Mitsubishi FX5-65EC, FX5-30EC User Manual
JY997D65501B
Side
B
Side
JAPANESE
A
Side
ENGLISH
B
Side
CHINESE
C
MELSEC iQ-F FX5-30EC, FX5-65EC
Hardware Manual
Manual Number JY997D65501
Revision B
Date October 2019
This manual describes the dimensions and installation of the product. Before use,
read this manual and manuals of relevant products fully to acquire proficiency in
handling and operating the product. Make sure to learn all the product information,
safety information, and precautions.
Store this manual in a safe place so that it can be read whenever necessary.
Always forward it to the end user.
Registration:
The company names, system names and product names mentioned in this
manual are either registered trademarks or trademarks of their respective
companies. In some cases, trademark symbols such as '' or '
in this manual.
Effective October 2019
Specifications are subject to change without notice.
Safety Precautions
This manual classifies the safety precautions into two categories:
Depending on the circumstances, procedures indicated by may also
cause severe injury.
It is important to follow all precautions for personal safety.
and .
STARTUP AND
MAINTENANCE
PRECAUTIONS
Do not disassemble or modify the PLC.
Doing so may cause fire, equipment failures, or malfunctions.
For repair, contact your local Mitsubishi Electric representative.
Do not drop the product or exert strong impact to it.
Doing so may cause damage.
DISPOSAL PRECAUTIONS
Please contact a certified electronic waste disposal company for the
environmentally safe recycling and disposal of your device.
TRANSPORTATION
PRECAUTIONS
The product is a precision instrument. During transportation, avoid impacts
larger than those specified in the general specifications by using dedicated
packaging boxes and shock-absorbing palettes.
Failure to do so may cause failures in the product. After transportation, verify
operation of the product and check for damage of the mounting part, etc.
2016 MITSUBISHI ELECTRIC CORPORATION
(Read these precautions before use.)
Indicates that incorrect handling may cause hazardous
conditions, resulting in death or severe injury.
Indicates that incorrect handling may cause hazardous
conditions, resulting i n minor or moderate injury or
property damage.
' are not specified
Associated Manuals
Manual name Manual No. Description
MELSEC iQ-F
FX5-CNV-BC
Hardware Manual
MELSEC iQ-F FX5UJ
User's Manual (Hardware)
MELSEC iQ-F FX5U
User's Manual (Hardware)
MELSEC iQ-F FX5UC
User's Manual (Hardware)
How to obtain manuals
For the necessary product manuals or documents, consult with your local Mitsubishi
Electric representative.
Applicable standards
FX5-30EC, FX5-65EC comply with the EC Directive (EMC Directive).
Further information can be found in the following manual.
Regarding the standards that relate to the CPU module, please refer to either the
product catalog or consult with your local Mitsubishi Electric representative.
Attention
This product is designed for use in industrial applications.
1. Outline
The FX5-30EC and FX5-65EC are extended extension cables used to connect an
extension module located distantly or on a second stage.
1.1 Incorporated Items
Check that the following product and items are included in the package:
Product
Included items Hardware manual (This manual)
JY997D65401
SH-082206ENG
JY997D55301
JY997D61401
MELSEC iQ-F FX5UJ User's Manual (Hardware)
MELSEC iQ-F FX5U User's Manual (Hardware)
MELSEC iQ-F FX5UC User's Manual (Hardware)
FX5-30EC extended extension cable [30 cm]
FX5-65EC extended extension cable [65 cm]
Explains connector conversion
adapter.
Explains FX5UJ CPU module
specification details for I/O, wiring,
installation, and maintenance.
Explains FX5U CPU module
specification details for I/O, wiring,
installation, and maintenance.
Explains FX5UC CPU module
specification details for I/O, wiring,
installation, and maintenance.
2. Installation
INSTALLATION
PRECAUTIONS
Make sure to cut off all phases of the power supply externally before attempting
installation or wiring work.
Failure to do so may cause electric shock or damage to the product.
Use the product within the generic environment specifications described in the
User's Manual (Hardware) of the CPU module used.
Never use the product in areas with excessive dust, oily smoke, conductive dusts,
corrosive gas (salt air, Cl
impacts, or expose it to high temperature, condensation, or rain and wind.
If the product is used in such conditions, electric shock, fire, malfunctions,
deterioration or damage may occur.
INSTALLATION
PRECAUTIONS
Do not touch the conductive parts of the product directly.
Doing so may cause device failures or malfunctions.
When drilling screw holes or wiring, make sure that cutting and wiring debris do
not enter the ventilation slits of the PLC.
Failure to do so may cause fire, equipment failures or malfunctions.
Work carefully when using a screwdriver such as installation of the product.
Failure to do so may cause damage to the product or accidents.
Connect the extended extension cable, peripheral device cables, input/output
cables and battery connecting cable securely to their designated connectors.
Loose connections may cause malfunctions.
Turn off the power to the PLC before attaching or detaching the following devices.
Failure to do so may cause equipment failures or malfunctions.
- Peripheral d evices, expansion board, expansion adapter, and connector
conversion adapter
- Extens ion modules, bus conversion module, and connector conversion module
2.1 Cable configurations
For powered input/output module and extension power supply module (extension
cable type)
CPU module,
Extension module
(Extension cable type)
For input/output module (extension cable type) and intelligent function module
The FX5-CNV-BC is required when conne cting an extended extension cable to an
input/output module (extension cable type) or intelligent function module.
CPU module,
Extension module
(Extension cable type)
For the installation, refer to the following manual.
Caution
Only one extended extension cable can be used for one system.
CPU module,
Extension module Extension module
When using the FX5-CNV-BC a half twist will appear in the cable.
Wire the extension cable for extension with a distance of not less than 50 mm from
the output wiring of the PLC and a noise source including the other driving power
supply.
2, H2S, SO2 or NO2 ), flammable gas, vibration or
Powered input/output module,
Extension power supply module
(extension cable type)
Extended extension cable
Input module/Output module
(extension cable type),
FX5-CNV-BC
Extended
extension cable
MELSEC iQ-F FX5UJ User's Manual (Hardware)
MELSEC iQ-F FX5U User's Manual (Hardware)
MELSEC iQ-F FX5UC User's Manual (Hardware)
Extended
extension cable
Intelligent function module
Extended
extension cable
The extension module should not be connected through the right hand
expansion port as shown in the following figure.
CPU module,
Extension module Extension module
This manual confers no industrial property rights or any rights of any other kind,
nor does it confer any patent licenses. Mitsubishi Electric Corporation cannot be
held responsible for any problems involving industrial property rights which may
occur as a result of using the contents noted in this manual.
Warranty
Exclusion of loss in opportunity and secondary loss from warranty liability
Regardless of the grat is warranty term, Mitsubishi shall not be liable for compensat ion to:
(1) Damages caused by any cause found not to be the responsibility of Mitsubishi.
(2)
Loss in opport unity, lost profits incurred t o the user by Failures o f Mitsubishi products.
(3)
Special damages and secondary damages w hether foreseeable or not, compensation for
accidents, and compensation for damages to products other than Mitsubishi products.
(4) Replacement by the user, maintenance of on-site equipment, start-up test run
and other tasks.
For safe use
This product has been manufactured as a general-purpose part for general
industries, and has not been designed or manufactured to be incorporated in
a device or system used in purposes related to human life.
Before using the product for special purposes such as nuclear power, electric
power, aerospace, medicine or passenger movement vehicles, consult with
Mitsubishi Electric.
This product has been manufactured under strict quality control. However
when installing the product where major accidents or losses could occur if the
product fails, install appropriate backup or failsafe functions in the system.
HEAD OFFICE : TOKYO BUILDING, 2-7-3 MARUNOUCHI, CHIYODA-KU, TOKYO 100-8310, JAPAN
Loading...