Milton CAT TL1255 User Manual

Specifications

®

Cat

TL1255

Telehandler

Engine

Model Cat® C4.4 EDITAAC
Gross Power (Basic) 105.1 kW 141 hp
Net Power (Basic) 100.6 kW 134.9 hp

• Net Power shown is the power available at the flywheel
when equipped with fan, air cleaner, muffler, and alternator.

Weights

Operating Weight 16 168 kg 35,650 lb

Operating Specifications

Rated Load Capacity 5443 kg 12,000 lb
Maximum Lift Height 16.6 m 54.3 ft
Maximum Forward Reach 13 m 42.5 ft
Frame Leveling 10°
Top Travel Speed 30.4 kph 18.9 mph
Capacity at Max Height (o/r Up) 1814 kg 4,000 lb

Capacity at Max Height (o/r Down) 2268 kg 5,000 lb
Capacity at Max Reach (o/r Up) — —

Capacity at Max Reach (o/r Down) 1587 kg 3,500 lb
Turning Radius over Tires 4.3 m 14 ft

Hydraulic System — Implement

Gear Pump Load sensing piston pump
System Operating Pressure 252 bar 3,650 psi
Auxiliary Hydraulic Pressure 207 bar 3,000 psi
Auxiliary Hydraulic Flow 57 L/min 15 gal/min

at Boom Head

• Auxiliary Hydraulic Circuit used for all attachments equipped
with cylinders or other hydraulic components. Consists of valves,
controls, and hydraulic lines.

Service Refill Capacities

Fuel Tank 144 L 38 gal
Hydraulic System 227.1 L 60 gal

Tires

Standard 17.5 x 25-12 PR
Optional 17.5 x 25 Foam Filled

17.5 x 25 Rock Lug

14.00 x 24 Solid

Boom Performance

Boom Up 15.7 Seconds
Boom Down 13.9 Seconds
Tele In 13.9 Seconds
Tele Out 17.6 Seconds
Drawbar Pull (Loaded) 88.96 kN 20,000 lb

Axles

• Trunnion mounted planetary 55 degree steer axles.

• Integral steer cylinder.

• High bias limited slip differential on front axle.

Brakes

• Service Brakes are inboard wet disc brakes on front and rear axles.

• Parking Brakes are mechanical on front axle.
Light on dash indicates when brake is on.

Instruments

• Volt meter, hourmeter, engine oil pressure gauge, fuel gauge, water
temperature gauge. All gauges protected by clear acrylic cover.

Work Tools

Hydraulic Includes Includes
IT Coupler Auxiliary Electrics Auxiliary Electrics

Pallet Forks (2) 1524 mm, (2) 60 in, 2.36 in x 6 in
60 mm x 152 mm

(2) 1219 mm, (2) 48 in, 2.36 in x 5 in
60 mm x 127 mm

Cubing Forks (2) 1219 mm, (2) 48 in, 2 in x 2 in
51 mm x 51 mm

Standard Tilt 1270 mm 50 in
Carriage

Wide Tilt Carriage 1829 mm 72 in
Standard Rotate 1270 mm 50 in

Carriage
Wide Rotate 1829 mm 72 in

Carriage
Swing Carriage 100°, 1829 mm, 4536 kg 100°, 72 in, 10,000 lb

Capacity, 2268 kg Swung Capacity, 5,000 lb Swung
Side Shift Carriage 1.22 m 48 in
Work Platform

Transmission Speeds

Forward 4 speed
Reverse 3 speed

TL1255 Telehandler

5.5 m (28 ft)

9.7 m (32 ft)

10.9 m (36 ft)

12.1 m (40 ft)

13.4 m (44 ft)

14.6 m (48 ft)

15.8 m (52 ft)

17.0 m (56 ft)

7.3 m (24 ft)

6.1 m (20 ft)

4.9 m (16 ft)

3.7 m (12 ft)

2.4 m (8 ft)

1.2 m (4 ft)

0 m (0 ft)

-1.2 m (-4 ft)

3.7 m
(12 ft)

4.9 m
(16 ft)

6.1 m
(20 ft)

7.3 m
(24 ft)

8.5 m
(28 ft)

9.7 m
(32 ft)

10.9 m
(36 ft)

12.1 m

(40 ft)

13.4 m
(44 ft)

14.6 m
(48 ft)

2.4 m
(8 ft)

1.2 m
(4 ft)

0 m

(0 ft)

A

C

E

B

D

F

H

G

0°

-4°

10°

20°

30°

40°

50°

60°

71°

3628 kg (8,000 lb)

5443 kg (12,000 lb)

1587 kg (3,500 lb)

1814 kg (4,000 lb)

2267 kg (5,000 lb)

2722 kg (6,000 lb)

4536 kg (10,000 lb)

TL1255

TL1255

A

C

E

B

D

F

H

G

8.5 m (28 ft)

9.7 m (32 ft)

10.9 m (36 ft)

12.1 m (40 ft)

13.4 m (44 ft)

14.6 m (48 ft)

15.8 m (52 ft)

17.0 m (56 ft)

24 ft (24 ft)

7.3 m (20 ft)

4.9 m (16 ft)

3.7 m (12 ft)

2.4 m (8 ft)

1.2 m (4 ft)

0 m (0 ft)

-1.2 (-4 ft)

3.7 m
(12 ft)

4.9 m
(16 ft)

6.1 m
(20 ft)

7.3 m

(24 ft)

8.5 m

(28 ft)

9.7 m
(32 ft)

10.9 m
(36 ft)

12.1 m
(40 ft)

13.4 m
(44 ft)

14.6 m
(48 ft)

2.4 m
(8 ft)

1.2 m
(4 ft)

0 m

(0 ft)

0°

-4°

10°

20°

30°

40°

50°

60°

71°

1814 kg (4,000 lb)

2722 kg (6,000 lb)

3628 kg (8,000 lb)

5443 kg (12,000 lb)

4536 kg (10,000 lb)

500 lb (227 kg)

454 kg (1,000 lb)

907 kg (2,000 lb)

1361 kg (3,000 lb)

TL1255

TL1255

Dimensions

All dimensions are approximate.

2.56 m (101 in)

94 in. (2.38 m)

483 mm (19 in)

16.4 in. (416 mm)

95.5 in. (2.41 m)

2.56 m (101 in)

Load Chart and Dimensions

OUTRIGGERS DOWN OUTRIGGERS UP

17.0 m (56 ft)

15.8 m (52 ft)

14.6 m (48 ft)

13.4 m (44 ft)

12.1 m (40 ft)

10.9 m (36 ft)

9.7 m (32 ft)

5.5 m (28 ft)

7.3 m (24 ft)

6.1 m (20 ft)

4.9 m (16 ft)

3.7 m (12 ft)

2.4 m (8 ft)

1.2 m (4 ft)

0 m (0 ft)

-1.2 m (-4 ft)

14.6 m
(48 ft)

10°

0°

-4°

13.4 m
(44 ft)

20°

12.1 m
(40 ft)

30°

50°

40°

1814 kg (4,000 lb)

1587 kg (3,500 lb)

2267 kg (5,000 lb)

8.5 m

9.7 m

10.9 m
(28 ft)

(32 ft)

(36 ft)

60°

2722 kg (6,000 lb)

6.1 m

7.3 m
(20 ft)

(24 ft)

71°

5443 kg (12,000 lb)

3628 kg (8,000 lb)

4536 kg (10,000 lb)

3.7 m

4.9 m

2.4 m

(12 ft)

(16 ft)

(8 ft)

H

G

F

E

D

C

B

A

TL1255

1.2 m

0 m

(4 ft)

(0 ft)

TL1255

128 in. (3.25 m)

3.66 m (144 in)

221.6 in. (6.33 m)

6.33 m (249 in)

17.0 m (56 ft)

15.8 m (52 ft)

14.6 m (48 ft)

13.4 m (44 ft)

12.1 m (40 ft)

10.9 m (36 ft)

9.7 m (32 ft)

8.5 m (28 ft)

24 ft (24 ft)

7.3 m (20 ft)

4.9 m (16 ft)

3.7 m (12 ft)

2.4 m (8 ft)

1.2 m (4 ft)

0 m (0 ft)

-1.2 (-4 ft)

14.6 m
(48 ft)

10°

0°

-4°

13.4 m
(44 ft)

20°

12.1 m
(40 ft)

TL1255

30°

500 lb (227 kg)

10.9 m
(36 ft)

40°

454 kg (1,000 lb)

8.5 m

9.7 m
(28 ft)

(32 ft)

50°

907 kg (2,000 lb)

1361 kg (3,000 lb)

6.1 m

7.3 m
(20 ft)

(24 ft)

71°

60°

3628 kg (8,000 lb)

2722 kg (6,000 lb)

4536 kg (10,000 lb)

1814 kg (4,000 lb)

3.7 m

4.9 m
(12 ft)

(16 ft)

H

G

F

E

D

C

5443 kg (12,000 lb)

2.4 m

1.2 m

0 m

(8 ft)

(4 ft)

(0 ft)

B

A

TL1255

TL1255

IMPORTANT

Rated lift capacities shown

are with machine equipped

with carriage and pallet
forks. The machine must be
level on a firm surface with
undamaged, properly inflated
tires. Machine specifications

and stability are based on rated

lift capacities at specific boom

angles and boom lengths.

For more complete information on Cat products, dealer services, and industry solut iions, visit us on the web at
www.cat .com

© 2010 Caterpillar
Printed in U.S.A.
All rights reserved.

CAT, CATERPILL AR, their respective logos, “Caterpillar Yellow” and the POWER EDGE trade dress, as well as
corporate and product identity used herein, are trademarks of C aterpillar and may not be used without permission.

(If specifications are critical, the
proposed application should be
discussed with your dealer.)

DO NOT exceed rated lift capacity
loads, as unstable and dangerous
machine conditions will result.

DO NOT tip the machine forward to
determine the allowable load.

Use only JLG approved

attachments with proper material

handler model/attachment
load capacity charts displayed
in the operator’s cab. OSHA
requires all rough terrain forklift

operators be trained according

to OSHA 29 CFR 1910.178 (1).

Due to continuous product
improvements, machine
specifications and/or equipment
changes may be made without prior
notification. This machine meets or
exceeds ANSI/ITSDF B56.6-2005
as originally manufactured
for intended applications.

AEHQ5842-07 (03-2010)