Milton CAT 65E User Manual

Pictured with optional equipment

110 HP
16,800 LBS
10' or 12' BLADE

Built From A Lineage Of Market Leaders For Over 50 Years

53" Circle With “A” Frame Drawbar

Full Power Shift Transmission With Torque Converter

Torque Proportioning Rear Differential

65E

TURBO

|

Motor Grader

Operating Weight

• Front 4,700 lb

• Rear 12,100 lb

• Total 16,800 lb

Engine

• Make/Model Cummins QSB4.5

• Type 4 Cycle, turbo diesel

• No. of cylinders 4

• Displacement 275 cu. in.

• Horsepower 110

• Rated speed 2,200 rpm

Brakes

• Service – 4 wheel, wet disc & self adjusting

• Independent tandem by tandem system

• Mechanical parking brake

Axles

• Front axle clearance – 20.3"

• Rear axle – torque proportioning differential

Transmission

• Full power shift with torque converter

• 6 speeds forward – top speed 24 mph

• Electronic shift control

• LCD message center

• Shift inhibit system

Circle

• 53" diameter gear driven circle

• Supported on 4 guides with wear plates

• Shim adjustable

• 360º rotation

• Hydraulic circle side shift

Moldboard/Blade

• “Rollaway” blade with end bits

• Replaceable cutting edges

• Size – 10' x 16.63" x 0.63"

• Lift above ground – 15.4"

• Maximum penetration – 20"

BIG GRADER FEATURES IN A SMALL PACKAGE

OPTIONAL EQUIPMENT

• Cab, includes
– Cloth seat – air suspension
– Defroster fans (2)
– F & R wipers/washers
– Heater, 40,000 BTU
– Inside mirror
– Sliding rear window
– Sound suppression
– Tinted glass

• Cold weather starting aid (ether)

• Dozer – 8' x 2', with skid plates

• Factory air conditioner

• Float control valves, (3)

• Floodlights, (2) F & (2) R

• Mirrors, rearview – external, (2)

• Moldboard – 12' wide

• Moldboard extensions

• Moldboard pitch, hydraulic

• Rear ripper – 75" wide, 3 shanks

• Scarifier – 41" wide, 9 teeth

• Strobe light

• 90º bank slope saddle

21' 7"

15' 6"

9' 10"

The information contained in this brochure is intended to be of general nature only. The manufacturer may at any
time and from time to time, for technical or other necessary reasons, modify any of the details or specifications of
the product described in this brochure. Illustrations do not necessarily show products in standard condition. The
dimensions, weights and capacities shown herein, as well as any conversion data used, are approximate only and
are subject to variations within normal manufacturing techniques. To be sure of getting accurate, detailed and
up-to-date information, any intending buyer should contact NorAm.

Illustration includes optional equipment

STANDARD EQUIPMENT

• Accelerator/decelerator and hand throttle

• Alternator – 100 Amp.

• Articulated frame

• Back-up alarm

• Batteries (2) – 12 volt

• Controls, hydraulic
– Articulation
– Circle side shift
– Circle turn
– Moldboard lift/lower
– Moldboard side shift
– Wheel lean

• Control console, adjustable

• Drawbar

• Engine side panels

• Gauges
– Air cleaner service indicator
– Engine coolant temperature
– Engine oil pressure
– Fuel level
– Hourmeter
– Transmission LCD message center
– Transmission oil temperature
– Voltmeter

• Horn, electric

• Implement control lever lock

• Light package
– Front headlights (2) – hi/lo beam
– Front worklights (2)
– Turn signals, stop and tail lights

• Master electrical switch

• Mechanical parking brake

• Muffler, horizontal under hood

• Moldboard – 10' wide

• Moldboard pitch, manual

• ROPS Canopy with
– Dome light
– Floormat
– Glove box
– Grab handles
– Headliner
– Inside mirror
– Seat belt

• Seat, vinyl – deluxe air suspension

• Steps, right and left

• Tires – 15.00 x 19.5 (8PR) G2 tubeless

• Valve eight station

• Vandalism protection

7' 8"

Full power shift transmission with

torque converter

53" gear driven circle with

“A” frame allows 360º blade rotation

Deluxe cab

Dozer blade

Scarifier

90º Bank slope saddle

65E

TURBO

|

Motor Grader

USA Heritage

Since 1949

Printed in the U.S.A. NS0205

NorAm Construction Equipment
1250 W. Northwest Hwy., # 504
Palatine, IL 60067
847-934-6565