guide for the Dolby Digital receiver or decoder for proper set-up and operation.

AUDIO

LYL

VCR

PHONE JACK SATELLITE IN

REMOTE

VIDEO VIDEO

CONTROL

S-VIDEO

DIGITAL

AUDIO OUT

OUT TOTV

CH 3 CH 4

IN FROMANT

HD receiver

Optical digital cable

Amplifier with Dobly Digital (AC-3) processing

Home theate

Page 2-12

Setting Up Your HD Receiver

HD Receiver and Standard Stereo System

Follow these steps indicated by the diagram below:

1) Connect a set of stereo audio cables (one white left connector and one red right connector) to the back of the HD receiver using the connectors marked AUDIO L, R. Connect the other ends of the cables to the back of your stereo system using a set of AUDIO inputs. You may select any input except for the input marked PHONO, TT, or TURN- TABLE. Those inputs are for turntables only and will distort the sound from any other components.

Note: If you used both sets of connectors marked VIDEO and AUDIO L, R in connecting your TV or VCR you will have to replace one set of the AUDIO L, R connections as shown below.

AUDIO

LYL

VCR

REMOTEPHONE JACK SATELLITE IN

VIDEO VIDEO

CONTROL

S-VIDEO

DIGITAL

AUDIO OUT

OUT T O TV

CH 3 CH 4

IN FRO MA NT

HD receiver

Audio cable

L R

Stereo audio equipment

Finishing Up

You can mix and match the different hookups described herein to suit your entertainment system’s available connections. For example, you can connect the VCR using audio/video cables, while the TV is connected with the RF signal using a coaxial RF cable. Always try to achieve the highest quality audio and video and greatest flexibility possible.

Once all connections have been completed, plug in the TV, VCR, and HD receiver to the wall outlet. Use an appropriate extension cord or surge protector if necessary. See “Important Safety Instructions” described in the front of this manual.

Page 2-13

Mitsubishi SR-HD5 HD DIRECTV Plus Receiver

POWER

Connecting the VCR Control Cable

With the proper connections the HD receiver can control your VCR for unattended recording.

Note: The output of the HD receiver must be in SD mode

to record using the hookup configurations previously

The VCR Control

cable and jack

described in this chapter.

Finding the VCR’s Remote Control Sensor

Plug the VCR control cable into the back of the HD receiver. So that the HD receiver can control your VCR, the emitter end of the VCR control cable must be attached where the VCR’s remote control sensor is located. This is labeled on some VCRs. You may also find a diagram in your VCR manual indicating the sensor position. It is commonly identifiable by a small dark plastic window. For reference, see the sensor on the HD receiver located behind the door.

If the sensor is not labeled or documented, you will need to scan the front of your VCR with your VCR remote control. Use the following procedure to accomplish this:

● Hold the VCR remote control about ½-inch

from the front left side of your VCR.

● Slowly move the remote control to the right repeatedly pressing the remote control’s

POWER

key on and off.

Look for indications of the remote control

sensor

Scanning for the remote control sensor

● Once the VCR responds to pressing the key on the remote control, note the posi-

tion of the remote control. This should indicate the location of the VCR remote control sensor.

Once the sensor position has been determined, temporarily attach the emitter to the area with a piece of tape until the system can be tested. Refer to the “VCR Setup” subsection in Chapter 7, “HD Receiver’s Menu System,” to program and test the VCR control feature.

Upon verifying that the VCR control is functioning properly, you can remove the tape and permanently attach the emitter using the peel-and-stick backing. This attachment should not interfere with normal VCR operation.

RF Remote Control Receiver

Your HD receiver includes a Whole House RF remote control and RF remote control receiver. With this combination you can have complete control of your HD receiver from other rooms inside your house. The Whole House RF remote control emits a powerful radio signal that is then broadcast up to a distance of 100 feet to the RF remote control receiver. No tools are needed to install the RF remote control receiver. The range of the Whole House RF remote control is a maximum of 100 feet, however weakened batteries and some building materials in walls, floors, and ceilings may reduce this range.

Page 2-14

Setting Up Your HD Receiver

ACTI ON

INPUT

Connecting the RF Remote Control Receiver/ Antenna

You can place the RF remote control receiver base behind the HD receiver or hidden elsewhere out of view.

Plug the RF remote control receiver cable into the RF REMOTE connector on the rear of the HD receiver. Extend the cable and place the antenna in the desired location. To achieve the best operating range from the remote control, the antenna should be placed as high and as far away from metal objects as possible.

This completes the installation. Go to the location where you would like to use the remote control and try it. If you experience any problems, verify that the batteries are strong and you are within operating range. If you continue to have problems, try repositioning the RF remote control receiver.

Setting the Address of Your HD

Whole House RF remote control receiver

Receiver and Remote Control

To avoid interference between your remote control and neighbors who may have a similar model remote control, you should change the remote control broadcast address of your remote controls and HD receiver. This is similar to choosing a channel on a cordless phone so that you and your neighbors don’t hear each other’s conversations.

See Chapter 7, “HD Receiver’s Menu System, Advanced Preferences, Receiver ID,” for instructions on changing the remote control address for the HD receiver.

See Chapter 8, “Programming Your Remote Control, Using the Remote Control,” for instructions on changing the remote control address.

Now You Can Turn It On

Once you have connected everything, you can begin powering up the components. Turn the TV on and set it to the HD input, VIDEO or S-VIDEO, or the HD receiver’s output channel (3 or 4). Do the same for the VCR, if applicable. Now turn the HD receiver on. You will see the start-up screen for several seconds.

Note: The HD receiver VIDEO output defaults to the Y, P connectors when first used. If you are not using an HDTV monitor, or prefer to use the standard video outputs, try switching the outputs of the HD receiver from HD to SD. Using the remote control, press the button once, then press the button, followed by the button. Pressing this sequence

INPUT

SAT

of keys will switch the receiver between the High Definition (1080i) output mode and the Standard Definition (480i) output mode. Following one or more of this sequence, your picture should appear.

ACTI ON

, and Pb HD

If you have a Mitsubishi HD-upgradeable TV, this same sequence of buttons will also switch between viewing the DTV (HD) input and INPUT 2 (SD) inputs of the TV.

Page 2-15

Mitsubishi SR-HD5 HD DIRECTV Plus Receiver

POWER-ON Screen

As power is applied to the HD receiver for the first time after being plugged in or after a power failure, the POWER-ON screen, shown on the right, is displayed. The screen will not appear each time you press the Pow er button.

A panel will display an Exit and an Installation button. Below that, a progress meter will display illuminated boxes, which will progressively light up from left to right as the system powers up.

Exit

The POWER-ON screen

Highlighting the Exit button on the screen and pressing

SELECT

the key on the remote control causes an exit from the POWER-ON screen and interrupts the Guide data acquisition.

Installation

If the power is on, but the satellite dish antenna or local area antenna or cable system inputs are not yet installed, highlighting the Installation button and pressing the key on the remote control will display the INSTALLATION screen. Read Chapter 4 for installation and testing instructions.

If the satellite is properly pointed, the program guide is loaded when power is applied. You can exit out of this start up process, but you would not load the current guide data. Allow time for this program data to load.

Note: If your satellite dish is properly pointed and receiving a signal, this bootup process is necessary to completely load the Advanced Program Guide™ information. If you exit this screen before it is complete, or have yet to install the satellite dish, this process will take place later. Loading Advanced Program Guide™ data can take several minutes.

If you are using the HD receiver with only the terrestrial antenna or cable signal, you can immediately exit this screen.

SELECT

Page 2-16

Controlling the HD

▲

Receiver

Now it’s time for you to take control. Take a few minutes to read through this chapter to understand how to operate your system. Let’s begin with a couple of simple rules. First, there is nothing that you can do, using the front panel keys or the remote control keys, which could harm the HD receiver in any way. Once you understand the capabilities and options available in your receiver, you’ll be able to undo any changes or settings that you make.

It is not necessary to know everything your system can do right away. As you use the HD receiver, the techniques necessary to control it will become second nature.

Front Panel vs. Remote Control Keys

The front panel provides all the basic controls needed to access and use the primary features of the HD receiver. The remote control has additional keys to provide shortcuts or access to extended features of the HD receiver. Most of the remote control keys can also be used to control other components in your entertainment system. For this reason, you must remember to press the

SAT

key, putting the remote control in HD receiver mode, when you want to control the HD

receiver.

Basic Navigation

The most common HD receiver-related keys that you will use are , , , , and . Four distinct keys on the HD receiver front panel represent the direction keys. On the remote control, the direction keys are represented by the top, bottom, left, and right keys surrounding the key. These keys are primarily used to move the highlight (also known as a cursor) around the screen. Press the key to activate a highlighted item.

Another key you will be using frequently is the key, located on both the front panel of the HD receiver and on the remote control. This key is used when you want to display the current onscreen guide. Once you are in the guide, pressing the key while a program title is highlighted will display the Guide pop-up menu.

Another key appearing on both the front panel and the remote control is the key. This key is used to retrieve descriptive information about a currently airing event and to provide access to scheduling information (and purchasing information for pay per view) about highlighted programs in the on-screen guide.

The final key that appears on both the remote control and the front panel is the key. Make sure the remote control is in “SAT” mode for the key to control the HD receiver. When you turn the HD receiver off, it has not actually stopped using electricity. Rather, it goes into a standby mode that enables it to continue monitoring data sent from DIRECTV, call in status reports to DIRECTV, start and stop your VCR for programs you have scheduled, receive messages, and perform other background activities.

SELECT

GUIDE

POWER

▲

SELECT

INFO

POWER

Page 3-1

Mitsubishi SR-HD5 HD DIRECTV Plus Receiver

EXIT

There are two keys on your remote control that most people use frequently. They are the and the keys.

EXIT

FAV

After you have established favorite channel lists, as described in Chapter 7, “HD Receiver’s Menu System,” you can use the key to cycle through them quickly and easily. Each press of the key will advance to the next list of channels. After stepping through the favorite

FAV

lists, it will cycle back to “All Channels.”

At any time, you can exit the on-screen guide by selecting Video in the Guide pop-up menu. An even faster way is to press the key. The key also clears all inputs and menus, and

EXIT

returns to the program you were watching.

Page 3-2

Setting Up the Satellite Dish

Antenna and Terrestrial Inputs

There is a cluster of DIRECTV satellites in space, and, just as a telescope is pointed at a star, you need to point your satellite dish at the satellites. In this chapter, we will explain how to configure your receiver for your satellite dish antenna, where to point your satellite dish antenna, and how to configure your receiver for analog or digital terrestrial (broadcast or cable) reception.

It is recommended that you have the satellite dish and terrestrial antennas professionally installed. If you choose to install the antennas yourself, please pay special attention to the precautions in the front of this manual and refer to the installation instructions packaged with the satellite dish antenna.

Your satellite dish antenna will need to be pointed at a satellite cluster located 22,300 miles in orbit above the equator. To aim the satellite dish antenna at the satellites, you need to know the azimuth, elevation, and tilt angles. The HD receiver will assist you in determining these angles.

Set-up of the satellite dish antenna and terrestrial inputs will be explained in three parts:

1) Installing and testing the satellite dish antenna by itself first.

2) Setting up and testing terrestrial or cable inputs.

3) Setting up and testing terrestrial or cable inputs by themselves, without a satellite dish antenna.

Installing and Testing the Satellite Dish Antenna

Installing your dish antenna involves four separate steps:

● Selecting the correct type of satellite dish antenna.

● Finding the correct dish antenna pointing coordinates.

● Pointing the dish antenna.

● Testing the strength of the satellite signal.

Page 4-1

Mitsubishi SR-HD5 HD DIRECTV Plus Receiver

▲

SELECT

▲

Displaying the INSTALLATION Screen

Highlighting the Installation button on the POWERON screen (explained on page 2-15) and pressing the

SELECT

key on the remote control will display the

INSTALLATION screen shown on the right.

If this is not the first time the HD receiver is turned on after being plugged in, follow these steps:

● Open the MAIN MENU screen by pressing

ACTI ON

the key followed by the key on the remote control.

GUIDE

● Using the and keys, highlight the Setup

Menu Button then press the key on

SELECT

The INSTALLATION screen

the remote control to display the SETUP menu.

● Using the and keys, highlight the Installation Button then press the key on the

SELECT

remote control to display the INSTALLATION screen.

Selecting the Correct Type of Satellite Dish Antenna

You need to select the correct type of dish antenna that you have connected, so that the HD receiver can calculate the correct coordinates for pointing the dish antenna.

Highlighting the Dish Setup button on the INSTALLATION screen and pressing the key on the remote control will display the DISH SETUP screen. Highlighting the Dish Type button on the DISH SETUP screen and pressing the key on the remote control will display the DISH TYPE pop-up menu. Press the and keys to highlight the type of dish antenna that is connected to the HD receiver and then press the key.

Dish Type Selections

Note: You must select the correct dish antenna type to obtain correct pointing results.

SELECT

The DISH SETUP pop-up menu

These are the following dish antenna type selections:

None Highlight this selection if you are not connecting a dish antenna, but are

connecting a terrestrial antenna or cable signal.

Round Dish Highlight this selection if you connected an 18" round dish antenna. This

setting allows the HD receiver to receive a signal from the main satellite, located at 101°.

Note: A round dish antenna will not receive High Definition satellite signals from DIRECTV.

Page 4-2

Setting Up the Satellite Dish Antenna and Terrestrial Inputs

▲

Oval Dish 2 Highlight this selection if you connected a DIRECTV PLUS™ oval dish

antenna with two LNBs. This setting allows the SR-HD5 receiver to receive signals from Satellite A at 101° and Satellite B at 119°, enabling reception of DIRECTV High Definition programming throughout the United States as well as local stations in specific cities. Most users will have this type of dish.

Oval Dish 3 Highlight this selection if you connected a DIRECTV PLUS™ oval dish

antenna with the optional Satellite C LNB kit purchased separately from your local satellite system installer. This setting allows the SR-HD5 receiver to receive signals from Satellite A at 101°, Satellite B at 119°, and Satellite C at 110°, enabling the reception of local stations in additional specific cities in the United States.

Cancel Highlight this selection to return to the DISH SETUP screen without making

a dish antenna type selection.

Highlighting a selection button as explained immediately above and pressing the key on

SELECT

the remote control will confirm the selection and return to the DISH SETUP screen.

Finding the Correct Antenna-pointing Coordinates

The POSITION pop-up menu will provide you with the correct coordinates to point your dish antenna. This is important to receive all of the channels you are entitled to when you subscribe to DIRECTV.

Highlighting the Position button on the DISH SETUP menu and pressing the key on the remote control will display the POSITION pop-up menu. Using the and keys, and highlighting either the ZIP Code or Latitude/Longitude button and pressing the key on the remote control will display the corresponding pop-up menu.

To select a digit, use the number keys or the and keys on the remote control to enter your ZIP Code or Latitude and Longitude. After the last number has been entered, highlight the OK button and press the key on the remote control to confirm the entry. The RESULTS screen will

SELECT

display. Highlighting the cancel button and pressing the key on the remote control will return to the DISH SETUP menu.

SELECT

The ZIP Code pop-up menu

SELECT

Page 4-3

Mitsubishi SR-HD5 HD DIRECTV Plus Receiver

SELECT

▲

SELECT

Pointing the Dish Antenna

The HD receiver will calculate the correct pointing coordinates and then display this information on the RESULTS screen shown on the right. Write down this Elevation, Azimuth, and Tilt information. Then highlighting the OK button and pressing the key on the remote control will return to the DISH

SETUP Menu. Use the coordinates from the RESULTS screen to point your dish antenna at the

sky. The separate installation instructions that come with the dish antenna will explain exactly how to use the Elevation, Azimuth, and Tilt information.

Note: The round dish has no tilt information.

Testing Signal Strength

The INSTALLATION screen shown at the right will display the strengths of signals from the different satellites and the transponders on each satellite. The screen displays a numerical strength indication and a bar graph accompanied by an audible tone to indicate signal strength. The higher the number, the greater the amount of the bar graph occupied, or the faster the beeping tone, the stronger the signal.

The RESULTS screen

You should test the signals from each of the satellites that match the type of dish that you selected on the DISH TYPE screen.

The INSTALLATION screen

Highlighting the Source button on the INSTALLATION screen and pressing the key

SELECT

on the remote control will display the Signal Source pop-up menu shown at the right. Highlighting the

Satellite A (101°), Satellite B (119°), Satellite C (110°),

or Local Digital Terrestrial and pressing the key on the remote control will return to the INSTALLATION screen and show the signal strength for the selected source.

Local Providers

The Signal Source screen

The LOCAL PROVIDERS screen allows DIRECTV to add local channels to the Advanced Program Guide™ in the same way that it lists satellite program information.

Highlighting the Dish Setup button on the INSTALLATION screen and pressing the key

SELECT

on the remote control will display the DISH SETUP screen. Using the and keys, highlight these Local Provider area options and press the key on the remote control.

Page 4-4

Setting Up the Satellite Dish Antenna and Terrestrial Inputs

Local Provider Area Options

Area 1 You have connected a standard VHF/UHF antenna for receiving your primary

analog and digital terrestrial signals. The ZIP Code entered here will specify what terrestrial program information should appear in the Advanced Program Guide™.

Area 2 Area 2 may be a neighboring city or distant terrestrial station you wish to

receive from the same VHF/UHF antenna used in Area 1. The ZIP Code entered here will specify what terrestrial program information should appear in the Advanced Program Guide™.

Cable TV You have connected a cable television service. The cable provider entered

here will specify what cable program information should appear in the onscreen program guide.

System Test

The SYSTEM TEST screen will display the signal strength of all of the transponders on the satellite that have been selected on the Signal Source pop-up menu. It will also indicate the quality of the signal transfer between the dish antenna and the SR-HD5 receiver. The SYSTEM

TEST Menu offers the following options:

Begin Test Starts the receiver test, which provides basic status information about the

receiver. The test may take up to one minute.

Cable Test Tests and displays indicators of all transponder signals from the satellite

chosen by the Source pop-up menu.

Upgrade Checks the status of software upgrades that DIRECTV periodically performs.

Highlighting the System Test button on the INSTALLATION screen and pressing the key on the remote control will display the SYSTEM TEST screen. Using the and keys, highlight either the Begin Test or Cable Test button and press the key on the remote control. After a

SELECT

▲

SELECT

▲

short period of time, the results of the test will be displayed.

You should perform the cable test for each of the satellites supported by the dish antenna you selected in the DISH TYPE screen. If you are setting up your system to receive signals from Satellites B (110°) and C (119°), you will need to change source satellites between each Cable Test.

Note: Not all of the transponders on Satellites B (119°) and C (110°) are currently being used. On Satellite B, for example, you may receive NA (Not Available) indications for several transponders. This is normal.

The SYSTEM TEST screen

Page 4-5

Mitsubishi SR-HD5 HD DIRECTV Plus Receiver

When you have received a strong signal from several transponders on each of the satellites you are setting up, you have completed the setup for digital satellite channels. A numeric value for the signal strength ranges from 0 to 99. While your signal strength may vary, refer to the following map to determine the suggested signal strength for your area:

70s

80s

90s

Typical signal strength results. Your actual signal strength may vary.

Check to see if you are receiving the DIRECTV Promotional Channel on Channel 100. If you are receiving that channel, you can now telephone 1-800 DIRECTV to subscribe to DIRECTV Programming®. If you have difficulties receiving a strong signal on one individual satellite, the pointing of the dish antenna will need fine tuning.

Fine Tuning the Pointing of the Dish Antenna

It often takes two people to fine tune the pointing of the dish antenna. One person watches the signal strength indicator on the INSTALLATION screen and relays the information to another person who is adjusting the dish antenna. To fine tune the pointing of the dish antenna, you will need to select a satellite on the Source pop-up menu. Then select one or more transponders from that satellite by using the XPONDER pop-up menu. Once the pointing of the dish antenna has been fine tuned to receive a strong signal from Satellite A (101°) and Satellite B (119°), the pointing of the dish antenna at Satellite C (110°) should be correct.

Selecting Transponders

The XPONDER pop-up menu will display the signal strength from individual transponders on each of the satellites. A transponder is a group of circuits on the satellite that transmits the satellite channels. There are numerous transponders on each satellite; however, not all of the transponders will be in use. All of the transponders on Satellite A will provide some signal strength indication. But not all the transponders on Satellites B and C may be fully utilized at this time.

To check the signal strength of individual transponders, first select the satellite using the Source pop-up menu. Then highlighting the Xponder button on the INSTALLATION screen and pressing the key on the remote control will display the XPONDER pop-up menu. Use the

Page 4-6

SELECT

Setting Up the Satellite Dish Antenna and Terrestrial Inputs

▲

and buttons to select different transponders. Observe the signal strengths of the different transponders. Adjust the dish antenna to improve the signal strengths. After fine tuning, highlighting the Done button and pressing the key on the remote control will display the INSTALLATION screen. Highlighting the Video button and pressing the key or pressing

EXIT

the key on the remote control will display the channel last viewed.

SELECT

Adding Terrestrial Antenna or Cable to Your Satellite Connections

If you connected a terrestrial antenna or local cable TV service to view local analog or digital channels, you need to configure the HD receiver to receive those broadcasts.

Highlighting the Local Area button on the INSTALLATION screen and pressing the key on the remote control will display the LOCAL AREA screen shown at the right. Using the and , highlight either the Local In 1 button if you connected your terrestrial antenna or cable service to the jack labeled IN FROM ANT, or highlight the Local In 2 button if you connected the jack labeled SATELLITE IN and used a Diplexer to combine your terrestrial antenna cable with the cable from the satellite dish antenna. Then press the key on the remote control to display the Local In pop-up menu.

SELECT

The LOCAL AREA screen

On the Local In pop-up menu, use the and keys to highlight the buttons for the type of antenna or cable you connected to the HD receiver, and then press the key on the remote

SELECT

control.

Local In Connection Options

The connection options found on the Local In 1 and Local In 2 pop-up menus are:

None You are not connected to an antenna

or cable.

Antenna You have connected a standard

VHF/UHF indoor or outdoor antenna.

Cable TV (STD) You have connected a cable service

that uses a standard type of cable signal.

Cable TV (HRC) You have connected a cable service that uses the HRC type of cable signal.

Cable TV (IRC) You have connected a cable service that uses the IRC type of cable signal.

Note: Consult your cable company to find out what type of cable signal you have.

Note: Local In 1 and Local In 2 must have different input signal types. The receiver does not support the simultaneous connection of two terrestrial antenna signals or two cable signals.

Local In 1 pop-up menu

Page 4-7

Mitsubishi SR-HD5 HD DIRECTV Plus Receiver

▲

▲▲▲

▲

After selecting your Local In connection and pressing the key on the remote control, the

SELECT

LOCAL AREA screen will be displayed.

Clear

Remove all the check marked channel numbers from the local Area screen.

Scan Channels

This option will automatically scan through all of the possible channels and place the active channel numbers into the Advanced Program Guide™ grid. NTSC (analog) channels will be listed by their normal one- or two-digit Channel Number. ATSC (digital) channels will be listed by the Channel Number followed by a hyphen and a number other than zero. An example of an ATSC channel would be 23-1. At this time, the program information for local NTSC and ATSC channels that is shown on the Advanced Program Guide™ will simply display “Regular Schedule.” To receive accurate program information for these channels, you need to select a local cable provider or enter area ZIP Code on the DISH SETUP screen.

Testing the Strength of the Terrestrial Digital Channels

The INSTALLATION screen will display the strengths of signals from the terrestrial digital channels. The screen displays a numerical strength indication and a bar graph accompanied by an audible tone to indicate signal strength. The higher the number, the greater the amount of the bar graph occupied, or the faster the beeping tone, the stronger the signal.

You should test the signal strength of each digital channel by “physical” Channel Number, not by “virtual” Channel Number. The “physical” Channel Number is the channel number that the FCC uses to

The INSTALLATION screen

identify the channel frequency, and it is a one-digit or two-digit number. The “virtual” Channel Number is the number that a local broadcast station wishes to use to identify itself. For instance, if the number for your local CBS analog channel is 2 (Channel 2), then that station may use 2-1 as a digital “virtual” Channel Number, even though the “physical” number assigned by the FCC to that channel is 40.

To test the strength of terrestrial digital channel signals, highlighting the Source button on the INSTALLATION screen and pressing the key on the remote control will display the

SELECT

SOURCE pop-up menu. Using the and keys to highlight the Local Digital button on the pop- up menu and pressing the key on the remote control will display the LOCAL DIGITAL

SELECT

Signal Strength Screen. Use the and keys on the remote control to move to the column on the left and use the and to highlight the Channel button. Press the key on the remote

SELECT

control to display the CHANNEL pop-up menu.

If you know the “physical” numbers for your local channels, use the number buttons on the remote control to select each channel number, and observe the signal strength. If you do not know these “physical” channel numbers, use the and keys on the remote control to change the channel one number at a time. Channels with a signal strength of less than 60 may require a better antenna, adjustment of the antenna angle, or the antenna may be too far away from the signal source.

Page 4-8

Setting Up the Satellite Dish Antenna and Terrestrial Inputs

▲

After fine-tuning, highlighting the Done button and pressing the key on the remote control will display the INSTALLATION screen. Highlighting the Vide o button and pressing the

SELECT

key on the remote control will display the channel last viewed. You may also use the Exit key on the remote control to exit all menus and return to the last viewed channel.

Terrestrial Antenna or Cable without a Satellite Connection

If you connected a terrestrial antenna or local cable TV service to view local analog or digital channels, you need to configure the HD receiver to receive these broadcasts.

Highlighting the Local Area button on the INSTALLATION screen and pressing the key on the remote control will display the LOCAL AREA screen. Using the and keys, highlight either the Local In 1 button if you connected your terrestrial antenna or cable service to the jack labeled IN FROM ANT. Or, highlight the Local In 2 button if you connected your terrestrial antenna to the jack labeled SATELLITE IN. Then press the key on the remote control to

SELECT

display the Local In pop-up menu.

On the Local In pop-up menu, use the and keys to highlight the buttons for the type of connection made to the HD receiver, and then press the key on the remote control.

SELECT

Local In Connection Options

The connection options found on the Local In 1 and Local In 2 pop-up menus are:

SELECT

None You are not connected to an antenna or cable.

Antenna You have connected a standard VHF/UHF indoor or outdoor antenna.

Cable TV (STD) You have connected a cable service that uses a standard type of cable signal.

Cable TV (HRC) You have connected a cable service that uses the HRC type of cable signal.

Cable TV (IRC) You have connected a cable service that uses the IRC type of cable signal.

Note: Consult your cable company to find out what type of cable signal you have.

After selecting your Local In connection and pressing the key on the remote control, the

SELECT

LOCAL AREA screen will be displayed.

Note: Local In 1 and Local In 2 must have different input signal types. The receiver does not support the simultaneous connection of two terrestrial antenna signals or two cable signals.

Page 4-9

Mitsubishi SR-HD5 HD DIRECTV Plus Receiver

▲

SELECT

▲

Scan Channels

This option will automatically scan through all of the possible channel frequencies and place the active channel numbers into the program guide grid. NTSC (analog) channels will be listed by their normal one or two Channel Number. ATSC channels will be listed by their one or two digit main channel number followed by a hyphen and a number of 1 or greater. At this time, the program information for local NTSC and ATSC channels that is shown on the program guide will simply display “Regular Schedule.” To receive accurate program information for these channels, you need to

Channel Scan

connect to a satellite dish and download this information from DIRECTV.

Selecting the Correct Satellite Dish Type for Terrestrial-only Operation

If you have a terrestrial-only antenna hookup (that is, no satellite dish), you must configure the SR-HD5 receiver for a dish type of “None” so it will not search for a satellite signal.

Highlighting the Dish Setup button on the INSTALLATION screen and pressing the key

SELECT

on the remote control will display the DISH SETUP screen.

Highlighting the Dish Type button on the DISH SETUP screen and pressing the key on the

SELECT

remote control will display the DISH TYPE pop-up menu. Using the and keys, highlight dish type “None” and press the key.

SELECT

Editing Local Channels

To remove or add local NTSC analog and ATSC digital channels in the channel list, use the and

keys to highlight the specific channel. Press to remove the checkmark and the channel

from the channel list. Press again to add it back.

SELECT

Time Setup

You can set the current time and day, the current date, the time zone, and whether or not you observe daylight saving time. This option is only available if you have selected NONE as your DISH TYPE.

Use the and buttons to move around the TIME SETUP screen, then press SELECT to select an item, and you can use your remote control to enter numbers.

When you subscribe to DIRECTV, the time will be automatically set and you cannot reset it. You can, however, reset the time zone and whether you observe daylight saving time.

Time Setup screen

Installation Is Now Complete

The installation and testing of the satellite dish antenna and/or terrestrial inputs is now complete. You are ready to enjoy your system.

Page 4-10

Watching Local Terrestrial and

DIRECTV

Programming

Types of Channels

This chapter will reveal many different ways to find programs you want to watch. The first thing you should know is how channels in the DIRECTV Advanced Program Guide™ are arranged.

Analog (NTSC) Channels without Dish Connection

Analog (NTSC) channels received by terrestrial antenna or cable service when a dish antenna has not been connected will be listed by their traditional single- or double-digit Channel Number. The program information will simply state “Regular Schedule.”

Analog (NTSC) Channels with Dish Connection

Analog (NTSC) channels received by terrestrial antenna or cable service when a dish antenna has been connected will be listed by their traditional single- or double-digit Channel Number and the station’s call letters or network logo. The program information area will display the program name and description if this channel is supported for your zip code area.

Digital (ATSC) Channels without Dish Connection

Digital (ATSC) channels received by a terrestrial antenna or cable service when a dish antenna has not been connected will be listed by a single- or double-digit Channel Number followed by a hyphen and a Sub-channel Number of 1 or greater; for examples: 23-1 or 23-2. The main Channel Number can be either the “physical” Channel Number assigned to the broadcast frequency by the FCC or a “virtual” Channel Number assigned by the broadcast station. The type of number, “physical” or “virtual,” depends on information sent by the broadcaster. The channel call letters or network name may also be included by the broadcaster. The program information will simply state “Regular Schedule.”

Digital (ATSC) Channels with Dish Connection

Digital (ATSC) channels received by a terrestrial antenna or cable service when a dish antenna has been connected will be listed by a single- or double-digit Channel Number followed by a hyphen and a Sub-channel Number of 1 or greater; for examples: 23-1 or 23-2. The main Channel Number can be either the “physical” Channel Number assigned to the broadcast frequency by the FCC or a “virtual” Channel Number assigned by the broadcast station. The type of number, “physical” or “virtual,” depends on information sent by the broadcaster or DIRECTV. The program information area will display the program name and description if this channel is supported for your zip code area.

Page 5-1

Mitsubishi SR-HD5 HD DIRECTV Plus Receiver

Local Channels from DIRECTV

Local channels from DIRECTV, when available and subscribed to, will be listed as traditional channel numbers along with the network logo or call letters.

DIRECTV® Programming

DIRECTV programming will be listed with network logo and channel numbers 100 to 9999. For example, the DIRECT TICKET™ movie preview channel is channel 100.

Basic Channel Changing

There are many ways to “surf” (move from channel to channel) through the available programming. You already know two ways to change channels. The first of these is by using the

and keys on the remote control. Each key press takes you to the next available channel

in the direction that you selected.

The second way is to enter the Channel Number of the desired channel. For example, to go to the DIRECT TICKET movie preview channel, press on the remote control.

1 0

Note: if the channel does not change right away, press the key on the

SELECT

remote control to instruct the HD receiver that you have finished entering channel number digits.

You can enter the number for any channel that you wish.

To select a terrestrial ATSC (digital) channel, enter the main channel number followed by the hyphen key, then the sub-channel number, and then press the key on the remote

— SELECT

control.

Channel Banner

Every time you select a channel while you are watching TV, a Channel Banner, such as that shown to the right, will be displayed at the top of the screen. You can also display the banner by pressing the key on the remote control or on the front panel of the receiver. This banner also displays channel-related symbols where applicable. These symbols are shown below.

The following icons may be displayed on the channel banner. Subsequent sections will explain how to access these features.

INFO

The CHANNEL BANNER screen

Icon ALT.

Meaning Pay Per

View

Page 5-2

AUDIO

Other audio

available

Closed caption

available

NEW

MAIL

Unread mail Limits

enforced

Limits over-

ride

CAN’T

TA PE

Taping not

allowed

Dolby

Digital

audio

available

Watching Local Terrestrial and DIRECTV® Programming

EXIT

▲

—

The Information Banner

Pressing the key on your remote control or the front panel while the Channel Banner is displayed will add a description of the current program. This is called the Information Banner. Either of these banners will go away after a few seconds, or you can press the key for the second time or the key to clear them.

INFO

The OneLine™ Guide

If you’d like to know what’s on another channel without switching from your current channel, use the OneLine Guide. Simply press or to begin browsing. You can see the channel call sign and number, logo, and program title(s). When you see something you like, then press

SELECT

to tune to the channel.

The CHANNEL BANNER with description

You may also directly enter a channel number to advance the OneLine Guide to that channel. The other filter

ACTI ON

keys, including for movies, for sports, and for news, as well as the key

ACTI ON

3 FAV

ACTI ON

will also control the content of the OneLine Guide.

Pressing the key will cancel the OneLine Guide.

EXIT

TurboTune™

The Turb oTu ne feature provides access to nine of your preferred channels on top of the current video. The TurboTune panel is displayed by pressing the remote control key while watching the video as long as there are no messages prompting you to press for some other purpose. TurboTune is also accessible from the front panel key. The TurboTune panel displays nine channel tags. These channels can be specified via the TurboTune button on the SETUP MENU. The header area of the panel displays the title of the highlighted channel tag. You can choose one of the nine by moving the highlight over the desired channel and pressing .

SELECT

Note: A shortcut to moving the highlight is to press the number on the remote control that corresponds with the on-screen position of the logo for the desired channel. Example, press , then for the upper left channel.

SELECT 1

The OneLine™ Guide

The TurboTune™ popup

AlphaTune

Using AlphaTune, you can select a channel by spelling the channel’s call sign. To use AlphaTune, press the key and the key on the remote control, one after the other. The

ACTI ON

ALPHA

Page 5-3

Mitsubishi SR-HD5 HD DIRECTV Plus Receiver

▲

symbol will appear on the screen. You can now enter numbers and letters (letters are located above the number keys) to spell a channel’s call sign. For example, to tune to ESPN, press the key sequence . All special symbols such as the ampersand (&), forward slash

ACTI ON

(/), exclamation point (!) are found in the key. As soon as the receiver can determine what

— 2 7 6 5

channel you are seeking, it will tune to it automatically. No additional keys need to be pressed.

If the channel call sign contains fewer than four letters, you may need to press the key

SELECT

after the letter sequence to indicate that you have entered enough letters. If more than one channel call sign shares the same set of keys (for example, CNN and COM both use 155), one channel will be displayed. If that is not the channel you want, press , one after

ACTI ON

—

the other, and the next channel sharing the same set of keys will appear.

With experience, you will become more familiar with the channel name abbreviations that are used.

Alternate Services

The HD receiver can support alternate audio services. To determine if the services are available for a particular program, look for their icons below the data and time in the Channel Banner or on the on-screen guide. To use these services when available, press the key and

key on the remote control, one after the other. The

Alternate Services banner, shown at the right, will appear at the bottom of the screen.

Audio

Once you have selected the Audio button you can use the and keys to step through the audio tracks offered for the current program.

ACTI ON

The Alternate Services panel

To choose the highlighted language, press . On occasion an audio track may be offered that

SELECT

is not being broadcast. If this is the case, you will hear either unchanged audio or silence. SAP (Secondary Audio Program) sound is not available on local analog channels received from a terrestrial antenna or cable TV service.

Closed Caption

Closed Caption allows you to change the caption display mode for the program being watched and to turn it on or off. If the closed caption setting in the A/V menu is set to OFF or to a different caption setting, then the selection chosen on this screen is temporary and will be canceled when you change channels. This setting does not affect the closed caption setting of your TV.

Page 5-4

Advanced Program Guide™

Program Guide

The most powerful feature of the HD receiver is the DIRECTV Advanced Program Guide™. You may customize the on-screen guide to list only channels or programs of interest to you. Other advanced features available from the on-screen guides, such as scheduling and program information, will help plan your viewing. Continue reading to learn the real power of the HD receiver’s on-screen guides or Advanced Program Guide™. At any time you can press the key to display the current on-screen guide.

This HD receiver offers a variety of on-screen guides. Each guide has its own design to make finding programs of interest an easy task. These guides include the PROGRAM GUIDE (SM. CELL), PROGRAM GUIDE (LG. CELL), and LOGO GUIDE.

Each guide can be filtered into smaller channel groupings, as specified in your personalized favorite Channel Lists. You can also reduce the displayed listing by specifying a Theme of interest, and then narrow the offerings further by specifying a type within the Theme. Additional settings, such as Guide Times and Channel List, may be specified to determine the guide content. A full description of the filtering options can be found later in this chapter.

GUIDE

Note: Most Program Guide features will not be available if the HD Receiver is used without a satellite connection.

PROGRAM GUIDE Screen

Pressing the button on the remote control will display the PROGRAM GUIDE screen shown at the right. The guide is available in three formats: Large Cell, Small Cell, and the Logo Guide.

GUIDE

The PROGRAM GUIDE screen

Page 6-1

Mitsubishi SR-HD5 HD DIRECTV Plus Receiver

PROGRAM GUIDE Pop-up Menu

Pressing the key on the remote control a second time will display the PROGRAM GUIDE pop-up menu, shown at right. On the left side are the buttons Main Menu, Video, Guide Style, and Guide Sort. On the right side are the buttons Descriptions, Theme Filters, Channel List, Guide Times, and Watchword. These buttons are explained in the following sections.

GUIDE

Main Menu

The PROGRAM GUIDE pop-up menu

Highlighting the Main Menu button on the pop-up menu and pressing the key on the remote control will display the MAIN MENU screen

SELECT

shown and explained on page 7-2.

Video

Highlighting the Video button on the pop-up menu and pressing the key on the remote control will return you to the last program you were viewing.

SELECT

Choosing the Guide Style

To display the on-screen guides, press the key. Press the key again to display or remove the

GUIDE

guide pop-up menu.

To choose a guide style, simply highlight the Guide Style button and press . A pop-up menu shown

SELECT

at right offering each of the guide styles will be displayed. Highlight your selection and press the

SELECT

key. The guide will be redrawn to display your

selection.

Familiarize yourself with the benefits of each guide style.

GUIDE

The GUIDE STYLE pop-up menu

PROGRAM GUIDE (Large Cell)

The PROGRAM GUIDE (Large Cell) shown below displays two hours of programming information. Up to eight lines of channel information can be seen on the screen at one time. The number of lines is reduced to six if the program description option is selected.

The LARGE CELL screen

with description

Page 6-2

The LARGE CELL screen

without description

Advanced Program Guide™

▲

The term “Large Cell” means that there are two lines of text associated with each program title. While this provides more space for the program titles and Channel Tags, it also reduces the number of channels for which information can be seen on the screen at one time.

The largest area of the PROGRAM GUIDE (Large Cell) is made up of cells known as the program grid. Some cells have arrows indicating that the program started at an earlier time, or continues until a later time, than the time displayed on the grid. The length of each grid cell approximates the duration of the associated program.

A time line spanning the width of the guide indicates the show times of the programs being displayed. The list of blocks running down the left-hand side are the “channel tags.” Depending on the Guide Sort (Name or Number) option specified in the Guide pop-up menu, the tags may display the channel numbers or call signs. This will dictate whether the channels are listed by channel number or alphabetically by call sign.

To navigate the guide, use the , , , and keys on the remote control. You can continue to

▲

press the or keys on the remote control to scroll more program information on the screen.

Pressing the key on the remote control while highlighting any title will display the

INFO

INFORMATION screen.

Use the and keys on the remote control to scroll through the guide entries one page at a time.

When the highlight is in the grid, use the or keys on the remote control to move the highlight

▲

left or right. If you move the highlight on to the Channel Tags in the leftmost column, they will reverse themselves: they will turn from Channel Numbers to Call Signs or from Call Signs to Channel Numbers.

Move the highlight to the right, using the keys on the remote control, to move the grid area to

▲

reveal later time periods. Sometimes after scrolling a few hours ahead, there may be a brief delay while more information is received from the satellite.

Page 6-3

Mitsubishi SR-HD5 HD DIRECTV Plus Receiver

▲

PROGRAM GUIDE (Small Cell)

The PROGRAM GUIDE (Small Cell) screen shown below displays 1-½ hours of programming information. Up to 12 lines of channel information can be seen on the screen at one time. This number of lines is reduced to 9 if the program description option is selected.

The SMALL CELL screen

without description

The SMALL CELL screen

with description

The term “Small Cell” means that there is only one line of text associated with each program title. While this can cause the title to be cut short, or abbreviated, it also permits information about more channels to be seen on the screen at one time.

A time line spanning the width of the guide indicates the show times of the programs being displayed. The list of blocks running down the left-hand side are the channel tags. Depending on the Guide Sort option (Name or Number) specified in the GUIDE pop-up menu, the tags may display the channel numbers or call signs. This will dictate whether the channels are listed by channel number or alphabetically by call sign.

To navigate the guide, use the , , , and keys on the remote control. You can continue to

▲

press the or keys on the remote control to scroll more program information on the screen.

Pressing the key on the remote control while highlighting any title will display the

INFO

INFORMATION screen.

Use the and keys on the remote control to scroll through the guide entries one page at a time.

When the highlight is in the grid, use the or keys on the remote control to move the highlight

▲

Move the highlight to the right, using the keys on the remote control, to move the grid area to

▲

reveal later time periods. Sometimes after scrolling a few hours ahead, there may be a brief delay while more information is received from the satellite.

Page 6-4

Advanced Program Guide™

▲

LOGO GUIDE

This guide style offers the greatest number of channel identifiers displayed simultaneously. It displays up to 40 network logos at one time. This number of logos is reduced to 30 if the program description option is selected.

The title of the program currently being broadcast on the highlighted channel appears in the header area immediately above the logo grid. Only information about current programming is available from the LOGO GUIDE.

To navigate the guide, use the , , , and keys. You can continue to press the or keys to scroll through the guide entries a full page at a time.

▲

Pressing on any title will direct you to the INFORMATION screen. Use

INFO

the and keys to scroll through the guide entries a full page at a time.

The LOGO GUIDE without description

The LOGO GUIDE with description

Descriptions

One guide option is to automatically display descriptions for highlighted program titles. The descriptions usually provide information such as actors’ names, a program synopsis, and additional rating information. Sometimes the description may be only a message describing what type of program is highlighted, such as “Current News.”

This option is chosen via the Descriptions button on the guide pop-up menu. Displaying the extra information reduces the number of channels or titles that can be displayed at one time.

Remember that you can always access program descriptions by pressing the key whether

INFO

or not the Descriptions button is selected.

Filtering the Guides

Searching through hundreds of channels can be overwhelming. The HD receiver will help you find what you are looking for. By pressing the key while already in a guide, a pop-up menu will display, providing the filtering tools and ways to access other guide styles.

By combining each of these filter options, you can quickly narrow down 225+ channels to those that match your viewing interests. Once you exit to view your program, all filters except for the favorite list will reset to an unfiltered condition.

You should also be aware that some guide styles do not provide access to certain filter options. The unavailable filters will not appear in the Guide Menu.

GUIDE

Page 6-5

Mitsubishi SR-HD5 HD DIRECTV Plus Receiver

SELECT

▲

ACTI ON

Theme Filters

When the Theme Filters button on the PROGRAM GUIDE pop-up menu is highlighted and the

button is pressed, a Theme Filters pop-up menu, shown on the right, will be displayed listing all of the categories of available programs such as Movies, Sports, Interests, Lifestyles, News, and other categories. You can scroll up or down through this list by using and on the remote control.

Activating a category displays a subcategory pop-up menu, which lists the subcategories within the selected category. As one example, within the Movies category are Action/Adventure, Comedy, Current Affairs, Drama, Fantasy, Horror, Music, and Mystery/Crime.

Pressing the All button clears the choices.

Popular categories can be quickly selected from your

ACTI ON

remote control by pressing , followed by a number key. You will see labels on the remote control for filtering the guide to movies, sports, news, and all. Press

ACTI ON

for movies, for sports, or for news, and the guide will filter accordingly. Pressing the key sequence a second time or pressing will restore the guide to show all themes.

The Theme Filters pop-up menu

Channel List

The Lists pop-up menu enables you to filter the guide to display only channels from the selected list. In addition to All Channels, you can choose one of your own defined lists. See the “Fav. Lists” subsection of Chapter 7, “HD Receiver’s Menu System,” to learn how to set your favorite lists.

The channels selected on the Family List are the only channels available when the HD Receiver has been locked.

You can use the key to cycle through the lists at any time in the on-screen guide without using the popup menu.

FAV

The Movies Subcategory pop-up menu

The Lists pop-up menu

Page 6-6

Advanced Program Guide™

▲

SELECT

Guide Times

The Guides pop-up menu provides easy access to future programming information. Simply select one of the listed times. After a few seconds, the selected guide will appear.

WATCHWORD™

The WATCHWORD popup is used to specify up to eight different words that can be used to identify programming of interest to you. The HD receiver will search the program titles and descriptions in the guide for programs that contain matching words. These matches will be displayed when you select the RESTART button. Some matches will be displayed as soon as they are found, and others will be added as the search continues in the background.

The Guide Times pop-up menu

The WATCHWORD™ setup screen

WATCHWORD™ Entry

Highlighting one of the eight choices and pressing

SELECT

will initiate a pop-up keyboard where you can define a search word. If “CAGNEY” and “ALIEN” were specified, the “CAGNEY” search word might find movies in which James Cagney performed, as well as the TV series “Cagney and Lacey.” The “ALIEN” search word might find the movie “Aliens,” as well as any program which includes the word “alien” in the description. Partial words work as well.

Entering the desired words is easy using the pop-up keyboard. You can highlight the desired letter using the , , , and keys. Press to enter the

▲

The WATCHWORD™ Entry pop-up menu

letter. Once the word is entered, choose OK.

General On-Screen Guide Features

While there are different ways the guides can appear, there are some things they have in common.

The guide name will always appear in the upper left corner. It may be something simple like

“PROGRAM GUIDE.” If you have filtered the guide, it could be more descriptive such as “COMEDY MOVIES GUIDE.” (See the “Filtering the Guides” subsection later in this chapter.)

Page 6-7

Mitsubishi SR-HD5 HD DIRECTV Plus Receiver

● Immediately below the guide title are indicators showing how the guide is further fil-

tered. The label to the left specifies the current class filter setting. To the right you will see the current channel list.

● In the upper right corner of your screen the current day, date, and time are displayed.

● Just below the time you may see small icons indicating the status of the system or details

about the currently highlighted program title. They are the same icons that appear in the Channel Banner.

● The primary body of the guide screen displays channels or program titles. You can press

SELECT INFO

on a currently airing program to tune to it. Pressing will take you to the

INFORMATION screen described later in this chapter.

● If a program title cannot entirely fit in the space provided, ellipses (…) indicate that a

portion of the title is missing.

The INFORMATION Screen

To obtain more information about a particular program while a PROGRAM GUIDE screen is displayed, and you are highlighting a Program on the screen, press the button on the remote control to display the INFORMATION screen shown here.

INFO

If you are highlighting a Channel Tag in the channel column of the PROGRAM GUIDE screen, press the

INFO

button on the remote control to display a

modified INFORMATION screen. Information

The INFORMATION screen

about the Channel Tag and Call Sign will be displayed.

Done

Highlighting the Done button on the screen and pressing the key on the remote control causes an exit from the INFORMATION screen and return to the PROGRAM GUIDE screen or channel offering a purchase.

SELECT

Show Times

Highlighting the Show Times button on the INFORMATION screen and pressing the key on

SELECT

the remote control will display the SHOW TIMES screen, shown here, which displays the upcoming show times for the program you selected.

SHOW TIMES Screen

On the right side of the SHOW TIMES screen will appear the Program Title of the program highlighted in the PROGRAM GUIDE screen. On the left-hand side of this column will appear the Channel Identifiers and Call Signs of the channels offering that show. On the right-hand side of the column will appear a Program Show Date and Time.

The SHOW TIMES screen

On the left are the buttons Done, Video, and Guides explained below.

Page 6-8

Advanced Program Guide™

Done

Highlighting the Done button on the screen and pressing the key on the remote control will cause an exit from the SHOW TIMES screen and a return to the INFORMATION screen.

SELECT

Video

Highlighting the Video button on the screen and pressing the key on the remote control will return you to the last program you were viewing.

SELECT

Guides

Highlighting the Guides button on the SHOW TIMES screen and pressing the key on the remote control will initiate a drop-down menu offering easy access to future programming information. Simply select one of the listed times. After a few seconds, the selected guide will appear.

SELECT

PreSelect™

Use PreSelect to plan your evening or weekend viewing. The PreSelect feature will initiate a dropdown menu offering your PreSelect feature options.

To Vi ew

To Vi ew will mark the selected program to be automatically tuned in when it airs. At the right time, if the HD receiver is off, it will turn on and tune to the appropriate channel. Your selected programs will be identified on the on-screen guide with a check mark

✓) before the program title.

(

The PreSelect™ screen

To Tape

To Ta pe is very similar to To Vi ew ; however, if you have connected your VCR to the HD receiver via the IR cable and have properly set the VCR code from the Setup Menu, the chosen program will be recorded at the correct time. If the HD receiver turned itself on to record the program, it will also remember to turn itself back off after the program ends. Programs you have scheduled for taping will be identified with a videotape icon ( ) before the program title in the on-screen guide. For unattended recording using this feature, refer to page 6-11.

Note: Only the PreSelect To View option appears when the unattended recording capability is not available or when a program is not authorized for taping. In this case, the HD receiver can still be scheduled to tune to it when it comes on.

Don’t PreSelect

Once a program has been scheduled for viewing, previewing, or taping, you have the option of canceling the action. Schedules can also be canceled directly from the on-screen guide by highlighting a scheduled program and pressing the key.

SELECT

PreSelecting Programs from the Advanced Program Guide™

You can perform the PreSelect capability from within the program on-screen guides. Simply highlight the program you want to schedule and press the key. Each press of the key cycles through the available options.

SELECT SELECT

Page 6-9

Mitsubishi SR-HD5 HD DIRECTV Plus Receiver

PreSelecting Programs for Taping

You can utilize this feature commonly known as StarSight® One-Touch Record (OTR). Programs that have been scheduled to be taped will be identified with a videotape icon ( ) before the program title on the on-screen guide. If you do not want to have the PreSelected program recorded, press the key again to change the setting to be automatically tuned to for viewing.

When using the To Tape feature the following steps must be completed for the HD receiver to perform unattended recording:

● Attach the VCR Control cable. (See Chapter 2, “Setting Up Your Satellite Receiver.”)

● Use the VCR SETUP screen. (See Chapter 7, “HD Receiver’s Menu System.”)

● Switch the HD receiver to SD (480i) output mode.

SELECT

Note: Only the OUT TO TV or Audio/Video/or S-video outputs of the HD receiver can be recorded with a standard VHS VCR. You cannot watch the Y,

, or Pb outputs (1080i format) video while recording, because the HD

receiver will only output 1080i format or

standard 480i format, but not both simultaneously. When a program is preselected for taping, the output of the HD receiver should manually be switched by the user to SD (standard 480i) when recording starts.

● Set your VCR to match the output of the HD receiver. This could be either RF (channel 3

or 4) or A/V (audio left and right with video or S-video).

● Insert a recordable videotape of sufficient length in the VCR.

● Leave the VCR turned ON.

PreSelecting Programs for Viewing

Programs that are PreSelected for viewing will be identified on the on-screen guide with a check

✓) before the program title. An additional press of the key will return the status to

mark (

SELECT

not scheduled.

Canceling PreSelected Programs

To cancel a PreSelected program, find the upcoming program you wish to cancel and press the

SELECT

key until the check mark (

If the program is currently airing, you will need to delete the event from the SCHEDULER screen accessed from the MAIN MENU.

✓) or videotape icon ( ) is no longer shown.

Page 6-10

HD Receiver’s

▲

Menu System

The HD receiver offers much more than fantastic audio and video. The Main Menu is the primary location where you can access system management functions. From the MAIN MENU you can access the on-screen guide, customize system features, read DIRECTV messages, lock and unlock your system, and more.

Most of the menus and screens described in this chapter can be accessed from the front panel. When number entry is requested, the and keys will cycle through the possible digits. If the current channel is locked, pressing the key will display the LOCK OVERRIDE pop-up screen where you may enter your passcode to unlock the channel.

Menu Overview

HD receiver menus have been designed to provide a logical and convenient way to access system features and settings. The basic screen layout of each menu is divided into several distinct areas. They are as follows:

● Title, date, and time—Across the top of the screen you will see the title of the current

menu on the left-hand edge and the date and time on the right-hand edge.

● Advisory messages—Along the bottom of the screen you will see an area that is dedi-

cated to providing a brief explanation of the currently highlighted on-screen button.

● Places to go—Down the left-hand edge of the screen are a variety of buttons. These but-

tons usually navigate you to different screens. The top two buttons on the list are always Done and Video. The Done button will take you back one level. The Video button will return you to the most recently watched channel. This button is provided in case you are using the HD receiver’s front panel and don’t have access to the remote control. If the remote control is handy, pressing the key is an easier way to return to your program. The information banner will appear briefly or you can erase it quickly by pressing

EXIT

the key again.

● Things to do—This largest portion of the screen is dedicated to topics associated with the

current menu. Contents usually include buttons for changing settings or checking the status of some feature. You will also see information regarding the current menu.

SELECT

EXIT

Some buttons contain small icons inside them, indicating their function:

The current setting will cycle through the possible settings with each press of the key.

A list of options will be offered. This list appears in what is referred to as a “Pop-up Menu.”

A series of boxes will appear to specify numbers and/or letters for the particular feature.

SELECT

Page 7-1

Mitsubishi SR-HD5 HD DIRECTV Plus Receiver

Main Menu

From the MAIN MENU you can access the on-screen guide, customize your system features, check incoming mail, lock and unlock your system, and more.

There are two ways to get to the MAIN MENU. First,

ACTI ON

you can press the keys on the remote control. Or when one of the on-screen program guides is displayed, you can press the key to reveal the pop-up GUIDE MENU, then select the Main Menu button.

GUIDE

Guide

The MAIN MENU

The Guide button takes you from the MAIN MENU to the on-screen guide. You can use the guide to display what’s available at a given time. The guide also offers a pop-up menu of buttons that are useful for filtering the guide or changing the style of the on-screen guide. For more information, refer to Chapter 6, “Advanced Program Guide.”

A quicker way to access the on-screen guide from the MAIN MENU or any other menu is by pressing the key, either on the remote control or on the HD receiver’s front panel.

GUIDE

The remaining buttons provide access to those features described in greater detail in this chapter.

Video

Highlighting the Video button on the screen and pressing the key on the remote control will return you to the last program you were viewing.

SELECT

Setup Menu

On the left are the buttons Done, Video, Preference, A/V Setup, Limits, Chan. Lists (for Channel Lists), TurboTune, Installation, and VCR Setup, which are explained below.

Done

Highlighting the Done button on the screen and pressing

SELECT

the key on the remote control causes an exit from the SETUP MENU screen and a return to the MAIN MENU screen.

The SETUP MENU

Video

Highlighting the Video button on the screen and pressing the key on the remote control will return you to the last program you were viewing.

SELECT

Page 7-2

HD Receiver’s Menu System

SELECT

Preferences

Highlighting the Preferences button on the SETUP MENU screen and pressing the key on the

remote control will display the PREFERENCES screen. By changing the various options on the

PREFERENCES screen and its companion, the ADVANCED PREFERENCES screen, you can

customize operation of the HD receiver as many times as you wish.

Done

Highlighting the Done button on the PREFERENCES screen and pressing the key on the remote

SELECT

control causes an exit from the PREFERENCES screen and a return to the SETUP MENU screen.

Video

Highlighting the Video button on the screen and pressing the key on the remote control will return you to the last program you were viewing.

The PREFERENCES screen

SELECT

Advanced

Highlighting the Advanced button on the PREFERENCES screen and pressing the key on the remote control will display the ADVANCED PREFERENCES screen. This screen contains additional preference options, which are described under “Advanced Preferences” on the next page.

SELECT

Preference Options

The right hand panel shows a list of Option buttons and current settings that relate to the look of menus and guides. These are Chan. (Channel) Tags, Scheme, Filters, and Translucency.

Channel Tags

With the Chan. Tags (Channel Tags) option, you can select the Channel Tags that are displayed on the PROGRAM GUIDE screens. You may select Name/Number Channel Identifiers (numbers or Call Signs such as ABC, for example) or Network Logos.

Note: If you sort the channels by Name, using the and keys to step through the channels will appear to change channels in a random order when, in fact, the channels are sorted and tuned to in alphabetical order.

Scheme

The SCHEME pop-up menu enables you to select a color scheme for the on-screen guides and menus.

Highlighting the Scheme button on the screen and pressing the key on the remote control will display the SCHEME pop-up menu to select a color scheme for the guide screens and menus.

SELECT

Page 7-3

Mitsubishi SR-HD5 HD DIRECTV Plus Receiver

Filters

The default setting for Filters is “Temporary.” With a setting of “Tem porary,” each time you leave the on-screen guide, all filters other than the Channel List will reset “All Categories.” If you change the Filters setting to “Persistent,” any filtering that you should happen to do will survive exiting the on-screen guide and be in effect for the OneLine™ Guide and even later when returning to the on-screen guide at a later time.

Translucency

The TRANSLUCENCY option allows you to set the degree of translucency in menus and screens that overlay video.

Advanced Preferences

Highlighting the Advanced button on the PREFERENCES screen and pressing the key on the remote control will display the ADVANCED PREFERENCES screen shown at right. This screen contains additional preferences that are less likely to require changes once they are selected. Most users will not make any changes to this screen. This screen also provides a means to reset all preference settings to the factory default settings.

SELECT

Done

The ADVANCED PREFERENCES screen

Highlighting the Done button on the screen and pressing the key on the remote control causes

SELECT

an exit from the ADVANCED PREFERENCES screen and a return to the PREFERENCES screen.

Video

Highlighting the Video button on the screen and pressing the key on the remote control will return you to the last program you were viewing.

SELECT

Advanced Preference Options

On the right of the ADVANCED PREFERENCES screen is a panel of option buttons and their related current settings: Receiver ID, Channel Lock, and Factory Defaults, which are explained below.

Receiver ID

Someday, you may choose to get a second HD receiver. If both receivers are in the same home or if you are using an RF remote control or a remote control extender, you may experience interference between signals. To avoid this “cross talk,” simply highlight the Receiver ID button and press on the remote control to be used for that specific HD receiver. Remember to set your remote control to the desired code first. For information regarding changing the remote control code, see Chapter 8, “Changing the Remote Control Address to operate other HD Receivers.”

SELECT

Page 7-4

HD Receiver’s Menu System

Channel Lock

The Channel Lock setting provides a way for you to set your HD receiver to permanently stay on a specified channel. When the setting is anything other than “- - - -” the HD receiver will always power up on that channel and will ignore any attempts to change the channel. To allow channel changing to function again, set this option to “Off.”

Factory Defaults

To reset the HD receiver preferences, select the Factory Defaults button on the ADVANCED PREFERENCES screen.

Audio/Video Setup

Highlighting the A/V Setup button on the SETUP MENU screen and pressing the key on the remote control will display the AUDIO/VIDEO SETUP screen.

Note: The gray bars that occur in the letterbox mode can increase the chance of uneven picture tube aging. Because of this, it is recommended that you use the full or cropped mode instead. Please see Appendix B, “Special Information Concerning Stationary Images or Letterbox Images,” for more information on uneven picture tube aging.

SELECT

Audio

The AUDIO option on the Audio/Video Setup menu enables you to specify the language track for programs you watch. While English is the default language, you may choose an alternate language. If your chosen language is available for the program, you will hear that language. Otherwise, you will hear the primary language in which the program was produced.

Dolby Digital

The Dolby Digital option lets you turn the Dolby Digital output On or Off. This setting affects the optical DIGITAL AUDIO OUT port on the back of the HD receiver. When set to On, Dolby Digital audio is sent to your Dolby Digital AV receiver for decoding. If the program does not have Dolby Digital audio, then standard PCM digital audio is sent. When set to Off, the digital audio is always PCM digital audio. This setting is used with AV receivers that decode PCM digital audio but not Dolby Digital audio.

WARNING

Before using the DIGITAL AUDIO OUT connectors with a standard PCM (i.e., not Digital Dolby) digital bitstream decoder/

receiver, set the Dolby Digital option on the Advanced Preferences screen to be “Off.” Failure to do this could result in a high level noise and could be harmful to your ears and equipment.

AUDIO/VIDEO SETUP screen

Page 7-5

Mitsubishi SR-HD5 HD DIRECTV Plus Receiver

Closed Caption

The Closed Caption option allows you to set the default mode and caption channel to be viewed on-screen when first tuning to a program.

When OFF is selected, captions will not be displayed.

If CC1 or CC2 is selected, then the HD receiver will decode and display the appropriate closed captioning channel, if present.

TV Resolution

The TV Resolution menu option lets you set the output format of the SD-HD5 receiver. By default the TV Resolution is set to 1080i for a High Definition monitor or television. If you have a Standard Definition monitor or television, you should choose 480i. If you change this setting, the on-screen menu will disappear from view. You need to change the TV’s input to match the new output setting. Switching between HD and SD can also be done by using the remote control. Press the key once, then press the key, followed by the key. If you have a

SAT

Mitsubishi HD-upgradeable TV, the same key sequence will switch between the DTV (HD) and INPUT 2 (SD) inputs of your TV.

Note: The SD-HD5 receiver will output HD video through the Component Video (Y, P

, Pb) connectors or SD video through the OUT TO TV/VIDEO/S-

VIDEO connectors, but it will not output both formats simultaneously. Please refer to Chapter 2 “Setting Up Your HD Receiver” for instructions on connecting your type of monitor or television.

ACTI ON

INPUT

Screen Ratio

The Screen Ratio menu option lets you specify the aspect ratio of your monitor of the television so the video programming can be properly displayed. The choices are 4:3 for most standardshaped TVs and 16:9 for wide-screen TVs. While you should select 4:3 for most of the standardshaped TVs, there are exceptions. Mitsubishi HD Upgradeable 4:3 models VS-50800, VS-50803, VS-50805, VS-60803, VS-60805, VS-70803, and VS-80803 will automatically display all HD (1080i) signals in a 16:9 image in the center of the screen. For these models, you should select 16:9 as the proper setting when watching HD signals (all Y, P

, Pb) and 4:3 as the proper setting

when watching SD (RF, Video, or S-video). There may be HD monitors from other manufacturers that act the same way and would also require the 16:9 setting for HD (all Y, P

, Pb)

signals. Check the owner’s guides for those HD monitors for details.

Image Shape

This button allows you to select the image of the video displayed on your television. These display options can also be accessed from the remote control by pressing the key sequence

ACTI ON

If you are using a 4:3 (standard) television or monitor and receiving a 16:9 (wide-screen) image, which is wider than the screen, you can choose between one of the following.

Full

In the fill mode, 16:9 images will be enlarged vertically and compress horizontally to fill the screen with the entire image. No image content is lost, however images will appear tall and more slender than normal.

Page 7-6

Note: To minimize uneven picture tube aging, the cropped or full mode is recommended. Please see Appendix B, “Special Information Concerning

HD Receiver’s Menu System

Stationary Images or Letterbox Images,” for more information on uneven picture tube aging.

Cropped

In the cropped mode, the 16:9 image is enlarged to fill the screen vertically and centered horizontally. Some image content is lost at the left and right sides of the 16:9 image.

Note: To minimize the chance of uneven picture tube aging, the cropped or full mode is recommended. Please see Appendix B, “Special Information Concerning Stationary Images or Letterbox Images,” for more information on uneven picture tube aging.

Letterbox

In letterbox mode, the 16:9 image fills the screen horizontally and is centered vertically, with gray bars above and below the image. You will see gray bars above and below the 16:9 image. No image content is lost, but the horizontal and vertical resolution is reduced.

Note: If you are using a 4:3 television or monitor and receiving a 4:3 image, the Image Shape setting will have no effect.

If you are using a 16:9 television or monitor and receiving a 4:3 image, which is narrower than the screen, you can choose between two different display methods:

Full

In the full mode, 4:3 images will be compressed vertically and enlarged horizontally to fill the screen with the entire image. No image content is lost, however images will appear short and wider than normal.

Cropped

The 4:3 image is enlarged to fill the screen horizontally and centered vertically. Some image content is lost at the top and bottom of the 4:3 image.

Note: To minimize uneven picture tube aging, the cropped mode is recommended. Please see Appendix B, “Special Information Concerning Stationary Images or Letterbox Images,” for more information on uneven picture tube aging.

Side Panels

The 4:3 image fills the screen vertically and is centered horizontally. You will see gray bars on the left and right of the 4:3 image. No image content is lost, but the horizontal resolution is reduced.

Note: If you are using a 16:9 television or monitor and receiving a 16:9 image, the Image Shape setting will have no effect.

Page 7-7

Mitsubishi SR-HD5 HD DIRECTV Plus Receiver

Limits

Highlighting the Limits button on the SETUP screen and pressing the key on the remote control will display the LIMITS screen shown. The LIMITS screen provides settings to help you control the viewing restrictions on satellite programming. These limits, when accompanied by the CHANNEL LISTS, put TV-watching control in your hands.

On the left of the LIMITS screen are buttons for Done, Video, TV Timer, Rating Help, and Max Spending, which are explained below.

Done

Highlighting the Done button on the screen and pressing the key on the remote control will cause an exit from the LIMITS screen and a return to the SETUP screen.

SELECT

Note: The TV Timer, Rating, and Spending Limits are in effect only when the HD receiver is locked. Locking and unlocking the HD receiver is explained later in this chapter.

The LIMITS screen

SELECT

Video

Highlighting the Video button on the screen and pressing the key on the remote control will return you to the last program you were viewing.

SELECT

TV Timer

Highlighting the TV Timer button on the LIMITS screen and pressing the key on the remote control will display the TV TIMER screen.

From the TV TIMER screen you can specify the hours that satellite programming can be viewed on your receiver, which is done by highlighting each of the days you wish to control and pressing . After selecting a day of the week, you can set an acceptable start and end viewing period or a total viewing duration.

SELECT

The TV TIMER screen

Page 7-8

HD Receiver’s Menu System

▲

Rating Help

Program ratings indicate the suitability of a program’s content for a given audience. For families with younger children, a lower rating limit may be desirable. Other families may choose to allow viewing of more sophisticated programming.

Highlight the Rating Help button and press to

SELECT

display the RATING HELP pop-up menu. Use the

and keys to view information about the agebased rating and content themes listed in the menu. The table on the next page provides more detail about the ratings.

Rating Description

The RATING HELP pop-up panel

TV-MA Mature Audience Only. Specifically designed to be viewed by adults and may be

unsuitable for children under 17. It contains one or more of the following content themes: crude, indecent language (L), explicit sexual activity (S), or graphic

violence (V).

TV-14 Parents Strongly Cautioned. Contains some material that many parents would find

unsuitable for children under 14. Parents are strongly urged to exercise greater care in monitoring this program and are cautioned against letting children under the age of 14 watch unattended. This program contains one or more of the following content themes: intensely suggestive dialogue (D), strong, coarse language (L),

intense sexual situations (S), or intense violence (V).

TV-PG Parental Guidance Suggested. Contains material that parents may find unsuitable

for younger children. Many parents may want to watch it with their younger children. The program contains one or more of the following content themes: some

suggestive dialogue (D), infrequent coarse language (L), some sexual situations (S), or moderate violence (V).

TV-G General Audience. Most parents would find this program suitable for all ages. It

contains little or no sexual dialogue (D), no strong language (L) or sexual

situations (S), and little or no violence (V).

TV-Y7 Designed for children ages seven and above. More appropriate for children who

have acquired the developmental skills needed to distinguish between makebelieve and reality. Themes and elements in this program may include mild fantasy violence (FV) or comedic violence, or may frighten children under the age of seven.

TV-Y All Children. Themes and elements in this program are designed for a young

audience, including children from ages 2–6. Not expected to frighten younger children.

MPAA G: General audiences. All ages admitted.

PG: Parental guidance suggested. Some material may not be suitable for children.

PG-13: Parents strongly cautioned. Some material may be inappropriate for children under 13.

R: Restricted. Under 17 requires accompanying parent or adult guardian.

NC-17: No one 17 and under admitted.

Page 7-9

Mitsubishi SR-HD5 HD DIRECTV Plus Receiver

SELECT

▲

Max Spending

Pay per view access enables you to purchase special, limited-broadcast programs such as sporting events and movies. You can set the maximum purchase price on a per-event basis. To change the displayed limit, highlight the Max Spending button and press to display the SPENDING LIMIT pop-up panel. When the HD receiver is locked, the passcode will be needed to change the ratings limit. Refer to the subsection “Lock/Unlock” later in this chapter for information on setting the passcode.

Use the number keys on the remote control to set the limit or use the and keys to increase or decrease each digit. Use the and keys to highlight the digit

▲

that you want to change. The maximum limit is $655 per event.

The MAX SPENDING pop-up panel

Highlight OK and press to confirm the entered amount.

SELECT

Channel Lists

Highlighting the Chan. Lists button on the SETUP screen and pressing the key on the remote control displays the CHANNEL LISTS screen shown.

Channel Lists are provided to help you organize the hundreds of available channels into groupings that suit the needs of your household. Each list can contain as many or as few channels as you would like. You can customize these groupings in a variety of ways. For example, Fav. A could be Dad’s favorite channels, Fav. B could be Mom’s favorites, Fav. C could be the kids’ channels, and Family could be all channels that Mom and Dad have deemed appropriate for the entire family. Each of the lists, with the exception of Family, can be renamed.

Note: Remember that when the HD receiver is locked, only channels selected in the Family list can be viewed. This means that even though a channel appears on the Fav. A, Fav. B, Fav. C, or All Channels list, the selected channel must also be on the Family list in order to view it.

SELECT

The CHANNEL LISTS setup screen

Note: For the Family list limit to be in force, the HD receiver must be locked.

On the left of the CHANNEL LISTS screen are buttons for Done, Video, AutoSet, Rename, Clear, and Set, which are explained below:

Done

Highlighting the Done button on the screen and pressing the key on the remote control causes an exit from the CHANNEL LISTS screen and a return to the SETUP screen.

Page 7-10

SELECT

HD Receiver’s Menu System

▲

Video

Highlighting the Video button on the screen and pressing the key on the remote control will return you to the last program you were viewing.

SELECT

AutoSet

AutoSet is designed to help in the initial programming of your channel lists. When you select the AutoSet button, a pop-up menu appears showing each of the channel lists. Highlight and select a

channel list to be programmed. Once selected, the AutoSet Progress pop-up status panel appears. It will take several minutes for the HD receiver to scan through all channels and determine which ones you are authorized to receive. The results of this scan will be stored in the designated channel list.

Note: The AutoSet Channel Scanning Process can inadvertently exclude some channels (such as the MUSIC CHOICE channels) or include some Pay Per View channels. You can manually edit your channel lists after AutoSet is done (see “Tag Boxes” below).

Rename

▲

SELECT

▲

SELECT

When you highlight the Rename button and press the key, a Rename List pop-up menu appears. You can choose any of the first three lists to be renamed. The All and Fam i ly lists cannot be renamed. Once you have selected a list, a Rename List entry keyboard pop-up panel appears. You can highlight the desired letter using the , , , and keys. Press to enter the letter. When you have finished, choose OK.

Clear

You may decide to remove all channels from a particular list later on. Selecting Clear will allow you to clear all channels from a chosen list. You may then add channels back in.

Set

If you decide to include all channels in a particular list, selecting Set will allow you to specify the list. You may then remove channels from this list, if you so choose (see “Tag Boxes” below).

Tag Boxes

The four columns of small boxes on the right hand side of the CHANNEL LISTS screen are the Tag Boxes. The first three columns are the lists traditionally known as Fav. A , Fav. B , and Fav. C . The fourth column is the Family list.

In the CHANNEL LISTS screen, use the , , , and keys to highlight the button that corresponds to the channel number and list that you wish to change. Press the key to add or remove the check mark, which indicates that the channel in that row is included in the list shown at the top of the column.

To help you decide whether to include or exclude a certain channel, the title of the currently airing program for that channel will appear at the top of the screen.

Locking and unlocking the HD receiver is described later in this chapter. When the system is locked, the passcode will be needed to modify the settings of the FAMILY channel list to use the other channel lists.

▲

SELECT

Page 7-11

Mitsubishi SR-HD5 HD DIRECTV Plus Receiver

SELECT

▲

TurboTune™

Highlighting the TurboTune button on the SETUP screen and pressing the key on the remote control displays the TURBO TUNE SETUP screen shown at the right.

On the left are buttons for Done and Video, which are explained below.

Done

Highlighting the Done button on the screen and pressing the key on the remote control causes

SELECT

an exit from the TURBO TUNE SETUP screen and a return to the SETUP screen.

Video

Highlighting the Video button on the screen and pressing the key on the remote control will return you to the last program you were viewing.

The TURBO TUNE SETUP screen is used to specify which nine channels will appear in the TurboTune pop-up panel that displays when is pressed.

SELECT

The TURBOTUNE setup screen

SELECT

Set Channel

Using the , , , and keys, highlight one of the nine channel boxes. You can enter the desired channel using the number keys on the remote control or by using the and keys. Pressing

SELECT

while highlighting one of the channel boxes will also initiate a pop-up panel that will allow you to set the channel using the and keys on the remote control or the HD receiver’s front panel.

▲

Installation

Highlighting the Installation button on the SETUP screen takes you to the INSTALLATION screen, which contains utilities to facilitate installation of your satellite dish antenna. You can also evaluate your system’s signal strength via the INSTALLATION screen. This screen was discussed in detail in Chapter 4, “Setting Up the Satellite Dish Antenna and Terrestrial Inputs.”

VCR Setup

The VCR SETUP screen provides access to the settings that will allow the HD receiver to communicate the record and stop commands to your VCR.

Brand

Using the and keys, search through the various brands of VCRs that are supported. Related brands that share the same control codes may be suggested. You may want to experiment with these if you are having difficulty finding a functioning code under your VCR’s own brand name.

The VCR SETUP screen

Page 7-12

HD Receiver’s Menu System

▲

SELECT

Code

More than one code may be assigned to your brand of VCR. Try each of the codes by using the and keys to step through each code. Alternate between this procedure and testing the code.

Test (Record/Stop)

The testing function allows you to verify that the specified code will control your VCR. To run the test, the VCR control cable must be properly attached (see “Setting Up Your HD Receiver” in Chapter 2), a recordable tape must be in the VCR, and the VCR must be turned on.

Use the button on the front panel of the HD receiver (instead of the remote control) when testing the codes, because signals coming from the remote control at the same time as signals coming from the VCR control cable could give unreliable test results.

Be sure to test both the Record and the Stop commands, which are necessary for successful taping capability. If either Record or Stop fails to function, try other codes associated with your VCR brand. If you are unsuccessful in the test process after trying all available codes, recheck your VCR control cable connections and IR emitter placement.

When a scheduled recording begins or a command to the HD receiver to start a recording, the user must manually switch to the SD outputs (480i). The HD output (1080i) will turn off. To view the picture during the recording time, change the input on your TV to the SD input.

Scheduler

Highlighting the Scheduler button on the MAIN MENU screen and pressing the key on the

remote control will display the SCHEDULER screen shown.

On the upper right is displayed the current Day, Date, and Time.

On the left are the buttons for Done and Video explained immediately below:

The SCHEDULER screen

Done

Highlighting the Done button on the screen and pressing the key on the remote control causes an exit from the SCHEDULER screen and a return to the MAIN MENU screen.

Video

Highlighting the Video button on the screen and pressing the key on the remote control will return you to the last program you were viewing.

Event Scheduling Options

On the right is the Events panel, which displays up to seven rows of events. The column headings on this panel are Do, Chan. (Channel), Start, Dur. (Duration), and Freq. (Frequency). The Do column permits two entries: a Check Mark ( for Taping. The Chan. (Channel) column permits an entry of a desired channel. The Start column permits entry of the Start Time, in hours and minutes, of a scheduled event. The Dur. (Duration) column permits entry of the duration, in hours and minutes, of the event. The Freq. (Frequency) column displays when or how often the event occurs: Today, Tomorrow, Every Mon (Tue and so on), Everyday, Mon–Fri, or “/” to specify an exact date.

✓) for Viewing only and a Videotape symbol ( )

SELECT

Page 7-13

Mitsubishi SR-HD5 HD DIRECTV Plus Receiver

▲

When using the PreSelect™ To Tape feature, the following steps must be completed for the HD receiver to perform unattended recording:

● Attach the VCR control cable as described in Chapter 2.

● Use the VCR SETUP utility as described earlier in this chapter.

● Switch the HD receiver to SD (480i) output mode.

● Set your VCR to match the output of the HD receiver, which could be either RF (channel

3 or 4) or A/V (audio left and right with video or S-video).

● Insert a recordable videotape of sufficient length in the VCR.

● Leave the VCR turned ON.

Editing an Event

The “Events” portion of the SCHEDULER screen displays up to seven scheduled events at one time. If more than seven events are already scheduled, you can use either the key to scroll down, or the key to view the additional events. A small arrow at the top or bottom of the event list indicates that there are additional events.

Once you have highlighted the event you wish to set or edit, press . You will be prompted

SELECT

with a pop-up menu. If you choose the scheduling option, the HD receiver will turn on (if necessary) and tune to the specified channel at the correct date and time. If the Schedule to Tape option is provided and is chosen, and you have successfully completed the VCR setup procedure, the HD receiver will allow recording of the event. To remove a scheduled event, select the Delete option. If you inadvertently pressed , select Cancel.

SELECT

After choosing a scheduling option, a pop-up panel appears for channel selection. You can enter the desired channel using either the number keys on the remote control or the and or

and keys.

After specifying a channel, press the key or select OK when you are ready to continue.

Next, enter a Start time using either the number keys on the remote control or the and keys.

▲

Press to continue.

You then must specify whether the time you entered is AM or PM (or N for noon, or M for midnight if the time specified is 12:00) using the and keys. To continue, press .

Using the same procedure as setting the start time, set the program Duration as hours and minutes. As before, use to advance to the Frequency column.

▲

SELECT

▲

The Freq uency column is very versatile. Using the and keys, you can specify when, or how often, the event occurs. Your choices are: Today, Tomorrow, Every Mon, Every Tue, Every Wed, Every Thu, Every Fri, Every Sat, Every Sun, Everyday, Mon–Fri , or “/” to specify an exact date. If you are specifying a date, enter the numbers using the remote control in month/day format. The year will be set automatically. Events can be scheduled up to eleven months in advance. Once you have set the Frequency, advance using the key.

▲

Review your settings and choose OK. Otherwise, choose Cancel to delete the edits made to this event.

Page 7-14

HD Receiver’s Menu System

▲

Check Mail

The CHECK MAIL feature of the HD receiver enables DIRECTV to notify you about important information, upcoming special events, offers, and other promotional programming.

When new messages are received, a “new mail” icon appears at the top of all menu screens. This indicator will remain on the menus until you have read the new message.

When you highlight the Check Mail button on the MAIN MENU screen, the advisory message at the bottom of the screen indicates if there are any messages to read. If there are, you can press to

SELECT

access the CHECK MAIL screen.

Message

The Message button will allow you to cycle through multiple messages if more than one piece of mail is available. Highlight the Message button and use the and keys to step through the messages.

The CHECK MAIL screen

Page

The Page button will allow you to cycle through the pages of a multipage message. Highlight the Page button and use the and keys to step through the pages.

Erase

The Erase button will remove a piece of mail from your mailbox. Please be aware that once a piece of mail has been erased, it cannot be retrieved. Messages will self-erase if they become outdated or if space is needed to hold newer incoming messages.

Purchases

The PURCHASE screen displays recently viewed and advance purchase pay per view events. You can choose between Purchase History and Upcoming Purchases by selecting the History button or Upcoming button located in the Places to Go area of the PURCHASES screen.

For each purchase, the event channel, title, start date and time, and cost is listed. If there are more events than can fit on the screen, use the key or advance a page at a time using to view them.

Highlighting the Purchases button on the MAIN MENU screen and pressing the key on the remote control will display the PURCHASES screen.

On the upper right is displayed the current Day, Date, and Time.

On the left are the buttons for Done, Video, and History, as explained below.

SELECT

Done

Highlighting the Done button on the PURCHASES screen and pressing the key on the remote control causes an exit from the PURCHASES screen and a return to the MAIN MENU screen.

SELECT

Page 7-15

Mitsubishi SR-HD5 HD DIRECTV Plus Receiver

▲

Video

Highlighting the Video button on the PURCHASES screen and pressing the key on the remote control will return you to the last program you were viewing.

SELECT

History

Highlighting the History button on the PURCHASES screen and pressing the key on the remote control causes the button to change to Upcoming, and a banner at the bottom right of the screen displays a partial history of Pay Per View (PPV) purchases (made with your remote control). Upcoming Purchases are explained below. Highlighting the Upcoming button on the screen and pressing the key on the remote control causes the button to change back to

SELECT

History, and a banner at the bottom right of the screen displays a list of future PPV programs that you order with your remote control. Purchase History is explained on page 7-17.

SELECT

Upcoming Purchases

The Upcoming Purchases screen displays PPV events you have purchased but not yet viewed or purchased but never viewed. Events that were ordered by calling DIRECTV will not appear on this list.

You will see the event channel, title, start date and time, and cost for each purchase. There may be more events than can fit on the screen. You can access these by using the key or key.

If you would like to cancel an event, highlight that event and press . A pop-up panel will be

SELECT

displayed where you can cancel your purchase. Be aware that cancellation of some events may not be possible.

Buy

The Buy feature is used for PPV programming. The price of the event is displayed on the right side of the screen under the program title. To confirm your purchase, highlight the Buy button on the screen and press the key on the remote control. If you are not authorized to make the

SELECT

purchase directly from the HD receiver, you will need to contact DIRECTV for assistance.

Note: An order assistance fee applies to all Pay Per View phone-in orders.

Buy Options

Activating the Buy Button will display a pop-up menu screen with three purchase options and prices for: Vi ew, Tape, and Don’t Purchase.

The View price indicates the cost to view the program only. A purchase of this type excludes the possibility of taping the program for later viewing.

The Tape price indicates the cost to record the event for later viewing. You can also view the event as it is being shown and recorded.

After choosing either View or Tape, confirm or cancel the purchase.

If neither purchase option is of interest, highlight the Don’t Purchase button and press the key on the remote control.

SELECT

Cancel Purchase

Some events may allow cancellation after they have been purchased, depending upon the event type and whether the event has been viewed. Events that have been purchased but not yet viewed can usually be cancelled. If the Cancel Purchase button is displayed, you are allowed to cancel

Page 7-16

HD Receiver’s Menu System

▲

the purchase. If the button is not displayed, then it is likely that a portion of the event has been viewed and the purchase may not be cancelled.

Purchase History

The Purchase History displays a list of PPV events that will be or have been charged to you. You will not see events you purchased but later canceled or events you purchased but which the HD receiver never tuned to. Events that were ordered by directly calling DIRECTV will also not appear on this list. You cannot remove events from this list. Reported events will disappear from this list as the HD receiver needs space to log more recent purchases.

You will see the event channel, title, start date and time, and cost for each purchase. There may be more events than can fit on the screen. You can access these by using the key or key.

If you need to discuss an event with DIRECTV, highlight the questioned event and press .

SELECT

Additional information will be displayed.

Caller ID

If you have Caller ID (Identification) service from your telephone service provider, an incoming telephone call will display an Incoming call from pop-up screen containing the Name and Telephone Number of the caller.

Highlighting the OK button on the pop-up screen and pressing the key on the remote control will

SELECT

continue to display this pop-up screen whenever an incoming telephone call arrives. Highlighting the Disable button on the pop-up screen and pressing the

SELECT

key on the remote control will prevent the display of the Incoming call from pop-up screen whenever an incoming telephone call arrives. Incoming telephone call information will still be retained, however, and displayed on the Caller ID List screen.

Call History

Highlighting the Caller ID button on the MAIN MENU screen and pressing the key on the remote control displays the Caller ID List screen.

Caller ID Over video

Caller ID Over menu

SELECT

On the left are the buttons for Done, Video, and Disable, as explained below.

Done

Highlighting the Done button on the screen and pressing the key on the remote control causes an exit from the Caller ID List screen and a return to the MAIN MENU screen.

SELECT

Video

Highlighting the Video button on the screen and pressing the key on the remote control will return you to the last program you were viewing.

SELECT

Page 7-17

Mitsubishi SR-HD5 HD DIRECTV Plus Receiver

▲

Disable

Highlighting the Disable button on the screen and pressing the key on the remote control will prevent the display of the Incoming call from pop-up screen whenever an incoming telephone call arrives.

SELECT

Call History

On the right is displayed the Call History, which displays two lines of information for each incoming caller: Today or a date, the Time of the most recent telephone call from that caller, the Number of Telephone Calls from that Caller since the screen was last displayed, and the Telephone Number of the Caller. These lines of information are displayed with the latest telephone call shown first.

Help

The Help button takes you to the ASSISTANCE screen. It should be your first stop when you need help or have a question. Think of this feature as a quick reference manual.

Lock/Unlock

When you first receive your satellite system, it will be unlocked (that is, no limits or restrictions are in effect). To enforce the limits (spending, ratings, and “Family” favorite list), you must lock the system.

When the button on the MAIN MENU reads Lock, no lock symbol appears at the top of the menu screen, indicating that the system is unlocked.

NOTE: Once the HD receiver is locked, only channels selected on the Family list will be accessible. If the Family list does not have channels selected on it, no channels can be viewed without first unlocking the HD receiver. To avoid this inconvenience, verify the contents of the Family list before locking the HD receiver. For additional information, refer to “Channel Lists” earlier in this chapter.

Locking Procedure

When the Lock button is selected, the LOCK SYSTEM pop-up screen is displayed. Use the and keys or the remote control number keys to enter a four-digit passcode of your choosing. If you enter the code using the number keys, you will not see the numbers appear on the screen. After entering a four-digit passcode, highlight and select OK to proceed. Otherwise, choose Cancel to cancel the locking process.

If you continue, you will be asked to confirm the code by entering it again in the same fashion as before. Once again, highlight and select OK to proceed. Otherwise, choose Cancel.

The LOCK pop-up panel

Once OK has been selected, the HD receiver is locked. You will need your passcode whenever you wish to unlock or override the lock. The on-screen button used to lock your system is now used to unlock your receiver. A lock symbol appears at the top of every menu screen to remind you that the HD receiver is locked.

Page 7-18

HD Receiver’s Menu System

SELECT

▲

Unlocking Procedure

To remove the lock and its restrictions, highlight the Unlock button and press the key.

When the UNLOCK SYSTEM pop-up screen appears, you can use the and keys or the remote control number keys to enter the four-digit passcode that you used to lock the HD receiver earlier. If you enter the passcode using the number keys, you will not see the numbers appear on the screen.

After entering the passcode, highlight OK and press the

SELECT

key on the remote control.

Note: Once the HD receiver has been unlocked, all limits and restrictions are removed!

Otherwise, choose Cancel to keep the lock in effect.

If you forget your four-digit passcode, you must call DIRECTV for assistance.

Note: When the HD receiver is used without DIRECTV password can be cleared from the Service Test Screen. To access the Service Test Screen, press the and keys on the front panel simultaneously and

SELECT

then release. The smart card must not be inserted in the HD receiver.

The UNLOCK pop-up screen

services, the

Temporarily Overriding the Lock

There are times you may wish to temporarily remove the restrictions imposed by locking. You can do this without unlocking the HD receiver. You will be prompted by an on-screen message when you have this option to override the lock. When you press

SELECT

, the OVERRIDE LOCK pop-up will be displayed. It looks and navigates just like the UNLOCK SYSTEM pop-up panel.

Note: Once the correct four-digit passcode is entered, the HD receiver will remain unlocked until you turn the HD receiver off. The next time you turn the HD receiver on, all locks and limits will be enforced again.

The OVERRIDE LOCK pop-up

Page 7-19

Programming Your Remote Control

You can use both the same room IR remote control and the Whole House RF remote control that came with your HD receiver to control other components in your entertainment system as long as they are in the same room as the remote control.

Programming the Remote Control

There are two ways to program your remote control to match your equipment: code scan and code entry. Code scan can take some time, but it avoids having to refer to this manual to program your remote control. Code entry saves some time but you will need to look up the codes assigned to the devices.

Programming Mode

Keep your remote control aimed at the device you want to control during this process. The remote control will send out the “power” command for the device being programmed.

While holding down the device key you are programming (“TV” in this instance), press the “Mute” key for one full second. Then release the keys. The device key should light and stay lit. If it doesn’t, repeat the process. If it does, the remote control is now in programming mode.

Then choose either the code scan or code entry method, as described below.

Code Scan

Once you are in programming mode, repeatedly press the key to step through the codes, sending out the power command. This could take some time since there could be many codes for each type of device. When your device shuts off, you have found the code. If you inadvertently go past a code that responded, or realized that you may not have been aiming the remote at the device, you can use the key to step backward through the codes. Press the key to verify that you haven’t missed the code. In order to lock in the code, press the device key again. The remote will remember the code until you reprogram it.

POWER

The RF remote control

Page 8-1

Mitsubishi SR-HD5 HD DIRECTV Plus Receiver

Code Entry

Look for your device type and brand in the following charts. You will find one or more codes that should operate your device. If there is more than one code, try each of them to find the one that controls your device.

Once you are in the code-entry mode, enter the three-digit code for the product you would like to control. The codes are found on the charts on this page and the next pages. Press the device key being programmed to lock in the code. The remote control will remember the code until you reprogram it.

Test whether the entered code matches your device by pressing the key. If the device

POWER

responds, you’re all set. Otherwise, repeat the process using the next code for your brand or try the code scan method described under “Code Scan” on the previous page.

TELEVISION CODE NUMBERS

Admiral 072 081 160 161 A Mark 112 143 Akai 070 146 Amstrad 052 Anam 043 054 056 080 112

131 AOC 070 004 058 112 Audiovox 076 120 Blaupunkt 088 Bruette 572 Candle 070 002 003 004 Capehart 058 Cetronic 043 Citizen 070 002 003 004 043

101 103 143 Classic 043 Concerto 004 Contec 043 050 051 Coronado 143 Craig 043 054 191 Crown 043 143 Curtis Mathes CXC 043 Daewoo 076 103 004 016 043

Daytron 004 143 Dynasty 043 Dynatech 062 Electrohome 024 076 120 143 Emerson 004 005 028 043 047

Fisher 007 057 Funal 028 043 Futuretech 043 GE 160 165 161 070 008

070 101 143 004

114 120 127 143 128

136 192 044

048 050 051 076 120

143 151 153 154 155

070 096 191

009 034 056 073 074

130 155 167 004 145

TELEVISION CODE NUMBERS

Goldstar 004 106 110 112 119

127 143 193 Hall Mark 004 Hitachi 011 004 009 010 012

023 075 143 007 072 Infinity 164 JBL 164 JCPenny 070 004 008 009 030

065 101 160 024 143

156 Jensen 013 JVC 038 001 083 034 KEC 043 Kenwood 070 001 Kloss 002 059 KMC 143 KTV 043 143 154 070 Kuehn 722 Lodgenet 072 Logik 072 Lauxman 004 LXI 007 015 052 081 160 Magnavox 164 059 070 003 004

060 061 063 064 022

094 127 160 Marantz 070 164 Matsui 164 Memorex 004 007 072 Metz 088 MGA 024 070 004 024 028

042 Minerva 088 Mitsubishi 024 004 040 042 028

146 MTC 070 004 062 101 NAD 015 025 NEC 070 040 016 056 024

130 134 019 004 Nikei 043 Onking 043 Onwa 043

TELEVISION CODE NUMBERS

Optonica 019 081 Panasonic 034 080 056 164 Philco 164 070 003 059 060

064 004 056 063 024

Philips 164 093 038 005 059

127 070 003 004

Pioneer 025 070 004 018 023

190 Portland 004 143 065 Proscan 160 161 167 145 065 Proton 004 058 131 143 171

173 Quasar 034 056 080 164 Radio Shack 004 019 043 127 143 RCA 160 161 156 165 065

070 004 023 024 056

074 152 167 145 Realistic 007 019 043 047 Runco 072 130 Sampo 070 004 058 Samsung 101 004 050 089 105

160 127 143 133 Sanyo 007 020 053 057 082 Scott 004 028 043 048 143 Sears 015 030 028 094 004

007 057 082 143 160

167 Sharp 081 004 014 019 022

028 143 029 Siemens 088 Signature 072 Sony 001 085 126 166 079 Soundesign 028 003 004 043 Spectricon 112 SSS 004 043 Supre Macy 002 Sylvania 070 003 059 060 063

064 127 160 164 044 Sylvester 917 Symphonics 194 052 Tandy 081

Page 8-2

Programming Your Remote Control

TELEVISION CODE NUMBERS

Tatung 056 062 Technics 034 080 Techwood 004 Teknika 002 003 004 024 028

043 072 101 143 Telerent 072 Tera 173 Tmk 004 Toshiba 015 030 007 040 062

101 Universal 008 009 Video Concepts Vidtech 004 Wards 004 019 064 008 009

Westing House Yamaha 070 004 York 004 Yupiteru 043 Zenith 072 073 095 103 Zonda 112

VCR CODE NUMBER

Aiwa 034 Akai 016 043 046 124 125

Ampro 072 Anam 031 Audio Dynamics Brooksonic 035 037 044 129 152 Canon 028 031 Capehart 108 Craig 003 040 135 Curtis Mathes Deawoo 117 119 005 116 007

Daytron 108 Dimensia 156 DBX 012 023 039 043 Dynatech 034 053 Electrohome 059 Emerson 006 029 035 025 027

Fisher 003 008 009 010 Funai 034 GE 031 072 144 147 063

Go Video 040 132 136 Goldstar 101 123 012 013 114

146

028 060 061 063 072

074 143 164 165

076 120

142 146

012 023 039 043

031 041 156

010 065 108 110 112

034 036 037 046 101

129 131 138 017 031

044 152 157 153

151 107 109 156 126

VCR CODE NUMBER

Harman Kardon Hitachi 004 026 034 063 137

Instantreplay 031 JCL 031 JCPenny 012 013 040 101 156

Jensen 043 JVC 048 050 043 130 060

Kenwood 014 034 047 048 023 Lloyd 034 LXI 034 003 009 017 Magin 040 Magnavox 067 031 034 041 068

Marantz 067 069 031 067 012

Marta 101 Matsui 027 030 MEI 031 Memorex 102 101 003 010 014

MGA 045 046 059 Minolta 013 156 Mitsubishi 059 061 046 051 142

MTC 034 040 Multitech 024 034 NEC 012 023 043 048 039 Nordmende 043 Optonica 053 054 Panasonic 070 133 031 066 161 Pentax 013 031 063 156 Philco 031 034 067 Philips 031 067 034 101 054

Pilot 101 Pioneer 021 013 048 Portland 108 Quartz 002 014 Quasar 070 133 161 031 066 Radio Shack 123 RCA 107 109 144 147 151

Realistic 003 008 010 014 031

Rico 058 078 Salora 014 Samsung 102 040 032 104 107

Sansui 043 048 135 022

012 045

150 156

066

012 031 150 055 158

154 160 064

023

031 034 053 072 139 134

013 045 162

071

013 041 034 040 156 031 140

034 040 053 054 101

109 112 113 115 120 122 125 159

VCR CODE NUMBER

Sanyo 003 010 102 007 014

134

Scott 017 037 044 129 131

112 159

Sears 003 008 009 010 013

014 017 081 101 Sharp 031 054 053 Shintom 024 Signature 034 Sony 056 057 058 003 052

149 031 155 Soundesign 034 STS 013 Sylvania 031 059 034 067 Symphonic 034 Tandy 010 034 Tatung 039 043 023 Teac 034 039 043 023 Technics 031 070 Teknika 031 019 034 101 TMK 006 Toshiba 112 008 131 047 059

082 013 042 Totevision 040 101 Unitech 040 Vec to r Research Video Concepts Videosonic 040 Wards 003 013 024 031 034

Yamaha 012 043 034 039 Zenith 072 080 056 048 034

AUX-AUDIO CODE NUMBER

Adcom 146 149 227 244 AMC 083 084 Arcam 100 Audio File 093 098 Audio Technica Aiwa 111 114 117 156 170

Akai 181 233 Anam 180 Bose 064 137 219 B & K 150 152 Carver 013 098 107 126

Clarion 151 169 Denon 101 133 191 202 208

012

012 046 034 141

040 053 054 017 131

101 058

221

199 203 219 231 241

254

129 160 163 220

245 249

246 247

Page 8-3

Mitsubishi SR-HD5 HD DIRECTV Plus Receiver

AUX-AUDIO CODE NUMBER

Enlightened Audio Fisher 107 129 157 163 176 Fosgate Audionics GE 216 123 Harman Kardon Haitai 119 Hitachi 088 JCPenny 109 154 178 Jensen 099 Jerrold 141 JVC 112 198 252 Kenwood 096 104 119 125 148

Krell 223 Lexicon 215 250 Luxman 066 120 205 229 LXI 123 177 Magnavox 126 162 185 186 224

Marantz 074 105 126 128 139

McIntosh 251 Mondial 069 225 MCS 178 Mitsubishi 253 Meridian 013 067 NAD 128 Nakamichi 072 212 234 235 Niles 236 Onkyo 094 115 116 209 211

Optimus 121 125 140 181 Panasonic 131 144 187 200 Parasound 085 086 090 Philips 136 186 126 197 Pioneer 093 132 138 210 165

Quasar 131 187 RCA 109 213 166 Realistic 103 122 123 124 172

Rotel 204 218 239 Sansui 196 214 126 139 075

Sanyo 157 129 Samsung 068 Scott 180 190 Sharp 096 125 151 161 169

Sherwood 089 127 Sony 097 117 147 183 200

Soundstream 197

078 153

228 248

073 195 248 249

151 163 171 173 242

228

155 162 186 232

255

189 195 201 081 230

174 177 179 180 194

197

182 193

253 237 238 188 192

AUX-AUDIO CODE NUMBER AUX-CATV CODE NUMBER

Starcom 141 Symphonic 124 Teac 102 159 180 062 Technics 131 184 187 200 202

208 165 Toshiba 175 Wards 163 Yamaha 092 120 166 240 125

169 216 Zenith 222 061

AUX-LDP CODE NUMBER

California Audio Denon 043 044 Fisher 047 Kenwood 060 Magnavox 048 057 Mitsubishi 057 NAD 057 Optimus 049 Panasonic 047 051 054 Philips 048 Pioneer 055 057 Quasar 047 Radio Shack 056 RCA 046 Realistic 049 Runco 058 Sanyo 052 Sharp 060 Sony 050 053 Technics 047 051 054 Toshiba 060 Yamaha 045 059

AUX-DVD CODE NUMBER

Denon 030 GE 035 036 GLG 041 JVC 031 Magnavox 038 042 Marantz 042 Mitsubishi 032 Onkyo 038 Panasonic 033 Philips 038 042 Pioneer 034 Proscan 035 036 RCA 035 036 Samsung 029 040 Sony 037 Toshiba 038 Yamaha 039 Zenith 028 041

047

Hamlin 015 017 022 Jerrold/G.I. 010 021 025 Oak 008 016 023 Pioneer 007 026 027 Scientific/ Atlanta Tocom 003 Zenith 004

002 006 013

Page 8-4

Programming Your Remote Control

ACTI ON

Using the Remote Control

Once your device codes are entered, you are ready to start using your universal remote control. The device keys allow you to switch from one device to another. Some keys behave in a special way—they control one device while you are actually in another device mode. For instance, while in SAT (satellite) mode, pressing Volume +/- controls your TV’s volume—not the HD receiver’s volume. This is because the remote control knows that there is no volume control on the HD receiver.

Advanced feature keys (i.e., , ) are not supported for devices other than your HD receiver. For other devices, only the primary keys ( ,, , and ) will function.

For Sony-brand devices, use the key as the “Enter” key.

EXIT

POWER

SELECT

For RCA-brand devices, the device key (“TV” or “VCR”) may function as the “power on” key

POWER

and the “power off” key. For audio receivers and amps, you may use POWER, VOLUME, and MUTE.

Changing the Remote Control Address to Operate Other HD Receivers

Your remote control can be reprogrammed to operate different Mitsubishi HD receivers and satellite receivers. This may be necessary in situations where multiple Mitsubishi receivers are located in the same general area and can pick up signals intended for one specific receiver.

To switch the remote control, simply press and hold the key while entering the receiver ID. The receiver ID can be 001 (for Unit 1) through 008 (for Unit 8). Do not forget the two zeros when entering the receiver ID code number. Remember to access the ADVANCED PREFERENCES screen using the keys on the front of the HD receiver to pair it with the remote, refer to Chapter 7, “Advanced Preferences,” for this procedure.

The other way to program your remote control to match your HD receiver is to scan for the correct code.

1) Keep your remote control aimed at the device you want to control during this process. The remote control will send out the “power” command for the HD receiver.

SAT

2) While holding down the SAT key, press the “Mute” key for one full second. Then release the keys. The SAT key should light and stay lit (indicating programming mode). If it doesn’t, repeat the process.

3) Once you are in programming mode, repeatedly tap the key to step through the codes, sending out the power command, which could take up to eight presses. When your HD receiver shuts off, you have found the code.

4) Press the key to verify that you haven’t missed the code. In order to lock in the

POWER

code, press the SAT key again.

The remote will remember the code until you reprogram it.

Identifying Codes That Have Been Stored

You can identify the codes you stored in your remote control’s device keys. These codes can be used when programming additional remote controls.

1) Press the device key and the “Mute” key simultaneously.

2) Press the key and count the number of times the red light in the device key blinks. Each digit of the three-digit code is separated by a two-second period the light is off. For

ACTI ON

Page 8-5

Mitsubishi SR-HD5 HD DIRECTV Plus Receiver

example, if the code number is 021, the light will blink 10 times (for “0”), pause two seconds, blink two times (for “2”), pause two seconds, and then blink one time (for “1”).

Controlling Other Components Using the AUX Button

Some additional features are available when the remote control is in the AUX mode.

Volume Control in AUX Mode

When the remote control is in TV, VCR, or SAT mode, the volume keys control the TV’s volume. When the remote control is in AUX mode,the volume keys control the auxiliary device’s volume. If your auxiliary device does not have audio output, you can program the volume keysto control the TV’s volume when your remote control is in AUX mode by performing the following steps:

1) Press the “AUX” key and the “Mute” key simultaneously.

2) Press the “Vol um e Up ” key.

Once you perform these steps, whenever your remote control is in AUX mode the volume keys will control the television volume. In the event that you reprogram the “AUX” key to control a different component at some future time, you can restore the remote control’s capability to control the auxiliary component’s volume by simply repeating these two steps.

Assigning a Device to a Different Device Key

You can assign a device to a device key that has a different label. For example, you can assign a second TV to the “AUX” key:

1) While holding down the “AUX” key, press the “Mute” key. Then release both keys.

2) Press the device key associated with the type of device you wish to assign to the AUX key. In this example, you would press the TV key.

3) Enter the correct code. (To determine the code, use either the code scan or code entry method described earlier.)

4) Press the “AUX” key. The new device code is now stored in the “AUX” key, and the “AUX” key now controls the second TV.

Page 8-6

Questions and

APPENDIX

Answers

Questions? Did we forget to tell you something? Many people, over time, have questions about their satellite system. We have compiled the most frequently asked questions and their answers in this appendix. We hope they help!

Q I had a satellite signal but now I am getting a message “Searching for satellite signal. To

access related utilities, press .” What happened?

A Rain clouds and snow can affect the satellite signal reception. This loss of signal is

temporary. Also check for new growth on trees and bushes that could be blocking the signal. One other possibility is that the wind or someone has moved the satellite dish antenna.

Q Why can’t I control my TV?

A Before you can control your TV, VCR, or any other device, besides your HD receiver, you

must program your remote control to match your different devices. See the chapter, “Programming Your Remote Control” in this manual for specific instructions. If you have already successfully programmed your remote control, try pressing the appropriate device key to put your remote in the proper mode. Then try controlling that device. Also, make sure that the batteries in the remote control are good.

SELECT

Q Some channels look good, while others freeze or indicate that no signal is available. What’s

wrong?

A The most common causes for this behavior relate to an improperly grounded satellite cable.

Check the cable between your HD receiver and the satellite dish antenna. Confirm that RG-6 (not RG-59) cable is used and does not exceed 100 feet in length. Longer cable runs require amplification. This special amplifier is available from your dealer.

Q How can I watch one satellite program while recording another?

A With only one HD receiver, unfortunately, you can’t. Each receiver can only decode one

channel at a time.

Q I’m getting a message to call some extension. Why?

A There are many different reasons for this. If you want to watch the channel that is displaying

the message, call DIRECTV at 1-800-DIRECTV (1-800-347-3288).

Appendix A-1

Mitsubishi SR-HD5 HD DIRECTV Plus Receiver

Q Why don’t I have an on-screen offer to purchase pay per view programs?

A There are four possibilities: 1) Your HD receiver must be connected to a phone line;

2) Your HD receiver is connected to a phone line but DIRECTV does not realize that it is;

3) DIRECTV has disabled your ability to make on-screen purchases; or 4) the pay per view program is not available for purchase. Call DIRECTV at 1-800-DIRECTV (1-800-347-

3288), for assistance.

Q Can I receive my local TV programs through my HD receiver?

A There are three ways to receive local programming:

1) This receiver is able to receive local NTSC and ATSC channel from an antenna connected directly to the IN FROM ANT.

2) If you connect cable and a satellite dish antenna, you can receive the local “lifeline” or “broadcast basic” service.

3) With a satellite dish antenna and a subscription you may be able to receive some of your local channels directly from the satellite. The availability of local channels delivered directly from satellite will depend on your local area, the type of dish antenna and the subscription package you order from DIRECTV.

Q If I have questions about my satellite system or need to have it serviced, whom should I

call?

A For issues regarding your equipment, contact Mitsubishi Consumer Relations directly at 1-

800-332-2119. If you would like, call your dealer first. They are most familiar with your installation and needs. Also, they are likely to be local to you.

If you need assistance with your subscription, such as adding channels, contact DIRECTV at 1-800-DIRECTV (1-800-347-3288).

Q I thought I had set an event to record on my VCR but, when I played the tape back, nothing

was there. What could be wrong?

A There are several possible reasons for this. First, check that the HD receiver is properly

programmed to operated your VCR and that the IR emitter is properly attached to the front of the VCR. Make sure you have left the VCR turned on and set to the input that matches the output from your HD receiver (RF channel 3 or 4 or A/V Audio left and right with video or S-video). Also make sure your HD receiver is in SD output mode. Make sure you select PreSelect™ of the program was for recording and not viewing. Make sure the program is authorized for recording and not listed as “can’t tape.”

Q I picked up my telephone and it was making a hissing and squealing sound. Why?

A Your HD receiver was reporting any pay per view activity that may have occurred. This

happens very rarely and lasts for only a minute or so.

Q What if my question isn’t listed here?

A Call your dealer or Mitsubishi Consumer Relations at 1-800-332-2119. We will do our very

best to answer your questions.

Appendix A-2

Questions and Answers

Appendix A-3

Mitsubishi SR-HD5 HD DIRECTV Plus Receiver

Appendix A-4

Questions and Answers

Appendix A-5

Special

APPENDIX

Information

Special Information Concerning Selected High Definition Broadcasts

From time to time there may be some high definition (HD) broadcasts, delivered by satellite or cable, that will require HD receivers with special connectors in order to view such broadcasts in HD format. Primarily these broadcasts are expected to be pay-per-view events, movies or specials and first broadcasts of events, movies or specials that have special copy protection requirements. This HD receiver does not have the special connectors required to view these programs in HD format. These programs may also be broadcast on standard definition (SD) channels, which this receiver will be able to receive. In this case your on-screen displays will advise you to select the SD channel in order to view the program.

Special Information Concerning Stationary Images or Letterbox Images

For best performance and longest life, the normal use of a TV should include a mixture of TV picture types. The most frequently used picture types should fill the screen with constantly moving images rather than stationary images or patterns. Displaying the same stationary patterns over extended periods of time, or displaying the same stationary patterns frequently, can cause uneven aging of the TV picture tubes and leave a subtle, but permanent, ghost image. Most TV warranties do not cover this type of damage to the picture tubes. To avoid this, mix your viewing pattern. Do not show the same stationary image for more than 15 percent of your total TV viewing in any one week. Display constantly moving and changing images that fill the screen whenever possible. We also recommend that you reduce the contrast setting of your TV when you watch that type of image. We also recommend that you normally use the “cropped” setting in this receiver’s AV Setup Menu. When possible, you may wish to use your television’s PIP, POP, ZOOM, EXPAND, or other picture shape controls so that the moving images fill the screen.

Please check your TV’s owner’s guide for other recommendations.

Examples of stationary images include:

● Letterbox top/bottom bars. These are solid colored bars that appear when showing a

wide-screen (16:9) image on a standard (4:3) TV.

● Side panels. These are the solid-colored side bars when showing standard-shaped (4:3)

TV images on a wide-screen (16:9) TV.

● Information banners on music-only channels from satellite. During the enjoyment of

music-only channels from DIRECTV, we recommend that you connect the HD receiver to your stereo system, and then turn off the TV after you have selected your desired music channel.

Appendix B-1

Mitsubishi SR-HD5 HD DIRECTV Plus Receiver

● Stock-market report bars. These include the ticker bar constantly running at the bottom

of the TV screen on financial news channels.

● Shopping channel logos & pricing displays. These include bright graphics that are

shown constantly or repeatedly in the same location.

● Video game patterns and scoreboards.

● Bright station logos. Moving or low-contrast graphics are less likely to cause uneven

aging of the picture tubes.

● On-line (internet) web sites. In addition, any other stationary or repetitive computer

style images from any source may cause uneven aging of the picture tubes.

Appendix B-2

MITSUBISHI

DIRECTV and DIRECTV PLUS

 Receivers and Satellite Dish Antenna

LIMITED WARRANTY

MITSUBISHI DIGITAL ELECTRONICS AMERICA, INC. ("MDEA") warrants to the original purchaser of this DIRECTV or DIRECTV PLUS Receiver or satellite dish antenna, if purchased from an authorized MITSUBISHI Audio/Video Dealer that, should it prove defective by reason of improper workmanship and/or material:

a. Receivers, Satellite Dish Antennas and LNB(s). For one year from the date of original purchase at retail, we will repair

b. RF Remote control adapters and RF remote control receivers. For ninety (90) days from the date of original purchase

c. NOTICE: To obtain warranty service, you must notify MDEA of any defect within the applicable warranty time period.

1. TO OBTAIN WARRANTY SERVICE, contact MDEA at 1-800-332-2119 or write to us at the address below. Specific authorization must be obtained from MDEA prior to receiving warranty repair or replacement. Shipping expenses are your responsibility. Proof of purchase date from an authorized MITSUBISHI Dealer is required when requesting warranty service. Enclose your sales receipt or other document which establishes proof and date of purchase.

2. THIS WARRANTY DOES NOT COVER damage caused by: modification, alteration, repair or service of this product by anyone other than as expressly authorized by MDEA; physical abuse to, or misuse of, the DIRECTV Receiver, DIRECTV PLUS Receiver, satellite dish antenna or LNB(s); operation or installation in a manner contrary to the instructions which accompany the product; freight damage; or any damage caused by acts of God such as lightning or fluctuation in electrical power. This warranty also excludes all costs arising from installation, satellite programming access charges, telephone charges, adjustment of user controls, external antenna systems, service of products purchased or serviced outside the U.S.A., initial technical adjustments (set-up) and user-required maintenance. Consult the operating instructions enclosed with the product for information regarding user controls and satellite dish antenna installation. This warranty does not cover reception or transmission problems caused by signal conditions, telephone lines, cable antenna or satellite systems outside the unit. This warranty does not cover any product used for commercial or institutional purposes. IMPORTANT NOTE: DIRECTV separate and distinct from this product (hardware) warranty. Your telephone communication connection is not warranted to be a local telephone call. DIRECTV tain a valid subscription directly from DIRECTV. This product will not provide satellite programming access without such subscription. If you have satellite programming access or subscription questions, please contact DIRECTV, at 1-800-DIRECTV.

3. ANY EXPRESS WARRANTY NOT PROVIDED HEREIN, AND ANY REMEDY WHICH, BUT FOR THIS PROVISION, MIGHT ARISE BY IMPLICATION OR OPERATION OF LAW, IS HEREBY EXCLUDED AND DISCLAIMED. THE IMPLIED WARRANTIES OF MERCHANTABILITY AND OF FITNESS FOR ANY PARTICULAR PURPOSE ARE EXPRESSLY LIMITED TO A TERM OF ONE YEAR.

4. UNDER NO CIRCUMSTANCES SHALL MDEA BE LIABLE TO PURCHASER OR ANY OTHER PERSON FOR ANY INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES, WHETHER ARISING OUT OF BREACH OF WARRANTY, BREACH OF CONTRACT, OR OTHERWISE.

5. Some states do not allow limitations on how long an implied warranty lasts, or the exclusion or limitation of incidental, special, or consequential damages, so the above limitations or exclusions may not apply to you.

6. This warranty gives you specific legal rights and you may also have other rights which vary from state to state.

7. BEFORE REQUESTING SERVICE, please review the instruction booklet to insure proper installation and correct customer control adjustment. If the problem persists, contact MDEA at 1-800-332-2119 or write us at the address below.

or replace, at our option, any defective product without charge for the product. Repaired or replaced products are warranted for the remainder of the original warranty period.

at retail, we will repair or replace, at our option, any defective RF remote control adapter or RF remote control receiver without charge for the part.



Programming (satellite programming access) is



Programming is a subscription service independent from this product. You must obtain and main-

MITSUBISHI DIGITAL ELECTRONICS AMERICA, INC.

9351 Jeronimo Ave. Irvine, CA 92618-1904

PACKING INSTRUCTIONS FOR EQUIPMENT TO BE RETURNED

1. Call Mitsubishi Consumer Relations. The Consumer Relations Advisor will give you an RPA (Return Product Authorization) and a mailing address for returning your unit. Units without RPA numbers will be refused.

2. If you are returning the digital satellite receiver, please keep your access card and return only the digital satellite receiver. Mitsubishi will not replace any additional parts that you may send. Replacement of those parts will be at your expense.

3. Pack the unit in the original box and packing material, if possible, or in other packaging that provides adequate protection for shipping. Include your name, address, phone number, the model number and serial number, and a copy of the bill of sale.

4. Write: “Attention: RPA #” (the number given to you by the Consumer Relations Advisor) on the return shipping label.

5. Shipping the unit to Mitsubishi is at your expense. We do advise that you ship via a traceable means and insure the shipment for the full replacement value.

Part # 1029564-0001 (Revision: A)

Mitsubishi Electronics SR-HD5 User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual