Mitsubishi Electric SP-321V Quick Start Manual

SP-321V

Optional Accessory Speakers for LDT321V LCD Monitor

Part Number
Frequency

Response
Power

Dimensions (WxHxD)

Weight

SP-321V (designed for
LDT321V)

100Hz – 20kHz
7W + 7W @ 8 ohms with

10% THD

2.9” x 18.75” x 3.3”

73.6 x 476 x 83.82mm

2.0 lbs (net)
Speakers (2), Speaker wire

Contents

(2), Mounting brackets (4),
Speaker screws (12), Quick
Start Guide

Follow these steps to connect the speakers to
your LCD monitor:

1. Turn off the power switch on the LCD.

2. Screw appropriate mounting brackets into the

appropriate position on each speaker (2
brackets per speaker) using black screws.
Figure 1. (2 screws per bracket.)

3. Screw mounting brackets / speakers to the
LCD using one (1) black screw per bracket.
Figure 2.

4. Once both speakers are attached to the LCD,
connect the speaker wires to the terminals on
the LCD and then to the terminals on
attached speakers. Figure 3.

5. Turn the LCD power on.

MITSUBISHI DIGITAL ELECTRONICS AMERICA, INC.

Presentation Products Division
Toll Free: 888.307.03479
Email: [e-mail]

www.mitsubishi-presentations.com

Canada

Mitsubishi Electric Sales Canada Inc.

Information Technologies
Phone:[phone]

2.9”

(73.7mm)

: [e-mail]

www.mitsubishielectric.ca

18.75”

(476mm)

(234mm)

3.3”

(83.8mm)

©2007 Mitsubishi Digital Electronics America,
Inc. Standard features, options and
specifications subject to change without
notice. All trademarks are the property of their
respective holders.

1.6”

(41mm)

1.2”

(30mm)

9.2”

1.2”

(30mm)