mini SE Countryman (2018) Owner's Manual

Download

Page 1

Contents

OWNER'S MANUAL.

MINI COUNTRYMAN PLUG-

IN HYBRID.

A-Z

Online Edition for Part no. 01402983594 - X/17

Page 2

Page 3

MINI

Owner's Manual for the vehicle

Thank you for choosing a MINI.

The more familiar you are with your vehicle, the better control you will have on the road. We therefore strongly suggest:

Read this Owner's Manual before starting off in your new MINI. Also use the Integrated Owner's Manual in your vehicle. It con‐ tains important information on vehicle operation that will help you make full use of the technical features available in your MINI. The manual also contains information designed to en‐ hance operating reliability and road safety, and to contribute to maintaining the value of your MINI.

Any updates made after the editorial deadline can be found in the appendix of the printed Owner's Manual for the vehicle.

Get started now. We wish you driving fun and inspiration with your MINI.

Online Edition for Part no. 01402983594 - X/17

Page 4

© 2017 Bayerische Motoren Werke Aktiengesellschaft Munich, Germany Reprinting, including excerpts, only with the written consent of BMW AG, Munich. US English ID5 X/17, 11 17 490 Printed on environmentally friendly paper, bleached without chlorine, suitable for recycling.

Online Edition for Part no. 01402983594 - X/17

Page 5

Contents

The fastest way to find information on a partic‐ ular topic or item is by using the index, refer to page 284.

The topics of Navigation, Entertainment, and Communication can be called up via the follow‐ ing Owner's Manuals: Integrated Owner's Manual in the vehicle, Online Owner's Manual, MINI Driver's Guide app.

6 Information

AT A GLANCE

16 Cockpit 20 Central Information Display (CID) 29 Voice activation system 32 General settings 43 Owner's Manual media 47 MINI eDRIVE 49 Safety of the hybrid system

CONTROLS

52 Opening and closing 73 Settings 84 Transporting children safely 89 Driving 109 Displays 130 Lights 136 Safety 155 Driving stability control systems 159 Driving comfort 177 Climate control 186 Interior equipment 193 Storage compartments 196 Cargo area

MOBILITY

218 Charging the vehicle 226 Refueling 229 Fuel 231 Wheels and tires 246 Engine compartment 249 Engine oil 253 Coolant 255 Maintenance 257 Replacing components 267 Breakdown assistance 272 Care

REFERENCE

280 Technical data 282 Appendix 284 Everything from A to Z

DRIVING TIPS

206 Things to remember when driving 211 Saving fuel

Online Edition for Part no. 01402983594 - X/17

Page 6

Information

Using this Owner's Manual

Orientation

The fastest way to find information on a partic‐ ular topic is by using the index.

An initial overview of the vehicle is provided in the first chapter.

Updates made after the editorial deadline

Due to updates after the editorial deadline, dif‐ ferences may exist between the printed Own‐ er's Manual and the following Owner's Man‐ uals:

▷ Integrated Owner's Manual in the vehicle.

▷ Online Owner's Manual.

▷ MINI Motorer’s Guide App.

Notes on updates can be found in the appendix of the printed Owner's Manual for the vehicle.

Owner's Manual for Navigation, Entertainment, Communication

The Owner's Manual for Navigation, Entertain‐ ment, and Communication can be obtained as printed book from the service center.

The topics of Navigation, Entertainment, and Communication can be called up via the follow‐ ing Owner's Manuals:

▷ Integrated Owner's Manual in the vehicle.

▷ Online Owner's Manual.

▷ MINI Motorer’s Guide App.

Additional sources of in‐ formation

Dealer’s service center

A dealer’s service center will be glad to answer questions at any time.

Internet

The Owner's Manual and general Information about MINI, for example on technology, are available on the Internet: www.miniusa.com.

Integrated Owner's Manual in the vehicle

The Integrated Owner's Manual specifically de‐ scribes features and functions found in the ve‐ hicle. The Integrated Owner's Manual can be displayed on the Control Display. Additional in‐ formation, refer to page 43.

MINI Motorer’s Guide app

The app specifically describes features and functions found in the vehicle. The app can be displayed on smartphones and tablets. Addi‐ tional information, refer to page 44.

Online Owner's Manual

The Online Owner's Manual specifically de‐ scribes features and functions found in the ve‐ hicle. The Online Owner's Manual can be dis‐ played in any of today's browsers. Additional information, refer to page 45.

Online Edition for Part no. 01402983594 - X/17

Page 7

Symbols and displays

Symbols in the Owner's Manual

Symbol Meaning

Precautions that must be followed. To

avoid the possibility of personal injury and serious damage to the vehicle.

Information

◄ End of a specific item of information.

Measures that can be taken to help

protect the environment.

"..." Control Display texts used to select

individual functions.

›...‹ Verbal instructions to use with the

voice activation system..

››...‹‹ Answers generated by the voice

activation system.

Action steps

Action steps to be carried out are presented as numbered list. The steps must be carried out in the defined order.

First action step.

2. Second action step.

Enumerations

Enumerations without mandatory order or al‐ ternative possibilities are presented as list with bullet points.

▷ First possibility.

▷ Second possibility.

Symbols on vehicle components

Refers to the relevant section of this Owner's Manual for further information on a particular part or assembly.

The symbols on parts of the vehicle indicate that incorrect use of high-voltage equipment or of orange-colored high-voltage components results in the risk of life-threatening injury from electric shock.

Vehicle features and op‐ tions

This Owner's Manual describes all models and all standard, country-specific and optional equipment that is offered in the model series. Therefore, this Owner's Manual also describes and illustrates features and functions that are not available in your vehicle, for example be‐ cause of the selected optional features or the country-specific version.

This also applies to safety-related functions and systems.

When using these functions and systems, the applicable laws and regulations must be ob‐ served.

For any options and equipment not described in this Owner's Manual, refer to the Supple‐ mentary Owner's Manuals.

Your dealer’s service center is happy to answer any questions that you may have about the features and options applicable to your vehicle.

Online Edition for Part no. 01402983594 - X/17

Page 8

Information

Status of the Owner's Manual

Basic information

The manufacturer of your vehicle pursues a policy of constant development that is con‐ ceived to ensure that our vehicles continue to embody the highest quality and safety stan‐ dards. In rare cases, therefore, the features de‐ scribed in this Owner's Manual may differ from those in your vehicle.

Updates made after the editorial deadline

Due to updates after the editorial deadline, dif‐ ferences may exist between the printed Own‐ er's Manual and the following Owner's Man‐ uals:

▷ Integrated Owner's Manual in the vehicle.

▷ Online Owner's Manual.

▷ MINI Motorer’s Guide App.

Notes on updates can be found in the appendix of the printed Owner's Manual for the vehicle.

For Your Own Safety

Manufacturer

The manufacturer of this MINI is Bayerische Motoren Werke Aktionengesellschaft, BMW AG.

Warranty

Your vehicle is technically configured for the operating conditions and registration require‐ ments applying in the country of first delivery, also known as homologation. If your vehicle is to be operated in a different country it might be necessary to adapt your vehicle to poten‐ tially differing operating conditions and regis‐ tration requirements. If your vehicle does not comply with the homologation requirements in a certain country you may not be able to lodge warranty claims for your vehicle there. Further information on warranty is available from a dealer’s service center.

Maintenance and repairs

Advanced technology, e. g. the use of modern materials and high-performance electronics, requires suitable maintenance and repair work.

The manufacturer of your vehicle recommends that you entrust corresponding procedures to a MINI dealer’s service center. If you choose to use another service facility, the manufacturer of your vehicle recommends use of a facility that performs work, for instance maintenance and repair, according to MINI specifications with properly trained personnel, referred to in this Owner's Manual as "another qualified service center or repair shop".

If work is performed improperly, for instance maintenance and repair, there is a risk of sub‐ sequent damage and related safety risks.

Intended use

Follow the following when using the vehicle:

▷ Owner's Manual.

▷ Information on the vehicle. Do not remove

stickers.

▷ Technical vehicle data.

▷ The traffic, speed, and safety laws where

the vehicle is driven.

▷ Vehicle documents and statutory docu‐

ments.

Online Edition for Part no. 01402983594 - X/17

Parts and accessories

The manufacturer of your vehicle recommends the use of parts and accessory products ap‐ proved by the manufacturer of the MINI.

Approved parts and accessories, and advice on their use and installation are available from a MINI dealer's service center.

MINI parts and accessories were tested by the manufacturer of the MINI for their safety and suitability in MINI vehicles.

Page 9

Information

The manufacturer of your vehicle warrants gen‐ uine MINI parts and accessories.

The manufacturer of your vehicle does not evaluate whether each individual product from another manufacturer can be used with MINI vehicles without presenting a safety hazard, even if a country-specific official approval was issued. The manufacturer of your vehicle does not evaluate whether these products are suita‐ ble for MINI vehicles under all usage conditions.

California Proposition 65 Warning

California laws require us to state the following warning:

Engine exhaust and a wide variety of automo‐ bile components and parts, including compo‐ nents found in the interior furnishings in a vehi‐ cle, contain or emit chemicals known to the State of California to cause cancer and birth de‐ fects and reproductive harm. In addition, cer‐ tain fluids contained in vehicles and certain products of component wear contain or emit chemicals known to the State of California to cause cancer and birth defects or other repro‐ ductive harm. Battery posts, terminals and re‐ lated accessories contain lead and lead com‐ pounds. Wash your hands after handling. Used engine oil contains chemicals that have caused cancer in laboratory animals. Always protect your skin by washing thoroughly with soap and water.

Service and warranty

We recommend that you read this publication thoroughly. Your vehicle is covered by the fol‐ lowing warranties:

▷ New Vehicle Limited Warranty.

▷ Rust Perforation Limited Warranty.

▷ Federal Emissions System Defect Warranty.

▷ Federal Emissions Performance Warranty.

▷ California Emission Control System Limited

Warranty.

Detailed information about these warranties is listed in the Service and Warranty Information Booklet for US models or in the Warranty and Service Guide Booklet for Canadian models.

Your vehicle has been specifically adapted and designed to meet the particular operating con‐ ditions and homologation requirements in your country and continental region in order to de‐ liver the full driving pleasure while the vehicle is operated under those conditions. If you wish to operate your vehicle in another country or re‐ gion, you may be required to adapt your vehi‐ cle to meet different prevailing operating con‐ ditions and homologation requirements. You should also be aware of any applicable war‐ ranty limitations or exclusions for such country or region. In such case, please contact Cus‐ tomer Relations for further information.

Maintenance

Maintain the vehicle regularly to sustain the road safety, operational reliability and the New Vehicle Limited Warranty.

Specifications for required maintenance meas‐ ures:

▷ MINI Maintenance system.

▷ Service and Warranty Information Booklet

for US models.

▷ Warranty and Service Guide Booklet for

Canadian models.

If the vehicle is not maintained according to these specifications, this could result in serious damage to the vehicle. Such damage is not covered by the MINI New Vehicle Limited War‐ ranty.

Data memory

General information

Electronic control devices are installed in the vehicle. Some of these are necessary for the ve‐ hicle to function safely or provide assistance during driving, for instance driver assistance

Online Edition for Part no. 01402983594 - X/17

Page 10

Information

systems. Furthermore, control devices facilitate comfort or infotainment functions.

Electronic control devices contain data memo‐ ries, which are able to temporarily or perma‐ nently store information about the condition of the vehicle, component load, maintenance re‐ quirements, technical events or faults.

This information generally records the state of a component, a module, a system or the environ‐ ment, for instance:

▷ Operating states of system components,

e.g., fill levels, tire inflation pressure, bat‐ tery status.

▷ Status messages for the vehicle and its indi‐

vidual components, e.g., wheel rotational speed, wheel speed, deceleration, trans‐ verse acceleration, engaged safety belt in‐ dicator.

▷ Malfunctions and faults in important system

components, for instance lights and brakes.

▷ Information on vehicle-damaging events.

▷ Responses by the vehicle to special situa‐

tions such as airbag deployment or en‐ gagement of the stability control systems.

▷ Ambient conditions, e.g., temperature, rain

sensor signals.

The data is required to perform the control de‐ vice functions. Furthermore, it also serves to recognize and correct malfunctions, and helps the vehicle manufacturer to optimize vehicle functions. The majority of this data is transient and is only processed within the vehicle itself. Only a small proportion of the data is stored in event or fault memories and, if needed, in the vehicle key.

Reading out data

When servicing, for instance during repairs, service processes, warranty cases, and quality assurance measures, this technical information can be read out from the vehicle together with the vehicle identification number. A dealer’s service center or another qualified service cen‐

ter or repair shop can read out the information. The socket for OBD Onboard Diagnosis re‐ quired by law in the vehicle is used to read out the data. The data is collected, processed, and used by the relevant organizations in the serv‐ ice network. The data documents the technical conditions of the vehicle, helps in locating faults and improving quality, and is transferred to the vehicle manufacturer, if needed.

Furthermore, the manufacturer has product monitoring duties to meet in line with product liability law. To fulfill these duties, the vehicle manufacturer needs technical data from the vehicle. Fault and event memories in the vehi‐ cle can be reset when a dealer’s service center or another qualified service center or repair shop performs repair or servicing work.

Data on the scope of servicing work performed and maintenance records are stored in the ve‐ hicle by means of the service history and trans‐ ferred to the vehicle manufacturer. The vehicle owner can contact a dealer's service center to object to the data being stored and transferred to the vehicle manufacturer. This objection ap‐ plies for as long as the vehicle owner remains the proprietor of the vehicle.

Data entry and data transfer into the vehicle

General information

Depending on the vehicle equipment, some data can be transferred into the vehicle when using comfort and infotainment functions, for instance:

▷ Multimedia data such as music, films or

photos for playback in an integrated multi‐ media system.

▷ Address book data for use in conjunction

with an integrated hands-free system or an integrated navigation system.

▷ Entered navigation destinations.

▷ Data on the use of Internet services.

Online Edition for Part no. 01402983594 - X/17

Page 11

Information

This data can be stored locally in the vehicle or is found on a device that has been connected to the vehicle, e.g., a smartphone, USB stick or MP3 player. If this data is stored in the vehicle, it can be deleted at any time. This data is only transmitted to third parties if expressly desired. This depends on the personal settings selected for using online services.

Depending on the vehicle equipment, the fol‐ lowing comfort and individual settings can be stored in the vehicle and modified at any time, for instance:

▷ Settings for the seat and steering wheel po‐

sitions.

▷ Suspension and climate control settings.

▷ Individual settings, for instance lighting in

the car's interior.

Control via mobile devices

Depending on the vehicle equipment, mobile devices connected to the vehicle, for instance smartphones, can be controlled via the vehicle control elements. The sound and picture from the mobile device can be played back and dis‐ played through the multimedia system. Certain information is transferred to the mobile device at the same time. Depending on the type of connection, this includes, for instance position data and other general vehicle information. This optimizes the way in which selected apps, for instance navigation or music playback, work.

There is no further interaction between the mo‐ bile device and the vehicle, for instance active access to vehicle data. How the data will be processed further is determined by the provider of the particular app being used. The extent of the possible settings depends on the respective app and the operating system of the mobile device.

Services

General information

If the vehicle has a wireless network connec‐ tion, this enables data to be exchanged be‐ tween the vehicle and other systems. The wire‐ less network connection is realized via an invehicle transmitter and receiver unit or via personal mobile devices brought into the vehi‐ cle, for instance smartphones. This wireless net‐ work connection enables 'online functions' to be used. These include online services and apps supplied by the vehicle manufacturer or by other providers.

Services from the vehicle manufacturer

Where online services from the vehicle manu‐ facturer are concerned, the corresponding functions are described in the appropriate place, for instance the Owner's Manual or man‐ ufacturer's website. The relevant legal informa‐ tion pertaining to data protection is provided there too. Personal data may be used to per‐ form online services. Data is exchanged over a secure connection, for instance with the IT sys‐ tems of the vehicle manufacturer intended for this purpose. Any collection, processing, and use of personal data above and beyond that needed to provide the services must always be based on a legal permission, contractual ar‐ rangement or consent.

In addition, the vehicle manufacturer evaluates anonymized information on transport infra‐ structure and how the infotainment system is used. This information cannot be traced back to individual vehicles or people. Evaluating the data enables the manufacturer to further im‐ prove its products or services, for instance by incorporating the most up-to-date traffic bulle‐ tins. The data transfer feature can be deacti‐ vated in the vehicle. Certain services and func‐ tions, some of which are subject to a charge, can be deactivated by the driver. It is also pos‐ sible to activate or deactivate the data connec‐ tion as a whole. That is, with the exception of

Online Edition for Part no. 01402983594 - X/17

Page 12

Information

functions and services required by law such as Assist systems.

Services from other providers

When using online services from other provid‐ ers, these services are the responsibility of the relevant provider and subject to their data pri‐ vacy conditions and terms of use. The vehicle manufacturer has no influence on the content exchanged during this process. Information on the way in which personal data is collected and used in relation to services from third parties, the scope of such data, and its purpose, can be obtained from the relevant service provider.

Event Data Recorder EDR

This vehicle is equipped with an event data re‐ corder EDR. The main purpose of an EDR is to record, in certain crash or near crash-like situa‐ tions, such as an air bag deployment or hitting a road obstacle, data that will assist in under‐ standing how a vehicle’s systems performed. The EDR is designed to record data related to vehicle dynamics and safety systems for a short period of time, typically 30 seconds or less.

The EDR in this vehicle is designed to record such data as:

▷ How various systems in your vehicle were

operating.

▷ Whether or not the driver and passenger

safety belts were fastened.

▷ How far, if at all, the driver was depressing

the accelerator and/or brake pedal.

▷ How fast the vehicle was traveling.

This data can help provide a better understand‐ ing of the circumstances in which crashes and injuries occur.

EDR data is recorded by your vehicle only if a nontrivial crash situation occurs; no data is re‐ corded by the EDR under normal driving condi‐ tions and no personal data, for instance name, gender, age, and crash location, are recorded.

However, other parties, such as law enforce‐ ment, could combine the EDR data with the type of personally identifying data routinely ac‐ quired during a crash investigation.

To read data recorded by an EDR, special equipment is required, and access to the vehi‐ cle or the EDR is needed. In addition to the ve‐ hicle manufacturer, other parties, such as law enforcement, that have the special equipment, can read the information if they have access to the vehicle or the EDR.

Vehicle identification number

The vehicle identification number can be found in the engine compartment, on the right-hand side of the vehicle.

The vehicle identification number can be found on the type label, on the right-hand side of the vehicle.

Online Edition for Part no. 01402983594 - X/17

Page 13

The vehicle identification number can also be found behind the windshield.

Reporting safety defects

For US customers

The following only applies to vehicles owned and operated in the US.

If you believe that your vehicle has a defect which could cause a crash or could cause injury or death, you should immediately inform the National Highway Traffic Safety Administration NHTSA, in addition to notifying MINI of North America, LLC, P.O. Box 1227, Westwood, New Jersey 07675-1227, Telephone 1-800-831-1117.

If NHTSA receives similar complaints, it may open an investigation, and if it finds that a safety defect exists in a group of vehicles, it may order a recall and remedy campaign.

However, NHTSA cannot become involved in individual problems between you, your dealer, or MINI of North America, LLC.

To contact NHTSA, you may call the Vehicle Safety Hotline toll-free at 1-888-327-4236 (TTY: 1-800-424-9153); go to http://www.safe‐ rcar.gov; or write to: Administrator, NHTSA, 400 Seventh Street, SW., Washington, DC 20590. You can also obtain other information about motor vehicle safety from http://www.safe‐ rcar.gov

Information

For Canadian customers

Canadian customers who wish to report a safety-related defect to Transport Canada, De‐ fect Investigations and Recalls, may call the toll-free hotline 1-800-333-0510. You can also obtain other information about motor vehicle safety from http://www.tc.gc.ca/roadsafety.

Online Edition for Part no. 01402983594 - X/17

Page 14

WATCH ME.

Online Edition for Part no. 01402983594 - X/17

Page 15

AT A GLANCE

CONTROLS

DRIVING TIPS

MOBILITY

REFERENCE

Online Edition for Part no. 01402983594 - X/17

Page 16

AT A GLANCE

Cockpit

Vehicle features and op‐ tions

This chapter describes all standard, countryspecific and optional features offered with the series. It also describes features that are not

necessarily available in your vehicle, e. g., due to the selected options or country versions. This also applies to safety-related functions and sys‐ tems. When using these functions and systems, the applicable laws and regulations must be observed.

In the vicinity of the steering wheel

1 Power windows 69

2 Exterior mirror operation 81

3 Buttons of the central locking system 57

4 Lights

Front fog lights 133

Light switch 130

Lights off

Daytime running lights 132

Online Edition for Part no. 01402983594 - X/17

Parking lights 130

Low beams 130

Automatic headlight control 131

Cornering light 132

High-beam Assistant 132

Instrument lighting 133

5 Steering wheel buttons, left

Page 17

Cockpit

AT A GLANCE

Camera-based cruise control on/ off 159

Cruise control on/off 165

Cruise control: store speed

Pausing, continuing cruise control

Cruise control: increase speed

Cruise control: reduce speed

Camera-based cruise control: re‐ duce distance

Camera-based cruise control: in‐ crease distance

6 Steering column stalk, left

Turn signal 97

High beams, head‐ light flasher 97

Windshield wipers 101

Rain sensor 102

Cleaning windows 99

Rear window wiper 100

Clean the rear window 100

9 Steering wheel buttons, right

Voice activation 29

Telephone

Confirm the selection 121

Move selection up 121

Move selection down 121

High-beam Assistant 132

Canada: roadside parking light 131

Onboard Computer 121

7 Instrument cluster 109

8 Steering column stalk, right

Online Edition for Part no. 01402983594 - X/17

Increase volume

Reduce volume

10 Horn, entire surface

11 Adjust the steering wheel 83

12 Unlock hood 247

13 Operate the tailgate 60

Page 18

AT A GLANCE

14 Tank vent 226

Cockpit

In the vicinity of the center console

1 Hazard warning system 267

Intelligent Safety 146

2 Control Display 20

3 Radio/Multimedia

4 Glove compartment 193

5 Climate control 177

6 PDC Park Distance Control 167

Rearview camera 170

Parking assistant 173

eDRIVE 92

Online Edition for Part no. 01402983594 - X/17

Starting/stopping the engine, switching drive-ready state modes and the ignition on/ off 89

DSC Dynamic Stability Con‐ trol 155

MINI Driving Modes switch 157

7 Steptronic transmission selector lever 105

8 Controller with buttons 21

9 Parking brake 95

Page 19

In the vicinity of the roofliner

Cockpit

AT A GLANCE

1 Emergency Request

2 Indicator light, front-seat passen‐

ger airbag 139

3 Reading lights 134

4 Ambient light 134

5 Panoramic glass sunroof 70

6 Interior lights 134

Online Edition for Part no. 01402983594 - X/17

Page 20

AT A GLANCE

Central Information Display (CID)

Vehicle features and op‐ tions

This chapter describes all standard, countryspecific and optional features offered with the series. It also describes features that are not necessarily available in your vehicle, e. g., due to the selected options or country versions. This also applies to safety-related functions and sys‐ tems. When using these functions and systems, the applicable laws and regulations must be observed.

Concept

The Central Information Display (CID) combines the functions of a multitude of switches. These functions can be operated via the Controller or touchscreen.

Safety information

WARNING

Operating the integrated information sys‐ tems and communication devices while driving can distract from traffic. It is possible to lose control of the vehicle. There is a risk of an acci‐ dent. Only use the systems or devices when the traffic situation allows. If necessary, stop and use the systems and devices while the vehicle is stationary.◀

Control elements

Overview

1 Control Display with touchscreen

2 Controller with buttons and, depending on

the equipment version, with touchpad

Control Display

General information

To clean the Control Display, follow the care in‐ structions, refer to page 275.

In the case of very high temperatures on the Control Display, for instance due to intense so‐ lar radiation, the brightness may be reduced down to complete deactivation. Once the tem‐ perature is reduced, for instance through shade or air conditioning, the normal functions are re‐ stored.

Safety information

NOTE

Objects in the area in the front of the Control Display can shift and damage the Con‐ trol Display. There is a risk of damage to prop‐ erty. Do not place objects in the area in front of the Control Display.◀

Switching on

Switch on the ignition.

Online Edition for Part no. 01402983594 - X/17

Page 21

2. Press the Controller.

Switching off

Central Information Display (CID)

AT A GLANCE

2. "Turn off control display"

Press button.

Controller with navigation system

General information

The buttons can be used to open the menus di‐ rectly. The Controller can be used to select menu items and enter the settings.

Some functions of the Central Information Dis‐ play (CID) can be operated using the touchpad on the Controller, refer to page 26:

Operation

▷ Turn.

▷ Move in four directions.

Buttons on the Controller

Button Function

Press once: call up main menu.

Press twice: open recently used me‐ nus.

Open the Communication menu.

▷ Press.

Open the Media/Radio menu.

Open destination input menu for navi‐ gation.

Open navigation map.

Open the previous display.

Open the Options menu.

Online Edition for Part no. 01402983594 - X/17

Page 22

AT A GLANCE

Central Information Display (CID)

Controller without navigation system

General information

The buttons can be used to open the menus di‐ rectly. The Controller can be used to select menu items and enter the settings.

Some functions of the Central Information Dis‐ play (CID) can be operated using the touchpad on the Controller, refer to page 26:

Operation

▷ Turn.

▷ Press.

Buttons on the Controller

Button Function

Press once: call up main menu.

Press twice: open recently used me‐ nus.

Open the Communication menu.

Open the Media/Radio menu.

Open the previous display.

Open the Options menu.

Operating with the Con‐ troller

Opening the main menu

Press button.

▷ Move in two directions.

The main menu is displayed.

All Central Information Display (CID) functions can be called up via the main menu.

Online Edition for Part no. 01402983594 - X/17

Page 23

Central Information Display (CID)

AT A GLANCE

Selecting menu items

Highlighted menu items can be selected.

1. Turn the Controller until the desired menu

item is highlighted.

2. Press the Controller.

Menu items in the Owner's Manual

In the Owner's Manual, menu items that can be selected are set in quotation marks, for in‐ stance "System settings".

Changing between displays

After a menu item is selected, for instance "System settings", a new display appears.

▷ Move the Controller to the left.

Closes the current display and shows the previous display.

▷

▷ Move the Controller to the right.

Press button.

The previous display opens.

New display is opened.

Opening recently used menus

The recently used menus can be displayed.

Press button twice.

Opening the Options menu

Press button.

The "Options" menu is displayed.

The Options menu consists of various areas:

▷ Screen settings, for instance "Split screen".

▷ Control options for the selected main

menu, for instance for "Media/Radio".

▷ If applicable, further operating options for

the selected menu, for instance "Save station".

Changing settings

Select a field.

2. Turn the Controller until the desired setting

is displayed.

The arrow indicates that additional displays can be opened.

Online Edition for Part no. 01402983594 - X/17

3. Press the Controller.

Page 24

AT A GLANCE

Central Information Display (CID)

Activating/deactivating the functions

Several menu items are preceded by a check‐ box. It indicates whether the function is acti‐ vated or deactivated. Selecting the menu item activates or deactivates the function.

Function is activated.

Function is deactivated.

Entering letters and numbers

General information

Letters and numbers can be entered via the Controller.

The keyboard's display changes automatically.

Input

Turn the Controller: select letters or num‐

bers.

2. : confirm entry.

Symbol Function

Press the Controller: delete let‐

ters or number.

Hold the Controller down: delete all letters or numbers.

Switching between upper/lower case, numbers and characters

Depending on the menu, you can switch be‐ tween entering upper and lower case letters and numbers:

Symbol Function

Enter the letters.

Entry comparison

When entering names and addresses, the choice is narrowed down with every letter en‐ tered and letters may be added automatically.

Entries are continuously compared with data stored in the vehicle.

▷ Only those letters are offered during entry

for which data is available.

▷ Destination search: place names can be en‐

tered in all languages that are available on the Control Display.

Using alphabetical lists

For alphabetical lists with more than 30 entries, the letters for which there is an entry are dis‐ played at the left edge.

Turn the Controller to the left or right

quickly.

All letters for which there are entries are displayed on the left edge.

2. Select the first letter of the desired entry.

The first entry of the selected letter is dis‐ played.

Operating via touch‐ screen

General information

The Control Display is equipped with a touch‐ screen.

Touch screen with your fingers. Do not use any objects.

Enter the numbers.

Without navigation system

Select the symbol.

Change between capital and lower-case letters.

Opening the main menu

Tap on symbol.

Online Edition for Part no. 01402983594 - X/17

Page 25

Central Information Display (CID)

▷ Swipe to the left.

▷ Tap on symbol.

New display is opened.

Opening recently used menus

1. Tap on symbol.

2. Tap on symbol.

AT A GLANCE

All Central Information Display (CID) functions can be called up via the main menu.

Selecting menu items

Tap desired menu item.

Menu items in the Owner's Manual

In the Owner's Manual, menu items that can be selected are set in quotation marks, for in‐ stance "System settings".

Changing between displays

After a menu item is selected, a new display opens.

Changing settings

Settings such as volumes can be changed via the touchscreen.

▷ Slide in the selected field to the right or left,

until the desired setting is displayed.

▷ , Tap on symbol.

Activating/deactivating the functions

Several menu items are preceded by a check‐ box. It indicates whether the function is acti‐ vated or deactivated. Selecting the menu item activates or deactivates the function.

Function is activated.

Function is deactivated.

Entering letters and numbers

The arrow indicates that additional displays can be opened.

Online Edition for Part no. 01402983594 - X/17

General information

Letters and numbers can be entered using the Controller or the touchscreen.

The keyboard's display changes automatically.

Page 26

AT A GLANCE

Central Information Display (CID)

Symbol Function

Tapping the symbol: delete the letter

or number.

Tapping and holding the symbol for

an extended period: delete all letters or numbers.

Switching between upper/lower case, numbers and characters

Symbol Function

Enter the letters.

Enter the numbers.

or Change between capital and

lower-case letters.

Operating navigation map

The navigation map can be moved with the touchscreen.

Function Operation

Enlarge/shrink map.

Drag in or out with the fin‐ gers.

Touchpad

General information

Some functions of the Central Information Dis‐ play (CID) can be operated using the touchpad on the Controller:

Selecting functions

"My MINI"

2. "System settings"

3. "Touchpad"

4. Select the desired function.

▷ "Speller": enter letters and numbers.

▷ "Map": using the map.

▷ "Search fields": write letters without se‐

lecting the list field.

▷ "Audio feedback": pronounces entered

letters and numbers.

Entering letters and numbers

Entering letters requires some practice at the beginning. When entering, pay attention to the following:

▷ The system distinguishes between upper

and lower-case letters and numbers. To make entries, it may be necessary to change between upper and lower-case let‐ ters, numbers and characters, refer to page 24.

▷ Enter characters as they are displayed on

the Control Display.

▷ Always enter associated characters, such as

accents or periods so that the letter can be clearly recognized. The set language deter‐ mines what input is possible. Where neces‐ sary, enter special characters via the Con‐ troller.

▷ To delete a character, swipe to the left on

the touchpad.

▷ To enter a blank space, swipe to the right in

the center of the touchpad.

▷ To enter a hyphen, swipe to the right in the

upper area of the touchpad.

▷ To enter an underscore, swipe to the right

in the lower area of the touchpad.

Using the map

The map in the navigation system can be moved via the touchpad.

Function Operation

Move map. Swipe in the appropriate di‐

rection.

Enlarge/shrink map.

Display menu. Tap once.

Drag in or out on the touch‐ pad with fingers.

Online Edition for Part no. 01402983594 - X/17

Page 27

Central Information Display (CID)

AT A GLANCE

Split screen

General information

Additional information can be displayed on the right side of the split screen, for instance infor‐ mation from the Onboard Computer.

In the divided screen view, the so-called split screen, this information remains visible even when switching to another menu.

Switching the split screen on/off

2. "Split screen"

Selecting the display

The display can be selected in menus, where the split screen is supported.

2. Press the Controller.

Press button.

Move the Controller to the right until the split screen is selected.

Status information

General information

The status field can be found in the upper area of the Control Display. Status information is dis‐ played in the form of symbols.

Status field symbols

Radio

Symbol Meaning

HD Radio station is being received.

Satellite radio is switched on.

Telephone

Symbol Meaning

Incoming or outgoing call.

Missed call.

Signal strength of cellular network.

Symbol flashes: network search.

Cellular network is not available.

3. Select the desired setting.

Specifying the number of displays

It is possible to specify the number of displays.

Move the Controller to the right until the

split screen is selected.

2. Press the Controller.

3. "Personalize menu"

4. Select the desired setting.

5. Move the Controller to the left.

Online Edition for Part no. 01402983594 - X/17

Roaming is active.

SMS text message received.

Message received.

Reminder.

Sending not possible.

Contacts are loaded.

Entertainment

Symbol Meaning

Music collection.

AUX-IN port.

Bluetooth audio.

Page 28

AT A GLANCE

Central Information Display (CID)

Symbol Meaning

USB audio interface.

Mobile phone audio interface.

iPod.

Additional symbols

Symbol Meaning

Check Control message.

The sound output has been switched

off.

Encrypted connection not active.

Request for the current vehicle posi‐

tion.

Programmable memory buttons

General information

The Central Information Display (CID) functions can be stored on the programmable memory buttons and called up directly, for instance radio stations, navigation destinations, phone numbers and menu entries.

Settings are stored for the driver profile cur‐ rently used.

The function will work immediately. This means, for instance that the number is dialed when a phone number is selected.

Displaying the key assignment

Touch buttons with finger. Do not wear gloves or use objects.

The button assignment is displayed at the top edge of screen.

Deleting the button assignments

Press buttons 1 and 6 simultaneously for

approx. 5 seconds.

2. "OK"

Storing a function

Select the function via the Central Informa‐

tion Display (CID).

Press and hold the desired button,

until a signal sounds.

Running a function

Press button.

Online Edition for Part no. 01402983594 - X/17

Page 29

Voice activation system

AT A GLANCE

Vehicle features and op‐ tions

Concept

Most functions displayed on the Control Display can be operated by voice commands via the voice activation system. The system supports you with announcements during input.

General information

▷ Functions that can only be used when the

vehicle is stationary can only be operated via the voice activation system to a limited extent.

▷ The system uses a special microphone on

the driver's side.

▷ ›...‹ in the Owner's Manual denotes verbal

instructions to use with the voice activation system.

▷ Say the commands, numbers, and letters

smoothly and with normal volume, empha‐ sis, and speed.

▷ Always say commands in the language of

the voice activation system.

Functional requirements

Via the Control Display, set a language that is also supported by the voice activation system so that the spoken commands can be identi‐ fied.

To set the language, refer to page 32.

Using the voice activa‐ tion system

Activating the voice activation system

1. Press button on the steering wheel.

2. Wait for the signal.

3. Say the command.

This symbol in the instrument cluster indi‐

cates that the voice activation system is active.

If no other commands are available, operate the function via the Central Information Display (CID).

Terminating the voice activation system

Press the button on the steering wheel or ›Cancel‹.

Possible commands

General information

Most menu items on the Control Display can be voiced as commands.

Commands from other menus can also be spo‐ ken.

You may select list entries such as phone list entries via voice activation. Read these list en‐

Online Edition for Part no. 01402983594 - X/17

Page 30

AT A GLANCE

Voice activation system

tries out loud exactly as they are shown in the respective list.

Displaying possible commands

The following is displayed in the top area of the Control Display:

▷ Some possible commands for the current

menu.

▷ Some possible commands from other me‐

nus.

▷ Status of the voice recognition.

▷ Encrypted connection is not available.

Help on the voice activation system

▷ To have information on the operating prin‐

ciple of the voice activation system read out loud: ›General information on voice control‹.

▷ To have help for the current menu read out

loud: ›Help‹.

Example: opening the tone settings

The commands of the menu items are spoken just as they are selected via the Controller.

Switch on the Entertainment sound output,

if needed.

3. ›Media and radio‹

4. ›Tone‹

Press button on the steering wheel.

Settings

Setting the voice dialog

You can set the system to use standard dialog or a short version.

The short version of the voice dialog plays back short messages in abbreviated form.

1. "My MINI"

2. "System settings"

3. "Language"

4. "Speech mode:"

5. Select the desired setting.

Selecting the input language

For some languages, the input language can be selected.

"My MINI"

2. "System settings"

3. "Language"

4. "Voice control:"

5. Select the desired setting.

Activating voice recognition via the server

The voice recognition feature via the server provides a dictation function and a natural method of entering destinations while improv‐ ing the quality of voice recognition. To use the functions, data is transmitted to a service pro‐ vider via an encrypted connection and stored locally there.

"My MINI"

2. "System settings"

3. "Language"

4. "Server speech recognition"

Speaking during voice output

It is possible to answer during inquiries of the voice activation system. The function can be deactivated if inquiries are often undesirably interrupted, for instance due to background noise or talking.

"My MINI"

2. "System settings"

Online Edition for Part no. 01402983594 - X/17

Page 31

Voice activation system

3. "Language"

4. "Speaking during voice output"

Adjusting the volume

Turn the volume button during the spoken in‐ structions until the desired volume is set.

▷ The volume remains constant even if the

volume of other audio sources is changed.

▷ The volume is stored for the profile cur‐

rently used.

Information on Emer‐ gency Requests

Do not use the voice activation system to ini‐ tiate an Emergency Request. In stressful situa‐ tions, the voice and vocal pitch can change. This can unnecessarily delay the establishment of a phone connection.

AT A GLANCE

Environmental condi‐ tions

▷ Keep the doors, windows, and glass sun‐

roof closed to prevent noise interference.

▷ Avoid making other noise in the vehicle

while speaking.

Online Edition for Part no. 01402983594 - X/17

Page 32

AT A GLANCE

General settings

Vehicle features and op‐ tions

Language

Setting the language

Via the Central Information Display (CID):

"My MINI"

2. "System settings"

3. "Language"

4. "Language:"

5. Select the desired setting.

The setting is stored for the driver profile cur‐ rently used.

Setting the voice dialog

Voice dialog for the voice activation system, re‐ fer to page 30.

Time

4. "Time zone:"

5. Select the desired setting.

The setting is stored for the driver profile cur‐ rently used.

Setting the time

Via the Central Information Display (CID):

1. "My MINI"

2. "System settings"

3. "Date and time"

4. "Time:"

5. Turn the Controller until the desired hours

are displayed.

6. Press the Controller.

7. Turn the Controller until the desired mi‐

nutes are displayed.

8. Press the Controller.

The setting is stored for the driver profile cur‐ rently used.

Setting the time format

Via the Central Information Display (CID):

"My MINI"

2. "System settings"

3. "Date and time"

4. "Time format:"

5. Select the desired setting.

The setting is stored for the driver profile cur‐ rently used.

Setting the time zone

Via the Central Information Display (CID):

"My MINI"

2. "System settings"

3. "Date and time"

Online Edition for Part no. 01402983594 - X/17

Page 33

General settings

AT A GLANCE

Date

Setting the date

Via the Central Information Display (CID):

1. "My MINI"

2. "System settings"

3. "Date and time"

4. "Date:"

5. Turn the Controller until the desired day is

displayed.

6. Press the Controller.

7. Make the settings for the month and year.

The setting is stored for the driver profile cur‐ rently used.

Setting the date format

Via the Central Information Display (CID):

"My MINI"

2. "System settings"

3. "Date and time"

4. "Date format:"

5. Select the desired setting.

The setting is stored for the driver profile cur‐ rently used.

Setting the units of measurement

You can set the units of measurement for some values, for example, fuel consumption, distan‐ ces and temperature.

Via the Central Information Display (CID):

"My MINI"

2. "System settings"

3. "Units"

4. Select the desired menu item.

5. Select the desired setting.

The setting is stored for the driver profile cur‐ rently used.

Activating/deactivating popup windows

For some functions, popup windows are dis‐ played automatically on the Control Display. Some of these popup windows can be acti‐ vated or deactivated.

Via the Central Information Display (CID):

1. "My MINI"

2. "System settings"

3. "Pop-ups"

4. Select the desired setting.

The setting is stored for the driver profile cur‐ rently used.

Control Display

Brightness

Via the Central Information Display (CID):

"My MINI"

2. "System settings"

3. "Displays"

4. "Control display"

5. "Brightness at night"

6. Turn the Controller until the desired bright‐

ness is set.

7. Press the Controller.

The setting is stored for the driver profile cur‐ rently used.

Depending on the light conditions, the bright‐ ness settings may not be clearly visible.

Online Edition for Part no. 01402983594 - X/17

Page 34

AT A GLANCE

General settings

Screensaver

If no entries are made via the Central Informa‐ tion Display (CID), a screensaver can be dis‐ played after an adjustable time.

Via the Central Information Display (CID):

1. "My MINI"

2. "System settings"

3. "Displays"

4. "Control display"

5. "Screensaver"

6. Select the desired setting.

The setting is stored for the driver profile cur‐ rently used.

Messages

Concept

The menu centrally displays all messages arriv‐ ing in the vehicle in list form.

General information

The following messages can be displayed:

▷ Traffic messages.

▷ Check Control messages.

▷ Communication messages, for example e-

mails, SMS text messages or reminders.

▷ Service requirements messages.

Messages are additionally displayed in the sta‐ tus field.

Retrieving messages

Via the Central Information Display (CID):

"Notifications"

2. Select the desired message.

The respective menu is opened, where the message is displayed.

Deleting messages

All messages, except Check Control messages, can be deleted from the list. Check Control messages are displayed as long as they are rel‐ evant.

Via the Central Information Display (CID):

1. "Notifications"

2. Select the desired message.

4. "Delete this notification" or "Delete all

Press button.

notifications"

Settings

The following settings can be adjusted:

▷ Select the applications, from which mes‐

sages will be permitted.

▷ Sort the messages according to date or pri‐

ority.

Via the Central Information Display (CID):

"My MINI"

2. "System settings"

3. "Notifications"

4. Select the desired setting.

Data protection

Data transfer

Concept

The vehicle offers various functions which re‐ quire data to be transferred to MINI or a service provider. The data transfer can be deactivated for some functions.

General information

With data transfer deactivated, the respective function cannot be used.

Only make these settings while stationary.

Online Edition for Part no. 01402983594 - X/17

Page 35

General settings

AT A GLANCE

Activating/deactivating the data transfer

Follow the instructions on the Control Display.

Via the Central Information Display (CID):

1. Switch on the ignition.

2. "My MINI"

3. "System settings"

4. "Data privacy"

5. Select the desired setting.

Deleting personal data in the vehicle

Concept

Depending on the usage, the vehicle stores personal data, such as stored radio stations. This personal data can be permanently deleted via the Central Information Display (CID).

General information

Depending on the vehicle equipment, the fol‐ lowing data is deleted:

▷ Driver profile settings.

▷ Stored radio stations.

▷ Stored programmable memory buttons.

▷ Travel and Onboard Computer information.

▷ Music collection.

▷ Navigation, for instance stored destina‐

tions.

▷ Phone book.

▷ Office data, for instance voice notes.

▷ Login accounts.

Altogether, the deletion of the data can take up to 15 minutes.

Via the Central Information Display (CID):

1. Switch on the ignition.

2. "My MINI"

3. "System settings"

4. "Data privacy"

5. "Delete personal data"

6. "Delete personal data"

7. "OK"

8. Exit and lock the vehicle.

After 15 minutes, the deletion process is com‐ pleted.

If not all of the data was deleted, repeat the deletion.

Canceling deletion

Start the engine to cancel deletion of the data.

Connections

Concept

Various connection types are available for using mobile devices in the vehicle. The connection type to select depends on the mobile device and the desired function.

General information

The following overview shows possible func‐ tions and the suitable connection types for them. The scope of functions depends on the mobile device.

Functional requirement

Data can only be deleted while stationary.

Deleting data

Heed and follow the instructions on the Control Display.

Online Edition for Part no. 01402983594 - X/17

Page 36

AT A GLANCE

General settings

Function Connection

Making calls via the hands-free system.

Using phone functions via the Central Information Display (CID).

Using the smartphone Office functions.

Playing music from the smart‐ phone or the audio player.

Using compatible apps via the Central Information Display (CID).

USB storage device:

Exporting and importing driver profiles.

Performing software updates.

Playing music.

Playing videos from the smart‐ phone or the USB storage de‐ vice.

Using Apple CarPlay apps via the Central Information Display (CID) and voice operation.

The following connection types require onetime pairing with the vehicle:

▷ Bluetooth.

▷ Apple CarPlay

Paired devices are automatically recognized later on and connected to the vehicle.

type

Bluetooth.

Bluetooth or USB.

USB.

Bluetooth and WiFi.

Safety information

WARNING

traffic situation allows. If necessary, stop and use the systems and devices while the vehicle is stationary.◀

Compatible devices

General information

Information on mobile devices compatible with the vehicle can be found at www.miniusa.com/ bluetooth.

Malfunctions may occur with devices not listed or deviating software versions.

Displaying the vehicle identification number and software part number

When looking for compatible devices, you may have to state the vehicle identification number and the software part number. These numbers can be displayed in the vehicle.

Via the Central Information Display (CID):

"My MINI"

2. "System settings"

3. "Mobile devices"

4. "Settings"

5. "Bluetooth® info"

6. "System information"

A software update, refer to page 41, can be performed, if needed.

Bluetooth connection

Functional requirements

▷ Compatible device, refer to page 36, with

Bluetooth interface.

▷ The remote control is in the vehicle.

▷ The device is ready for operation.

▷ Bluetooth is activated on the device and in

the vehicle, refer to page 37.

▷ Bluetooth pre-settings, such as visibility,

may be required on the device; refer to the owner's manual of the device.

Online Edition for Part no. 01402983594 - X/17

Page 37

General settings

AT A GLANCE

Switching on Bluetooth

Via the Central Information Display (CID):

1. "My MINI"

2. "System settings"

3. "Mobile devices"

4. "Settings"

5. "Bluetooth®"

Activating/deactivating telephone functions

To use all supported functions of a mobile phone, the following functions must be acti‐ vated prior to pairing.

Via the Central Information Display (CID):

"My MINI"

2. "System settings"

3. "Mobile devices"

4. "Settings"

5. Select desired setting:

▷ "Office"

Activate function to transmit short mes‐ sages, e-mails, calendars, tasks, notes, and reminders to the vehicle. Costs can be incurred by transmitting all data to the vehicle.

▷ "Contact images"

Activate function to show the contact pictures.

6. Move the Controller to the left.

Pairing the mobile device with the vehicle

Via the Central Information Display (CID):

"My MINI"

2. "System settings"

3. "Mobile devices"

4. "Connect new device"

5. Select the functions for which the device

will be used:

▷ "Telephone"

▷ "Bluetooth® audio"

▷ "Apps"

▷ "Apple CarPlay"

The Bluetooth name of the vehicle is dis‐ played on the Control Display.

6. Search for Bluetooth devices in the vicinity

of the mobile device.

The Bluetooth name of the vehicle appears on the mobile device display.

Select the Bluetooth name of the vehicle.

7. Depending on the mobile device, a control

number is displayed or the control number must be entered.

▷ Compare the control number displayed

on the Control Display with the control number on the display of the device.

Confirm the control number on the de‐ vice and on the Control Display.

▷ Enter and confirm the same control

number on the device and via the Cen‐ tral Information Display (CID).

The device is connected and displayed in the device list.

If connection was not successful: Frequently Asked Questions, refer to page 37.

Frequently asked questions

All requirements are met and all required steps were completed in the specified order. Despite that, the mobile device does not function as ex‐ pected.

In this case, the following explanations can help:

Why could the mobile phone not be paired or connected?

▷ There are too many Bluetooth devices con‐

nected to the mobile phone or vehicle.

In the vehicle, delete Bluetooth connec‐ tions with other devices.

Online Edition for Part no. 01402983594 - X/17

Page 38

AT A GLANCE

General settings

Delete all known Bluetooth connections from the device list on the mobile phone and start a new device search.

▷ The mobile phone is in power-save mode

or has only a limited remaining battery life.

Charge mobile phone.

Why does the mobile phone no longer react?

▷ The applications on the mobile phone do

not function anymore.

Switch the mobile phone off and on again.

▷ Possibly too high or too low ambient tem‐

peratures for mobile phone operation.

Do not subject the mobile phone to ex‐ treme ambient temperatures.

Why can phone functions not be used via the Central Information Display (CID)?

▷ The mobile phone may not be properly

configured, for instance as Bluetooth audio device.

Connect the mobile phone with the tele‐ phone or additional phone function.

Why are no or not all phone book entries dis‐ played or why are they incomplete?

▷ Transmission of the phone book entries is

not yet complete.

▷ It is possible that only the phone book en‐

tries of the mobile phone or the SIM card are transmitted.

▷ It may not be possible to display phone

book entries with special characters.

▷ It may not be possible to transmit contacts

from social networks.

▷ The number of phone book entries to be

stored is too high.

▷ Data volume of the contact too large, for

instance due to stored information such as notes.

Reduce the data volume of the contact.

▷ A mobile phone can only be connected as

audio source or as telephone.

Configure the mobile phone and connect it with the telephone or additional phone function.

How can the phone connection quality be im‐ proved?

▷ The strength of the Bluetooth signal on the

mobile phone can be adjusted, depending on the mobile phone.

▷ Insert mobile phone into the wireless

charging tray.

▷ Adjust the volume of the microphone and

loudspeakers separately.

If all points in this list have been checked and the required function is still not available, con‐ tact the hotline, a dealer’s service center or an‐ other qualified service center or repair shop.

USB connection

General information

Mobile devices with a USB port are connected to the USB interface.

▷ Mobile phones.

▷ Audio devices with USB port, for instance

MP3 player.

▷ USB storage devices.

Common file systems are supported. FAT32 and exFAT are the recommended formats.

The following applications are possible:

▷ Exporting and importing driver profiles, re‐

fer to page 63.

▷ Playing music files via USB audio.

▷ Playing videos via USB video.

▷ Loading of software updates, refer to

page 41.

Follow the following when connecting:

▷ Do not use force when plugging the con‐

nector into the USB interface.

▷ Use a flexible adapter cable.

▷ Protect the USB storage device against me‐

chanical damage.

Online Edition for Part no. 01402983594 - X/17

Page 39

General settings

AT A GLANCE

▷ Due to the large number of USB media

available on the market, it cannot be guar‐ anteed that every device is operable on the vehicle.

▷ Do not expose USB media to extreme envi‐

ronmental conditions, such as very high temperatures; refer to the owner's manual of the device.

▷ Due to the many different compression

techniques, proper playback of the media stored on the USB storage device cannot be guaranteed in all cases.

▷ A connected USB storage device will be

supplied with charging current via the USB interface if the device supports this.

▷ To ensure proper transmission of the stored

data, do not charge a USB storage device via the onboard socket, when it is con‐ nected to the USB interface.

▷ Depending on how the USB storage device

is being used, settings may be required on the USB storage device, refer to the owner's manual of the device.

Not compatible USB media:

▷ USB hard drives.

▷ USB hubs.

▷ USB memory card readers with multiple in‐

serts.

▷ HFS-formatted USB media.

▷ Devices such as fans or lamps.

Functional requirement

Compatible device, refer to page 36, with USB interface.

Connecting the device

Connect the USB storage device using a suita‐ ble adapter cable to a USB interface, refer to page 191.

The USB storage device is connected to the ve‐ hicle and displayed in the device list.

Apple CarPlay preparation

Concept

CarPlay allows certain functions of a compatible Apple iPhone to be used via Siri voice operation and the Central Information Display (CID).

Functional requirements

▷ Compatible iPhone, refer to page 36.

iPhone 5 or later with iOS 7.1 or later.

▷ Corresponding mobile wireless contract.

▷ Bluetooth, WiFi, and Siri voice operation are

switched on on the iPhone.

Switching on Bluetooth and CarPlay

Via the Central Information Display (CID):

"My MINI"

2. "System settings"

3. "Mobile devices"

4. "Settings"

5. Select the following settings:

▷ "Bluetooth®"

▷ "Apple CarPlay"

Pairing iPhone with CarPlay

Pairing an iPhone with the vehicle, refer to page 37, via Bluetooth

Select CarPlay as the function:

"Apple CarPlay"

The iPhone is connected to the vehicle and dis‐ played in the device list, refer to page 40.

Operation

For more information, see the Integrated Own‐ er's Manual, Online Owner's Manual, MINI Driv‐ er's Guide app or the Owner's Manual for Navi‐ gation, Entertainment, and Communication.

Frequently asked questions

All requirements are met and all required steps were completed in the specified order. Despite

Online Edition for Part no. 01402983594 - X/17

Page 40

AT A GLANCE

General settings

that, the mobile device does not function as ex‐ pected.

In this case, the following explanations can help:

The iPhone has already been paired with Apple CarPlay. When a new connection is established, CarPlay can no longer be selected.

▷ Delete the iPhone concerned from the de‐

vice list.

▷ On the iPhone, delete the vehicle con‐

cerned from the list of stored vehicles un‐ der Bluetooth and under WiFi.

▷ Pair the iPhone as a new device.

If the steps listed have been carried out and the required function is still not available: contact the hotline, a dealer’s service center or another qualified service center or repair shop.

Managing mobile devices

General information

▷ After one-time pairing, the devices are au‐

tomatically recognized and reconnected when the ignition is switched on.

▷ The data stored on the SIM card or in the

mobile phone are transferred to the vehicle after recognition.

▷ For some devices, certain settings may be

necessary, for instance authorization, see owner's manual of the device.

Displaying the device list

All devices paired and/or connected with the vehicle are displayed in the device list.

Via the Central Information Display (CID):

"My MINI"

2. "System settings"

3. "Mobile devices"

A symbol indicates, for which function a device is used.

Symbol Function

"Telephone"

"Additional telephone"

"Bluetooth® audio"

"Apps"

"Apple CarPlay"

Configuring the device

Functions can be activated or deactivated for paired and connected devices.

Via the Central Information Display (CID):

"My MINI"

2. "System settings"

3. "Mobile devices"

4. Select the desired device.

5. Select the desired setting.

If a function is assigned to a device, the func‐ tion will be deactivated where appropriate for a device that is already connected and the device will be disconnected.

Disconnecting the device

The connection of the device to the vehicle is disconnected.

The device remains paired and can be con‐ nected again, refer to page 40.

Via the Central Information Display (CID):

"My MINI"

2. "System settings"

3. "Mobile devices"

4. Select device.

5. "Disconnect device"

Connecting the device

A disconnected device can be reconnected.

Online Edition for Part no. 01402983594 - X/17

Page 41

General settings

AT A GLANCE

Via the Central Information Display (CID):

1. "My MINI"

2. "System settings"

3. "Mobile devices"

4. Select device.

5. "Connect device"

The functions that were assigned to the device before disconnecting are assigned to the de‐ vice when it is reconnected. If the device is al‐ ready connected, these functions are deacti‐ vated.

Deleting the device

Via the Central Information Display (CID):

"My MINI"

2. "System settings"

3. "Mobile devices"

4. Select device.

5. "Delete device"

The device is disconnected and removed from the device list.

Swapping the telephone and additional phone

If two mobile phones are connected to the ve‐ hicle, the functions of the phone and additional phone can be switched.

Via the Central Information Display (CID):

"My MINI"

2. "System settings"

3. "Mobile devices"

4. "Settings"

5. "Swap telephone/additional tel."

Software update

General information

The vehicle supports a large number of mobile devices, for instance mobile phones and MP3 players. Software updates are available for

many of the supported devices. The vehicle is maintained up-to-date via regular vehicle soft‐ ware updates.

Updates and related current information is available on the Internet at www.mini.com/ update.

Displaying the installed software version

The software version installed in the vehicle is displayed.

Via the Central Information Display (CID):

"My MINI"

2. "System settings"

3. "Software update"

4. "Show current version"

If an update has been carried out before, select the desired version to display additional infor‐ mation.

Updating software via USB

The software may only be updated when the vehicle is stationary.

Via the Central Information Display (CID):

Store the file for the software update in the

main directory of a USB flash drive.

2. Connect the USB data storage to a USB in‐

terface.

3. "My MINI"

4. "System settings"

5. "Software update"

6. "Update software"

7. "USB"

8. "Install software"

9. "OK"

10. Wait for the update to complete.

11. Confirm system restart.

Online Edition for Part no. 01402983594 - X/17

Page 42

AT A GLANCE

General settings

Restoring the software version

The software version before the last software update and the version before the first software update can be restored.

The software may only be restored when the vehicle is stationary.

Via the Central Information Display (CID):

1. "My MINI"

2. "System settings"

3. "Software update"

4. "Restore software"

▷ "Previous version"

The previous software version is re‐ stored.

▷ "Default software settings"

The first software version is restored.

6. "Remove software"

7. "OK"

8. Wait for restore.

9. Confirm system restart.

Online Edition for Part no. 01402983594 - X/17

Page 43

Owner's Manual media

AT A GLANCE

Vehicle features and op‐ tions

General information

You can use various media formats to call up the content in the Owner's Manual. The follow‐ ing Owner's Manual media formats are availa‐ ble:

▷ Printed Owner's Manual, refer to page 43.

▷ Integrated Owner's Manual in the vehicle,

refer to page 43.

▷ MINI Motorer’s Guide App, refer to

page 44.

▷ Online Owner's Manual, refer to page 45.

There are different features, refer to page 46, in each of the different media formats.

General information

The Owner's Manual for Navigation, Entertain‐ ment, and Communication can be obtained as printed book from the service center.

Supplementary Owner's Manuals

Also follow the instructions of the Supplemen‐ tary Owner's Manuals, which are included in addition to the onboard literature.

Integrated Owner's Manual in the vehicle

Concept

The Integrated Owner's Manual specifically de‐ scribes features and functions found in the ve‐ hicle. The Integrated Owner's Manual can be displayed on the Control Display.

Selecting the Owner's Manual

1. Press button.

2. "My MINI"

3. "Owner's Manual"

4. Select the required method of accessing the

contents.

Printed Owner's Manual

Concept

The printed Owner's Manual describes all standard, country-specific, and optional fea‐ tures offered with the series.

Online Edition for Part no. 01402983594 - X/17

Scrolling through the owner's manual

Turn the Controller, until the next or previous contents are displayed.

Context help

General information

The section of the Owner's Manual relating to the function that is currently selected can be displayed directly.

Page 44

AT A GLANCE

Owner's Manual media

Opening via Central Information Display (CID)

Change directly to the Options menu from the function on the Control Display:

2. "Owner's Manual"

Press button.

Opening when a Check Control message is displayed

Directly from the Check Control message on the Control Display:

"Owner's Manual"

Changing between a function and the Owner's Manual

To switch from a function, for instance radio, to the Owner's Manual on the Control Display and to alternate between the two displays:

1. Press button.

2. "Owner's Manual"

3. Select the desired page in the Owner's

Manual.

To alternate continuously between the last dis‐ played function and the last displayed page of the Owner's Manual, repeat steps 4 & 5. Opens a new display every time.

Press button again to return to last

displayed function.

Press button to return to the page of

the Owner's Manual displayed last.

Programmable memory buttons

General information

The Owner's Manual can be stored on the pro‐ grammable memory buttons and called up di‐ rectly.

Storing

1. Select the desired entry point via the Cen‐

tral Information Display (CID):

▷ "Quick reference"

▷ "Search by pictures"

▷ "Keyword search"

▷ "Animations"

Press and hold the desired button,

until a signal sounds.

Executing

Press button.

The Owner's Manual is displayed im‐

mediately.

MINI Motorer’s Guide app

Concept

The app specifically describes features and functions found in the vehicle.

The app can be displayed on smartphones and tablets.

General information

The Owner's Manual is available in many coun‐ tries as an app for iOS or Android in the respec‐ tive Store.

Entering the vehicle identification number fil‐ ters the contents.

Vehicles

It is possible to store Owner's Manuals for vari‐ ous vehicles in the app.

It is also possible to test the app using a dem‐ onstration vehicle.

Operating systems and language

The app is available for the iOS and Android op‐ erating systems.

Online Edition for Part no. 01402983594 - X/17

Page 45

Owner's Manual media

AT A GLANCE

The Owner's Manual is downloaded in the lan‐ guage of the device.

Online Owner's Manual

Concept

The Online Owner's Manual specifically de‐ scribes features and functions found in the ve‐ hicle.

The Online Owner's Manual can be displayed in any of today's browsers.

General information

The Online Owner's Manual is available in many countries. An account on the customer portal may be required.

Entering the vehicle identification number fil‐ ters the contents.

Vehicles

It is possible to store several individual Owner's Manuals for various vehicles.

Language

The language is based on whichever language is set in the operating system.

Printing

You can use the print function for automatically formatting and printing out individual chapters.

Quick Reference Guide

The Quick Reference Guide provides informa‐ tion on how to operate the vehicle, how to use basic vehicle functions and what to do in case of a breakdown.

Search by illustrations

Based on illustrations, image search provides information and descriptions. This is helpful when the terminology for a feature is not at hand.

Frequently asked questions

This chapter provides answers to frequently asked questions about your vehicle and helpful links to additional information.

Quick links

The chapter on quick links explains the most important information and operating instruc‐ tions on the basis of various situations.

Videos

The videos explain the main functions of the systems.

Smart Scan

You can use Smart Scan to scan various sym‐ bols in the vehicle. After a brief explanation of the symbol in question appears, it is then possi‐ ble to display the chapter directly.

Smart Scan is only available for the iOS operat‐ ing system.

Media components

General information

The following components are not available to the same extent in all media formats.

Additional information on availability, refer to page 46.

Online Edition for Part no. 01402983594 - X/17

Keyword search

You can use keywords to search for information and descriptions in the media.

Page 46

AT A GLANCE

Owner's Manual media

Key features

Printed Integrated APP Online

All equipment included. X — — —

Equipment included in vehicle. — X X X

Quick Reference Guide. — X X X

Search by illustrations. — X X X

Frequently asked questions. — — X X

Quick links. — — X X

Videos. — X X X

Smart Scan. — — X —

Keyword search. X X X X

X: included.

—: not included.

Online Edition for Part no. 01402983594 - X/17

Page 47

MINI eDRIVE

AT A GLANCE

Vehicle features and op‐ tions

Hybrid system

Concept

This MINI is a hybrid vehicle. In addition to the combustion engine, the vehicle features a highvoltage system that consists of an electric mo‐ tor and a high-voltage battery among other things.

The hybrid system can move the vehicle purely electrically. It can also support the combustion engine in certain situations.

The vehicle can be charged, refer to page 218, via the charging socket at charging stations or household sockets.

Overview

1 Combustion engine

2 Control-system electronics, electric motor

3 Electric motor

4 High-voltage cables: orange

5 High-voltage battery

6 Charging socket

7 Vehicle battery

Functions while driving

General information

The vehicle does not consume any fuel while driving purely electrically. This enables environ‐ mentally friendly driving without emissions in inner-city traffic. If the combustion engine is used, the hybrid system support reduces fuel consumption even further.

In addition to this, the electric motor acts as an alternator: during braking and coasting, it con‐ verts the vehicle's kinetic energy into electrical energy. The electrical energy is stored in the high-voltage battery and is used to drive the electric motor.

Online Edition for Part no. 01402983594 - X/17

Electric driving: ePOWER.

Under certain conditions, refer to page 93, the vehicle is powered only by the electric mo‐ tor.

Variable drive type

The combustion engine drives the front axle and the electric motor the rear axle. Depending on the operating condition, the vehicle has the options of front-wheel drive, rear-wheel drive or bundled for four-wheel drive.

Follow the information about electric driving ePOWER, driving with the combustion engine POWER, and the driving stability control sys‐ tems.

Page 48

AT A GLANCE

MINI eDRIVE

Assistance from the electric motor

Driving off and accelerating require a lot of en‐ ergy.

To optimize acceleration and to reduce fuel consumption, the electric motor boosts the combustion engine, refer to page 95. To do this, the electric motor uses the energy saved in the high-voltage battery.

Driving with the combustion engine: POWER

The combustion engine, refer to page 94, provides the main drive power to move the ve‐ hicle. If necessary, the high-voltage battery is charged at the same time.

The hybrid system always starts the combus‐ tion engine automatically.

Auto Start/Stop function, coasting

The Auto Start/Stop function, refer to page 92, switches the combustion engine off while the vehicle is moving, when braking, when rolling to a halt, and while the vehicle is stopped. The condition of rolling with the com‐ bustion engine switched off is referred to as coasting. Convenience functions such as the automatic climate control are supplied by the high-voltage battery and can remain switched on.

Energy recovery: CHARGE

The high-voltage battery of the hybrid system is charged through energy recovery while driving.

The electric motor acts as a generator and con‐ verts the kinetic energy of the vehicle into elec‐ trical energy, refer to page 95.

Charging the vehicle

The high-voltage battery of the vehicle can be charged, refer to page 218, via the charging socket at charging stations or household sock‐ ets.

Regular and complete charging of the highvoltage battery reduces the fuel consumption by using electric energy.

Climate control while parking and charging

The hybrid system makes it possible to operate the automatic climate control prior to driving off and with the combustion engine switched off.

During vehicle charging or if the high-voltage battery is sufficiently charged, the car's interior can be can be cooled or heated in advance of the trip, refer to page 224.

The stationary climate control can also be switched on directly.

Display

The displays of the hybrid system provide infor‐ mation about the current state of hybrid opera‐ tion.

Energy-saving driving

To save energy while driving, read the following descriptions:

▷ Saving fuel, refer to page 211.

▷ Using the hybrid system efficiently, refer to

page 212.

▷ GREEN Mode.

▷ Adapting to the course of the road.

Safety of the hybrid system

Follow the information on safety, refer to page 49.

Long-term vehicle storage

Observe the information on vehicle storage and for longer idle periods, refer to page 275.

Online Edition for Part no. 01402983594 - X/17

Page 49

Safety of the hybrid system

AT A GLANCE

Vehicle features and op‐ tions

Working on the hybrid system

General information

The manufacturer of your vehicle recommends that no changes be made to the vehicle, for in‐ stance the retrofitting of accessories, that will have an effect on the vehicle’s hybrid system.

Safety information

DANGER

Improperly executed work, in particular maintenance and repair on the high-voltage system, can lead to electric shock. There is a risk of injury, fire and danger to life.

The manufacturer of your vehicle recommends that the work on the vehicle, in particular main‐ tenance and repair, be performed by a dealer’s service center or another qualified service cen‐ ter or repair shop.◀

Hybrid system

Contact with water

The hybrid system is typically safe even in the following example situations:

▷ Water in the footwell, for instance after a

rainstorm when sunroof was kept open.

▷ Vehicle is in water but only up to the al‐

lowed height.

▷ Fluid escapes in the cargo area.

Automatic deactivation

If an accident occurs, the hybrid system is switched off automatically to prevent risk of danger to occupants and other road users.

Read the information on What to do after an accident, refer to page 270.

Online Edition for Part no. 01402983594 - X/17

Page 50

HANDLE ME.

Online Edition for Part no. 01402983594 - X/17

Page 51

AT A GLANCE

CONTROLS

DRIVING TIPS

MOBILITY

REFERENCE

Online Edition for Part no. 01402983594 - X/17

Page 52

CONTROLS

Opening and closing

Vehicle features and op‐ tions

Remote control

General information

The vehicle is supplied with two remote con‐ trols with integrated key.

Each remote control contains a replaceable battery. Replacing the battery, refer to page 54.

You may set the key functions depending on the optional features and country-specific ver‐ sion. Settings, refer to page 65.

The vehicle stores personal settings for every remote control. Driver profile, refer to page 63.

The remote controls hold information about re‐ quired maintenance. Service data in the remote control, refer to page 255.

WARNING

Unlocking from the inside is only possible

with special knowledge.

Persons who spend a lengthy time in the vehi‐ cle while being exposed to extreme tempera‐ tures are at risk of injury or death. Do not lock the vehicle from the outside when there are people in it.◀

WARNING

Unattended children or animals can cause the vehicle to move and endanger them‐ selves and traffic, for instance due to the fol‐ lowing actions:

▷ Pressing the Start/Stop button.

▷ Releasing the parking brake.

▷ Opening and closing the doors or windows.

▷ Engaging selector lever position N.

▷ Using vehicle equipment.

There is a risk of accidents or injuries. Do not leave children or animals unattended in the ve‐ hicle. Take the remote control with you when exiting and lock the vehicle.◀

Overview

Safety information

WARNING

People or animals in the vehicle can lock the doors from the inside and lock themselves in. In this case, the vehicle cannot be opened from the outside. There is a risk of injury. Take the remote control with you so that the vehicle can be opened from the outside.◀

Online Edition for Part no. 01402983594 - X/17

1 Unlocking

2 Locking

3 Unlocking the tailgate

Page 53

Opening and closing

CONTROLS

With automatic tailgate operation: open the tailgate

4 Panic mode

Unlocking

Press button on the remote control.

Depending on the settings, refer to page 65, the following access points are unlocked.

▷ Driver's door.

Press the button of the remote control again to unlock the other vehicle access points.

▷ All doors and tailgate.

In addition, the following functions are exe‐ cuted:

▷ The settings stored in the driver profile, re‐

fer to page 63, are applied.

▷ The driver's seat is set to the last position

saved in the driver's profile. This function must be activated in the settings, refer to page 65.

▷ The interior lights, courtesy lights and the

MINI logo projection are switched on.

These functions are not available if the inte‐ rior lights were switched off manually.

▷ The welcome lights are switched on, if this

function was activated.

▷ Exterior mirrors folded through convenient

closing are folded open.

▷ The alarm system, refer to page 67, is

switched off.

The light functions may depend on the ambient brightness.

Convenient opening

Press and hold this button on the re‐ mote control after unlocking.

The windows and the glass sunroof are opened, as long as the button on the remote control is pressed.

Locking

1. Close the driver's door.

If the drive-ready state is still switched on when you lock the vehicle, the vehicle horn honks twice. In this case, the drive-ready state must be switched off by means of the Start/Stop but‐ ton.

Press button on the remote con‐

trol.

All doors and the tailgate are locked.

The alarm system, refer to page 67, is switched on.

Press and hold this button on the remote control in the area close to the ve‐ hicle after locking.

The exterior mirrors are folded in.

With Comfort Access: convenient closing

Safety information

WARNING

With convenient closing, body parts can be jammed. There is a risk of injury. Make sure that the area of movement of the doors is clear during convenient closing.◀

Closing

Press and hold this button on the re‐ mote control in the area close to the

vehicle.

The windows and the glass sunroof are closed, as long as the button on the remote control is pressed.

The exterior mirrors are folded in.

Online Edition for Part no. 01402983594 - X/17

Page 54

CONTROLS

Opening and closing

Switch on interior lights and courtesy light

Press button on the remote control with the vehicle locked.

The MINI logo projection is also switched on.

These functions are not available if the interior lights were switched off manually.

The light functions may depend on the ambient brightness.

After locking, wait 10 seconds before pressing the button again.

Tailgate

General information

To avoid locking it in the vehicle, do not place the remote control in the cargo area.

Depending on your vehicle's equipment and the country version, it is possible to specify whether the doors are also unlocked when un‐ locking with the remote control. Adjusting the settings, refer to page 65.

Safety information

WARNING

Body parts can be jammed when operat‐ ing the tailgate. There is a risk of injury. Make sure that the area of movement of the tailgate is clear during opening and closing.◀

Opening

Press and hold button on the remote control for approx. 1 second.

Without automatic tailgate operation:

The tailgate is unlocked and can be swung up‐ ward.

With automatic tailgate operation:

The tailgate opens automatically.

Panic mode

You can trigger the alarm system if you find yourself in a dangerous situation.

▷ Press button on the remote control

and hold for at least 3 seconds.

▷ Briefly press the button on the remote con‐

trol three times in succession.

To switch off the alarm: press any button.

Replacing the battery

Remove the integrated key from the re‐

mote control, refer to page 56.

2. Slide the integrated key into the opening

and raise the cover.

The battery compartment is accessible.

NOTE

The tailgate swings back and up when it opens. There is a risk of damage to property. Make sure that the area of movement of the tailgate is clear during opening and closing.◀

NOTE

Sharp-edged or pointed objects can hit the rear window and heat conductors while driving. There is a risk of damage to property. Cover the edges and ensure that pointed ob‐ jects do not hit the rear window.◀

Online Edition for Part no. 01402983594 - X/17

Page 55

Opening and closing

CONTROLS

3. Slide the integrated key in the cover of the

battery compartment and raise the cover.

4. Push battery in the direction of the arrow

using a pointed object and lift it out.

5. Insert a type CR 2032 battery with the posi‐

tive side facing up.

6. Insert lid and cover.

7. Push the integrated key into the remote

control until it engages.

Have old batteries disposed of by a dealer’s service center or another quali‐ fied service center or repair shop or

take them to a collection point.

Malfunction

General information

A Check Control message is displayed.

Remote control detection by the vehicle may malfunction under the following circumstances:

▷ The battery of the remote control is dis‐

charged. Replacing the battery, refer to page 54.

▷ Interference of the radio connection from

transmission towers or other equipment with high transmitting power.

▷ Shielding of the remote control due to

metal objects.

Do not transport the remote control to‐ gether with metal objects.

▷ Interference of the radio connection from

mobile phones or other electronic devices in direct proximity to the remote control.

Do not transport the remote control to‐ gether with electronic devices.

▷ Interference of radio transmission by a

charging process of mobile devices, for in‐ stance charging of a mobile phone.

▷ The remote control is in direct proximity of

the wireless charging tray.

Place the remote control down at a differ‐ ent location.

In the case of interference, the vehicle can be unlocked and locked from the outside with the integrated key, refer to page 56.

Additional remote controls

Additional remote controls are available from a dealer’s service center or another qualified service center or repair shop.

Loss of the remote controls

A lost remote control can be blocked and re‐ placed by a dealer’s service center or another qualified service center or repair shop.

Online Edition for Part no. 01402983594 - X/17

Page 56

CONTROLS

Opening and closing

Switching on the drive-ready state via emergency detection of the remote control

It is not possible to start the engine if the re‐ mote control has not been detected.

It is not possible to switch on the drive-ready state if the remote control has not been de‐ tected.

Proceed as follows in this case:

Hold the remote control as shown against

the marked area on the steering column. Pay attention to the display in the instru‐ ment cluster.

2. If the remote control is detected:

Switch on drive-ready state within 10 sec‐ onds.

If the remote control is not detected, slightly change the position of the remote control and repeat the procedure.

Integrated key

NOTE

The door lock is permanently joined with the door. The door handle can be moved. When pulling the door handle with the integrated key inserted, paint or the integrated key can be damaged. There is a risk of damage to property. Remove the integrated key before pulling the outside door handle.◀

Removing

Press the button, arrow 1, and pull out the integrated key, arrow 2.

Locking/unlocking via the door lock

Remove lid on the door lock.

To do this, slide the integrated key into the opening from below and remove the lid.

General information

The driver's door can be locked and unlocked without remote control using the integrated key.

Safety information

WARNING

Unlocking from the inside is only possible

with special knowledge.

Online Edition for Part no. 01402983594 - X/17

2. Unlock or lock the door lock using the

integrated key.

Page 57

Opening and closing

CONTROLS

The other doors must be unlocked or locked from the inside.

Alarm system

The alarm system is not switched on if the vehi‐ cle is locked with the integrated key.

The alarm system is triggered when the door is opened, if the vehicle has been unlocked via the door lock. In order to stop this alarm, un‐ lock vehicle with the remote control or switch on the ignition, if needed, through emergency detection of the remote control, refer to page 55.

Buttons for the central locking system

General information

In the event of a severe accident, the vehicle is automatically unlocked. The hazard warning system and interior lights come on.

Overview

Unlocking

Press button.

Opening

▷

▷ Front doors: pull the door handle on the

▷ Back doors: pull twice on the door handle

Press button to unlock the doors together, and then pull the door handle above the armrest.

door to open the door. The other doors re‐ main locked.

on the door to be opened; the first time un‐ locks the door, the second time opens it. The other doors remain locked.

Comfort Access

Concept

The vehicle can be accessed without activating the remote control.

All you need to do is to have the remote control with you, such as in your pants pocket.

The vehicle automatically detects the remote control when it is in close proximity or in the car's interior.

Buttons for the central locking system.

Locking

Press the button with the front doors closed.

The vehicle is not secured against theft when locking.

Online Edition for Part no. 01402983594 - X/17

General information

Comfort Access supports the following func‐ tions:

▷ Unlocking and locking the vehicle.

▷ Convenient closing.

▷ Open the tailgate.

▷ Opening/closing the tailgate with no-touch

activation.

Functional requirements

▷ To lock the vehicle, the remote control

must be located outside of the vehicle near the doors.

Page 58

CONTROLS

Opening and closing

▷ The next unlocking and locking cycle is not

possible until after approx. 2 seconds.

Unlocking

On the driver's or front passenger's outer door handle, press the button.

Depending on the settings, refer to page 65, only the driver's door may be unlocked. Unlike when unlocking with the remote control, press‐ ing the button on the outer door handle again does not unlock the other vehicle access points. Rather, the vehicle is locked again.

If a door of a locked vehicle was opened from the inside via the door opener, pressing the button on the outer door handle first locks the vehicle again. To unlock, the button on the outer door handle must be pressed again.

This is the case whether the vehicle was locked automatically after driving off or via the central locking system button from the inside.

Locking

Convenient closing

Safety information

WARNING

With convenient closing, body parts can be jammed. There is a risk of injury. Make sure that the area of movement of the doors is clear during convenient closing.◀

Closing

Press and hold down the button on the driver's or front passenger's outer door handle.

In addition to locking, the windows and glass sunroof will be closed.

The exterior mirrors are folded in.

Opening the tailgate

General information

If the tailgate is opened via Comfort Access, locked doors are not unlocked.

To avoid locking it in the vehicle, do not place the remote control in the cargo area.

On the driver's or front passenger's outer door handle, press the button.

Online Edition for Part no. 01402983594 - X/17

Safety information

WARNING

Body parts can be jammed when operat‐ ing the tailgate. There is a risk of injury. Make sure that the area of movement of the tailgate is clear during opening and closing.◀

Page 59

Opening and closing

CONTROLS

NOTE

The tailgate swings back and up when it opens. There is a risk of damage to property. Make sure that the area of movement of the tailgate is clear during opening and closing.◀

NOTE

Opening

Press button next on tailgate.

Without automatic tailgate operation:

The tailgate is unlocked and can be swung up‐ ward.

With automatic tailgate operation:

The tailgate opens automatically.

Opening and closing the split doors with no-touch activation

Concept

The tailgate can be opened and closed with notouch activation using the remote control you are carrying. Two sensors detect a forward-di‐ rected foot motion in the center of the area at the rear of the vehicle and the tailgate is opened or closed.

General information

To avoid locking it in the vehicle, do not place the remote control in the cargo area.

If the remote control is in the sensor area, the tailgate can be opened or closed inadvertently by an unconscious or alleged recognized foot movement.

The sensor has an approximate range of 5 ft/1.50 m extending from the rear of the vehi‐ cle.

If the tailgate is opened with no-touch activa‐ tion, locked doors are not unlocked.

Safety information

WARNING

During no-touch activation, vehicle parts may be touched, such as the hot exhaust gas system. There is a risk of injury. When moving your foot, make sure you have a firm stance and do not touch the vehicle.◀

WARNING

Body parts can be jammed when operat‐ ing the tailgate. There is a risk of injury. Make sure that the area of movement of the tailgate is clear during opening and closing.◀

NOTE

The tailgate swings back and up when it opens. There is a risk of damage to property. Make sure that the area of movement of the tailgate is clear during opening and closing.◀

Performing the foot movement

Stand in the middle behind the vehicle at

about an arm's length away from the rear of the vehicle.

2. Wave a foot under the vehicle in the direc‐

tion of travel and immediately pull it back.

Online Edition for Part no. 01402983594 - X/17

Page 60

CONTROLS

Opening and closing

With this movement, the leg must pass through the ranges of both sensors.

Opening

Perform the foot movement described earlier.

Before the opening, the hazard warning system flashes.

Moving your foot again will stop the opening motion, and moving it one more time after that will close the tailgate.

Closing

Perform the foot movement described earlier.

Before closing, the hazard warning system flashes and an acoustic signal sounds.

Moving your foot again will stop the closing motion, and moving it one more time after that will re-open the tailgate.

Malfunction

Remote control detection by the vehicle may malfunction under the following circumstances:

▷ The battery of the remote control is dis‐

charged. Replacing the battery, refer to page 54.

▷ Interference of the radio connection from

transmission towers or other equipment with high transmitting power.

▷ Shielding of the remote control due to

metal objects.

Do not transport the remote control to‐ gether with metal objects.

▷ Interference of the radio connection from

mobile phones or other electronic devices in direct proximity to the remote control.

Do not transport the remote control to‐ gether with electronic devices.

Wet or snowy conditions may disrupt the lock‐ ing request recognition function on the door handles.

In the case of a malfunction, unlock and lock the vehicle using the buttons of the remote control or using the integrated key, refer to page 56.

Tailgate

General information

To avoid locking it in the vehicle, do not place the remote control in the cargo area.

Safety information

WARNING

Body parts can be jammed when operat‐ ing the tailgate. There is a risk of injury. Make sure that the area of movement of the tailgate is clear during opening and closing.◀

NOTE

The tailgate swings back and up when it opens. There is a risk of damage to property. Make sure that the area of movement of the tailgate is clear during opening and closing.◀

NOTE

Sharp-edged or pointed objects can hit the rear window and heat conductors while driving. There is a risk of damage to property.

Online Edition for Part no. 01402983594 - X/17

Page 61

Opening and closing

CONTROLS

Cover the edges and ensure that pointed ob‐ jects do not hit the rear window.◀

Without automatic tailgate operation

Opening from the outside

▷ Without Comfort Access: unlock vehicle.

With Comfort Access: unlock the vehicle or have the remote control with you.

Press button next on tailgate.

▷ Press and hold button on the re‐

mote control for approx. 1 second.

Depending on the setting, the doors may also be unlocked. Unlocking with the re‐ mote control, refer to page 54.

The tailgate is unlocked and can be swung up‐ ward.

Opening from the inside

With Steptronic transmission:

With the vehicle stationary, press the button in the storage compartment of the driv‐ er's door upward.

If the vehicle is locked, selector lever position P must be engaged first.

Closing

Recessed grips on the interior trim of the tail‐ gate can be used to conveniently pull down the tailgate.

With automatic tailgate operation

Opening

Adjusting the opening height

You can set how far the tailgate should open.

When adjusting the opening height, ensure that there is a clearance of at least 4 in/10 cm above the tailgate.

Via the Central Information Display (CID):

"My MINI"

2. "Vehicle settings"

3. "Doors/Key"

4. "Tailgate"

5. Monitor the tailgate and set the desired

opening height.

From the outside

With manual transmission:

With the vehicle stationary, pull the button in the storage compartment of the driv‐ er's door upward twice in quick succession.

Online Edition for Part no. 01402983594 - X/17

▷ Without Comfort Access: unlock vehicle.

Page 62

CONTROLS

Opening and closing

With Comfort Access: unlock the vehicle or have the remote control with you.

Press the button on tailgate's exterior.

▷ Press and hold button on the re‐

mote control for approx. 1 second.

If the vehicle is stationary, the tailgate opens automatically to the adjusted opening height.

From the inside

With Steptronic transmission:

Pull button in the storage compartment

of the driver's door upward.

If the vehicle is locked, selector lever position P must be engaged first.

With manual transmission:

With the vehicle stationary, pull the but‐ ton in the storage compartment of the driver's door upward twice in quick succession.

If the vehicle is stationary, the tailgate opens automatically to the adjusted opening height.

Interruption of the opening procedure

The opening procedure is interrupted in the fol‐ lowing situations:

▷ When the vehicle starts moving.

▷ By pressing the button on the outside of

the tailgate. Pressing again closes the tail‐ gate.

▷ By pressing the button on the inside of the

tailgate. Pressing again closes the tailgate.

▷ By pressing the button on the remote con‐

trol. Pressing again closes the tailgate.

▷ By pressing or pulling the button in the

storage compartment of the driver's door. Pulling again continues the opening mo‐ tion.

Closing

From the outside

Press the button on tailgate's exterior.

From the inside

Press and hold the button in the storage compartment of the driver's door.

The remote control must be located in the car's interior for this function.

An acoustic signal sounds before the tailgate is closed.

From inside the tailgate

Without Comfort Access:

Press button on the inside of the tailgate.

With Comfort Access:

▷ Press button, arrow 1, on the inside of the

tailgate.

▷ Press button, arrow 2.

The vehicle will be locked after closing the tailgate. The driver's door must be closed for this purpose and the remote control

Online Edition for Part no. 01402983594 - X/17

Page 63

Opening and closing

CONTROLS

must be outside of the vehicle in the area of the tailgate.

Interruption of the closing procedure

The closing procedure is interrupted in the fol‐ lowing situations:

▷ If the vehicle starts off with a jerky move‐

ment.

▷ By pressing the button on the outside of

the tailgate. Pressing again closes the tail‐ gate.

▷ By pressing the button on the inside of the

tailgate. Pressing again closes the tailgate.

▷ By releasing the button in the storage com‐

partment of the driver's door. Pressing again and holding continues the closing motion.

Malfunction

Safety information

WARNING

With manual operation of a blocked tail‐ gate, it can release itself unexpectedly from the blockage. There is a risk of injury or risk of damage to property. Do not operate the tail‐ gate manually if it is blocked. Have it checked by a dealer’s service center or another qualified service center or repair shop.◀

Manual operation

Operate the unlocked tailgate manually with a slow and smooth motion.

To close the tailgate fully, press down lightly only. Closing occurs automatically.

Driver profile

Concept

In the driver profiles, individual settings for sev‐ eral drivers can be stored and called up again when required.

General information

There are three driver profiles with which per‐ sonal vehicle settings can be stored. Every re‐ mote control has one of these driver profiles assigned.

If the vehicle is unlocked using a remote con‐ trol, the assigned personal driver profile will be activated. All settings stored in the driver profile are automatically applied.

If several drivers use their own remote control, the vehicle will adjust the personal settings dur‐ ing unlocking. These settings are also restored, if the vehicle has been used in the meantime by a person with a different remote control.

Changes to the settings are automatically stored in the driver profile currently activated.

If another driver profile is selected via the Cen‐ tral Information Display (CID), the settings stored in it will be applied automatically. The new driver profile is assigned to the remote control currently used.

There is an additional guest profile available that is not assigned to any remote control: it can be used to apply settings in the vehicle without changing the personal driver profiles.

Functional requirements

For the system to be able to identify the driver profile associated to a particular driver, the de‐ tected remote control must be clearly allocated to the driver.

This is the case when:

▷ The driver is only carrying his or her own re‐

mote control.

▷ The driver unlocks the vehicle.

Online Edition for Part no. 01402983594 - X/17

Page 64

CONTROLS

Opening and closing

▷ The driver gets into the vehicle through the

driver's door.

Settings

The settings for the following systems and func‐ tions are stored in the active profile. The scope of storable settings depends on country and equipment.

▷ Unlocking and locking.

▷ Lights.

▷ Radio.

▷ Instrument cluster.

▷ Programmable memory buttons.

▷ Volumes, tone.

▷ Control Display.

▷ Climate control.

▷ Navigation.

▷ PDC Park Distance Control.

▷ Rearview camera.

▷ Head-up Display.

▷ MINI Driving Modes.

▷ Intelligent Safety.

▷ Driver's seat position, exterior mirror posi‐

tion.

Both the positions saved via the seat mem‐ ory and the last position set are saved.

Profile management

Selecting a driver profile

Regardless of the remote control in use, a dif‐ ferent driver profile may be activated. This al‐ lows you to call up personal vehicle settings, even if you did not unlock the vehicle with your own remote control.

Via the Central Information Display (CID):

"My MINI"

2. "Driver profiles"

3. Select driver profile.

4. "OK"

▷ All settings stored in the called-up driver

profile are automatically applied.

▷ The called-up driver profile is assigned to

the remote control being used at the time.

▷ If the driver profile is already assigned to a

different remote control, this driver profile will apply to both remote controls.

Using a guest profile

The guest profile is for individual settings that are stored in none of the three personal driver profiles.

Via the Central Information Display (CID):

"My MINI"

2. "Driver profiles"

3. "Drive off (guest)"

4. "OK"

The guest profile cannot be renamed. It is not assigned to the current remote control.

Renaming a driver profile

A personal name can be assigned to the active driver profile to avoid confusion between the driver profiles.

Via the Central Information Display (CID):

"My MINI"

2. "Driver profiles"

3. Select driver profile.

The driver profile marked with this sym‐

bol can be renamed.

4. "Change driver profile name"

5. Enter profile name.

6. Select the symbol.

Resetting a driver profile

The settings of the driver profile currently in use are reset to their factory settings.

Online Edition for Part no. 01402983594 - X/17

Page 65

Opening and closing

CONTROLS

Via the Central Information Display (CID):

1. "My MINI"

2. "Driver profiles"

3. Select driver profile.

The driver profile marked with this sym‐

bol can be reset.

4. "Reset driver profile"

5. "OK"

Exporting driver profiles

Most settings of the active driver profile can be exported.

Exporting is helpful when storing and retrieving personal settings, for instance before delivering the vehicle to a workshop. The stored driver profiles can be taken into another vehicle.

Via the Central Information Display (CID):

"My MINI"

2. "Driver profiles"

3. Select driver profile.

The driver profile marked with this sym‐

bol can be exported.

4. "Export driver profile (USB)"

Select USB storage device as needed.

5. Select the driver profile to be imported.

Displaying driver profiles during start

The driver profiles can be displayed during each start to select the desired profile.

Via the Central Information Display (CID):

1. "My MINI"

2. "Driver profiles"

3. "Show driver profiles at startup"

System limits

A clear assignment between the remote control and driver may not be possible in the following cases, for example.

▷ The passenger unlocks the vehicle with his

or her own remote control, but another person is driving.

▷ The driver unlocks the vehicle via Comfort

Access and has multiple remote controls with him or her.

▷ The driver changes, but the vehicle is not

locked and unlocked.

▷ Multiple remote controls are located out‐

side of the vehicle.

Importing driver profiles

Profiles stored on a USB storage device can be imported via the USB interface.

The existing settings of the active driver profile are overwritten with the settings of the im‐ ported driver profile.

Via the Central Information Display (CID):

"My MINI"

2. "Driver profiles"

3. Select the driver profile to overwrite.

The driver profile marked with this sym‐

bol can be overwritten.

4. "Import driver profile (USB)"

Online Edition for Part no. 01402983594 - X/17

Settings

General information

Depending on your vehicle's equipment and the country version, various settings for open‐ ing and closing are possible.

These settings are stored for the driver profile, refer to page 63, currently used.

Page 66

CONTROLS

Opening and closing

Unlocking

Doors

Via the Central Information Display (CID):

1. "My MINI"

2. "Vehicle settings"

3. "Doors/Key"

4. "Driver's door" or "All doors"

5. Select desired setting:

▷ "Driver's door only"

Only the driver's door is unlocked. Pressing again unlocks the entire vehi‐ cle.

▷ "All doors"

The entire vehicle is unlocked.

Tailgate

Via the Central Information Display (CID):

"My MINI"

2. "Vehicle settings"

3. "Doors/Key"

4. Select desired setting:

▷ "Tailgate"

Depending on your vehicle's optional features, the tailgate is either unlocked or opened.

▷ "Tailgate and door(s)"

Depending on your vehicle's optional features, the tailgate is either unlocked or opened and the doors unlocked.

Depending on optional features and country version, this setting is not offered in some cases.

3. Select driver profile.

The setting can be made for the driver

profile marked with this symbol.

4. "Last seat position automatic"

When the vehicle is unlocked, the driver's seat and exterior mirrors resume their last set posi‐ tions.

The most recent position is independent of the positions saved via the seat memory.

Automatic locking

Via the Central Information Display (CID):

"My MINI"

2. "Vehicle settings"

3. "Doors/Key"

4. Select desired setting:

▷ "Lock automatically"

The vehicle locks automatically after a short period of time if no door is opened after unlocking.

▷ "Lock after starting to drive"

The vehicle locks automatically after you drive off.

Automatic unlocking

Via the Central Information Display (CID):

"My MINI"

2. "Vehicle settings"

3. "Doors/Key"

4. "Unlock at end of trip"

After the engine is switched off by pressing the Start/Stop button, the locked vehicle is automatically unlocked.

Adjusting the last seat and mirror position

Via the Central Information Display (CID):

"My MINI"

2. "Driver profiles"

Online Edition for Part no. 01402983594 - X/17

Confirmation signals from the vehicle

Via the Central Information Display (CID):

"My MINI"

2. "Vehicle settings"

Page 67

Opening and closing

CONTROLS

3. "Doors/Key"

4. Deactivate or activate the desired confir‐

mation signals.

▷ "Flash for lock/unlock"

Unlocking is signaled by two flashes, locking by one.

▷ With alarm system:

"Acoustic signal for lock/unlock"

Unlocking is signaled by one honk of the horn.

Alarm system

General information

When the vehicle is locked, the vehicle alarm system reacts to the following changes:

▷ Unauthorized opening of a door, the hood

or the tailgate.

▷ Movements in the car's interior.

▷ Changes in the vehicle tilt, e. g., during at‐

tempts at stealing a wheel or when towing the vehicle.

▷ Disconnected battery voltage.

▷ Improper use of the socket for Onboard Di‐

agnosis.

The alarm system signals these changes visually and acoustically:

▷ Acoustic alarm.

Depending on local regulations, the acous‐ tic alarm may be suppressed.

▷ By switching on the hazard warning system.

▷ By flashing the daytime running lights.

Overview

Indicator light in the roof fin.

Indicator light on the interior mirror.

Switching on/off

When you unlock and lock the vehicle, either with the remote control or with Comfort Access, the alarm system is switched off and on at the same time.

Opening the doors with the alarm system switched on

The alarm system is triggered when a door is opened if the door was unlocked using the integrated key in the door lock.

Switching off the alarm, refer to page 68.

Opening the tailgate with the alarm system switched on

The tailgate can be opened even when the alarm system is switched on.

After the tailgate is closed, it is locked and monitored again provided the doors are

Online Edition for Part no. 01402983594 - X/17

Page 68

CONTROLS

Opening and closing

locked. The hazard warning system flashes once.

Panic mode

You can trigger the alarm system if you find yourself in a dangerous situation.

▷ Press button on the remote control

and hold for at least 3 seconds.

▷ Briefly press the button on the remote con‐

trol three times in succession.

To switch off the alarm: press any button.

Signals of the indicator lights

▷ The indicator light flashes briefly every

2 seconds:

The alarm system is switched on.

▷ Indicator light flashes for approx. 10 sec‐

onds, then it flashes briefly every 2 sec‐ onds:

Interior motion sensor and tilt alarm sensor are not active, as doors, hood, or tailgate are not correctly closed. Correctly closed access points are secured.

When the still open access points are closed, interior motion sensor and tilt alarm sensor will be switched on.

▷ The indicator light goes out after unlocking:

The vehicle has not been tampered with.

▷ The indicator light flashes after unlocking

until the engine ignition is switched on, but no longer than approx. 5 minutes:

An alarm has been triggered.

Tilt alarm sensor

The tilt of the vehicle is monitored.

The alarm system responds in situations such as attempts to steal a wheel or when the vehicle is towed.

Interior motion sensor

The windows and the glass sunroof must be closed for the system to function properly.

Avoiding unintentional alarms

General information

The tilt alarm sensor and interior motion sensor can trigger an alarm, although no unauthorized action occurred.

Possible situations for an unwanted alarm:

▷ In automatic vehicle washes.

▷ In duplex garages.

▷ During transport on trains carrying vehicles,

at sea or on a trailer.

▷ With animals in the vehicle.

▷ At the gas station: if the vehicle is locked af‐

ter refueling starts.

The tilt alarm sensor and the interior motion sensor can be switched off in such situations.

Switching off the tilt alarm sensor and interior motion sensor

Press the remote control button again within 10 seconds as soon as the vehi‐

cle is locked.

The indicator light lights up for approx. 2 sec‐ onds and then continues to flash.

The tilt alarm sensor and interior motion sensor are switched off until the vehicle is locked again.

Switching off the alarm

▷ Unlock the vehicle with the remote control

or switch on the ignition, if needed through emergency detection of remote control, re‐ fer to page 55.

▷ With Comfort Access: If you have the re‐

mote control with you, unlock the vehicle using the button on the driver's side or pas‐ senger side door.

Online Edition for Part no. 01402983594 - X/17

Page 69

Opening and closing

CONTROLS

Power windows

General information

If an accident of a certain severity occurs, the windows are automatically closed except a gap.

Safety information

WARNING

When operating the windows, body parts and objects can be jammed. There is a risk of injury or risk of damage to property. Make sure that the area of movement of the windows is clear during opening and closing.◀

Overview

Convenient opening via the remote control, re‐ fer to page 53.

Closing

▷

Convenient closing via the remote control, refer to page 53.

Closing via Comfort Access, refer to page 58.

Pull the switch to the resistance point.

The window closes while the switch is being held.

Pull the switch beyond the resistance

point.

The window closes automatically if the door is closed. Pulling the switch again stops the motion.

Jam protection system

General information

If closing force exceeds a specific threshold as a window closes, closing is interrupted.

The window opens slightly.

Power windows

Safety switch

Opening

▷

Press the switch to the resistance

point.

The window opens while the switch is being held.

Press the switch beyond the resist‐

ance point.

The window opens automatically. Pressing the switch again stops the motion.

Online Edition for Part no. 01402983594 - X/17

Safety information

WARNING

Accessories on the windows such as an‐ tennas can impact jam protection. There is a risk of injury. Do not install accessories in the area of movement of the windows.◀

Closing without the jam protection system

In case of danger from the outside or if ice might prevent normal closing, proceed as fol‐ lows:

1. Pull the switch past the resistance

point and hold it there.

Page 70

CONTROLS

Opening and closing

The window closes with limited jam protec‐ tion. If the closing force exceeds a specific threshold, closing is interrupted.

Pull the switch past the resistance point again within approx. 4 seconds and hold it there.

The window closes without jam protection.

Safety switch

General information

The safety switch in the driver's door can be used to prevent children, for instance from opening and closing the rear windows using the switches in the rear.

If an accident of a certain severity occurs, the safety function is switched off automatically.

Switching on/off

Press button.

The LED lights up if the safety function

is switched on.

Malfunction

Initializing the system

The system can be initialized when the vehicle is stationary and the engine is running.

During initialization, the affected window closes without jam protection.

WARNING

1. Open the affected window completely.

4. Release switch.

Pull the switch to the resistance point

and hold.

The window closes.

Continue holding the switch pulled to

the resistance point.

The window opens and closes once or twice after approx. 15 seconds, depending on the vehicle's equipment.

General information

In certain situations a window can only be op‐ erated to a limited extent.

▷ After a power failure during the opening or

closing process, the a window can only be operated to a limited extent. The system must be initialized in this case.

▷ The power window motors are equipped

with overheating protection. If a window is opened and closed several times within a short period of time, the overheating pro‐ tection switches the motor off temporarily. Depending on the degree of overheating, it may only be possible to close the window or it may not be possible to operate it at all.

In this case: allow the power window motor to cool down.

Online Edition for Part no. 01402983594 - X/17

Panoramic glass sun‐ roof

General information

In the event of a severe accident, the glass sun‐ roof is automatically closed.

Safety information

WARNING

Body parts can be jammed when operat‐ ing the glass sunroof. There is a risk of injury. Make sure that the area of movement of the glass sunroof is clear during opening and clos‐ ing.◀

Page 71

Opening and closing

CONTROLS

Overview

Tilting the glass sunroof

Press back the switch up to or beyond the resistance point and release it.

The glass sunroof is raised.

Opening glass sunroof

When the glass sunroof is closed

Press the switch back beyond the resistance point and release it twice.

The glass sunroof is opened.

Pressing the switch again stops

the motion.

Comfort position

In some models, the wind noises in the car's in‐ terior are lowest when the glass sunroof is not fully open. In these models, the automatic function initially only opens the glass sunroof up to this comfort position.

Pressing the switch again opens the glass sun‐ roof fully.

Closing glass sunroof

With the glass sunroof open

▷ Slide switch forward to the

resistance point and hold.

The glass sunroof is closed as long as the switch is pressed and stops in the raised posi‐ tion.

▷ Press the switch forward beyond the resist‐

ance point and release it.

The glass sunroof is closed and stops in the raised position.

Pressing the switch again stops the motion.

▷ Press the switch forward beyond the resist‐

ance point and release it twice.

The glass sunroof is closed.

Pressing the switch again stops the motion.

With the glass sunroof completely raised

▷ Slide switch back to the re‐

sistance point and hold.

The glass sunroof is opened as long as the switch is pressed.

▷ Press the switch back beyond the resist‐

ance point and release it.

The glass sunroof is opened.

Pressing the switch again stops the motion.

Online Edition for Part no. 01402983594 - X/17

With the glass sunroof completely raised

Press the switch forward beyond the resistance point and release it.

The glass sunroof is closed.

Jam protection system

General information

If the closing force exceeds a specific value as a glass sunroof closes, the closing action is inter‐ rupted.

Page 72

CONTROLS

The glass sunroof opens slightly.

Opening and closing

Closing without the jam protection system

If there is an external danger, proceed as fol‐ lows:

1. Push the switch forward past the resistance

point and hold it.

The glass sunroof closes with limited jam protection. If the closing force exceeds a specific threshold, closing is interrupted.

2. Push the switch forward again past the re‐

sistance point and hold until the glass sun‐ roof closes without jam protection. Make sure that the closing area is clear.

Initializing after a power interruption

After a power failure during the opening or closing process, the glass sunroof can only be operated to a limited extent. The system must be initialized in this case. MINI recommends having this work performed only by a dealer's service center or another qualified service cen‐ ter or repair shop.

Online Edition for Part no. 01402983594 - X/17

Page 73

Settings

CONTROLS

Vehicle features and op‐ tions

Sitting safely

An ideal seating position that meets the needs of the occupants can make a vital contribution to relaxed, fatigue-free driving.

In the event of an accident, the correct seating position plays an important role. Follow the in‐ formation in the following chapters:

▷ Seats, refer to page 73.

▷ Safety belts, refer to page 76.

▷ Head restraints, refer to page 78.

▷ Airbags, refer to page 136.

WARNING

With a backrest inclined too far to the rear, the efficacy of safety gear, including safety belts can no longer be ensured. There is a risk of sliding under the safety belt in an accident. There is a risk of injuries or danger to life. Ad‐ just the seat prior to starting the trip. Adjust the backrest so that it is in the most upright posi‐ tion as possible and do not adjust again while driving.◀

WARNING

There is a risk of jamming when moving the seats. There is a risk of injury or risk of dam‐ age to property. Make sure that the area of movement of the seat is clear prior to any ad‐ justment.◀

Manually adjustable seats

Overview

Front seats

Safety information

WARNING

Seat adjustments while driving can lead to unexpected movements of the seat. Vehicle control could be lost. There is a risk of an acci‐ dent. Only adjust the seat on the driver's side when the vehicle is stationary.◀

Online Edition for Part no. 01402983594 - X/17

1 Forward/backward

2 Thigh support

3 Height

4 Backrest tilt

Page 74

CONTROLS

Settings

Forward/backward

Pull the lever and slide the seat in the desired direction.

After releasing the lever, move the seat forward or back slightly making sure it engages prop‐ erly.

Height

Pull the lever up or press it down as often as needed to reach the desired height.

Lumbar support

The curvature of the seat backrest can be ad‐ justed in a way that it supports the lumbar re‐ gion of the spine. The lower back and the spine are supported for upright posture.

Turn the wheel in order to increase or decrease the curvature.

Electrically adjustable seats

General information

The seat setting for the driver's seat is stored for the profile currently used. When the vehicle is unlocked via the remote control, the position is automatically retrieved if the function, refer to page 66, is activated for this purpose.

The current seat position can be stored using the memory function, refer to page 80.

Overview

Backrest tilt

Pull the lever and apply your weight to the backrest or lift it off, as necessary.

Online Edition for Part no. 01402983594 - X/17

1 Memory function

2 Lumbar support

3 Backrest tilt

4 Forward/backward, height, seat tilt

Page 75

Settings

CONTROLS

Forward/backward

Push switch forward or backward.

Height

Push switch up or down.

Seat tilt

Backrest tilt

Move switch forward or backward.

Lumbar support

Concept

The curvature of the seat backrest can be ad‐ justed in a way that it supports the lumbar re‐ gion of the spine. The lower back and the spine are supported for upright posture.

Settings

▷ Press the front/rear section

of the button:

The curvature is increased/ decreased.

▷ Press the upper/lower sec‐

tion of the button:

The curvature is shifted up/ down.

Move switch up or down.

Thigh support

Pull the lever at the front of the seat and adjust the thigh support.

Online Edition for Part no. 01402983594 - X/17

Page 76

CONTROLS

Settings

Front seat heating

Overview

Seat heating

Switching on

Press button once for each tempera‐ ture level.

The maximum temperature is reached when three LEDs are lit.

If the trip is continued within approx. 15 mi‐ nutes after a stop, seat heating is activated au‐ tomatically with the temperature selected last.

When GREEN Mode is activated, refer to page 213, the heater output is reduced.

Switching off

Press and hold the button, until the LEDs go out.

Rear seats

Safety information

WARNING

There is a risk of jamming when folding down the center armrest in the rear. There is a risk of injury. Make sure that the area of move‐ ment of the center armrest is clear during fold‐ ing down.◀

WARNING

Unexpected movements of the backrest while driving may occur due to unintentional unlocking of the rear backrests by the straps. There is a risk of injury. Do not fasten any ob‐ jects to the straps for unlocking the rear back‐ rests.◀

Backrest tilt

Pull the strap and apply your weight to the backrest or lift it off, as necessary.

Safety belts

Number of safety belts and safety belt buckles

The vehicle is fitted with five safety belts to en‐ sure occupant safety. However, they can only offer protection when adjusted correctly.

The two outer safety belt buckles of the rear seat are intended for the persons sitting on the left and right.

The center safety belt buckle of the rear seat is intended for the person sitting in the middle.

General information

Always make sure that safety belts are being worn by all occupants before driving off. Al‐ though airbags enhance safety by providing added protection, they are not a substitute for safety belts.

If needed, disengage the safety belt in the rear from the belt buckle on the side.

Online Edition for Part no. 01402983594 - X/17

Page 77

Settings

CONTROLS

The upper shoulder strap's anchorage point will be correct for adult seat occupants of every build if the seat is correctly adjusted.

Safety information

WARNING

Use of a safety belt to buckle more than one person will potentially defeat the ability of the safety belt to serve its protective func‐ tion.There is a risk of injuries or danger to life. Do not allow more than one person to wear a single safety belt. Infants and children are not allowed on an occupant's lap, but must be transported and secured in designated child re‐ straint systems.◀

WARNING

The efficacy of safety gear, including safety belts, can be limited or lost when safety belts are fastened incorrectly. An incorrectly fastened safety belt can cause additional inju‐ ries, for instance in the event of an accident or during braking and evasive maneuvers. There is a risk of injuries or danger to life. Make sure that all occupants are wearing safety belts cor‐ rectly.◀

Correct use of safety belts

▷ Wear the safety belt twist-free and tight to

your body over your lap and shoulders.

▷ Wear the safety belt deep on your hips over

your lap. The safety belt may not press on your stomach.

▷ Do not rub the safety belt against sharp

edges, or guide it or jam it in across hard or fragile objects.

▷ Avoid thick clothing.

▷ Re-tighten the safety belt frequently up‐

ward around your upper body.

Buckling the safety belt

Slowly guide the safety belt out of the

holder when fastening it.

2. Insert the tongue plate into the safety belt

buckle. The safety belt buckle must engage audibly.

WARNING

The efficacy of safety gear, including safety belts, may not be fully functional or fail in the following situations:

▷ The safety belts or safety belt buckles are

damaged, soiled, or changed in any other way.

▷ Belt tensioners or belt retractors were

modified.

Safety belts can be imperceptibly damaged in the event of an accident. There is a risk of inju‐ ries or danger to life. Do not modify safety belts, safety belt buckles, belt tensioners, belt retractors or belt anchors and keep them clean. Have the safety belts checked after an accident at the dealer’s service center or another quali‐ fied service center or repair shop.◀

Online Edition for Part no. 01402983594 - X/17

Unbuckling the safety belt

Hold the safety belt firmly.

2. Press the red button in the belt buckle.

3. Guide the safety belt back into its roll-up

mechanism.

Page 78

CONTROLS

Settings

Middle safety belt in the rear

Buckling the safety belt

1. Pull the buckle tongues out of the mounts

in the roof.

2. Insert the lower buckle tongue in the belt

buckle, arrow 1.

3. Insert the upper buckle tongue in the belt

buckle, arrow 2.

Safety belt buckles must audibly click into place.

Unbuckling the safety belt

Hold the safety belt firmly.

2. Press the red button in the belt buckle.

3. Use the buckle tongue, arrow 1, to open

the second safety belt buckle, arrow 2.

Safety belt reminder for driver's seat and front passenger seat

Display in the instrument cluster

The indicator light lights up and a signal sounds. Make sure that the safety belts

are positioned correctly. The safety belt reminder can also be activated if objects are placed on the front passenger seat.

Front head restraints

Safety information

WARNING

A missing protective effect due to re‐ moved or not correctly adjusted head restraints can cause injuries in the head and neck area. There is a risk of injury.

▷ Before driving, install the removed head re‐

straints on the occupied seats.

▷ Adjust the head restraint so its center sup‐

ports the back of the head at as close to eye level as possible.

▷ Adjust the distance so that the head re‐

straint is as close as possible to the back of the head. Adjust the distance via the back‐ rest tilt as needed.◀

WARNING

Body parts can be jammed when moving the head restraint. There is a risk of injury. Make sure that the area of movement is clear when moving the head restraint.◀

4. Guide the safety belt to the mount in the

roofliner.

Online Edition for Part no. 01402983594 - X/17

WARNING

Objects on the head restraint reduce the protective effect in the head and neck area. There is a risk of injury.

▷ Do not use seat or head restraint covers.

▷ Do not hang objects, for instance clothes

hangers, directly on the head restraint.

Page 79

▷ Only use accessories that have been deter‐

mined to be safe for attachment to a head restraint.

▷ Do not use any accessories, for instance pil‐

lows, while driving.◀

Adjusting the height: John Cooper Works sport seat

The height of the head restraints cannot be ad‐ justed.

Adjusting the height

Settings

Fold the seat backrest forward if needed.

2. Pull head restraint up as far as possible.

3. Press the button, arrow 1, and pull the

head restraint out completely.

CONTROLS

Installing

Proceed in the reverse order to install the head restraint.

Rear head restraints

▷ To lower: press the button, arrow 1, and

push the head restraint down.

▷ To raise: push the head restraint up.

After setting the height, move the head re‐ straint up or down slightly, making sure it en‐ gages properly.

Removing: John Cooper Works sport seat

The head restraints cannot be removed.

Removing

Only remove the head restraint if no one will be sitting in the seat in question.

Online Edition for Part no. 01402983594 - X/17

Safety information

WARNING

A missing protective effect due to re‐ moved or not correctly adjusted head restraints can cause injuries in the head and neck area. There is a risk of injury.

▷ Before driving, install the removed head re‐

straints on the occupied seats.

▷ Adjust the head restraint so its center sup‐

ports the back of the head at as close to eye level as possible.

▷ Adjust the distance so that the head re‐

straint is as close as possible to the back of the head. Adjust the distance via the back‐ rest tilt as needed.◀

WARNING

Body parts can be jammed when moving the head restraint. There is a risk of injury. Make sure that the area of movement is clear when moving the head restraint.◀

Page 80

CONTROLS

Settings

WARNING

Objects on the head restraint reduce the protective effect in the head and neck area. There is a risk of injury.

▷ Do not use seat or head restraint covers.

▷ Do not hang objects, for instance clothes

hangers, directly on the head restraint.

▷ Only use accessories that have been deter‐

mined to be safe for attachment to a head restraint.

▷ Do not use any accessories, for instance pil‐

lows, while driving.◀

Adjusting the height

▷ To lower: press the button, arrow 1, and

push the head restraint down.

▷ To raise: push the head restraint up.

After setting the height, move the head re‐ straint up or down slightly, making sure it en‐ gages properly.

▷ Forward: fold the head restraint toward the

front as far as it will go. Make sure that the head restraint engages correctly.

Removing

Only remove the head restraint if no one will be sitting in the seat in question.

1. Fold down the rear seat backrest, refer to

page 198, in question.

2. Pull head restraint up against the resist‐

ance.

3. Press the button, arrow 1, and pull the

head restraint out completely.

Installing

Proceed in the reverse order to install the head restraint.

Memory function

Fold down

▷ To fold down: press the button, arrow 1,

and press down the head restraint, arrow 2.

Online Edition for Part no. 01402983594 - X/17

Concept

The following settings can be stored and, if necessary, retrieved using the memory func‐ tion:

▷ Seat position.

▷ Exterior mirror position.

▷ Height of the Head-up Display.

General information

Different settings can be assigned to two mem‐ ory locations.

Page 81

Settings

CONTROLS

The adjustment of the lumbar support is not stored.

Safety information

WARNING

There is a risk of jamming when moving the seats. There is a risk of injury or risk of dam‐ age to property. Make sure that the area of movement of the seat is clear prior to any ad‐ justment.◀

WARNING

Using the memory function while driving can lead to unexpected movements of the seat. Vehicle control could be lost. There is a risk of an accident. Only retrieve the memory function when the vehicle is stationary.◀

Overview

Storing

Switch on the ignition.

2. Set the desired position.

4. Press selected button 1 or 2 while the LED

Press button. The LED in the button

lights up.

is lit. The LED goes out.

Calling up settings

The stored position is called up automatically.

Press selected button 1 or 2.

The procedure stops when a switch for setting the seat or one of the memory buttons is pressed.

While driving, the seat position adjustment on the driver's side is interrupted after a short time.

Calling up of a seat position deactivated

After a brief period, calling up stored seat posi‐ tions is deactivated to save battery power.

To reactivate calling up of a seat position:

▷ Open or close the door or tailgate.

▷ Press a button on the remote control.

▷ Press the Start/Stop button.

Mirrors

Exterior mirrors

General information

The mirror on the front passenger side is more curved than the driver's side mirror.

The mirror setting is stored for the driver profile currently in use. When the vehicle is unlocked via the remote control, the position is automat‐ ically retrieved if the function, refer to page 66, is activated for this purpose.

The current exterior mirror position can be stored using the memory function, refer to page 80.

Safety information

WARNING

Objects reflected in the mirror are closer than they appear. The distance to the traffic behind could be incorrectly estimated, for in‐ stance while changing lanes. There is a risk of an accident. Estimate the distance to the traffic behind by looking over your shoulder.◀

Online Edition for Part no. 01402983594 - X/17

Page 82

CONTROLS

Settings

Overview

1 Settings

2 Selecting a mirror, Automatic Curb Monitor

3 Folding in and out

Selecting a mirror

To change over to the other mirror:

Slide the switch.

Adjusting electrically

Press button.

The mirror movement follows the but‐ ton movement.

▷ In vehicle washes.

▷ On narrow roads.

Mirrors that were folded in are folded out auto‐ matically at a speed of approx. 25 mph/40 km/h.

Automatic heating

Both exterior mirrors are automatically heated whenever the ignition is switched on.

Automatic dimming feature

The exterior mirror on the driver's side is auto‐ matically dimmed. Photocells in the car's inte‐ rior mirror, refer to page 83, are used to con‐ trol this.

Automatic Curb Monitor, exterior mirror

Concept

If reverse gear is engaged, the mirror glass on the front passenger side is tilted downward. This improves your view of the curb and other low-lying obstacles when parking, for instance.

Activating

Malfunction

In case of an electrical malfunction, adjust the mirror by pressing the edges of the mirror glass.

Folding in and out

NOTE

Depending on the vehicle width, the ve‐ hicle can be damaged in vehicle washes. There is a risk of damage to property. Before washing, fold in the mirrors by hand or with the button.◀

Press button.

Folding is only possible up to a speed of ap‐ prox. 15 mph/20 km/h.

Folding the mirrors in and out is helpful in the following situations:

Online Edition for Part no. 01402983594 - X/17

1. Slide the switch to the driver's side

mirror position.

2. Engage selector lever position R.

Deactivating

Slide the switch to the passenger's side mirror position.

Page 83

Settings

CONTROLS

Interior mirror, manually dimmable

Flip lever

To reduce the blinding effect of the interior mirror, flip the lever forward.

Turn knob

▷ In the mirror glass.

▷ On the back of the mirror.

Functional requirements

▷ Keep the photocells clean.

▷ Do not cover the area between the interior

mirror and the windshield.

Steering wheel

Safety information

WARNING

Steering wheel adjustments while driving can lead to unexpected steering wheel move‐ ments. Vehicle control could be lost. There is a risk of an accident. Adjust the steering wheel while the vehicle is stationary only.◀

Settings

Turn the knob to reduce the blinding effect by the interior mirror.

Interior mirror, automatic dimming feature

Overview

Photocells are used for control:

Online Edition for Part no. 01402983594 - X/17

Fold the lever down.

2. Move the steering wheel to the preferred

height and angle to suit your seating posi‐ tion.

3. Fold the lever back up.

Page 84

CONTROLS

Transporting children safely

Vehicle features and op‐ tions

This chapter describes all standard, countryspecific and optional features offered with the series. It also describes features that are not

The right place for children

Safety information

WARNING

Unattended children or animals can cause the vehicle to move and endanger them‐ selves and traffic, for instance due to the fol‐ lowing actions:

▷ Pressing the Start/Stop button.

▷ Releasing the parking brake.

▷ Opening and closing the doors or windows.

▷ Engaging selector lever position N.

▷ Using vehicle equipment.

There is a risk of accidents or injuries. Do not leave children or animals unattended in the ve‐ hicle. Take the remote control with you when exiting and lock the vehicle.◀

system can no longer be used due to their age, weight, and size.

Safety information

WARNING

The safety belt cannot be fastened cor‐ rectly on children shorter than 5 ft, 150 cm without suitable additional child restraint sys‐ tems. The efficacy of safety gear, including safety belts, can be limited or lost when safety belts are fastened incorrectly. An incorrectly fastened safety belt can cause additional inju‐ ries, for instance in the event of an accident or during braking and evasive maneuvers. There is a risk of injuries or danger to life. Secure chil‐ dren shorter than 5 ft, 150 cm using suitable child restraint systems.◀

Always transport children in the rear seat

General information

Accident research shows that the safest place for children is in the rear seat.

Transport children younger than 13 years of age or shorter than 5 ft/150 cm only in the rear seat in suitable child restraint systems designed for the age, weight and size of the child. Chil‐ dren 13 years of age or older must wear a safety belt as soon as a suitable child restraint

Online Edition for Part no. 01402983594 - X/17

Children on the front passenger seat

General information

Before using a child restraint system on the front passenger seat, ensure that the front, knee, and side airbags on the front passenger side are deactivated. Automatic deactivation of front-seat passenger airbags, refer to page 138.

Page 85

Transporting children safely

CONTROLS

Safety information

WARNING

Active front-seat passenger airbags can injure a child in a child restraint system when the airbags are activated. There is a risk of in‐ jury. Make sure that the front-seat passenger airbags are deactivated and that the PASSEN‐ GER AIRBAG OFF indicator light lights up.◀

WARNING

The stability of the child restraint system is limited or compromised with incorrect seat adjustment or improper installation of the child seat. There is a risk of injuries or danger to life. Make sure that the child restraint system fits securely against the backrest. If possible, adjust the backrest tilt for all affected backrests and correctly adjust the seats. Make sure that seats and backrests are securely engaged or locked. If possible, adjust the height of the head re‐ straints or remove them.◀

Installing child re‐ straint systems

General information

Pay attention to the specifications of the child restraint system manufacturer when selecting, installing, and using child restraint systems.

Safety information

WARNING

The protective effect of damaged child restraint systems or of child restraint systems exposed to an accident and their fastening sys‐ tems can be limited or lost. A child can e.g.,not sufficiently restrained, for instance in the event of an accident or braking and evasive maneu‐ vers. There is a risk of injuries or danger to life. Have damaged child restraint systems or of child restraint systems exposed to an accident and their fastening systems checked and possi‐

bly replaced by the dealer’s service center or another qualified service center or repair shop.◀

WARNING

On the front passenger seat

Deactivating airbags

WARNING

After installing a child restraint system in the front passenger seat, make sure that the front, knee and side airbags on the front passenger side are deactivated.

Deactivate the front-seat passenger airbags au‐ tomatically, refer to page 138.

Seat position and height

Before installing a child restraint system, move the front passenger seat as far back as possible and adjust its height to the highest and thus best possible position for the belt and to offer optimal protection in the event of an accident.

If the upper anchorage of the safety belt is lo‐ cated in front of the belt guide of the child seat, move the front passenger seat carefully for‐

Online Edition for Part no. 01402983594 - X/17

Page 86

CONTROLS

Transporting children safely

ward until the best possible belt guide position is reached.

Child seat security

Locking the safety belt

1. Pull out the belt strap completely.

2. Secure the child restraint system with the

safety belt.

3. Allow the belt strap to be pulled in and pull

it tight against the child restraint system. The safety belt is locked.

Unlocking the safety belt

1. Unbuckle the safety belt buckle.

2. Remove the child restraint system.

3. Allow the belt strap to be pulled in com‐

The rear safety belts and the front passenger safety belt can be permanently locked to fasten child restraint systems.

pletely.

In some cases it may be necessary to separate the lower belt attachment. Safety belts, refer to page 76.

LATCH child restraint fixing system

General information

LATCH: Lower Anchors and Tether for Children.

Pay attention to the operating and safety infor‐ mation of the child restraint system manufac‐ turer when installing and using LATCH child re‐ straint fixing systems.

Mounts for the lower LATCH anchors

The lower anchors may be used to attach the CRS to the vehicle seat up to a combined child and CRS weight of 65 lb/30 kg when the child is restrained by the internal harnesses.

Safety information

WARNING

If the LATCH child restraint fixing systems are not correctly engaged, the protective effect of the LATCH child restraint fixing system can be limited. There is a risk of injuries or danger to life. Make sure that the lower anchors are se‐ curely engaged and that the LATCH child re‐ straint fixing system fits securely against the backrest.◀

Position

Symbol Meaning

Before installing LATCH child restraint fixing systems

Pull the safety belt away from the area of the child restraint system.

The corresponding symbol shows the mounts for the lower LATCH anchors.

Seats equipped with lower an‐ chors are marked with a pair, 2, of LATCH symbols.

For vehicles equipped with a middle seat:

It is not recommended to use the inner lower anchors of standard outer LATCH posi‐ tions to fasten a child restraint system on the middle seat. Use the vehicle safety belt instead for the middle seat.

Online Edition for Part no. 01402983594 - X/17

Page 87

Transporting children safely

CONTROLS

Assembly of LATCH child restraint fixing systems

1. Install child restraint system, see manufac‐

turer's information.

2. Ensure that both LATCH anchors are prop‐

erly connected.

Child restraint systems with tether strap

Safety information

WARNING

If the upper retaining strap is incorrectly used for the child restraint system, the protec‐ tive effect can be reduced. There is a risk of in‐ jury. Make sure that the upper retaining strap is not guided across sharp edges and without twisting to the upper retaining strap.◀

WARNING

If the rear backrest is not locked, the pro‐ tective effect of the child restraint system is lim‐ ited or there is none. In particular situations, for instance braking maneuvers or in case of an ac‐ cident, the rear backrest can fold forward. There is a risk of injuries or danger to life. Make sure that the rear backrests are locked.◀

NOTE

The anchors for the upper retaining straps of child restraint systems are only provided for these retaining straps. When other objects are mounted, the anchors can be damaged. There is a risk of damage to property. Only mount child restraint systems to the upper retaining straps.◀

Routing the retaining strap

1 Direction of travel

2 Head restraint

3 Hook for upper retaining strap

4 Anchor

5 Seat backrest

6 Upper retaining strap

Attaching the upper retaining strap to the anchor

Raise the head restraint, if needed.

2. On the rear seat: Guide the upper retaining

strap between the supports of the head re‐ straint.

3. Attach the hook of the retaining strap to

the anchor on the rear seat.

4. Tighten the retaining strap by pulling it

down.

Anchors

The respective symbol shows the an‐ chor for the upper retaining strap. Seats

with an upper top tether are marked with this symbol. It can be found on the rear seat backrest or the rear window shelf.

Online Edition for Part no. 01402983594 - X/17

Page 88

CONTROLS

Transporting children safely

Locking the doors and windows

Doors

Push the locking lever on the rear doors up.

The door can now be opened from the outside only.

Safety switch for the rear

Press button on the driver's door if children are being transported in the

rear.

This locks various functions so that they cannot be operated from the rear: safety switch, refer to page 70.

Online Edition for Part no. 01402983594 - X/17

Page 89

Driving

CONTROLS

Vehicle features and op‐ tions

Start/Stop button, driveready state

Concept

The following ready states can be attained by pressing the Start/ Stop button:

▷ Radio-ready state on/off.

▷ Ignition on/off.

▷ Activating/deactivating drive-ready state.

To activate drive-ready state, press the brake pedal.

The drive-ready state cannot be activated as long as the charging cable, refer to page 219, is connected.

Switching radio-ready state on/off

The radio-ready state is activated by pressing the Start/Stop button in the following situa‐ tions:

▷ When the engine is running.

▷ When drive-ready state is activated.

▷ When the engine is switched off automati‐

cally using the Auto Start/Stop function.

Some electronic systems/power consumers re‐ main ready for operation.

Radio-ready state is switched off automatically:

▷ If the driver's or front passenger door is

opened when exiting the vehicle, with drive-ready state switched off manually.

▷ If the ignition is switched off manually with

the Start/Stop button.

▷ After approx. 8 minutes.

▷ When the vehicle is locked using the central

locking system.

▷ Shortly before the battery is discharged

completely, so that the engine can still be started.

If the engine is switched off and the ignition is switched on, the system automatically switches to the radio-ready state if the lights are switched off or, if correspondingly equipped, the daytime running lights are switched on.

Ignition on

Press the Start/Stop button, and do not press on the brake pedal at the same time.

All vehicle systems are ready for operation.

Most of the indicator/warning lights in the in‐ strument cluster light up for a varied length of time.

To save battery power when the engine is off, switch off the ignition and any unnecessary electronic systems/power consumers.

Ignition off

Press the Start/Stop button again without step‐ ping on the brake.

All indicator lights in the instrument cluster go out.

To save battery power when the engine is off, switch off the ignition and any unnecessary electronic systems/power consumers.

Online Edition for Part no. 01402983594 - X/17

Page 90

CONTROLS

Driving

Safety measures

The ignition is switched off automatically in the following situations while the vehicle is station‐ ary and the engine is off:

▷ When locking the vehicle, and when the

low beams are switched on.

▷ Shortly before the battery is discharged

completely, so that the engine can still be started. This function is only available when the low beams are switched off.

▷ When opening or closing the driver door, if

the driver's safety belt is unbuckled and the low beams are switched off.

▷ While the driver's safety belt is unbuckled

with driver's door open and low beams off.

▷ When the front doors are opened if there is

no other person sitting in the front seats.

The low beams switch to parking lights after approx. 10 minutes of no use.

When the ignition is switched off automatically by opening or closing the driver's door, un‐ buckling the driver's safety belt or by the auto‐ matic switching of the low beams to parking lights, the radio-ready state remains active.

The vehicle is powered by the electric mo‐ tor.

▷ Starting the combustion engine, refer to

page 91.

The vehicle is powered by the combustion engine.

Safety information

DANGER

If the exhaust pipe is blocked or ventila‐ tion is insufficient, harmful exhaust gases can enter into the vehicle. The exhaust gases con‐ tain pollutants which are colorless and odorless. In enclosed areas, exhaust gases can also accu‐ mulate outside of the vehicle. There is danger to life. Keep the exhaust pipe free and ensure sufficient ventilation.◀

WARNING

When driving in electric mode, pedes‐ trians and other traffic might pay less attention to the vehicle due to the lack of engine noise. There is a risk of an accident. Adjust driving style to traffic conditions. Watch traffic closely and actively intervene where appropriate.◀

Drive-ready state

When drive-ready state is activated, the vehicle is operational. Activated drive-ready state is the equivalent of a running engine in conventional vehicles. Deactivated drive-ready state is equiv‐ alent to switching the ignition off.

Drive-ready state in de‐ tail

Concept

The following are the different drive-ready state variants:

▷ Electric drive-ready state, refer to

page 91.

Online Edition for Part no. 01402983594 - X/17

WARNING

An unsecured vehicle can begin to move and possibly roll away. There is a risk of an acci‐ dent. Before exiting, secure the vehicle against rolling.

In order to ensure that the vehicle is secured against rolling away, follow the following:

▷ Set the parking brake.

▷ On uphill grades or on a downhill slope,

turn the front wheels in the direction of the curb.

▷ On uphill grades or on a downhill slope,

also secure the vehicle, for instance with a wheel chock.◀

Page 91

Driving

CONTROLS

WARNING

Unattended children or animals can cause the vehicle to move and endanger them‐ selves and traffic, for instance due to the fol‐ lowing actions:

▷ Pressing the Start/Stop button.

▷ Releasing the parking brake.

▷ Opening and closing the doors or windows.

▷ Engaging selector lever position N.

▷ Using vehicle equipment.

There is a risk of accidents or injuries. Do not leave children or animals unattended in the ve‐ hicle. Take the remote control with you when exiting and lock the vehicle.◀

Activating drive-ready state

Close the driver's door.

2. Depress the brake pedal.

3. Press the Start/Stop button.

Depending on the prerequisite, the electric drive-ready state is possible or the engine can be started.

Electric drive-ready state

General information

The vehicle is ready for driving without starting the combustion engine.

Functional requirement

The electric drive-ready state is possible, if the prerequisites for electric driving, refer to page 93, are fulfilled.

Combustion engine start

Functional requirements

The combustion engine is started with activa‐ tion of the drive-ready state, refer to page 91, under the following conditions:

▷ The temperature of the hybrid system is too

high or too low.

▷ The high-voltage battery has an insufficient

charge.

Driving away

Activate drive-ready state.

2. Engage selector lever position D, M/S or R.

3. Release the parking brake.

4. Drive away.

Deactivating drive-ready state

After stopping the vehicle:

Set the parking brake.

2. Engage selector lever position P.

3. Press the Start/Stop button.

After parking the vehicle, you may hear noises due to operation of the hybrid system, such as for cooling of the high-voltage battery.

Safety measure

The drive-ready state is deactivated automati‐ cally after approx. 10 minutes when the vehicle is stationary if, with the selector lever in posi‐ tion P or N, the driver's door has been opened and neither the brake pedal nor the accelerator pedal have been depressed.

Display

READY indicates drive-ready state.

Online Edition for Part no. 01402983594 - X/17

Before driving into a vehicle wash

So that the vehicle can roll into a vehicle wash, follow instructions for going into an automatic vehicle wash, refer to page 272.

Page 92

CONTROLS

Driving

Auto Start/Stop function

Concept

The Auto Start/Stop function helps save fuel. The system switches off the combustion engine when conditions for electric driving have been met. The ignition or drive-ready state remains switched on.

General information

READY is displayed in the instrument cluster. If necessary, the combustion engine starts auto‐ matically.

The combustion engine is also stopped during the trip when rolling without acceleration or braking. This driving condition, in which the ve‐ hicle is traveling without power and energy re‐ covery is not active, is referred to as coasting, refer to page 94.

The combustion engine is not switched off au‐ tomatically in the following situations:

▷ The combustion engine is not at operating

temperature.

▷ The transmission selector lever is in position

M/S.

▷ High-voltage battery is heavily discharged

or vehicle electrical system is heavily bur‐ dened.

▷ High stress of the automatic climate control

in the heating or cooling phase.

▷ The hood is unlocked.

▷ The vehicle is being optimized for the cur‐

rent driving style, for instance during the break-in period or after a service appoint‐ ment.

▷ The hybrid system is malfunctioning.

Safety mode

An automatically stopped combustion engine does not start independently:

▷ When the driver's door is open and neither

the brake nor accelerator pedal are de‐ pressed.

▷ When the hood is unlocked.

The indicator lights come on. The combustion engine can only be started via the Start/Stop button.

Switching off the vehicle during an automatic engine stop

During an automatic engine stop, the vehicle can be switched off permanently, for instance when leaving it.

Press the Start/Stop button.

▷ The ignition is switched off.

▷ The radio-ready state is activated.

▷ The Auto Start/Stop function is deacti‐

vated.

▷ Engage selector lever position P.

2. Set the parking brake.

Malfunction

The Auto Start/Stop function no longer switches off the combustion engine automatically in the event of a malfunction. A message is displayed. It is possible to continue driving. Have the sys‐ tem checked.

Electric driving: ePOWER.

General information

In ePOWER, the vehicle is driven exclusively electrically. ePOWER works automatically.

Depending on the charge state of the highvoltage battery, maximum speed and range achieved can vary.

For electrical driving, certain conditions, refer to page 93, must be satisfied.

Displays of the hybrid system, refer to page 111.

Online Edition for Part no. 01402983594 - X/17

Page 93

Driving

CONTROLS

Safety information

WARNING

Functional requirements

▷ State of charge and temperature of the

high-voltage battery is sufficient.

▷ Selector lever position D or R engaged.

▷ The accelerator pedal is only slightly de‐

pressed.

▷ The possible maximum speed for electric

driving is not exceeded.

▷ The driver's door is closed.

▷ MID or GREEN driving mode is selected.

eDRIVE button

General information

Using the eDRIVE button, the characteristics of the hybrid system can be adjusted.

▷ MAX eDrive, refer to page 93

▷ Auto eDRIVE, refer to page 93

▷ SAVE BATTERY, refer to page 94

To switch between the individual function modes, press the eDRIVE button up or down.

Overview

eDRIVE button

Auto eDRIVE

General information

Auto eDRIVE is activated by default when the vehicle is started via the Start/Stop button.

In Auto eDRIVE, the vehicle is driven in hybrid mode corresponding to the various driving sit‐ uations, i.e. the drive combines combustion en‐ gine and electric motor. The respectively most effective drive type is preferred.

MAX eDRIVE

General information

The vehicle is driven exclusively electrically.

If necessary, the maximum electrical speed that applies to MAX eDRIVE may be deliberately ex‐ ceeded with the aid of kickdown, refer to page 107. The combustion engine is automati‐ cally started and the system switches to AUTO eDRIVE mode. Automatic starting of the engine while driving, refer to page 94.

Activating MAX eDRIVE

Press the button up repeatedly, until MAX eDRIVE is displayed in the instru‐

ment cluster.

When pressing the button, the current eDRIVE setting is graphically displayed on the Control Display.

Online Edition for Part no. 01402983594 - X/17

Page 94

CONTROLS

Driving

SAVE BATTERY

General information

The current charge state of the high-voltage battery can be maintained or increased with SAVE BATTERY. The electric range can be conserved in this

way for a later point in the trip, for instance.

This charging process increases the average fuel consumption.

The acceleration boost by the electric motor may be restricted.

The function is only available if sufficient fuel is available and in selector lever position D.

Activating SAVE BATTERY

Press the button down repeatedly, un‐ til SAVE with the battery symbol is dis‐

played in the instrument cluster.

When pressing the button, the current eDRIVE setting is graphically displayed on the Control Display.

Auto Start/Stop function, coasting

After coasting, the combustion or electric mo‐ tor restarts depending on the operating state.

Acoustic pedestrian protection

Concept

Depending on the country-specific version, the system generates a continuous driving noise at standstill with the drive-ready state activated and during electric driving up to approx. 20 mph/30 km/h.

A speaker system broadcasts the noise to the surroundings.

As a result, other traffic participants, for in‐ stance pedestrians or cyclists, can better per‐ ceive the vehicle.

Driving with the combus‐ tion engine: POWER

Concept

The combustion engine provides the main drive power to move the vehicle. If necessary, the high-voltage battery is charged at the same time.

Concept

The combustion engine is automatically stop‐ ped and disengaged from the drivetrain. This driving condition of rolling is referred to as coasting.

Functional requirements

Coasting is possible:

▷ The high-voltage battery is sufficiently

charged.

▷ Transmission position D is engaged.

▷ The drive system is at operating tempera‐

ture.

▷ GREEN Mode: when coasting, without oper‐

ating the brake, at speeds below 100 mph, approx. 160 km/h.

Online Edition for Part no. 01402983594 - X/17

Functional requirements

Automatic starting while driving

The combustion engine is automatically started under the following conditions while driving:

▷ During intense accelerations or on uphill

grades.

▷ By pressing the accelerator pedal beyond

the resistance point at the full throttle posi‐ tion, kickdown.

▷ The high-voltage battery has an insufficient

charge.

▷ Selector lever position M/S is engaged.

▷ The speed for electric driving is exceeded

while accelerating.

Page 95

Driving

CONTROLS

▷ Adapting to the course of the road when

destination guidance is activated.

▷ System-related requirement for hybrid

components.

Automatic switching off while driving

When reducing speed, the combustion engine is switched off when the conditions for electric driving, refer to page 93, are met.

Assistance from the elec‐ tric motor

Concept

The combustion engine provides the main drive power to move the vehicle.

The electric motor provides assistance as needed with additional propulsive power.

eASSIST

During normal vehicle operation, the electric motor assists the combustion engine, depend‐ ing on the situation. This assistance reduces fuel consumption.

eBOOST

Accelerating quickly, such as when passing, re‐ quires the maximum available power from the electric motor. To do this, apply extra force to the accelerator pedal.

Energy recovery: CHARGE

Concept

The hybrid system makes it possible to convert kinetic energy into electrical energy during braking and coasting. This recovered energy charges the high-voltage battery. If necessary, this stored electrical energy is output to the electric motor.

General information

Depending on the setting of the MINI Driving Modes switch, the high-voltage battery is charged at different speeds and the vehicle is decelerated differently while coasting.

Functional requirements

Conditions such as the following must be met to recover kinetic energy:

▷ The vehicle is moving.

▷ Selector lever position D, M/S is set.

▷ The high-voltage battery is not fully

charged.

Displays in the instrument cluster

Energy recovery displays in the instrument clus‐ ter, refer to page 111.

Parking brake

Concept

The parking brake is used to prevent the vehi‐ cle from rolling when it is parked.

Safety information

WARNING

An unsecured vehicle can begin to move and possibly roll away. There is a risk of an acci‐ dent. Before exiting, secure the vehicle against rolling.

In order to ensure that the vehicle is secured against rolling away, follow the following:

▷ Set the parking brake.

▷ On uphill grades or on a downhill slope,

turn the front wheels in the direction of the curb.

▷ On uphill grades or on a downhill slope,

also secure the vehicle, for instance with a wheel chock.◀

Online Edition for Part no. 01402983594 - X/17

Page 96

CONTROLS

Driving

WARNING

Unattended children or animals can cause the vehicle to move and endanger them‐ selves and traffic, for instance due to the fol‐ lowing actions:

▷ Pressing the Start/Stop button.

▷ Releasing the parking brake.

▷ Opening and closing the doors or windows.

▷ Engaging selector lever position N.

▷ Using vehicle equipment.

There is a risk of accidents or injuries. Do not leave children or animals unattended in the ve‐ hicle. Take the remote control with you when exiting and lock the vehicle.◀

Overview

gaged. In these cases, the parking brake is released automatically when you leave the se‐ lector lever position P.

While driving

To use as emergency brake while driving:

Pull the switch and hold it. The vehicle brakes hard while the switch is being pulled.

The indicator light lights up red, a signal sounds and the brake lights light up.

A Check Control message is displayed.

If the vehicle is decelerated to a complete stop, the parking brake is engaged.

Releasing

Releasing manually

Switch on the ignition.

Steptronic transmission: press the switch while the brake is pressed or selec‐ tor lever position P is set.

The LED and indicator light go out.

The parking brake is released.

Parking brake

Setting

With a stationary vehicle

Pull the switch.

The LED lights up.

The indicator light lights up red. The parking brake is set.

Depending on the stopping situation, the park‐ ing brake is engaged automatically.

Steptronic transmission: in some parking situa‐ tions, the parking brake is automatically en‐ gaged, when selector lever position P is en‐

Online Edition for Part no. 01402983594 - X/17

Automatic release in cars with Steptronic transmission

For automatic release, step on the accelerator pedal.

The LED and indicator light go out.

The parking brake is automatically released when you step on the accelerator under the following conditions:

▷ Engine on.

▷ Drive mode engaged.

▷ Driver buckled in and doors closed.

Malfunction

In the event of a failure or malfunction of the parking brake, secure the vehicle against rolling

Page 97

Driving

CONTROLS

using a wheel chock, for instance when leaving it.

After a power failure

Putting the parking brake into operation

1. Switch on the ignition.

It may take several seconds for the brake to be put into operation. Any sounds associated with this are normal.

Press the switch while stepping on the brake pedal or selector lever position P is set.

The indicator light in the instrument cluster goes out as soon as the parking brake is ready for operation.

Turn signal, high beams, headlight flasher

Turn signal

The triple turn signal duration can be adjusted.

Via the Central Information Display (CID):

1. "My MINI"

2. "Vehicle settings"

3. "Lighting"

4. "Exterior lighting"

5. "One-touch turn signal"

6. Select the desired setting.

Settings are stored for the profile currently used.

Signaling briefly

Press the lever to the resistance point and hold it there for as long as you want the turn signal to flash.

Malfunction

Unusually rapid flashing of the indicator light indicates that a turn signal bulb has failed.

High beams, headlight flasher

Push the lever forward or pull it backward.

Using turn signals

Press the lever past the resistance point.

Canada: the lever returns into its starting posi‐ tion after actuation. To switch off manually, slightly tap the lever to the resistance point.

Triple turn signal activation

Lightly tap the lever up or down.

Online Edition for Part no. 01402983594 - X/17

▷ High beams on, arrow 1.

▷ High beams off/headlight flasher, arrow 2.

Washer/wiper system

General information

Do not use the wipers if the windshield is dry, as this may damage the wiper blades or cause them to become worn more quickly.

Page 98

CONTROLS

Driving

Safety information

WARNING

If the wipers start moving in the folded away state, body parts can be jammed or dam‐ age may occur to parts of the vehicle. There is a risk of injury or risk of damage to property. Make sure that the vehicle is switched off when the wipers are in the folded away state and the wipers are folded in when switching on.◀

NOTE

If the wipers are frozen to the windshield, the wiper blades can be torn off and the wiper motor can overheat when switching on. There is a risk of damage to property. Defrost the windshield prior to switching the wipers on.◀

Switching on

Switching off and brief wipe

Press the lever down.

▷ Switching off: press the lever down until it

reaches its standard position.

▷ Brief wipe: press the lever down from the

standard position.

The lever automatically returns to its initial position when released.

Interval mode or rain sensor

Concept

The rain sensor automatically controls the time between wipes depending on the intensity of the rainfall.

Press the lever up until the desired position is reached.

▷ Resting position of the wipers, position 0.

▷ Intermittent operation or rain sensor, posi‐

tion 1.

▷ Normal wiper speed, position 2.

▷ Fast wiper speed, position 3.

When travel is interrupted with the wiper sys‐ tem switched on: when travel continues, the wipers resume at their previous speed.

Online Edition for Part no. 01402983594 - X/17

General information

The sensor is located on the windshield, directly in front of the interior mirror. Without the rain sensor, the frequency of the wiper operation is preset.

Safety information

NOTE

If the rain sensor is activated, the wipers can accidentally start moving in vehicle washes. There is a risk of damage to property. Deacti‐ vate the rain sensor in vehicle washes.◀

Page 99

Driving

CONTROLS

Activating

Press the lever up once from its standard posi‐ tion, arrow 1.

Wiping is started.

The LED in the wiper lever is illuminated.

Deactivating

Press the lever back into the standard position.

Setting the frequency or sensitivity of the rain sensor

Windshield washer system

Safety information

WARNING

The washer fluid can freeze onto the win‐ dow at low temperatures and obstruct the view. There is a risk of an accident. Only use the washer systems, if the washer fluid cannot freeze. Use antifreeze, if needed.◀

NOTE

When the washer fluid reservoir is empty, the wash pump cannot work as intended. There is a risk of damage to property. Do not use the washer system when the washer fluid reservoir is empty.◀

Cleaning the windshield

Turn the thumbwheel to adjust the frequency or sensitivity of the rain sensor.

Up: short interval or high sensitivity of the rain sensor.

Down: long interval or low sensitivity of the rain sensor.

Online Edition for Part no. 01402983594 - X/17

Pull the lever.

The system sprays washer fluid on the wind‐ shield and activates the wipers briefly.

Windshield washer nozzles

The washer jets are automatically heated whenever the ignition is switched on.

Page 100

CONTROLS

Driving

Rear window wiper

Overview

Switching on the rear window wiper

Turn the outer switch upward.

▷ Resting position of the wiper, position 0.

▷ Intermittent mode, arrow 1. When reverse

gear is engaged, the system switches to continuous operation.

Clean the rear window

Turn the outer switch in the desired direction.

▷ In resting position: turn the switch down‐

ward, arrow 3. The switch automatically re‐ turns to its resting position when released.

▷ In intermittent mode: turn the switch fur‐

ther, arrow 2. The switch automatically re‐ turns to its intermittent position when re‐ leased.

Safety information

WARNING

NOTE

Folding away the wipers

Switch the ignition on and off again.

2. Press and hold the wiper level down, until

the wipers stop in a close to vertical posi‐ tion.

Fold-away position of the wipers

Concept

The fold-out position enables the wipers to be folded away from the windshield.

General information

Helpful when changing the wiper blades or un‐ der frosty conditions, for instance.

100

Online Edition for Part no. 01402983594 - X/17

3. Fold the wipers all the way away from the

windshield.