Mitsubishi MSZ-FS18NA, MUZ-FS18NAH Submittal

Download

MSZ-FS18NA & MUZ-FS18NAH

18,000 BTU/H DELUXE WALL MOUNT

18,000 BTU/H HYPER-HEATING OUTDOOR UNIT W/BASE PAN HEATER

Job Name:

System Reference: Date:

Indoor Unit MSZ-FS18NA

Outdoor Unit MUZ-FS18NAH

INDOOR UNIT FEATURES

• Slim wall-mounted indoor units provide zone comfort control

• Dual Barrier Coating applied to the heat exchanger, vanes and fan to prevent hydrophilic and hydrophobic dirt build-up

• Multiple fan speed options: Quiet, Low, Medium, High, Super-high, Auto

• 3D i-see Sensor ○ Indirect or Direct Airow for personalized comfort ○ Absence Detection for energy-saving mode ○ Double Vane features: ○ Separates airow to deliver air across a large area ○ Simultaneously deliver to air separate sections of a room ○ Generates more comfortable natural airow pattern

• Multiple control options available: ○ Back-lit screen handheld remote controller (provided with unit) ○ kumo cloud ○ Third-party interface options ○ Wired or wireless controllers

• Triple-action Filtration: Nano Platinum Filter, Deodorizing Filter, & Electrostatic Anti-Allergy Enzyme Filter

• Hot-Start Technology: no cold air rush at equipment startup or when restarting after Defrost Cycle

• Quiet operation

OUTDOOR UNIT FEATURES

• INVERTER-driven compressor and LEV provide high efciency and comfort while using only the energy needed to maintain maximum performance

• H2i plus

• Blue Fin anti-corrosion treatment applied to the outdoor unit heat exchanger for increased coil protection and longer life

• Built-in base pan heater

enables advance features:

smart device app for remote access

performance offers 100% heating capacity at -5° and 70% to 81% heating capacity at -13° F

SPECIFICATIONS: MSZ-FS18NA & MUZ-FS18NAH

test

Maximum Capacity BTU/H 21,000

Rated Capacity BTU/H 17,200

Minimum Capacity BTU/H 6,450

Cooling at 95°F

Maximum Power Input W 2,220

Rated Power Input W 1,375

Moisture Removal Pints/h 4.8

Sensible Heat Factor 0.69

Power Factor % 98.0/98.0

Maximum Capacity BTU/H 30,000

Rated Capacity BTU/H 19,000

Heating at 47°F

Minimum Capacity BTU/H 5,150

Maximum Power Input W 4,000

Rated Power Input W 1,610

Power Factor % 98.0/98.0

Maximum Capacity BTU/H 27,000

Heating at 17°F

Rated Capacity BTU/H 12,800

Maximum Power Input W 3,820

Rated Power Input W 1,280

Heating at 5°F

Heating at -5°F

Heating at -13°F

Efciency

Maximum Capacity BTU/H 23,000

Maximum Power Input W 3,250

Maximum Capacity BTU/H 19,000

Maximum Capacity BTU/H 17,100

SEER 21.0

EER

HSPF [IV] 12.0

COP at 47°F

COP at 17°F at Maximum Capacity

COP at 5°F at Maximum Capacity

COP at -5°F at Maximum Capacity

COP at -13°F at Maximum Capacity

ENERGY STAR® Certied Yes

Voltage, Phase, Frequency 208/230, 1, 60

Guaranteed Voltage Range V AC 187 - 253

Voltage: Indoor - Outdoor, S1-S2 V AC 208/230

Electrical

Voltage: Indoor - Outdoor, S2-S3 V DC 24

Short-circuit Current Rating [SCCR] kA 5

Recommended Fuse/Breaker Size (Oudoor) A 20

Recommended Wire Size [Indoor - Outdoor] AWG 14

MCA A 1.0

Fan Motor Full Load Amperage A 0.65

Fan Motor Output W 40

Airow Rate at Cooling, Dry CFM 225–262–304–355–437

Airow Rate at Cooling, Wet CFM 194–225–261–305–376

Airow Rate at Heating, Dry CFM 201–272–350–410–514

Sound Pressure Level [Cooling] dB[A] 27–31–35–39–44

Indoor Unit

Sound Pressure Level [Heating] dB[A] 25–31–37–40–46

Drain Pipe Size In. [mm] 5/8 [15.88]

Coating on Heat Exchanger Dual Barrier Coating

External Finish Color Munsell 1.0Y 9.2/0.2

Unit Dimensions W x D x H: In. [mm] 36-7/16 x 9-3/16 x 12 (+11/16) [925 x 234 x 305 (+17)]

Package Dimensions W x D x H: In. [mm] 39 x 12-1/4 x 15-1/2 [990 x 310 x 400]

Unit Weight Lbs. [kg] 29 [13.5]

Package Weight Lbs. [kg] 34 [15.4]

Indoor Unit Operating Temperature

Range

NOTES: AHRI Rated Conditions (Rated data is determined at a xed compressor speed)

Conditions

*Outdoor Unit Operating Temperature Range (Cooling Air Temp (Maximum / Minimum)):

• Applications should be restricted to comfort cooling only; equipment cooling applications are not recommended for low ambient temperature conditions.

• For P-Series only: » Wind bafes required to operate below 23°F DB in cooling mode. » Cooling-only system with wind bafe: -40°F - 115°F. » Heat pump system with wind bafe: 0°F - 115°F. » Refer to wind bafe documentation for further information.

**Outdoor Unit Operating Temperature Range (Cooling Thermal Lock-out / Re-start Temperatures; Heating Thermal Lock-out / Re-start Temperatures):

• System cuts out in heating mode to avoid thermistor error and automatically restarts at these temperatures.

SEACOAST PROTECTION (ONLY APPLIES TO P-SERIES -BS MODELS)

• External Outer Panel: Phosphate coating + Acrylic-Enamel coating

• Fan Motor Support: Epoxy resin coating (at edge face)

• Separator Assembly Valve Bed: Epoxy resin coating (at edge face)

• Blue Fin treatment is an anti-corrosion treatment that is applied to the condenser coil to protect it against airborne contaminants.

Cooling Intake Air Temp [Maximum / Minimum]* °F 90 DB, 73 WB / 67 DB, 57 WB

Heating Intake Air Temp [Maximum / Minimum] °F 80 DB / 70 DB

Cooling (Indoor // Outdoor) °F 80 DB, 67 WB // 95 DB, 75 WB

Heating at 47°F (Indoor // Outdoor) °F 70 DB, 60 WB // 47 DB, 43 WB

Heating at 17°F (Indoor // Outdoor) °F 70 DB, 60 WB // 17 DB, 15 WB

Heating at 5°F (Indoor // Outdoor) °F 70 DB, 60 WB // 5 DB, 4 WB

Heating at -4°F (Indoor // Outdoor) °F 70 DB, 60 WB // -4 DB, -5 WB

Heating at -5°F (Indoor // Outdoor) °F 70 DB, 60 WB // -5 DB, -6 WB

Heating at -13°F (Indoor // Outdoor) °F 70 DB, 60 WB // -13 DB, -14 WB

12.5

3.46

2.07

1.91

SPECIFICATIONS: MSZ-FS18NA & MUZ-FS18NAH

test

MCA A 18.0

MOCP A 20

Fan Motor Full Load Amperage A 0.93

Fan Motor Output W 50

Airow Rate CFM 1801/1949

Refrigerant Control LEV

Defrost Method Reverse Cycle

Outdoor Unit

Coating on Heat Exchanger Blue Fin Coating

Sound Pressure Level, Cooling

Sound Pressure Level, Heating

Compressor Type Twin Rotary

dB(A) 52

dB(A) 55

Compressor Model SNB172FQKMT

Compressor Rated Load Amps A 17.0

Compressor Locked Rotor Amps A 13.6

Compressor Oil Type // Charge oz. FV50S // 0.40

External Finish Color Munsell 3Y 7.8/1/1

Base Pan Heater Built-in

Unit Dimensions W x D x H: In. [mm] 33-1/16 x 13 x 34-5/8 [840 x 330 x 880]

Package Dimensions W x D x H: In. [mm] 38-3/4 x 16-3/4 x 39 [980 x 420 x 990]

Unit Weight Lbs. [kg] 118 [53.5]

Package Weight Lbs. [kg] 135 [61]

Cooling Air Temp [Maximum / Minimum]* °F 115 DB / 14 DB

Outdoor Unit Operating Temperature

Range

Cooling Thermal Lock-out / Re-start Temperatures** °F -4 / 0

Heating Air Temp [Maximum / Minimum] °F 75 DB, 65 WB / -13 DB, -14 WB

Heating Thermal Lock-out / Re-start Temperatures** °F -18 / -14

Type R410A

Refrigerant

Charge Lbs, oz 3, 7

Chargeless Piping Length Ft. [m] 25 [7.5]

Additional Refrigerant Charge Per Additional Piping Length oz./Ft. [g/m] 0.216 [20]

Gas Pipe Size O.D. [Flared] In.[mm] 1/2 [12.7]

Liquid Pipe Size O.D. [Flared] In.[mm] 1/4 [6.35]

Piping

Maximum Piping Length Ft. [m] 100 [30]

Maximum Height Difference Ft. [m] 50 [15]

Maximum Number of Bends 10

NOTES: AHRI Rated Conditions (Rated data is determined at a xed compressor speed)

Conditions

*Outdoor Unit Operating Temperature Range (Cooling Air Temp (Maximum / Minimum)):

• Applications should be restricted to comfort cooling only; equipment cooling applications are not recommended for low ambient temperature conditions.

**Outdoor Unit Operating Temperature Range (Cooling Thermal Lock-out / Re-start Temperatures; Heating Thermal Lock-out / Re-start Temperatures):

• System cuts out in heating mode to avoid thermistor error and automatically restarts at these temperatures.

SEACOAST PROTECTION (ONLY APPLIES TO P-SERIES -BS MODELS)

• External Outer Panel: Phosphate coating + Acrylic-Enamel coating

• Fan Motor Support: Epoxy resin coating (at edge face)

• Separator Assembly Valve Bed: Epoxy resin coating (at edge face)

• Blue Fin treatment is an anti-corrosion treatment that is applied to the condenser coil to protect it against airborne contaminants.

Cooling (Indoor // Outdoor) °F 80 DB, 67 WB // 95 DB, 75 WB

Heating at 47°F (Indoor // Outdoor) °F 70 DB, 60 WB // 47 DB, 43 WB

Heating at 17°F (Indoor // Outdoor) °F 70 DB, 60 WB // 17 DB, 15 WB

Heating at 5°F (Indoor // Outdoor) °F 70 DB, 60 WB // 5 DB, 4 WB

Heating at -4°F (Indoor // Outdoor) °F 70 DB, 60 WB // -4 DB, -5 WB

Heating at -5°F (Indoor // Outdoor) °F 70 DB, 60 WB // -5 DB, -6 WB

Heating at -13°F (Indoor // Outdoor) °F 70 DB, 60 WB // -13 DB, -14 WB

INDOOR UNIT ACCESSORIES: MSZ-FS18NA

□

□□□

□

□□□

□

□□□

□

□□□

□

and Modbus Interface

BACnet

CN24 Relay Kit

IT Extender

kumo station

Control Interface

Remote Sensor

Wired Remote Controller

Wireless Remote Controller kumo touch

Condensate

Disconnect Switch

Filter

Lineset

NOTES:

†

Requires MAC-334IF-E

• M-Series EZ FIT

Allows indoor units to connect to an MA Controller:

Deluxe MA Remote Controller Simple MA Controller Touch MA Controller

‡

PAC-SF40RM-E (Unable to use with wireless remote controller)

• M-Series Ceiling Cassette, Ceiling Suspended, Horizontal-ducted and Multi-position Air Handler

• P-Series Ceiling Cassette, Ceiling Suspended, Horizontal-ducted and Multi-position Air Handler

Recessed Ceiling Cassette, Floor-mount and Wall-mount

Lockdown bracket for remote controller

System Control Interface

Thermostat Interface

USNAP Adapter

Wireless Interface for kumo cloud

Wired Remote Sensor

Wireless temperature and humitity sensor for kumo cloud

Deluxe Wired MA Remote Controller

Simple MA Remote Controller

Touch MA Controller

Blue Diamond (MicroBlue) Mini Condensate Pump (110/208/230V) up to 18,000 BTU/H

Blue Diamond Alarm Extension Cable — 6.5 Ft.

Blue Diamond MultiTank — collection tank for use with multiple pumps

Blue Diamond Sensor Extension Cable — 15 Ft.

Drain Pan Level Sensor/Control

Fascia Kit for MicroBlue Pump, mounts the MicroBlue and sensor directly beneath indoor unit

Sauermann Condensate Pump

(30A/600V/UL) [ts 2” X 4” utility box] - Black

(30A/600V/UL) [ts 2” X 4” utility box] - White

Electro Static Anti-allergy Enzyme Filter

Platinum Deodorizing Filter

15’ x 1/4” x 15’ / 1/2” Lineset (Twin-Tube Insulation)

30’ x 1/4” x 30’ / 1/2” Lineset (Twin-Tube Insulation)

50’ x 1/4” x 50’ / 1/2” Lineset (Twin-Tube Insulation)

65’ x 1/4” x 65’ / 1/2” Lineset (Twin-Tube Insulation)

for kumo cloud

™

RedLINK™ Wireless Controller

†

PAC-UKPRC001-CN-1

CN24RELAY-KIT-CM3

PAC-WHS01IE-E

PAC-WHS01HC-E

RCMKP1CB

MAC-334IF-E

PAC-US444CN-1

PAC-WHS01UP-E

PAC-USWHS002-WF-2

M21EAA307

PAC-USWHS003-TH-1

PAR-40MAAU

PAC-YT53CRAU-J

PAR-CT01MAU-SB

MHK2

X85-003

C13-192

C21-014

C13-103

SS610E

T18-016

SI30-230

TAZ-MS303

TAZ-MS303W

MAC-2330FT-E

MAC-3000FT-E

MLS141212T-15

MLS141212T-30

MLS141212T-50

MLS141212T-65

OUTDOOR UNIT ACCESSORIES: MUZ-FS18NAH

□

□□□

□

□□□

Condensate Drain Socket

Hail Guards Hail Guard

14 Gauge, 4 wire MiniSplit Cable—250 ft. roll

Mini-Split Wire

Mounting Pad

Stand

14 Gauge, 4 wire MiniSplit Cable—50 ft. roll

16 Gauge, 4 wire MiniSplit Cable—250 ft. roll

16 Gauge, 4 wire MiniSplit Cable—50 ft. roll

Condensing Unit Mounting Pad: 16” x 36” x 3”

Outdoor Unit 3-1/4 inch Mounting Base (Pair) - Plastic

18” Single Fan Stand

24” Single Fan Stand

Condenser Wall Bracket

Condenser Wall Bracket -Stainless Steel Finish

Outdoor Unit Stand — 12” High

MAC-871DS

HG-A7

S144-250

S144-50

S164-250

S164-50

ULTRILITE1

DSD-400P

QSMS1801M

QSMS2401M

QSWB2000M-1

QSWBSS

QSMS1201M

Unit: inch

INDOOR UNIT DIMENSIONS: MSZ-FS18NA

(06/09/12 KBTU/H)

(15/18 KBTU/H)

Unit: inch

OUTDOOR UNIT DIMENSIONS: MUZ-FS18NAH

REQUIRED SPACE

BASICALLY OPEN

20 in OR MORE WITHOUT

ANY OBSTRUCTION

IN FRONT AND BOTH

SIDES OF THE UNIT.

4 in OR MORE.

16-7/16

AIR IN

↓

DRAIN HOLE ø1-21/32

14 in OR MORE.

HANDLE

→

AIR IN

OVAL HOLES 2× 3/8 ×13/16

34-5/8

17-25/32

5/16

6-7/8 19-11/16

AIR OUT

↓

33-1/16 3-3/16

1-9/16

14-5/8

13-3/4

BOLT PITCH FOR

INSTALLATION

11/16

SERVICE PANEL

VALVE COVER

6-1/2

SERVICE PORT

15-3/8

3-29/32

19/32

7-11/16

20 in OR MORE. OPEN TWO SIDES OF RIGHT OR REAR SIDE.

LIQUID REFRIGERANT PIPE JOINT

GAS REFRIGERANT PIPE JOINT

4 in OR MORE.

FLARED ø6.35 (1/4”) FLARED ø12.7 (1/2”)

1340 Satellite Boulevard Suwanee, GA 30024

Toll Free: 800-433-4822 www.mehvac.com

FORM# MSZ-FS18NA-U1 & MUZ-FS18NAH-U1 - 202101

Mitsubishi MSZ-FS18NA, MUZ-FS18NAH Submittal

Specifications and Main Features

Frequently Asked Questions

User Manual