Mitsubishi Electric PAR-WT40R-E, PAR-WR41R-E Installation Manual
English
Installation and Setting Manual
For safe and correct use, please read this manual thoroughly before operating the PAR-WT40R-E and PARWR41R-E devices.
FOR INSTALLER
Deutsch
Français
Nederlands
Español
Italiano
Português
Dansk
Svenska
Norsk
Suomi
Installations- og indstillingsvejledning
Læs venligst denne vejledning grundigt inden betjening af enhederne PAR-WT40R-E og PAR-WR41R-E af
hensyn til sikker og korrekt brug.
TIL INSTALLATØR
Installations- und Konfigurationsanleitung
Lesen Sie sich zur sicheren und korrekten Verwendung diese Anleitung bitte sorgfältig durch, bevor Sie die
Geräte PAR-WT40R-E und PAR-WR41R-E verwenden.
FÜR DEN INSTALLATEUR
Manuel d'installation et de configuration
Pour garantir une utilisation sûre et appropriée, lisez attentivement le présent mode d'emploi avant d'utiliser
les dispositifs PAR-WT40R-E et PAR-WR41R-E.
POUR LES INSTALLATEURS
Handleiding voor installeren en instellen
Voor een veilig en juist gebruik moet u deze handleiding goed doorlezen alvorens de PAR-WT40R-E en PARWR41R-E apparaten in gebruik te nemen.
VOOR DE INSTALLATEUR
Manual de Instalação e Definição
Para uma utilização segura e correcta, é favor ler cuidadosamente este manual antes de trabalhar com os
dispositivos PAR-WT40R-E e PAR-WR41R-E.
PARA O INSTALADOR
Manual de instalación y configuración
Para un uso correcto y seguro de los dispositivos PAR-WT40R-E y PAR-WR41R-E, lea este manual antes de
su utilización.
PARA EL INSTALADOR
Manuale di installazione e impostazione
Per un uso corretto e sicuro, leggere attentamente il presente manuale prima di utilizzare i dispositivi PARWT40R-E e PAR-WR41R-E.
PER L'ADDETTO ALL'INSTALLAZIONE
Installations- och Inställningsmanual
För säker och korrekt användning, var god läs denna manual noggrant innan du använder PAR-WT40R-Eoch PAR-WR41R-E-enheterna.
FÖR INSTALLATÖREN
Installasjons- og konfigurasjonsanvisning
Les denne bruksanvisningen nøye før du bruker PAR-WT40R-E og PAR-WR41R-E, for å sikre trygg og riktig
bruk.
FOR INSTALLATØREN
Asennus- ja asetusopas
Turvallisen ja asianmukaisen käytön varmistamiseksi lue tämä käyttöopas huolellisesti ennen PAR-WT40R-Eja PAR-WR41R-E-laitteiden käyttöä.
ASENTAJALLE
ATW WIRELESS SYSTEM
PAR-WT40R-E
PAR-WR41R-E
1. Safety Precautions ...............................1
2. Accessories and Installation Tool .........3
3. Before using ATW wireless system ......3
4. Installing the Wireless Receiver ...........4
4.1 Connecting to the Cylinder unit ........4
4.2 Connecting to the Hydrobox unit ......8
5.
Setting the Wireless Remote Controllers
..10
5.1.Viewing the Address Number .........11
5.2.Pairing ............................................12
5.3.Switching the Temperature Unit ....14
Contents
5.4.Communication Test ......................14
5.5.Displaying or Hiding the Room
Temperature ..................................15
6. Wireless Receiver Operation ..............16
6.1.
Functions of Buttons and Displays
..16
6.2.Turning on Power ...........................17
6.3.Wireless Receiver Functions ..........17
7. Q&A ....................................................18
8. Specications .....................................19
1
Warning
►Installation
Do not use the device in particular environments.
Do not use the device in particular environments
where the following substances are present in
large amounts: oil, vapour, organic solvent, corrosive gas (such as ammonia, sulphuric compounds,
and acid or the like), or where acid or alkali solution, or particular sprays are used frequently. This
could affect operating performance, or cause
corrosion, which could result in electrical shock,
breakdown, smoke generation, or re.
Do not place the devices in an environ-
ment where ammable gas may occur,
stay, ow in, or leak.
Build-up of flammable gas could result in fire or
explosion.
1. Safety Precautions
● The precautions mentioned below are important to use the device safely. Be sure to understand and follow them.
●
The following hazardous classification shows the likelihood and severity of hazards if a person does not follow the instructions contained on the following signs.
Warning
Indicates a hazardous situation which, if a person does not follow the instructions, could result in death or serious injury.
Caution
Indicates a potentially hazardous situation that, if a person does not follow the
instructions, may result in bodily injury or property damage.
This manual explains installation of the PAR-WR41R-E wireless receiver and the
PAR-WT40R-E wireless remote controller, and settings of these devices. Before installing the devices, read this manual thoroughly. After reading, be sure to hand this
manual to the user.
2
Caution
Do not drop the device. This could break the case or affect the device enough
to make it inoperable.
Install the device in a place capable of bearing its own weight .
If the device is not installed securely or properly, the
wireless receiver may fall.
Disposal
This symbol mark is for EU countries only.
This symbol mark is according to the directive 2002/96/EC Article 10 Information for users and Annex IV, and/or to the directive 2006/66/EC Article 20 Information for end-users
and Annex II.
Your MITSUBISHI ELECTRIC product is designed and manufactured with high quality materials and components which can be recycled and/or reused. This symbol means that electrical
and electronic equipment, batteries and accumulators, at their end-of-life, should be disposed
of separately from your household waste. If a chemical symbol is printed beneath the symbol,
this chemical symbol means that the battery or accumulator contains a heavy metal at a certain concentration.
This will be indicated as follows: Hg: mercury (0.0005%), Cd; cadmium (0.002 %), Pb: lead (0.004%)
In the European Union there are separate collection systems for used electrical and electronic products,
batteries and accumulators.
Please, dispose of this equipment, batteries and accumulators correctly at your local community waste collection/recycling centre.
Please, help us to conserve the environment we live in!
Warning
The device must be installed by a
dealer or an authorised technician according to the appropriate installation
manual.
If the device is installed improperly, electric shock
or re could result.
Do not place the device in an environment that exposes it to large amounts
of vapor or condensation.
Electric shock, re, or breakdown could result.
►Wiring
The wireless receiver’s maximum voltage is 12V DC. Do not connect 230V
AC power source to the wireless receiver.
Breakdown, ignition, or re could result.
Connections must be made securely
and without tension or external force
on the terminals.
If connections are made improperly, breaking of
wire, heat generation, or re could result.
►Others
Do not use sharp objects to press the
buttons.
Electric shock or breakdown may result.
Do not touch or operate the device with
wet hands.
Electric shock or breakdown may result.
Do not wash the device with water or
solution or the like.
Electric shock or breakdown may result.
When installing or repairing the device,
ask a dealer or a qualied technician.
If the device is not installed properly, electric
shock, smoke generation, or re could result from
entry of dust or water.
Do not disassemble or modify.
3
2. Accessories and Installation Tool
The following items are included in the box.
Item Nos.
Wireless receiver <PAR-WR41R-E>
(2 m long cable included)
1
Bracket 1
Flat head screw (4.1 × 6) 4
Installation and setting manual 1
* Installing of the devices requires a Phillips-head screwdriver (No.2 6 mm).
3. Before using ATW wireless system
Following is the summary of the procedure for installing and setting the wireless system.
1. Devices and manuals required to set and install the wireless system
PAR-WR40R-E wireless remote controller
PAR-WR41R-E wireless receiver
ATW wireless system installation and setting manual (this manual)
Wireless remote controller operation manual
(hereinafter abbreviated as OM)
ATW system installation manual
(hereinafter abbreviated as IM)
2. Installing and setting procedure
Power off the ATW system.
Install the wireless receiver on the ATW system.
(See "4. Installing the Wireless Receiver" in
this manual
.)
When installing the wireless receiver, be sure to set the SW1-8 on the control
board to ON. (See “5.1 DIP Switch Functions” in IM. )
Power on the ATW system, and the LEDs will blink on the receiver for 3 seconds.
Place two size AA alkaline batteries in the wireless remote controller.
(See “·Battery” in “4. Before Operation” in OM.)
Perform pairing process between the wireless receiver and the remote controller.
(See “5.2. Pairing” in "5. Setting the Wireless Remote Controllers” in
this manual
.)
The wireless receiver goes through a pairing process only while the ATW system
is off. When the system is ON, be sure to turn it off before beginning the pairing
process.
4
4. Installing the Wireless Receiver
4.1 Connecting to the Cylinder unit
* Before installation, be sure to turn off the main power supply.
Remove the handle by removing four screws.
Remove the two screws that hold the front panel, and remove the panel.
Screws
(2 positions)
Front panel
If the removed front panel is set aside away from the indoor unit, ensure the relay
connector on the main controller is disconnected.
Handle
Test wireless communication between the wireless remote controller and the wireless
receiver.
(See “5.4 Communication Test” in “5. Setting the Wireless Remote Controllers” in
this
manual
.)
Position the wireless remote controller in an appropriate place.
(See "4. Before Operation" in OM.)
To set the wireless remote controller as a room sensor that monitors room temperature,
see "5.4 Main Controller Initial Settings" in IM.
Use the main controller to set the ATW system to the room temp. ( ) mode.
When the ow temp. ( ) mode or the compensation curve ( ) mode is selected, the
wireless remote controller will operate as a thermostat. (See “■ Initial Settings” of “5.4 Main
Controller” in IM.)
When the remote controller set as a room sensor runs out of battery or gets a
communication error during room temp. mode, the room temp. mode will automatically switch to the compensation curve mode.
The room temp. mode will be restored by battery replacement or solution of com-
munication error.
Installation and setting of the wireless remote controller is complete. To set additional
wireless remote controllers, repeat from Step to .
Screws (4 positions)Screws
5
Remove the four screws to remove the electrical box cover.
Electrical box cover
Screws
(2 positions)
Screws
(2 positions)
Run the receiver's cable into the cylinder unit
through the left-most opening on top of the
unit.
Remove the two screws to pull the electrical box so that the electrical box is swung toward
you from right.
Electrical box
Electrical box
Screws
(2 positions)
Do not run the receiver's cable through an
opening that a power cable goes through
and do not bundle the cable together with a
power cable.
6
Route the cable out the back of the electrical box, and run the cable into the box through any
of the shown openings on the underside of the box.
Electrical box
Electrical box
Control board
Connect the cable connector to the CNRF terminal on the control board. Switch ON SW1-8.
CNRF
Remove excessive slack on the cable and secure the cable with two cable fasteners on the
side of the electrical box.
Electrical box
Back of electrical box
Cable
fasteners
Any of these 2 openings
SW1
Loading...