Mitsubishi Electronics CP9550DW1 User Manual

PRINTER DRIVER GUIDE

(CPD9550M Ver. 2.00)

Macintosh, Apple, and Mac OS are trademarks of Apple Computer, Inc.
Adobe, Adobe Photoshop are registered trademarks of Adobe Systems.
The various software packages mentioned in this manual are the registered trademarks of their respective
companies.

Refer to the following web site to check the latest version of the printer driver.
http://www.MitsubishiElectric.co.jp/vcp

System requirements

Computer :PowerMacintosh G4, G5, PowerBookG4, iMac
Main storage memory :128 Mbytes or more
Hard disk :Empty capacity 256 Mbytes or more
Operating system :10.3.9 or later *
USB cable :Be sure to use a cable 2m or under.

*1 CP9550DW supports the USB 2.0 (Hi-Speed USB) interface.

As USB 2.0 is completely upwardly compatible with USB 1.1, CP9550DW can be connected with a
personal computer on which USB1.1 interface is available.
When you use CP9550DW with USB 2.0 (Hi-Speed USB), the personal computer has to support USB

2.0 (Hi-Speed USB).
For the compatibility of the personal computer with USB 2.0 (Hi-Speed USB), ask the manufacturer of
the personal computer.

*2 This printer driver version 2.00 or later supports UniversalBinary.

This printer driver is operable either on Intel-based MacOSX or PowerPC-based MacOSX.

2

Installation

Administrator authority is required to install this printer driver.
When the printer driver of older version has been installed, uninstall it before installing this driver.

1) Start your Macintosh.

2) Double-click on “MITSUBISHI CP9550D.pkg” of the MacOSX folder.

3) Click “Continue” button in the “Install MITSUBISHI CP9550D”. (Fig.1)

4) Read the Software License Agreement and click “Continue” button. (Fig.2)

<Fig.1> <Fig.2>

1

MITSUBISHI Digital Color Printer CP9550DW

5) When you agree with the terms and conditions of the Agreement, click “Agree”. (Fig.3)

6) Select the destination of the driver and click “Continue” button. (Fig.4)

<Fig. 3> <Fig. 4>

7) Click “Install” button.(Fig.5)

8) Enter a name and password, and click “OK” button. (Fig.6)

<Fig. 5> <Fig. 6>

9) Click “Continue Installation”. (Fig.7)

10)Click “Restart” to restart the personal computer. (Fig.8)

<Fig. 7> <Fig. 8>

2

MITSUBISHI Digital Color Printer CP9550DW

11) Turn on the printer and connect it with the personal computer.

12) Double-click “Printer Setup Utility” of “Utilities” folder in the ”Applications” folder. (Fig. 9)

13) The CP9550D is automatically added to “Printer List”. (Fig. 10)

<Fig.9> <Fig.10>

Uninstallation

Operate the following procedures to uninstall the printer driver.

1) Start “Terminal”.

2) When you do not have administrator authority, obtain it by “su” command.

3) Go to the directory where the uninstallations script is stored and execute the script (Rem9550.sh).
./Rem9550.sh

4) When a password is required, enter the password for the administrator.

5) When uninstallation is completed successfully, the following message is displayed.
Uninstallation was completed.
Is a computer rebooted? (Y/N):

6) Enter “Y” or “y” to reboot the computer.
If the computer is not rebooted automatically, exit the ongoing applications and reboot the computer
manually.

3

MITSUBISHI Digital Color Printer CP9550DW