Page 1
Combi oven
Convotherm mini Standard
OES mini 6.06, 6.10, 10.10
Operating instructions - Original, ENG
Advancing Your Ambitions
Page 2
Page 3
Table of Contents
Table of Contents
1 General information 5
1.1 About these operating instructions 5
1.2 Essential reading relating to safety 6
2 Layout of the operating panel 7
2.1 How the control panel works 7
2.2 Layout of the operating panel 8
2.3 The controls 9
2.4 The Functions menu 11
2.5 The Cookbook menu 14
2.6 The Write/Edit menu 15
3 Entering the cooking data 16
3.1 Basic procedure for entering cooking data 16
3.2 Entering a cooking program 17
3.3 Entering the regenerating program 18
3.4 Entering a multi-step program 19
3.5 Setting the start-time preset 20
4 Selecting extra functions and special programs 22
4.1 Basic procedure for selecting extra functions and special programs 22
4.2 Selecting Crisp&Tasty (moisture removal) 23
4.3 Selecting the preheat option 24
4.4 Setting Delta-T cooking 25
4.5 Entering Cook&Hold 26
4.6 Including a beep signal in a cooking program 27
4.7 Setting overnight cooking 28
4.8 Applying the keypad lock 29
5 Entering functions while programs are running. 32
5.1 Retrieving cooking parameters while the program is running 32
5.2 Changing cooking parameters while the program is running 33
5.3 Cancelling programs before they have finished 33
5.4 Manual steaming during cooking 34
5.5 Using spare shelves during cooking 35
5.6 Using spare shelves during regenerating 36
6 Working with the cookbook 37
6.1 Retrieving a cooking profile from the cookbook 37
6.2 Creating a cooking profile 38
6.3 Recording a cooking program 40
6.4 Transferring a cooking profile to the cookbook 42
6.5 Editing, deleting and copying cooking profiles 43
6.6 Inserting, appending and deleting cooking steps 45
6.7 Working with Press&Go 48
7 Cleaning 50
7.1 Select the cleaning program for semi-automatic oven cleaning 50
7.2 Select the cleaning program for fully automatic oven cleaning 50
User manual 3
Page 4
Table of Contents
8 Adjusting the default settings 51
8.1 Accessing the default settings 51
8.2 Setting the beep signal 52
8.3 Adjusting the volume 52
8.4 Setting the time 53
8.5 Setting the date 54
8.6 Sorting alphabetically or numerically 55
8.7 Changing the Expert default values and selecting to use last-used values 56
8.8 Select temperature display 58
8.9 Configuring the network address 59
8.10 Saving / loading the cookbook 60
8.11 Setting the language 61
User manual 4
Page 5
1 General information
1 General information
1.1 About these operating instructions
Purpose
These operating instructions are intended to provide everyone who uses the combi oven with an over‐
view of the operating panel and how to use it, and to enable them to perform essential tasks using the
software.
Contents of customer documentation
Book type Contents
Installation manual
User manual
Operating instructions
■
Describes how to move, set up and install the appliance, and how to
put the appliance into service
■
Describes the hazards and appropriate preventive measures relevant
to all installation tasks
■
Contains the technical data
■
Describes the working procedures and operating steps for cooking and
cleaning
■
Contains the servicing schedule and information on troubleshooting
■
Describes the hazards and appropriate preventive measures relevant
to operation
■
Describes the appliance user interface
■
Contains instructions on how to use the user interface
Who should read this manual
Name of target group Tasks
Chef Essentially performs organizational tasks such as
■
Entering the cooking data
■
Editing existing cooking profiles in the
■
Developing new cooking profiles
■
Adjusting appliance settings
May also perform all user tasks if applicable.
User Essentially performs specific operating tasks such as
■
Selecting a cooking profile
■
Starting a cooking profile
■
Selecting a cleaning program
Notation for decimal points
A decimal point is always used in order to achieve international standardization.
cookbook
User manual 5
Page 6
1 General information
1.2 Essential reading relating to safety
Safety information in the customer documentation
Safety information relating to the combi oven appears only in the installation manual and the user
manual.
The installation manual contains the safety information for the tasks covered by the manual and which
are performed when moving, setting up and installing the appliance and when putting the appliance
into service and removing the appliance from service.
The user manual contains the safety information for the tasks covered by the manual and which are
performed during cooking, cleaning and servicing work.
The safety information contained in the user manual and installation manual must always be consid‐
ered to be part of the operating instructions. The safety information contained in the user manual and
installation manual must always be observed when performing tasks that go beyond merely operating
the software.
Parts of the customer documentation that must be read without fail
The contents of these operating instructions are confined to describing how to operate the user inter‐
face. Each set of instructions always ends with starting a process such as cooking or cleaning, for
which warning notices must be heeded. The instructions for performing the actual process are given in
the installation manual or the user manual.
To guarantee safety, all people who work with the combi oven must have read and understood the
following parts of the customer documentation before starting any work:
■
depending on the activity to be performed, the chapter 'For your safety' in the installation manual or
in the user manual
■
the sections in the installation manual or in the user manual that describe the activity to be carried
out
If you do not follow the safety information in the installation manual and the user manual, you risk po‐
tentially fatal injury and property damage.
User manual 6
Page 7
2 Layout of the operating panel
2 Layout of the operating panel
2.1 How the control panel works
Principle of operation
Your combi oven is operated using a membrane keypad. This means that all the combi oven functions
can be selected either directly using a button on the membrane keypad or via icons presented in the
control-panel display.
After selecting a function, the user is guided through processes by means of function indicators. The
user may still make changes to the workflow if required.
The progress of a process is indicated on the display by a time indication and/or temperature data.
The end of a process is signalled by corresponding function indicators and a signal tone.
Software startup
After you switch on your combi oven at the user interface, the appliance runs a self-test. Once the
software is ready for operation, the cooking temperature and cooking time appear on the display.
The following operating modes are available:
■
Custom cooking
■
Press&Go via quick-select buttons
■
Cookbook
■
Cleaning
What do I need in order to cook?
In order to cook with your combi oven you need a suitable cooking profile for your product. A new
cooking profile can be entered using the main selection. Alternatively, you can select and run a suita‐
ble cooking profile via the '
Cookbook' menu, which contains ready-to-use cooking profiles.
Before starting a cooking operation, you must always be familiar with the rules and hazard warnings in
the user manual that relate to working safely with the appliance, and you must follow the instructions
given there.
User manual 7
Page 8
2 Layout of the operating panel
2.2 Layout of the operating panel
Layout of the operating panel
The following diagram shows the layout of the operating panel:
Functions in the operating panel
The operating panel contains the following functions:
No. Name Function
ON/OFF switch Switches the combi oven on and off
1
Function indicators The indicator lights up when the function is selected
2
Display In normal operating mode:
3
Displays date, time, oven temperature, oven time etc.
In programming mode:
Displays
■
Plain text, storage location number etc.
■
icons of extra functions, special programs and default
settings
Expert choice
4
Tilt selector switch
5
Press&Go buttons
6
Data input
7
Main selection Selects the main cooking program or regenerating pro‐
8
■
Retrieval of the saved cooking profiles
■
For opening the selection submenu
■
For creating/saving a cooking profile
■
For setting the temperature, time etc.
■
For selecting icons of extra functions, special pro‐
grams and default settings
■
For selecting program names, program numbers and
cooking profiles
■
Selects and displays the quick selection
■
The supplied cooking profile labels can be fixed to
these buttons
■
Program start/stop
■
Scrolling in programming mode
■
Selecting the temperature, time etc.
gram
User manual 8
Page 9
2 Layout of the operating panel
2.3 The controls
The 'main selection' buttons
The 'main selection' buttons have the following meanings and functions:
Button Meaning Function
Steam Selects the Steam cooking program
Combi-steam Selects the combi-steam cooking program
Convection Selects the Convection cooking program
Regenerating Selects the Regenerating program
The 'expert choice' buttons
The 'expert choice' buttons have the following meanings and functions:
Button Meaning Function
Cookbook menu
■
Opens the list of saved cooking profiles
■
Opens the Cookbook menu
Functions menu Opens the Functions menu. Selection of
■
Extra functions
■
Special programs
■
Default settings
Write/Edit menu
■
Opens the Write/Edit menu
■
Confirms entries in the Cookbook menu
The 'data input' buttons
The 'data input' buttons have the following meanings and functions:
Button Meaning Function
Start / Stop
Cooking temperature
■
Starts the stops the cooking program
■
Starts the cooking profiles from the cookbook
■
Closes the Functions menu
■
Opens the menu for setting the temperature
■
Displays the actual and target cooking tempera‐
ture
Cooking time
Core temperature
■
Opens the menu for setting the cooking time
■
Displays the cooking time
■
Opens the menu for setting the core temperature
■
Displays the core temperature
Scroll left Goes back one step in programming mode
Scroll right Goes forward one step in programming mode
Tilt selector switch
User manual 9
■
Adjusts the oven temperature, cooking time and
core temperature
■
Selects the program name, program number and
cooking profiles
■
Selects the extra functions and editing functions
Page 10
2 Layout of the operating panel
The operating indicators and function indicators
The following table shows you the various operating indicators and function indicators.
These are illuminated when the relevant function is active.
Indicator Meaning Function
Reduced power No function
Heat required The burner or electric heater is running
Lower fan speed The fan is running at reduced speed
Cooking The appliance is running
Keypad lock The keypad lock is enabled.
■
Illuminated as soon as one key is locked
■
Flickers when a locked key is pressed
Crisp&Tasty Moisture removal is enabled
Program lock No function
User manual 10
Page 11
2 Layout of the operating panel
2.4 The Functions menu
How to access the 'Functions menu'
The icons in the Functions menu are shown in the display. The Functions menu can be opened using
the following button:
The icons in the 'Functions menu'
The icons in the Functions menu have the following meanings and run the following functions:
Icon Meaning Function/program
Crisp&Tasty Removes moisture from the cooking chamber
Preheating Program for preheating the cooking chamber
Delta-T cooking
■
Cooking program in which the oven temperature
increases according to the core temperature
■
Not possible in conjunction with the combi-steam
cooking program
Semi-automatic cleaning Starts semi-automatic cleaning
ConvoClean system Starts fully automatic cleaning
Overnight cooking Opens the 'Overnight Cooking' submenu
Lower fan speed Reduces the air-flow speed inside the cooking
chamber
Beep signal
■
Outputs an audible signal to remind the operator to
perform a required action
■
Can only be included in cooking profiles
Keypad lock Blocks use of buttons in the control panel
Vapour reducer
■
Reduces the amount of vapour produced around
the appliance
■
Can only be selected during cooking mode. Can‐
not be included in a cooking profile
TrayTimer (additional timer)
Manual steaming
■
Sets a specific cooking time for each shelf
■
Can only be selected during cooking operation
■
Adds moisture manually during cooking
■
Can only be selected during cooking using con‐
vection or combi-steam. Cannot be included in a
cooking profile
Cook&Hold
■
2-stage program that adds a finishing (holding)
phase to the cooking phase
■
Can only be included in cooking profiles
Default settings Opens the 'Default Settings' submenu
User manual 11
Page 12
2 Layout of the operating panel
The 'Crisp&Tasty' submenu
The icons in the 'Crisp&Tasty' submenu have the following meanings and functions:
Icon Meaning Function
Low moisture removal Crisp&Tasty level; specifying the amount of excess
moisture removed from the cooking chamber.
Medium moisture removal
Intensive moisture removal
The 'Cleaning' submenu
The references used in the 'Cleaning' submenu have the following meanings and functions:
Name Meaning Function
CareStep:
Interim cleaning
Not possible in conjunction with the Steam cooking
program.
Starts fully automatic cleaning using ConvoCare
rinse aid.
1
2
3
4
The 'Overnight cooking' submenu
The icons in the 'Overnight cooking' submenu have the following meanings and functions:
Icon Meaning Function
The 'Default settings' submenu
Cleaning level 1:
Light soiling
Cleaning level 2:
Moderate soiling
Cleaning level 3:
Heavy soiling
Cleaning level 4:
Heavy soiling with Shine+
Medium Multi-step slow program for preserving the quality
Well done
Cooking
Starts fully automatic cleaning
Starts fully automatic cleaning
Starts fully automatic cleaning
Starts fully automatic cleaning
when roasting large joints
The icons in the 'Default settings' submenu have the following meanings and functions:
Icon Meaning Function
Beep signal Selects the beep signal
Volume Sets the volume
Time Sets the time
User manual 12
Page 13
2 Layout of the operating panel
Icon Meaning Function
Date Sets the date
Sorts the cookbook Selects the cooking profile sorting option for the
Expert default values or lastused values
Temperature display Selects °C or °F
Network address Sets the network address
Saving the cookbook Saves your cookbook on an ID module (IDM)
Loading the cookbook Loads your cookbook from an ID module (IDM)
Language Sets the language of the user interface
cookbook:
■
Alphabetical
■
Numerical based on the memory-location number
Selects Expert default values or last-used values
User manual 13
Page 14
2 Layout of the operating panel
2.5 The Cookbook menu
How to access the 'Cookbook' menu!
The icons in the 'Cookbook' menu are shown in the display. The 'Cookbook' menu can be opened us‐
ing the following buttons:
The 'Cookbook' icons
The icons in the Cookbook menu have the following meanings and functions:
Icon Meaning Function
New cooking profile Creates a new cooking profile
Modify cooking profile Opens the submenu for editing a cooking profile
Delete the cooking profile Deletes a cooking profile
Copy cooking profile Copies a cooking profile
The 'Edit a cooking profile' submenu
The 'Edit a cooking profile' submenu can be opened using the following buttons:
The icons in the 'Edit a cooking profile' submenu have the following meanings and functions:
Icon Meaning Function
Insert step Inserts a new cooking profile step
Append step Appends an extra cooking profile step
Delete step Deletes a cooking profile step
User manual 14
Page 15
2 Layout of the operating panel
2.6 The Write/Edit menu
How to access the 'Write/Edit' menu
The icons in the Write/Edit menu are shown in the display. The Write/Edit menu can be opened using
the following button:
The 'Write/Edit' icons
The icons in the 'Write/Edit' menu have the following meanings and functions:
Icon Meaning Function
New cooking profile Creates a new cooking profile
Recording Records changes in cooking program, temperature
and time in up to 20 cooking steps
Transfer Transfers the last cooking profile you created or re‐
corded to the cookbook
User manual 15
Page 16
3 Entering the cooking data
3 Entering the cooking data
3.1 Basic procedure for entering cooking data
Basic procedure for entering cooking data
To enter your cooking temperature, cooking time or core temperature, follow the steps below:
Step Action Button
1
2
Press the 'Cooking temperature', 'Cooking time' or 'Core
temperature' button.
Result:
The display shows the values to be set.
Use the tilt selector switch to set the desired value.
Result:
■
Your value is entered.
■
You do not need to confirm the value you have entered.
or or
User manual 16
Page 17
3 Entering the cooking data
3.2 Entering a cooking program
Entering a cooking program
To enter a cooking program, follow the steps below:
Step Action Button
1
2
Select a main cooking program.
Enter the cooking temperature.
3
4
Define the switch-off criteria:
■
Cooking time or
■
Core temperature
Press the 'Functions menu' button to select an extra func‐
or
tion or a special cooking program.
5
Select one of the following extra functions if required:
■
Crisp
&Tasty
■
Lower fan speed
■
Vapour reducer
■
Delta-T cooking
■
Overnight cooking
Result:
You have now finished entering your cooking program,
which is held in the temporary memory.
Saving a cooking program
When entering a cooking program, the program is saved in a temporary memory. Whenever a new
program is entered, it overwrites this temporary memory and wipes the original cooking program.
If you wish to use a cooking program again later, you can transfer it to the cookbook as a cooking pro‐
file.
Starting a cooking program
Do not start the cooking program until you have acquainted yourself with the hazards and safety pre‐
cautions and also with the tasks and instructions in the user manual.
User manual 17
Page 18
3 Entering the cooking data
3.3 Entering the regenerating program
Entering the regenerating program
To enter your regenerating program, follow the steps below:
Step Action Button
1
Select a regenerating program.
2
3
4
Enter the regenerating temperature.
Define the switch-off criteria:
■
Cooking time or
■
Core temperature
Press the 'Functions menu' button to select an extra func‐
or
tion.
5
Select one of the following extra functions if required:
■
Lower fan speed
■
Vapour reducer
Result:
You have now finished entering your regenerating pro‐
gram, which is held in the temporary memory.
Saving a regenerating program
When entering a regenerating program, the program is saved in a temporary memory. Whenever a
new program is entered, it overwrites this temporary memory and wipes the original regenerating pro‐
gram.
If you wish to use a regeneration program again later, you can transfer it to the cookbook as a cooking
profile.
Starting a regenerating program
Do not start the regenerating program until you have acquainted yourself with the hazards and safety
precautions and also with the tasks and instructions in the user manual.
User manual 18
Page 19
3 Entering the cooking data
3.4 Entering a multi-step program
Entering a multi-step cooking or regenerating program
To create a multi-step cooking program, follow the steps below:
Step Action Button
1
2
3
4
5
Press and hold the required cooking program or regener‐
ating program for 3 seconds.
Result:
The display shows the following items:
■
Top: 01/01 for the first cooking step
■
Bottom: the time and temperature values
Enter the cooking step. To do this, follow the instructions
for entering a cooking program.
Result:
Once you have entered the cooking data, including any
extra functions you may require, you have finished enter‐
ing step 1 of your cooking program.
Press and hold the required cooking program or regener‐
ating program for 3 seconds.
Result:
The display shows the following items:
■
Top: 02/02 for the second cooking step
■
Bottom: the time and temperature values
Enter the cooking step.
In this cooking step you can select the Cook&Hold pro‐
gram if you wish.
Result:
Once you have entered the extra functions, you have fin‐
ished entering step 2 of your cooking program.
Enter further cooking steps by repeating steps 3 and 4.
You can enter up to 20 cooking steps.
Result:
You have now finished entering your multi-step cooking
program, which is held in the temporary memory.
Saving a cooking program
When entering a cooking program, the program is saved in a temporary memory. Whenever a new
program is entered, it overwrites this temporary memory and wipes the original cooking program.
If you wish to use a cooking program again later, you can transfer it to the cookbook as a cooking pro‐
file.
Starting a cooking program
Do not start the cooking program until you have acquainted yourself with the hazards and safety pre‐
cautions and also with the tasks and instructions in the user manual.
More on this ...
How to do it
Entering a cooking program 17
Entering Cook&Hold 26
Including a beep signal in a cooking program 27
User manual 19
Page 20
3 Entering the cooking data
3.5 Setting the start-time preset
Purpose
The start-time preset starts the combi oven automatically after a set delay.
Time settings for the start-time preset
The illustration below shows the adjustable time settings in the display:
The time settings have the following meanings:
Position Meaning When value is displayed
Above Total cooking time:
01:00 hour
Bottom left The combi oven starts in
48 minutes
Bottom centre Start time:
10:23 am
Bottom right Cooking end time:
11:23 am
Only in cooking-time mode
In cooking-time and core-temperature mode
In cooking-time and core-temperature mode
Only in cooking-time mode
Setting the start-time preset
To enter the start-time preset, follow the steps below:
Step Action Button
1
2
3
4
Exiting the start-time preset mode
Press and hold the 'Cooking time' button while operating
the tilt selector switch.
Result:
The display shows the time settings for the start-time pre‐
set.
Press and hold the 'Cooking time' button while using the
tilt selector switch to move the display cursor to the starttime position.
Release the 'Cooking time' button.
Result:
The combi oven automatically switches to start-time preset
mode.
Press and hold the 'Cooking time' button while using the
tilt selector switch to adjust the start time to the value you
require.
Result:
The set cooking program starts automatically when the
start time is reached.
You can leave start-time preset mode at any time, but the start-time preset will be deleted.
To exit start-time preset mode, follow the steps below:
Step Action Button
1
User manual 20
Press the 'Start/Stop' button.
Page 21
3 Entering the cooking data
Entering the end of cooking time instead of the start time
In cooking-time mode you can enter the end of cooking time instead of the start time.
User manual 21
Page 22
4 Selecting extra functions and special programs
4 Selecting extra functions and special programs
4.1 Basic procedure for selecting extra functions and special programs
Limitations
You need to note the following limitations:
■
Only those extra functions and special programs that are logical to use with the selected cooking
program are available and displayed as icons.
Basic procedure for selecting extra functions and special programs
Follow the steps below to select an extra function or a special program:
Step Action Button
1
2
3
4
Press the 'Functions menu' button.
Result:
The display shows the function icons.
Use the tilt selector switch to choose an extra function or a
special program.
Press the 'Functions menu' button to confirm.
Result:
The Confirm menu appears in the display.
Use the tilt selector switch to choose 'YES'.
5
Press the 'Functions menu' button to confirm.
Result:
The extra function or special program is enabled.
Rules of working
The following rules apply to the use of extra functions:
■
You can enable or disable the extra functions at any time during cooking operation by pressing the
'Functions menu' button.
■
You can combine extra functions in any way.
■
When the cooking program has finished, your combi oven automatically resets the selected extra
function (except for the keypad lock) back to the default setting.
These rules do not apply to the following special programs:
■
Preheating
■
Delta-T cooking
■
Cook&Hold
■
Overnight cooking
Closing the Functions menu
You can exit the Functions menu whenever you wish.
To exit the functions menu, follow the steps below:
Step Action Button
1
Press the 'Start/Stop' button.
YES
User manual 22
Page 23
4 Selecting extra functions and special programs
4.2 Selecting Crisp&Tasty (moisture removal)
Requirements
Check that the following requirements have been met:
■
You have selected one of the 'combi-steam' or 'convection' programs.
■
You are in the Functions menu.
Selecting Crisp&Tasty (moisture removal)
Follow the steps below to work with the Crisp&Tasty function:
Step Action Button
1
2
3
4
5
Use the tilt selector switch to choose the 'Crisp&Tasty'
icon.
Press the 'Functions menu' button to confirm.
Result:
The Confirm menu appears in the display.
Use the tilt selector switch to choose 'YES'.
Press the 'Functions menu' button to confirm.
Result:
A selection menu appears in the display.
Use the tilt selector switch to choose the degree of mois‐
ture removal:
Low, moderate or high
YES
6
More on this ...
How to do it
Basic procedure for selecting extra functions and special programs 22
Press the 'Functions menu' button to confirm.
Result:
■
The Crisp&Tasty extra function is enabled.
■
The function indicator lights up.
User manual 23
Page 24
4 Selecting extra functions and special programs
4.3 Selecting the preheat option
Requirements
Check that the following requirements have been met:
■
You are in the Functions menu.
Selecting the preheat option
Follow the steps below to preheat your combi oven:
Step Action Button
1
2
3
4
Use the tilt selector switch to choose the 'Preheat' icon.
Press the 'Functions menu' button to confirm.
Result:
The Confirm menu appears in the display.
Use the tilt selector switch to choose 'YES'.
Press the 'Functions menu' button to confirm.
YES
Result:
The combi oven starts the preheat program using the fol‐
lowing factory setting:
■
Cooking temperature: 190 °C
■
Cooking time: 10min
The 'Preheat' icon appears in the display.
5
6
Press the 'Cooking temperature' button and set a different
preheat temperature.
Press the 'Cooking time' button and set a different preheat
time.
User manual 24
Page 25
4 Selecting extra functions and special programs
4.4 Setting Delta-T cooking
Requirements
Check that the following requirements have been met:
■
Your combi oven comes with a core temperature probe.
■
You have selected one of the 'Steam' or 'Convection' programs.
■
You are in the Functions menu.
Setting Delta-T cooking
Follow the steps below to specify Delta-T cooking:
Step Action Button
1
2
3
Use the tilt selector switch to choose the 'Delta-T cooking'
icon.
Press the 'Functions menu' button to confirm.
Result:
The Confirm menu appears in the display.
Use the tilt selector switch to choose 'YES'.
4
5
6
7
8
More on this ...
How to do it
Basic procedure for selecting extra functions and special programs 22
YES
Press the 'Functions menu' button to confirm.
Press the 'Cooking temperature' button.
Use the tilt selector switch to set the Delta-temperature
you require.
20 °C
Press the 'Core temperature' button.
Use the tilt selector switch to set the final core temperature
you require.
75 °C
User manual 25
Page 26
4 Selecting extra functions and special programs
4.5 Entering Cook&Hold
Requirements
Check that the following requirements have been met:
■
You have a core temperature probe.
■
You are in the process of entering a multi-step cooking program.
■
You have reached at least at the second cooking step.
■
You have selected one of the 'steaming', 'combi-steam' or 'convection' programs.
■
You are in the Functions menu.
Entering Cook&Hold
Follow the steps below to specify Cook&Hold:
Step Action Button
1
2
3
Use the tilt selector switch to choose the 'Cook&Hold' icon.
Press the 'Functions menu' button to confirm.
Result:
The Confirm menu appears in the display.
Use the tilt selector switch to choose 'YES'.
YES
4
5
6
Press the 'Functions menu' button to confirm.
Press the 'Cooking temperature' button.
Use the tilt selector switch to set the Hold temperature you
require.
65 °C
7
Continue entering the cooking profile or start the cooking
profile.
Final step for saving the Cook&Hold information entered
Depending on where you started from, you will need to use different buttons to complete the input pro‐
cedure and save the Cook&Hold function:
Objective Button
To save the input in the temporary memory
Save the input when creating a cooking profile
More on this ...
How to do it
Basic procedure for selecting extra functions and special programs 22
Entering a multi-step program 19
User manual 26
Page 27
4 Selecting extra functions and special programs
4.6 Including a beep signal in a cooking program
Purpose
To be reminded to perform an action at the end of a cooking step, such as adding liquid, you can in‐
clude a beep signal in the cooking profile.
After the beep sounds, you can then open the oven door and perform the required action. When you
re-close the appliance door, the cooking profile continues with the next cooking step.
Requirements
Check that the following requirements have been met:
■
You are in the process of entering a multi-step cooking program.
■
You are in the Functions menu.
Including a beep signal in a cooking program
Follow the steps below to include a beep signal:
Step Action Button
1
2
3
Use the tilt selector switch to choose the 'Beep signal'
icon.
Press the 'Functions menu' button to confirm.
Result:
The Confirm menu appears in the display.
Use the tilt selector switch to choose 'YES'.
YES
4
5
Press the 'Functions menu' button to confirm.
Continue entering the cooking program.
Result:
The beep signal sounds for 3 minutes after the end of a
cooking profile step. The cooking profile continues to run
while it sounds.
Final step for saving the extra function of the beep signal
Depending on where you started from, you will need to use different buttons to complete the input pro‐
cedure and save the extra function for the beep signal:
Objective Button
To save the input in the temporary memory
Save the input when creating a cooking profile
More on this ...
How to do it
Basic procedure for selecting extra functions and special programs 22
Entering a multi-step program 19
User manual 27
Page 28
4 Selecting extra functions and special programs
4.7 Setting overnight cooking
Requirements
Check that the following requirements have been met:
■
Your combi oven comes with a core temperature probe.
■
You are in the Functions menu.
Setting overnight cooking
Follow the steps below to specify overnight cooking:
Step Action Button
1
2
3
4
5
Use the tilt selector switch to choose the 'Overnight cook‐
ing' icon.
Press the 'Functions menu' button to confirm.
Result:
The Confirm menu appears in the display.
Use the tilt selector switch to choose 'YES'.
Press the 'Functions menu' button to confirm.
Result:
A selection menu appears in the display.
Use the tilt selector switch to choose the overnight cooking
program:
YES
6
More on this ...
How to do it
Basic procedure for selecting extra functions and special programs 22
Medium, well-done or boil
Press the 'Functions menu' button to confirm.
Result:
The program starts running.
User manual 28
Page 29
4 Selecting extra functions and special programs
4.8 Applying the keypad lock
Purpose
You can block the use of almost all the controls on your combi oven. You can use this lock to prevent
unauthorized people from changing settings on your combi oven.
You need to enter a PIN code to apply the lock.
Limitations
You cannot block use of the following controls:
Control Button
On / Off
Start / Stop
'Next' and 'Back'
Tilt selector switch
Press&Go buttons
Preset PIN code and changing the PIN code
The PIN code 'PIN 001' is preset in the factory. Please contact an authorized customer service engi‐
neer if you wish to change the PIN code.
Requirements
Check that the following requirements have been met:
■
The combi oven is not running.
■
You are in the Functions menu.
Locking
Follow the steps below to lock the buttons on your combi oven:
Step Action Button
1
Use the tilt selector switch to choose the 'Keypad lock'
icon.
2
Press the 'Functions menu' button to confirm.
Result:
The Confirm menu appears in the display.
3
Use the tilt selector switch to choose 'YES'.
4
Press the 'Functions menu' button to confirm.
Result:
'PIN 000' appears in the display.
5
Use the tilt selector switch to choose the PIN code.
User manual 29
YES
001
Page 30
4 Selecting extra functions and special programs
Step Action Button
6
Press the 'Functions menu' button to confirm.
Result:
'all keys unlocked' appears in the display.
7
Press each button to be locked in turn.
Result:
The display shows 'key locked'.
8
Press the 'Start / Stop' button.
Result:
■
The keypad lock is enabled.
■
The function indicator lights up.
Unlocking
Follow the steps below to unlock the buttons on your combi oven:
Step Action Button
1
Use the tilt selector switch to choose the 'Keypad lock'
icon.
2
Press the 'Functions menu' button to confirm.
Result:
The Confirm menu appears in the display.
3
Use the tilt selector switch to choose 'YES'.
4
Press the 'Functions menu' button to confirm.
Result:
'PIN 000' appears in the display.
5
6
Use the tilt selector switch to choose the PIN code.
Press the 'Functions menu' button to confirm.
Result:
■
All buttons are unlocked.
■
The function indicator is no longer illuminated.
7
Press the 'Start/Stop' button to exit the Functions menu.
Entering the PIN code when the Functions menu is locked
Follow the steps below to unlock the buttons on your combi oven:
Step Action Button
1
Switch off your combi oven using the 'On/Off' button.
Result:
The time and date appear in the display.
2
Press the 'Functions menu' button.
Result:
'PIN 000' appears in the display.
3
Use the tilt selector switch to choose the PIN code.
Result:
All buttons are unlocked.
YES
001
001
User manual 30
Page 31
4 Selecting extra functions and special programs
More on this ...
How to do it
Basic procedure for selecting extra functions and special programs 22
User manual 31
Page 32
5 Entering functions while programs are running.
5 Entering functions while programs are running.
5.1 Retrieving cooking parameters while the program is running
Cooking parameters that can be retrieved
You can retrieve the following cooking parameters while the program is running:
■
Actual oven temperature
■
Set cooking time
■
Target core temperature
Requirements
Check that the following requirements have been met:
■
You have selected a cooking program or regenerating program.
■
One of these programs is running.
Retrieving cooking parameters while the program is running
To retrieve cooking parameters while programs are running, follow the steps below:
Step Action Button
1
Press one of the following buttons once or twice:
■
Cooking temperature
■
Cooking time or core temperature
or
User manual 32
Page 33
5 Entering functions while programs are running.
5.2 Changing cooking parameters while the program is running
Requirements
Check that the following requirements have been met:
■
You have selected a cooking program or regenerating program.
■
One of these programs is running.
Changing cooking parameters while the program is running
To change programs, follow the steps below:
Step Action Button
1
Select one of the following buttons for the action you re‐
quire:
■
Cooking temperature
■
Cooking time or core temperature
or
2
Correct the values.
5.3 Cancelling programs before they have finished
Requirements
Check that the following requirements have been met:
■
You have selected a cooking program or regenerating program.
■
One of these programs is running.
Cancelling programs before they have finished
To cancel programs before they have finished, follow the steps below:
Step Action Button
1
Press the 'Start/Stop' button.
User manual 33
Page 34
5 Entering functions while programs are running.
5.4 Manual steaming during cooking
Requirements
Check that the following requirements have been met:
■
You have selected one of the 'combi-steam' or 'convection' programs.
■
One of these cooking programs is running.
■
You are in the Functions menu
Manual steaming during cooking
Follow the steps below to steam the food during cooking:
Step Action Button
1
2
3
Use the tilt selector switch to choose the 'Manual steam‐
ing' icon.
Press the 'Functions menu' button to confirm.
Result:
The Confirm menu appears in the display.
Use the tilt selector switch to choose 'YES'
YES
4
Press the 'Functions menu' button to confirm.
Result:
The food is steamed for 10 seconds.
User manual 34
Page 35
5 Entering functions while programs are running.
5.5 Using spare shelves during cooking
Requirements
Check that the following requirements have been met:
■
You have consulted the user manual to acquaint yourself with the hazards and safety precautions
and also with the tasks and cooking workflows.
■
Apart from the cooking time, the additional food to be cooked needs the same conditions as the
food in the current program that is running.
■
The relevant cooking program is running.
■
You are in the Functions menu.
Using TrayTimer (additional timer) during cooking
Follow the steps below to work with the additional timer:
Step Action Button
1
2
Use the tilt selector switch to choose the 'TrayTimer (addi‐
tional timer)' icon.
Press the 'Functions menu' button to confirm.
Result:
The display shows the specified time and remaining time
for the TrayTimer:
3
Use the 'Next' button to switch to the specified time, and
use the tilt selector switch to adjust the cooking time for
this timer.
Result:
The selected timer starts running as soon as you enter a
time greater than 0:00.
4
5
Press the 'Functions menu' button or the 'Start/Stop' but‐
ton to exit the Timer function.
Caution: Do not load the shelf level until you have ac‐
or
quainted yourself with the hazards and safety precautions
and also with the tasks and instructions in the user man‐
ual.
Result:
As soon as the additional timer has timed out,
'Timer xy' is displayed and a signal sounds.
Please note:
■
Resetting a timer to 0:00 stops the timer function.
■
Please also note that the selected cooking program con‐
tinues to run even after the signal sounds.
User manual 35
Page 36
5 Entering functions while programs are running.
5.6 Using spare shelves during regenerating
Requirements
Check that the following requirements have been met:
■
You have consulted the user manual to acquaint yourself with the hazards and safety precautions
and also with the tasks and cooking workflows.
■
Apart from the regeneration time, the additional food to be regenerated needs the same conditions
as the regeneration food in the current program that is running.
■
The relevant regenerating program is running.
■
You are in the Functions menu.
Using TrayTimer (additional timer) during regenerating
Follow the steps below to work with the additional timer:
Step Action Button
1
2
Use the tilt selector switch to choose the 'TrayTimer (addi‐
tional timer)' icon.
Press the 'Functions menu' button to confirm.
Result:
The display shows the specified time and remaining time
for the TrayTimer:
3
Use the 'Next' button to switch to the specified time, and
use the tilt selector switch to adjust the regeneration time
for this timer.
Result:
The selected timer starts running as soon as you enter a
time greater than 0:00.
4
5
Press the 'Functions menu' button or the 'Start/Stop' but‐
ton to exit the Timer function.
Caution: Do not load the shelf level until you have ac‐
or
quainted yourself with the hazards and safety precautions
and also with the tasks and instructions in the user man‐
ual.
Result:
As soon as the additional timer has timed out,
'Timer xy' is displayed and a signal sounds.
Please note:
■
Resetting a timer to 0:00 stops the timer function.
■
Please also note that the selected regeneration program
continues to run even after the signal sounds.
User manual 36
Page 37
6 Working with the cookbook
6 Working with the cookbook
6.1 Retrieving a cooking profile from the cookbook
Retrieving a cooking profile from the saved cooking profiles
To retrieve a cooking profile from the cooking profiles saved in the cookbook, follow the steps below:
Step Action Button
1
2
Starting a cooking profile
Do not start the cooking profile until you have acquainted yourself with the hazards and safety precau‐
tions and also the tasks and instructions in the User manual.
Press the 'Cookbook menu' button.
Result:
A list of saved cooking profiles appears in the display.
Use the tilt selector switch to choose the cooking profile
you require.
User manual 37
Page 38
6 Working with the cookbook
6.2 Creating a cooking profile
Limitations
You need to note the following limitations:
■
You can save up to 250 cooking profiles in the cookbook.
Creating a cooking profile
To create a cooking profile, follow the steps below:
Step Action Button
1
2
3
4
5
6
Press the 'Write/Edit menu' button.
Result:
The 'Write/Edit menu' appears in the display.
Use the tilt selector switch to choose the 'New cooking
profile' icon.
Result:
The cooking program buttons flash and 01/01 appears in
the display.
Enter the single-step or multi-step cooking program you
require, confirming each new cooking step with the 'Write/
Edit menu' button.
To close the input process for the new cooking program,
press the 'Write/Edit menu' button when the cooking-pro‐
gram buttons are flashing.
Result:
You can now enter the cooking profile name.
Use the tilt selector switch to select the letters, and the
'Next' and 'Back' buttons to switch between the respective
placeholders.
Use the 'Write/Edit menu' button to confirm the finished
cooking profile name.
7
8
Exit the cooking profile
To exit the cooking profile, follow the steps below:
Step Action Button
1
More on this ...
How to do it
Entering a cooking program 17
Basic procedure for selecting extra functions and special programs 22
Use the tilt selector switch to choose a free memory loca‐
tion.
Please note:
You can also select and overwrite a memory location that
is already occupied.
Press the 'Write/Edit menu' button to confirm.
Result:
The cooking profile is saved in the cookbook.
Press the 'Start/Stop' button.
User manual 38
Page 39
6 Working with the cookbook
Next steps
Transferring a cooking profile to the cookbook 42
Editing, deleting and copying cooking profiles 43
Working with Press&Go 48
User manual 39
Page 40
6 Working with the cookbook
6.3 Recording a cooking program
Purpose
When recording a cooking program, you can save any changes made to the cooking program, temper‐
ature and timings in up to 20 cooking steps in the temporary memory. During the recording process,
all the changes you make at the control panel during cooking are recorded, except for manual steam‐
ing and any cooking steps lasting less than one minute. You can press the 'Start/Stop' button during
the cooking workflow without your cooking steps being lost or overwritten.
To permanently save the cooking program you have created, you can transfer it to the cookbook as a
cooking profile when you have finished recording it.
Recording procedure
Recording a cooking program involves 3 steps:
Step Description
1
2
3
Starting the recorder
Start the cooking/regenerating program
Stopping the recorder
Starting the recorder
Follow the steps below to start the recorder:
Step Action Button
1
Press the 'Write/Edit menu' button.
Result:
The 'Write/Edit menu' appears in the display.
2
To start the recording, use the tilt selector switch to
choose the 'Recording' icon.
3
Press the 'Write/Edit menu' button to confirm.
Result:
■
The recorder starts recording until stopped.
■
'Recorder ON' appears in the display
■
The 'Recording' icon appears in the display.
Stopping the recorder
Follow the steps below to stop the recorder:
Step Action Button
1
Press the 'Write/Edit menu' button to stop the recording.
Recorder ON
2
3
Use the tilt selector switch to choose the 'Recording' icon.
Press the 'Write/Edit menu' button to confirm.
Result:
■
Recording is stopped.
■
'Recorder OFF' appears in the display
■
The 'Recording' icon disappears from the display.
User manual 40
Recorder OFF
Page 41
6 Working with the cookbook
More on this ...
Next steps
Transferring a cooking profile to the cookbook 42
User manual 41
Page 42
6 Working with the cookbook
6.4 Transferring a cooking profile to the cookbook
Requirements
Check that the following requirements have been met:
■
You have a cooking program in the temporary memory.
Transferring a cooking program to the cookbook as a cooking profile
Follow the steps below to transfer a cooking program to the cookbook as a cooking profile:
Step Action Button
1
2
3
4
5
Press the 'Write/Edit menu' button.
Result:
The 'Write/Edit menu' appears in the display.
Use the tilt selector switch to choose the 'Transfer' icon.
Press the 'Write/Edit menu' button to confirm.
Result:
You can now enter the cooking profile name.
Use the tilt selector switch to select the letters, and the
'Next' and 'Back' buttons to switch between the respective
placeholders.
Use the 'Write/Edit menu' button to confirm the finished
cooking profile name.
6
7
More on this ...
Next steps
Working with Press&Go 48
Use the tilt selector switch to choose a free memory loca‐
tion.
Please note:
You can also select and overwrite a memory location that
is already occupied.
Press the 'Write/Edit menu' button to confirm the selection.
Result:
The cooking program is saved in the cookbook as a cook‐
ing profile.
119
User manual 42
Page 43
6 Working with the cookbook
6.5 Editing, deleting and copying cooking profiles
Requirements
Check that the following requirements have been met:
■
You have opened a cooking profile from the cookbook.
Modifying a cooking profile
To modify a cooking profile, follow the steps below:
Step Action Button
1
2
3
4
5
6
Press the 'Write/Edit menu' button.
Result:
The 'Cookbook menu' appears in the display.
Use the tilt selector switch to choose the 'Modify cooking
profile' icon.
Press the 'Write/Edit menu' button to confirm.
Result:
The individual cooking steps in the cooking profile are dis‐
played.
Use the 'Next' and 'Back' buttons to select the cooking
step that you wish to change.
Correct the cooking profile or change the cooking data.
Press the 'Write/Edit menu' button to confirm.
Result:
You have edited the cooking profile step.
Deleting a cooking profile
To delete a cooking profile, follow the steps below:
Step Action Button
1
Press the 'Write/Edit menu' button.
Result:
The 'Cookbook menu' appears in the display.
2
Use the tilt selector switch to choose the 'Delete cooking
profile' icon.
3
Press the 'Write/Edit menu' button to confirm.
Result:
■
The cooking profile is deleted.
■
The memory location number of the deleted cooking
profile is once again available.
Copying a cooking profile
To copy a cooking profile, follow the steps below:
Step Action Button
1
Press the 'Write/Edit menu' button.
Result:
The 'Cookbook menu' appears in the display.
2
Use the tilt selector switch to choose the 'Copy cooking
profile' icon.
User manual 43
Page 44
6 Working with the cookbook
Step Action Button
3
4
5
Exit the cooking profile
To exit the cooking profile, follow the steps below:
Step Action Button
1
Press the 'Write/Edit menu' button to confirm.
Result:
The memory locations are displayed.
Use the tilt selector switch to choose a free memory loca‐
tion.
Please note:
You can also select and overwrite a memory location that
is already occupied.
Press the 'Write/Edit menu' button to confirm the selection.
Result:
The cooking profile is copied and saved in the cookbook.
Press the 'Cookbook menu' button
005
User manual 44
Page 45
6 Working with the cookbook
6.6 Inserting, appending and deleting cooking steps
Requirements
Check that the following requirements have been met:
■
You have opened a cooking profile from the cookbook.
■
The cooking profile contains less than 20 cooking steps.
Insert cooking step
To insert a cooking step in a cooking profile, follow the steps below:
Step Action Button
1
2
3
4
5
6
Press the 'Write/Edit menu' button.
Result:
The 'Cookbook menu' appears in the display.
Use the tilt selector switch to choose the 'Modify cooking
profile' icon.
Press the 'Write/Edit menu' button to confirm.
Result:
The individual cooking steps in the cooking profile are dis‐
played.
Use the 'Next' and 'Back' buttons to select the cooking
step in front of which you wish to insert a new cooking
step.
Press the 'Functions menu' button to confirm.
Result:
The submenu for editing a cooking profile appears in the
display.
Use the tilt selector switch to choose the 'Insert step' icon.
7
8
9
Press the 'Functions menu' button to confirm.
Use the tilt selector switch to choose 'YES'.
Press the 'Functions menu' button to confirm.
Result:
■
A new cooking step is inserted at the selected point.
■
All subsequent cooking steps are re-numbered.
■
The new cooking step is highlighted and all cooking pro‐
gram buttons flash.
10
Now enter the cooking data for the new cooking step.
Appending a cooking step
To append a cooking step to a cooking profile, follow the steps below:
Step Action Button
1
Press the 'Write/Edit menu' button.
Result:
The 'Cookbook menu' appears in the display.
2
Use the tilt selector switch to choose the 'Modify cooking
profile' icon.
YES
User manual 45
Page 46
6 Working with the cookbook
Step Action Button
3
Press the 'Write/Edit menu' button to confirm.
Result:
The individual cooking steps in the cooking profile are dis‐
played.
4
Use the 'Next' button to select the final cooking step.
5
Press the 'Functions menu' button to confirm.
Result:
The submenu for editing a cooking profile appears in the
display.
6
Use the tilt selector switch to choose the 'Append step'
icon.
7
8
9
Press the 'Functions menu' button to confirm.
Use the tilt selector switch to choose 'YES'.
Press the 'Functions menu' button to confirm.
Result:
■
A new cooking step is appended to the cooking profile.
■
The new cooking step is highlighted and all cooking pro‐
gram buttons flash.
10
Now enter the cooking data for the new cooking step.
Delete cooking step
To delete a cooking step from a cooking profile, follow the steps below:
Step Action Button
1
Press the 'Write/Edit menu' button.
Result:
The 'Cookbook menu' appears in the display.
2
Use the tilt selector switch to choose the 'Modify cooking
profile' icon.
3
Press the 'Write/Edit menu' button to confirm.
Result:
The individual cooking steps in the cooking profile are dis‐
played.
4
Use the 'Next' and 'Back' buttons to select the cooking
step that you wish to delete.
5
Press the 'Functions menu' button to confirm.
Result:
The submenu for editing a cooking profile appears in the
display.
6
Use the tilt selector switch to choose the 'Delete step' icon.
YES
7
Press the 'Functions menu' button to confirm.
User manual 46
Page 47
6 Working with the cookbook
Step Action Button
8
9
Exit the cooking profile
To exit the cooking profile, follow the steps below:
Step Action Button
1
Use the tilt selector switch to choose 'YES'.
Press the 'Functions menu' button to confirm.
Result:
The cooking step is deleted.
Press the 'Cookbook menu' button
YES
User manual 47
Page 48
6 Working with the cookbook
6.7 Working with Press&Go
Purpose
The combi oven lets you assign the cooking profiles saved in the cookbook and the cleaning program
to Press&Go buttons (icons). You can start the assigned cooking profile or cleaning program at any
time with a single touch of the corresponding Press
Do not start the cooking profile or the cleaning program until you have acquainted yourself with the
hazards and safety precautions and also with the tasks and instructions in the user manual.
Advantages
You enjoy the following benefits:
■
You can assign the cooking profiles saved in the cookbook and the cleaning program to Press
buttons.
■
The Press&Go buttons make your work quick and easy, because you do not need to enter any set‐
tings.
■
The Press&Go buttons are ideal for dishes that you prepare regularly, such as crisping up pretzels,
or heating up rolls and croissants. This means that you achieve top-quality results every time, even
when leaving this job to semi-skilled staff.
■
By locking the operating panel, you can achieve a high level of production reliability when working
with the Press&Go buttons, because your staff cannot change any settings.
■
You can pre-heat the combi oven for meal production quickly and easily by assigning the preheat
program to a Press&Go button.
&Go button.
&Go
Adding the fully automatic cleaning program (ConvoClean system) to the cookbook
Follow the steps below to add the fully automatic cleaning program (ConvoClean system) to the cook‐
book:
Step Action Button
1
Press the 'Write/Edit menu' button.
Result:
The 'Write/Edit menu' appears in the display.
2
Use the tilt selector switch to choose the 'New cooking
profile' icon.
Result:
The cooking program buttons flash and 01/01 appears in
the display.
3
Press the 'Functions menu' button.
Result:
The display shows the function icons.
4
Use the tilt selector switch to choose the 'fully automatic
cleaning' icon.
5
Press the 'Functions menu' button to confirm.
Result:
The Confirm menu appears in the display.
6
Use the tilt selector switch to choose 'YES'.
7
Press the 'Functions menu' button to confirm.
Result:
'Cleaning 01' appears in the display.
User manual 48
YES
Page 49
6 Working with the cookbook
Step Action Button
8
Use the tilt selector switch to choose the cleaning level
you require.
Q = quick clean
1 = light soiling
2 = normal soiling
3 = heavy soiling
4 = heavy soiling with Shine+
9
Press the 'Write/Edit menu' button to confirm.
Result:
You can now enter the cooking profile name.
10
Use the tilt selector switch to select the letters, and the
'Next' and 'Back' buttons to switch between the respective
placeholders.
11
Use the 'Write/Edit menu' button to confirm the finished
cooking profile name.
Q, 1, 2, 3, 4
12
Use the tilt selector switch to choose a free memory loca‐
tion.
Please note:
You can also select and overwrite a memory location that
is already occupied.
13
Press the 'Write/Edit menu' button to confirm.
Result:
Fully automatic cleaning is saved in the cookbook.
Assigning a cooking profile or cleaning program to a Press&Go button
Follow the steps below to assign a cooking profile or a cleaning program to a Press&Go button:
Step Action Button
1
Press the 'Cookbook menu' button.
Result:
A list of saved cooking profiles appears in the display.
2
Use the tilt selector switch to choose the cooking profile or
cleaning program you require.
3
Hold down the required button of the Press&Go keypad
for 3 seconds.
Result:
■
An audible signal is given.
■
The cooking profile or cleaning program is assigned to
the Press&Go button.
User manual 49
Page 50
7 Cleaning
7 Cleaning
7.1 Select the cleaning program for semi-automatic oven cleaning
Selecting the cleaning program
Follow these steps to select the semi-automatic cleaning program:
Step Action Button
1
Select the functions menu:
2
3
4
Use the tilt selector switch to choose the 'Semi-automatic
cleaning' icon.
Press the 'Functions menu' button to confirm.
Caution:
gram immediately. Before you do so, acquaint yourself
with the hazards and safety precautions and also with the
tasks and instructions in the user manual.
Confirming with "YES" starts the cleaning pro‐
7.2 Select the cleaning program for fully automatic oven cleaning
Selecting the cleaning program
Follow these steps to select a fully automatic cleaning program:
Step Action Button
1
2
3
Select the functions menu:
Use the tilt selector switch to choose the 'fully automatic
cleaning' icon.
Press the 'Functions menu' button to confirm.
4
5
User manual 50
Use the tilt selector switch to choose the cleaning level.
Caution:
acquainted yourself with the hazards and safety precau‐
tions and also with the tasks and cleaning procedures in
the user manual.
Do not start the cleaning program until you have
1, 2, 3, 4,
Page 51
8 Adjusting the default settings
8 Adjusting the default settings
8.1 Accessing the default settings
Accessing the default settings
Follow the steps below to access the selection menu for the default settings:
Step Action Button
1
2
3
4
5
Press the 'Functions menu' button.
Result:
The display shows the function icons.
Use the tilt selector switch to choose the 'Default settings'
icon.
Press the 'Functions menu' button to confirm.
Result:
The Confirm menu appears in the display.
Use the tilt selector switch to choose 'YES'.
Press the 'Functions menu' button to confirm.
Result:
The display shows the icons for the default settings.
YES
Closing the Functions menu
To exit the functions menu, follow the steps below:
Step Action Button
1
Press the 'Start/Stop' button.
User manual 51
Page 52
8 Adjusting the default settings
8.2 Setting the beep signal
Requirements
Check that the following requirements have been met:
■
The display shows the icons for the default settings.
Setting the beep signal
Follow the steps below to set the beep signal:
Step Action Button
1
2
3
4
Use the tilt selector switch to choose the 'Beep signal' icon.
Press the 'Functions menu' button to confirm.
Result:
Various options appear in the display.
Use the tilt selector switch to choose the audible signal you
require.
Press the 'Functions menu' button to confirm.
Result:
The beep signal is set.
01-12
8.3 Adjusting the volume
Requirements
Check that the following requirements have been met:
■
The display shows the icons for the default settings.
Adjusting the volume
Follow the steps below to set the volume:
Step Action Button
1
2
3
4
Use the tilt selector switch to choose the 'Volume' icon.
Press the 'Functions menu' button to confirm.
Result:
Various options appear in the display.
Use the tilt selector switch to choose your desired volume
level.
Press the 'Functions menu' button to confirm.
Result:
The volume is set.
1-5
User manual 52
Page 53
8 Adjusting the default settings
8.4 Setting the time
Purpose
If the combi oven is disconnected from the power supply for more than three days, you will need to
reset the correct time.
Requirements
Check that the following requirements have been met:
■
The display shows the icons for the default settings.
Setting the time
Follow the steps below to set the time:
Step Action Button
1
2
3
Use the tilt selector switch to choose the 'Time' icon.
Press the 'Functions menu' button to confirm.
Result:
A selection list of optional time formats appears in the dis‐
play.
Use the tilt selector switch to choose the time format you
require.
15:00
03:00 pm
4
5
6
Use the 'Next' and 'Back' buttons to toggle between hours
and minutes.
Enter the current time using the tilt selector switch. 16:51
04:51 pm
Press the 'Functions menu' button to confirm.
Result:
The current time is saved.
User manual 53
Page 54
8 Adjusting the default settings
8.5 Setting the date
Purpose
If the combi oven is disconnected from the power supply for more than three days, you will need to
reset the correct date.
Requirements
Check that the following requirements have been met:
■
The display shows the icons for the default settings.
Setting the date
Follow the steps below to set the date:
Step Action Button
1
2
3
Use the tilt selector switch to choose the 'Date' icon.
Press the 'Functions menu' button to confirm.
Result:
A selection list of optional date formats appears in the dis‐
play.
Use the tilt selector switch to choose the date format you
require.
20.05.2009
05-20-2009
4
5
6
Use the 'Next' and 'Back' buttons to scroll between day,
month and year.
Enter today's date using the tilt selector switch. 28.05.2009
05-28-2009
Press the 'Functions menu' button to confirm.
Result:
Today's date is saved.
User manual 54
Page 55
8 Adjusting the default settings
8.6 Sorting alphabetically or numerically
Purpose
Cooking profiles can be sorted alphabetically by name or numerically by storage location.
Depending on how many cooking profiles are saved, changing from alphabetical to numerical sorting
or vice versa can take some time.
Requirements
Check that the following requirements have been met:
■
The display shows the icons for the default settings.
Sorting alphabetically
Follow the steps below to sort the cooking profiles in the cookbook alphabetically:
Step Action Button
1
2
3
Use the tilt selector switch to choose the 'Alphabetic cook‐
book' icon.
Press the 'Functions menu' button to confirm.
Result:
The Confirm menu appears in the display.
Use the tilt selector switch to choose 'YES'.
4
Sorting numerically
Follow the steps below to sort the storage locations numerically:
Step Action Button
1
2
3
4
Press the 'Functions menu' button to confirm.
Result:
Alphabetical sorting is set as the sorting method.
Use the tilt selector switch to choose the 'Alphabetic cook‐
book' icon.
Press the 'Functions menu' button to confirm.
Result:
The Confirm menu appears in the display.
Use the tilt selector switch to choose 'NO'.
Press the 'Functions menu' button to confirm.
Result:
Numerical sorting is set as the sorting method.
YES
NO
User manual 55
Page 56
8 Adjusting the default settings
8.7 Changing the Expert default values and selecting to use last-used values
Purpose
You are able to specify whether you wish the Expert default values or the last-used values to appear
in the display for the cooking time and oven temperature when selecting a cooking program.
Factory presets
The following table shows the factory presets for the Expert default values:
Cooking program Cooking temperature Core temperature Cooking time
100 °C 70 °C 25 min
150 °C 70 °C 70 min
170 °C 70 °C 30 min
135 °C 70 °C 5 min
Advantages
You enjoy the following benefits:
■
Using Expert default values helps to cut operating mistakes, especially when you are working with
semi-skilled staff.
Whenever a cooking program is selected, it is backed by the values that you have specified.
■
Last-used values are the ideal option when you regularly cook several batches one after the other.
You can then start the cooking program immediately without needing to select the time and temper‐
ature values.
Requirements
Check that the following requirements have been met:
■
The display shows the icons for the default settings.
Changing Export default values
Follow the steps below to change the Expert default values:
Step Action Button
1
Use the tilt selector switch to choose the 'Expert default
value' icon.
2
Press the 'Functions menu' button to confirm.
Result:
The Confirm menu appears in the display.
3
Use the tilt selector switch to choose 'YES'.
4
Press the 'Functions menu' button to confirm.
Result:
The display shows a selection list containing the Expert
default values that have been set.
5
Use the tilt selector switch to choose the 'Expert default
value' that you wish to modify.
User manual 56
YES
Page 57
8 Adjusting the default settings
Step Action Button
6
7
Use the 'Next' button to scroll to the numerical value.
Use the tilt selector switch to set the desired value.
e. g. the value of the cooking temperature for steaming.
8
9
10
Selecting to use last-used values
Follow the steps below to select to use last-used values:
Step Action Button
1
2
3
4
Scroll back using the 'Back' button in order to save the val‐
ue.
Repeat steps 6 and 7 to edit other Expert default values.
Press the 'Functions menu' button to confirm the settings
you have made.
Result:
The Expert default values are set to new values.
Use the tilt selector switch to choose the 'Expert default
value' icon.
Press the 'Functions menu' button to confirm.
Result:
The Confirm menu appears in the display.
Use the tilt selector switch to choose 'NO'.
Press the 'Functions menu' button to confirm.
Result:
The combi oven now uses the last-used values.
NO
User manual 57
Page 58
8 Adjusting the default settings
8.8 Select temperature display
Purpose
The temperature display can be set in °C or °F.
Limitations
You need to note the following limitations:
■
When the temperature display is changed, there is no change to the data in the cookbook. These
values must be changed manually.
Requirements
Check that the following requirements have been met:
■
The display shows the icons for the default settings.
Setting the temperature display to °C
Follow the steps below to set the temperature display to °C:
Step Action Button
1
2
3
Use the tilt selector switch to choose the 'Temperature in
°C' icon.
Press the 'Functions menu' button to confirm.
Result:
The Confirm menu appears in the display.
Use the tilt selector switch to choose 'YES'.
YES
4
Press the 'Functions menu' button to confirm.
Result:
The temperature display is set to °C.
User manual 58
Page 59
8 Adjusting the default settings
8.9 Configuring the network address
Purpose
The network address is needed in order to use PC-Control, PC-HACCP and Convotherm Service Sys‐
tem.
Requirements
Check that the following requirements have been met:
■
The display shows the icons for the default settings.
■
The network address intended for the appliance must not already by in use by another appliance.
Configuring the network address
Follow the steps below to set the network address:
Step Action Button
1
2
3
4
Use the tilt selector switch to choose the 'Network address'
icon.
Press the 'Functions menu' button to confirm.
Result:
The currently set network address is displayed.
Use the tilt selector switch to choose the desired network
address.
01-120
Press the 'Functions menu' button to confirm.
Result:
The network address is set.
User manual 59
Page 60
8 Adjusting the default settings
8.10 Saving / loading the cookbook
Requirements
Check that the following requirements have been met:
■
The display shows the icons for the default settings.
Saving the cookbook
Follow the steps below to save the cookbook:
Step Action Button
1
2
3
4
Use the tilt selector switch to choose the 'Save cookbook'
icon.
Press the 'Functions menu' button to confirm.
Result:
The Confirm menu appears in the display.
Use the tilt selector switch to choose 'YES'.
Press the 'Functions menu' button to confirm.
Result:
The cookbook has been saved.
YES
Loading the cookbook
Follow the steps below to load the cookbook:
Step Action Button
1
2
3
4
Use the tilt selector switch to choose the 'Load cookbook'
icon.
Press the 'Functions menu' button to confirm.
Result:
The Confirm menu appears in the display.
Use the tilt selector switch to choose 'YES'.
Press the 'Functions menu' button to confirm.
Result:
The cookbook has been loaded.
YES
User manual 60
Page 61
8 Adjusting the default settings
8.11 Setting the language
Requirements
Check that the following requirements have been met:
■
The display shows the icons for the default settings.
Setting the language
Follow the steps below to set the language:
Step Action Button
1
2
3
Use the tilt selector switch to choose the 'Language' icon.
Press the 'Functions menu' button to confirm.
Result:
Various options appear in the display.
Use the tilt selector switch to choose the language you re‐
quire.
4
Press the 'Functions menu' button to confirm.
Result:
The language is set.
User manual 61
Page 62
Page 63
W
ELBIL T DEU TSCHL AND G MBH
TALSTRA SSE 35, 8243 6 EGLFING | GERMANY, T +49(0)8 847 67-0, F +49(0)8 847 414
WW W.CONVOTHERM.COM
Combi oven
Additional technical documentation can be found in the download center at :
www.convotherm.com
Welbilt offers fully-integrated kitchen systems and our products are backed
by KitchenCare aftermarket parts and service. Welbilt’s portfolio of award- ®
winning brands includes Cleveland™, Convotherm®, Crem®, Delfi eld®,
fit-
kitchen
SM
, Frymaster®, Garland®, Kolpak®, Lincoln™,
Merrychef
®
and Multiplex®.
Manitowoc
®
,
Merco
®
,
Convotherm mini Standard
OES mini 6.06, 6.10, 10.10
Serial no.
Item no.
Order no.
© 2022 Welbilt Inc. All rights reserved.
9732825_00 engGBR 06/22
Loading...