Page 1
416E
®
Backhoe Loader
Engine
Engine Model Cat® C4.4 DITA
Gross Power @ 2,200 rpm – SAE J1995 71 kW 96 hp
Net Power @ 2,200 rpm – SAE J1349 65 kW 87 hp
Net Peak Power @ 2,000 rpm – SAE J1349 66 kW 89 hp
Weights
Operating Weight – Nominal 6750 kg 14,881 lb
Operating Weight – Maximum 10 200 kg 22,466 lb
Backhoe
Dig Depth – Standard 4360 mm 14 ft 4 in
Dig Depth – Extended 5456 mm 17 ft 11 in
Page 2
416E Features
World-Class Cab
Standard air suspension seat, ergonomic controls
layout and more visibility make you feel comfortable
– for a safer, more productive work day.
Load-Sensing Hydraulics
Variable displacement piston pump and flow
sharing hydraulic valves provide smooth control
and optimized fuel efficiency.
Improved Power Train
Top travel speed of 40 km/h/25 mph so you can
get on and off the site faster.
Optional Features
Ride Control and AccuGrade™ can improve
operator comfort and productivity.
Contents
Operator Station ..................................................3
Hydraulics ............................................................4
Ride Control..........................................................4
Power Train ..........................................................5
Backhoe................................................................6
Loader ...................................................................6
Technology Products ..........................................7
Work Tools ............................................................8
Serviceability .......................................................9
Customer Support ...............................................9
416E Backhoe Loader Specifications ............10
416E Standard Equipment ................................18
416E Optional Equipment .................................19
2
The 416E lets you get more done with less effort in a
more comfortable operator station, with a serviceable
extendible stick design and increased performance.
Page 3
Operator Station
Comfort, visibility and style.
Experience a whole new level of comfort with the spacious E-Series operator station. The ergonomic,
automotive style enhances the operator environment. A narrow front dash provides excellent visibility
to the front bucket. Reduced vibration keeps operator fatigue low. In-cab storage compartment and
lockable tool and battery box provides ample space for tools and belongings. The operator station
also features an easy-to-read gauge cluster.
Air Suspension Seat
The standard air suspension seat is adjustable for a greater operating range and more comfortable
ride. A switch allows the seat to be tailored to support differing body weights. Adjustable seat height
accommodates all operators.
Improved Air Conditioning
The improved air conditioning system features enhanced air distribution and performance for a more
comfortable work environment. A nearly 20% increase in air ow over the D-Series combined with
improved louver locations provide superior operator comfort.
Backhoe Controls
Two mechanical control patterns are available: two lever excavator, and two lever backhoe.
Configurations
The 416E operator station is available in 5 options – ROPS Canopy, ROPS Canopy Plus, Utility Cab,
Utility Cab Plus and Utility Cab Plus with Air Conditioning. See Standard and Optional Equipment
for details.
3
Page 4
Hydraulics
Load-sensing system matches power to demand.
The 416E has a load-sensing, closed center hydraulic system,
which closely matches power and ow to the demand needed
by the implements. So whether you’re in full trenching mode,
or delicately digging around services, you are in control.
In applications such as production trenching, speed is important
and the system will match the ow needed to get the job done
quickly and efciently. The load-sensing hydraulic system
also delivers:
A cooler hydraulic system•
Better fuel efciency•
Quieter operation•
Reduced wear on components•
Cat XT™-3 ES ToughGuard™ hoses combined with Cat
couplings and O-ring face seal ttings provide a leak-free
system. The 416E also features new ow-sharing hydraulic
valves, ensuring proportional ow of oil to all hydraulic
cylinders, providing greater control and improving multifunction performance.
Ride Control
Delivers even greater
operator comfort.
The optional Ride Control System smoothes the ride in
all conditions, including load and carry, highway roading,
or simply moving around the job site. It reduces machine
loping, providing a smooth and stable ride for increased
operator comfort and reduced operator fatigue. The Ride
Control option improves material retention in the loader
bucket for increased productivity and a cleaner job site.
The system is easily engaged by an On/Off switch on
the front console.
4
Page 5
Power Train
Built for performance, power, reliability and fuel efficiency.
Cat Engine
The 416E features the Cat® C4.4 DITA (Direct Injection
Turbocharged Aftercooled) engine and meets all U.S. EPA
Tier 3/EU Stage IIIa emissions requirements. Horsepower and
torque rise deliver strong loading and roading performance.
The water separator service indicator ensures the •
operator is alerted when service is necessary.
Dry-type axial seal air cleaner with automatic, integrated •
dust ejection system for more efcient pre-separation.
Both air cleaner and precleaner functions are incorporated
into a single unit mounted under the hood.
Transmission
The Cat standard power shuttle transmission provides four
speeds forward and reverse. Hydraulically shifted clutches
allow on-the-go direction and travel speed shifts.
Hydraulic proportional control valves smooth speed •
and directional shifts.
Four Wheel Drive (4WD) option improves mobility •
and loader performance in poor underfoot and can
be activated on-the-go.
Maximum roading speed of 40 km/h (25 mph) for faster •
travel between job sites.
Cat Rear Axles are designed specically for demanding •
backhoe loader applications. Axles feature outboard
planetary gear sets for easy serviceability and brake
design improvements for longer service life.
Brake Mode Selector
The brake mode selector switch has three positions: two
wheel drive, two wheel drive with all wheel braking and four
wheel drive. Two wheel drive with all wheel braking provides
better tire life while roading and engages the front axle when
brakes are applied for improved braking performance.
5
Page 6
Backhoe
Designed for high performance and easy service.
The E-Series backhoe delivers industry-leading digging forces. Serrated edges
on the stick provide improved material clamping for clearing and demolition
applications. The single pin bucket linkage contributes to best-in-class rotation
of 205 degrees for all applications.
E-Stick Design
The optional extendible stick (E-stick) increases reach and dig depth by approximately
1.2 meters (4 feet). The new design delivers increased life and easy in-eld adjustment
with common hand tools.
Curved Boom
The excavator-style boom is built for optimum performance and durability.
The curved design provides additional clearance over obstacles while digging
a trench or truck loading. The narrow boom enhances the viewing area to the
bucket and trench throughout the entire operating range.
Thumbs
Thumb mounting provisions are standard on every Cat Backhoe Loader for
added machine versatility. Hydraulic thumbs are available factory-installed.
Mechanical thumbs are available through your Cat Dealer.
Loader
Strong lift
and breakout.
Single Tilt
The standard single tilt loader
linkage on the 416E features
strong lift and breakout forces for
solid performance in backlling
and truck loading applications.
The 416E is equipped with either
a general purpose or multi-purpose
pin-on bucket to meet your
specic needs.
Return-to-Dig
The return-to-dig system reduces
loading cycle times by bringing
the loader bucket back to the dig
position with an easy pull of the
lever. By the time the loader bucket
is at ground level, the bucket is
angled correctly for the next load
or cut.
6
Page 7
Technology Products
Advanced technologies improve productivity and simplify serviceability.
AccuGrade™ System
The AccuGrade system for backhoe loaders improves digging
accuracy and site safety by eliminating the need for manual
grade measuring. Both the Site and Laser Reference Systems
save time and money in a variety of digging and trenching
applications.
Site Reference System
The Site Reference System allows the operator to excavate
to pre-determined coordinates. The intuitive software and
controls allow the operator to set target grades.
An in-cab display allows the operator to enter slope and dig
depth parameters. Easy to read grade indicator and elevation
display delivers all system information to the cab for easy
viewing by the operator. System includes rugged components
built to withstand the harshest environments:
In-cab display•
Cylinder position sensors•
Swing position sensor•
Inclinometer•
Wiring harnesses•
Laser Reference System
The Laser Reference System works with laser transmitters to
accurately grade or excavate to a site plan without the use of
grade stakes. The Laser System includes all the components
of the Site Reference System with the addition of the
following:
Laser receiver•
Electric mast and mount•
Laser wiring harness•
Note: Laser transmitter and tripod sold separately
Product Link
Product Link uses GPS technology to provide machine
data, including service hours, location, events and diagnostic
information, to you through a web-based application or
e-mail/pager notication.
7
Page 8
Work Tools
Do more jobs with one machine.
Backhoe Work Tools
A large selection of backhoe tools – including a new
hydraulic thumb – gives you the exibility to serve more
customers, more protably.
Standard Duty, Heavy Duty, Heavy Duty Rock, Pin •
Lock, Soil Excavation, Coral and Ditch Cleaning Buckets
Cold Planer•
Hydraulic Hammer•
Auger•
Ripper•
Mechanical and Hydraulic Thumbs•
Quick Coupler•
Vibratory Plate Compactor•
Loader Work Tools
The loader tool line includes the following:
General Purpose Bucket•
Multi Purpose Bucket•
Side Dump Bucket•
Light Material Bucket•
Loader Forks•
The right bucket makes all the difference
To get top performance from your Cat backhoe loader, be
sure your machine is equipped with the proper bucket and
tips. The soil excavation bucket provides the best productivity
in most conditions.
DRS 230 (Diagonal Retention System)
Heavy-duty bucket teeth are attached with diagonal pins
rather than horizontal pins for easy exchange.
8
Page 9
Serviceability
Easy access and minimal maintenance requirements maximize uptime.
Convenient service features make maintenance easy, reducing
your downtime.
Tilt-up hood provides convenient access to all engine •
check points.
Fill caps are color-coded for quick identication.•
SM
S•O•S•
you avoid unscheduled repairs.
Caterpillar is committed to providing you with a safe •
work environment. For more information please visit
SAFETY.CAT.COM™.
, Coolant Sampling and Technical Analysis help
Customer Support
Makes the difference.
Your Cat dealer is ready to assist you with your purchase
decision and everything after.
Financing packages are exible to meet your needs.•
Your Cat dealer can evaluate the cost to repair, •
rebuild and replace your machine, so you can make
the right choice.
Nearly all parts are available at your Cat dealer •
parts counter.
See your dealer’s website or www.cat.com to customize •
the machine that is right for you using the Build and
Quote applications. Also nd information on other
Cat products, dealer services and industry solutions.
9
Page 10
416E Backhoe Loader Specifications
Engine
Engine Model
(Standard)
Gross Power
– SAE J1995
Gross Power
– ISO 14396
Net Power
– SAE J1349
Net Power
– ISO 9249
Net Power
– EEC 80/1269
Net Peak Power
@ 2,000 rpm
– SAE J1349
Net Peak Power
@ 2,000 rpm
– ISO 9249
Net Peak Power
@ 2,000 rpm
– EEC 80/1269
Bore 105 mm 4.13 in
Stroke 127 mm 5 in
Displacement 4.4 L 268 in
Net Torque Rise
@ 1,400 rpm
– Standard
Net Peak Torque
@ 1,400 rpm
– Standard
– SAE J1349
Engine meets all U.S. EPA Tier 3/•
EU Stage IIIa emissions requirements.
The net power ratings apply at 2,200 rpm •
when tested under the specied conditions
for the specied standard.
Net power advertised is the power available •
at the ywheel when the engine is equipped
with fan, air cleaner, mufer and alternator.
Based on standard air conditions of •
25° C (77° F) and 99 kPa (29.32 in)
in dry barometer.
Used 35° API gravity fuel having an LHV •
of 42 780 kJ/kg (18,390 BTU/lb) when used
at 30° C (89° F) (reference a fuel density
of 838.9 g/L [7.001 lb/gal]).
No derating required up to 3000 m •
(9,843 ft).
Net torque rise meets SAE J1349.•
Net peak power ratings apply at conditions •
specied above.
Cat® C4.4 DITA
71 kW 96 hp
70 kW 94 hp
65 kW 87 hp
66 kW 88 hp
66 kW 88 hp
66 kW 89 hp
67 kW 90 hp
67 kW 90 hp
35%
384 N·m 283 lb ft
Weights
Operating Weight
– Nominal
Operating Weight
– Maximum
Cab, ROPS/FOPS 260 kg 573 lb
Ride Control 25 kg 55 lb
Air Conditioning 39 kg 86 lb
Four Wheel Drive 155 kg 342 lb
Extendible Stick
(no weights)
Counterweights
(Option 1)
Counterweights
(Option 2)
Counterweights
(Option 3)
Total gross machine weight not to exceed •
10 200 kg (22,466 lb).
3
6750 kg 14,881 lb
10 200 kg 22,466 lb
299 kg 659 lb
116 kg 255 lb
231 kg 510 lb
488 kg 1,075 lb
Backhoe
Dig Depth
– Standard
E-Stick Retracted 4402 mm 14 ft 5 in
E-Stick Extended 5456 mm 17 ft 11 in
Reach from Swing
Pivot – Standard
E-Stick Retracted 5657 mm 18 ft 7 in
E-Stick Extended 6666 mm 21 ft 10 in
Bucket Rotation 205 Degrees
Bucket Dig Force
– Standard
E-Stick Retracted 51.5 kN 11,491 lb
E-Stick Extended 51.5 kN 11,491 lb
Stick Dig Force
– Standard
E-Stick Retracted 32 kN 7,200 lb
E-Stick Extended 23.5 kN 5,250 lb
Stick Lift @
2440 mm (8 ft)
– Standard
E-Stick Retracted 2063 kg 4,539 lb
E-Stick Extended 1290 kg 2,839 lb
Loading Height
– Standard
E-Stick Retracted 3600 mm 11 ft 9 in
E-Stick Extended 4170 mm 13 ft 7 in
Loading Reach
– Standard
E-Stick Retracted 1923 mm 6 ft 2 in
E-Stick Extended 2836 mm 9 ft 1 in
4360 mm 14 ft 4 in
5618 mm 18 ft 5 in
52.2 kN 11,749 lb
32 kN 7,200 lb
2275 kg 5,005 lb
3643 mm 11 ft 11 in
1837 mm 6 ft 0 in
10
Page 11
Loader
Bucket Capacity
– General Purpose
Bucket Width
– General Purpose
Dump Height
@ Max Angle
– Single Tilt
Dump Reach
@ Max Angle
– Single Tilt
Dig Depth
– Single Tilt
Lift Capacity
@ Full Height
– Single Tilt
Bucket Breakout
Force – Single Tilt
3
0.76 m
2262 mm 7 ft 5 in
2651 mm 8 ft 8 in
772 mm 2 ft 6 in
106 mm 4 in
2803 kg 6,180 lb
44.6 kN 10,036 lb
1 yd
3
Hydraulic System
Circuit Type Closed center, load
sensing
Pump Capacity
(@ 2,200 rpm)
System Pressure
– Backhoe
System Pressure
– Loader
Pump Type Variable-ow, axial
Steering Type Front wheel
Power Steering Hydrostatic, HMU
2WD Cylinder
– Bore
Stroke 120 mm 4.7 in
Rod Diameter 36 mm 1.4 in
4WD Cylinder
– Bore
Stroke 120 mm 4.7 in
Rod Diameter 36 mm 1.4 in
Brake System Inboard, oil-immersed,
132 L/min 34.8 gal/min
22 700 kPa 3,300 psi
20 700 kPa 3,000 psi
piston
65 mm 2.6 in
65 mm 2.6 in
multiple disc
Power Train
Power-Shuttle,
Forward 1st
Forward 2nd 9.6 km/h 5.9 mph
Forward 3rd 20 km/h 12 mph
Forward 4th 40 km/h 25 mph
Power-Shuttle,
Reverse 1st
Reverse 2nd 9.6 km/h 5.9 mph
Reverse 3rd 20 km/h 12 mph
Reverse 4th 40 km/h 25 mph
Conveniently placed, hand operated lever •
provides instant direction changes between
forward and reverse through power hydraulic
clutches.
Torque converter free-wheel clutch allows •
the converter stator to free-wheel during
high speed, low torque conditions such
as roading.
Single-stage, 2.63:1 stall ratio.•
Travel speeds of two wheel drive backhoe •
loader at full throttle when equipped with
19.5 × 24 rear tires.
6 km/h 3.7 mph
6 km/h 3.7 mph
Operating Specifications
– Backhoe
Turning Circle:
outside, front wheels
Turning Circle:
outside, widest
loading bucket
ISO 5010.•
2WD, 4WD (inner wheel not braked).•
8.18 m 26 ft 10 in
10.97 m 36 ft
Service Refills
Cooling System 20.5 L 5.4 gal
Fuel Tank 170 L 45 gal
Engine Oil w/Filter 7.6 L 2 gal
Transmission-Torque
Converter, 2WD,
Power Shuttle
Transmission-Torque
Converter, 4WD,
Power Shuttle
Rear Axle 16.5 L 4.4 gal
Rear Axle,
Planetaries
Front Axle, 4WD 11 L 2.9 gal
Front Axle,
Planetaries
Hydraulic System 90 L 23.8 gal
Hydraulic Tank 38 L 10 gal
18.5 L 4.9 gal
18.5 L 4.9 gal
1.7 L 0.4 gal
0.7 L 0.2 gal
Standards
Brakes SAE J/ISO 3450, ISO
3450 1996
Cab – ROPS
Cab – FOPS SAE J/ISO 3449
Cab – Sound ANSI/SAE J1166
Exterior Sound SAE J88 JUN86 is
SAE J1040 May 1994/
ISO 3741 1994
APR98 LEVEL II
and ISO 3449: 1992
LEVEL II
Oct 98 is 80 dB (A)
76 dB (A)
11
Page 12
416E Backhoe Loader Specifications
Axle Ratings
Front Axle, 2WD,
Static
Dynamic 9186 kg 20,233 lb
Front Axle, 4WD,
Static
Dynamic 9186 kg 20,233 lb
Rear Axle, Static 22 964 kg 50,582 lb
Dynamic 9186 kg 20,233 lb
Axle Oscillation 10 Degrees
4WD and 2WD axles are pendulum mounted •
and permanently sealed and lubricated,
requiring no daily maintenance. Also features
double-acting steering cylinder with 52°
steering angle for increased maneuverability.
22 964 kg 50,582 lb
22 964 kg 50,582 lb
Engine Features
Three-ring pistons made of lightweight, •
silicon/aluminum alloy for strength and
maximum thermal conductivity.
Forged chrome/molybdenum-steel •
crankshaft with salt bath nitrocarburized
pins and journals.
Front and rear crankshaft oil seals are “lip” •
type Viton and PTFE designs featuring an
integral dust lip.
For durability, inlet valves are nitrided, •
martensitic chrome silicon steel, while
exhaust valves are nitrided, austenitic
chrome manganese-nickel steel.
Cylinder block is high strength, cast iron •
alloy of deep skirt, monobloc design for
increased strength and long life.
Cylinder head is high strength, cast iron •
alloy construction with extra duty wall and
deck thickness. Intake and exhaust ports are
precision cast to promote optimum gas ow.
Direct injection fuel system provides •
accurate fuel delivery and efciency.
Dry-type axial seal air cleaner with integral •
precleaner, automatic dust ejection system,
and lter condition indicator.
Direct electric, 12-volt starting and •
charging system with 880 CCA Group 31
maintenance free battery.
Standard glow plug starting aid system •
for efcient cold weather starting.
High contact ratio/gear train, peripheral •
xed isolation top cover and open deck
block design reduce bare engine noise.
Higher low end torque for better engine/•
machine performance.
Tires
Choices listed as combination
of front/rear tires:
11L-16 (12 ply) F-3/19.5L-24 (12 ply) •
R4 ATU
12.5/80-18 NHS (12 ply) 1-3 Super •
Traction/19.5L-24 (12 ply) R4 ATU
12.5/80-18 NHS (12 ply) 1-3 Super •
Traction/21L-24 (16 ply) R4 ATU
340/80R 18 XMCL/500/70R 24 XMCL•
340/80R 18 XMCL/19.5L-R24 (12 ply) •
R4 ATU
Brakes
Features:
Brakes meet the following standards: •
SAE J1473 and ISO 3450 requirements.
Self-adjusting, completely enclosed •
and sealed.
Foot operated brake pedals can be •
interlocked for roading.
Parking/secondary brakes are independent •
of the service brake system. Parking brake is
mechanically applied through an adjustable
hand lever located on the right console.
12
Page 13
Counterweights
M inimum Counterweight Recommendations
Standard Stick
Loader Bucket Power Train kg lb
GP 2WD 231 510
GP 4WD 116 255
MP 2WD/4WD no counterweight
Extendible Stick
Loader Bucket Power Train kg lb
GP 2WD/4WD 488 1,075
GP 2WD 231 510
MP 4WD 116 255
Backhoe Buckets
With weld on adapters and pin-on teeth
Standard Duty
Width Rated Capacity W eight
No. of
Teeth
mm in L ft
3
kg lb
305 12 78 2.8 97 213 3
457 18 118 4.2 115 253 4
610 24 175 6.2 132 290 5
762 30 233 8.2 147 323 5
914 36 292 10.3 165 363 6
Heavy Duty
Width Rated Capacity W eight
No. of
Teeth
mm in L ft
3
kg lb
305 12 78 2.8 105 231 3
406 16 105 3.7 128 282 3
457 18 118 4.2 129 284 4
610 24 175 6.2 151 332 5
762 30 233 8.2 167 367 5
914 36 292 10.3 189 416 6
Soil Excavation
Width Rated Capacity W eight
No. of
Teeth
mm in L ft
3
kg lb
457 18 181 6.4 153 336 4
610 24 241 8.5 179 395 5
762 30 320 11.3 197 434 5
914 36 380 13.4 223 491 6
Heavy Duty Rock
Width Rated Capacity W eight
No. of
Teeth
mm in L ft
3
kg lb
305 12 70 2.5 120 265 3
457 18 127
4.5
150 331 4
610 24 198 7.0 175 386 5
762 30 255 9.5 195 430 5
914 36 311 11.5 210 463 6
Coral
Width Rated Capacity W eight
No. of
Teeth
mm in L ft
3
kg lb
305 12 60 2.1 134 295 4
457 18 100 3.5 155 341 6
610 24 140 4.9 182 402 8
762 30 190 6.7 210 463 10
13
Page 14
416E Backhoe Loader Specifications
M achine Dimensions
Single-Tilt Loader
General Purpose
(0.76 m
3
/1.0 yd3)
General Purpose
(0.96 m
3
/1.25 yd3)
Multi Purpose
(1.0 m3/1.3 yd3)
mm ft/in mm ft/in mm ft/in
(1)
Overall transport length 7233 23 ft 9 in 7321 24 ft 0 in 7285 23 ft 11 in
Overall length (loader on ground) 7180 23 ft 7 in 7293 23 ft 11 in 7209 23 ft 8 in
(2)
Overall transport height (standard stick) 3577 11 ft 9 in 3577 11 ft 9 in 3577 11 ft 9 in
Overall transport height (extendible stick) 3631 11 ft 11 in 3631 11 ft 11 in 3631 11 ft 11 in
Overall width 2322 7 ft 7 in 2322 7 ft 7 in 2322 7 ft 7 in
(3)
Height to top of cab/canopy 2819 9 ft 3 in 2819 9 ft 3 in 2819 9 ft 3 in
(4)
Height to top of exhaust stack 2754 9 ft 0 in 2754 9 ft 0 in 2754 9 ft 0 in
Height to loader hinge pin (transport) 365 1 ft 2 in 365 1 ft 2 in 417 1 ft 4 in
Ground clearance (minimum) 320 1 ft 1 in 320 1 ft 1 in 320 1 ft 1 in
(5)
R ear axle centerline to front grill 2704 8 ft 10 in 2704 8 ft 10 in 2704 8 ft 10 in
Front wheel tread gauge 1880 6 ft 2 in 1880 6 ft 2 in 1880 6 ft 2 in
R ear wheel tread gauge 1727 5 ft 8 in 1727 5 ft 8 in 1727 5 ft 8 in
(6)
W heelbase 2WD/4WD 2200 7 ft 3 in 2200 7 ft 3 in 2200 7 ft 3 in
Loader Bucket Dimensions and Performance
Single-Tilt Loader
General Purpose
(0.76 m
3
/1.0 yd3)
General Purpose
(0.96 m
3
/1.25 yd3)
Multi Purpose
(1.0 m3/1.3 yd3)
Capacity (SAE rated) 0.76 m
3
1.0 yd
3
0.96 m
3
1.25 yd
3
1.0 m
3
1.3 yd
3
W idth 2262 mm 7 ft 5 in 2262 mm 7 ft 5 in 2279 mm 7 ft 6 in
Lift capacity at maximum height 2547 kg 5,615 lb 2427 kg 5,351 lb 2225 kg 4,905 lb
Breakout force 40.9 kN 9,185 lb 38.1 kN 8,565 lb 37.2 kN 8,363 lb
(7)
Maximum hinge pin height 3296 mm 10 ft 10 in 3296 mm 10 ft 10 in 3296 mm 10 ft 10 in
(8)
Dump angle at full height 44° 44° 44°
Dump height at maximum angle 2651 mm 8 ft 8 in 2573 mm 8 ft 5 in 2624 mm 8 ft 7 in
(9)
Dump reach
at maximum angle 772 mm 2 ft 6 in 853 mm 2 ft 10 in 761 mm 2 ft 6 in
(10)
Maximum bucket rollback at ground l
evel 39° 39° 40°
(11)
Digging depth 106 mm 4 in 106 mm 4 in 133 mm 5 in
Maximum grading angle 110° 107° 110°
W idth of dozer cutting edge N/A N/A 2262 mm 7 ft 5 in
(12)
Grill to bucket cutting edge, carry position 1428 mm 4 ft 8 in 1516 mm 5 ft 0 in 1480 mm 4 ft 10 in
(13)
Maximum operating height 4063 mm 13 ft 4 in 4196 mm 13 ft 9 in 4244 mm 13 ft 11 in
Jaw opening maximum N/A N/A 790 mm 2 ft 7 in
Bucket jaw clamping force N/A N/A 50.6 kN 11,385 lb
W eight (does not include teeth or forks) 384 kg 847 lb 451 kg 994 lb 745 kg 1,642 lb
14
Page 15
Backhoe Dimensions and Performance
Standard Stick
Extendible Stick Retracted Extendible Stick Extended
(14)
Digging depth, SAE (max.) 4360 mm 14 ft 4 in 4402 mm 14 ft 5 in 5456 mm 17 ft 11 in
(15)
Digging depth, 610 mm (2 ft) at bottom 4321 mm 14 ft 2 in 4363 mm 14 ft 4 in 5420 mm 17 ft 10 in
R each from rear axle centerline at ground line 6721 mm 22 ft 1 in 6760 mm 22 ft 2 in 7769 mm 25 ft 6 in
(16)
R each from swing pivot at ground line 5618 mm 18 ft 5 in 5657 mm 18 ft 7 in 6666 mm 21 ft 10 in
Maximum operating height 5523 mm 18 ft 1 in 5555 mm 18 ft 3 in 6302 mm 20 ft 8 in
L oading height 3636 mm 11 ft 11 in 3577 mm 11 ft 9 in 4145 mm 13 ft 7 in
(17)
L oading reach 1768 mm 5 ft 10 in 1868 mm 6 ft 2 in 2771 mm 9 ft 1 in
S wing arc 180° 180° 180°
Bucket rotation 205° 205° 205°
(18)
Stabilizer spread, operating position (center) 3310 mm 10 ft 10 in 3310 mm 10 ft 10 in 3310 mm 10 ft 10 in
(19)
Stabilizer spread, operating position (outside) 3770 mm 12 ft 4 in 3770 mm 12 ft 4 in 3770 mm 12 ft 4 in
Stabilizer spread, transport position 2322 mm 7 ft 7 in 2322 mm 7 ft 7 in 2322 mm 7 ft 7 in
Bucket dig force 51.8 kN 11,655 lb 51.1 kN 11,491 lb 51.1 kN 11,491 lb
Stick dig force 31.8 kN 7,151 lb 31.8 kN 7,151 lb 23.4 kN 5,250 lb
Dimensions and performance specifi cations shown are for machines equipped with 12.5/80-18 SGL front tires, 19.5L-24 IT525 rear tires, ROPS canopy, standard stick with
610 mm (24 inch) standard-duty bucket, and 0.76 m3 (1.0 yd3) loader bucket and standard equipment unless otherwise specifi ed.
Single Tilt Loader
15
Page 16
416E Backhoe Loader Specifications
Backhoe Lift Capacity
Cat 416E Standard Stick
Boom Lifting kg lb m ft
1
1262 2,776
2
1378 3,031
3
1394 3,066
4
1356 2,984
5
1306 2,873
6
1253 2,757
7
1202 2,643
8
1153 2,536
9
1107 2,436
10
1065 2,344
11
1028 2,261
12
995 2,190
13
972 2,138
14
973 2,141
15
1081 2,377
Stick Lifting kg lb
16
1297 2,853
17
1827 4,020
18
2195 4,828
19
2275 5,005
m
20
2645 5,818
ft
21
5285 11,627
Cat 416E Extendible Stick – Retracted
Boom Lifting kg lb m ft
1
1084 2,385
2
1186 2,608
3
1190 2,618
4
1149 2,527
5
1096 2,412
6
1042 2,291
7
988 2,174
8
938 2,063
9
890 1,958
10
846 1,860
11
805 1,771
12
768 1,690
13
738 1,623
14
722 1,589
15
788 1,734
Stick Lifting kg lb
16
1155 2,541
17
1672 3,679
18
1992 4,382
19
2063 4,539
m
20
2395 5,269
ft
21
4688 10,313
22
5059 11,129
Lift capacities are over-end values. Machine equipped with 4WD, OROPS, 0.76 m3 (1.0 yd3) general purpose bucket, and 116 kg (255 lb) counterweight.
Extendible stick includes 488 kg (1,075 lb) counterweight.
20
18
16
14
12
10
8
6
4
2
0
–2
–4
–6
–8
–10
–12
–14
–16
6
5
4
3
2
1
0
–1
–2
–3
–4
–5
22 20 18 16 14 12 10 86420–2
6543210–1
20
18
16
14
12
10
8
6
4
2
0
–2
–4
–6
–8
–10
–12
–14
–16
6
5
4
3
2
1
0
–1
–2
–3
–4
–5
22 20 18 16 14 12 10 86420–2
6543210–1
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
1
2
3
4
5
6
7
8
9
10
11
12
13
14
10
15
16
17
18
17
19
20
21
16
17
18
17
19
20
21
22
16
Page 17
Backhoe Lift Capacity
Cat 416E Extendible Stick – Extended
Boom Lifting kg lb m ft
1
597 1,313
2
729 1,605
3
780 1,715
4
725 1,596
5
681 1,498
6
659 1,449
7
653 1,437
8
663 1,458
9
687 1,512
10
672 1,478
11
651 1,432
12
632 1,390
13
616 1,354
14
604 1,328
15
600 1,319
16
613 1,348
17
704 1,550
18
1071 2,355
Stick Lifting kg lb
19
543 1,195
m
20
724 1,593
21
973 2,141
ft
22
1146 2,522
23
1290 2,839
24
1442 3,172
25
1653 3,637
26
2160 4,751
27
5031 11,069
Lift capacities are over-end values. Machine equipped with 4WD, OROPS, 0.76 m3 (1.0 yd3) general purpose bucket, and 116 kg (255 lb) counterweight.
Extendible stick includes 488 kg (1,075 lb) counterweight.
20
18
16
14
12
10
8
6
4
2
0
–2
–4
–6
–8
–10
–12
–14
–16
6
5
4
3
2
1
0
–1
–2
–3
–4
–5
22 20 18 16 14 12 10 86420–2
6543210–1
2
1
3
4
5
6
7
8
9
10
11
12
13
14
16
17
18
15
20
19
21
22
23
24
25
26
27
17
Page 18
416E Standard Equipment
Standard equipment may vary. Consult your Caterpillar dealer for details.
Air cleaner
Alarm, back-up
Backhoe position footrests
Backhoe controls, 2-lever mechanical
backhoe pattern
Battery, maintenance-free, 880 CCA
Battery disconnect switch
Boom transport lock
Brace, lift cylinder
Brake, secondary parking
Brakes, oil disc, dual pedals, interlocking
Bucket level indicator
Canopy, ROPS/FOPS
Coat hook
Coolant/Antifreeze, extended life
Counterweight, bumper
Differential lock
Dome light (cab only)
Engine, Cat
(Direct Injection Turbocharged
and Aftercooled)
Engine enclosure
Face seals, O-ring
Fan, suction and guard
®
C4.4 DITA
Fast reversing shuttle, all gears
Fenders, rear
Filters, spin-on: fuel, engine oil,
transmission oil, water separator,
hydraulic uid
Flashing hazard/signal lights
Floor mat
Gauges: coolant temperature, fuel level,
tachometer, hour meter, torque converter
oil temperature
Ground level fuel ll
High ambient cooling package
Hydraulic hose, XT™-3 ES
Hydraulic oil cooler
Indicators: air cleaner service, water
separator service, brake on, engine
coolant, hydraulic oil level sight gauge,
oil pressure
Instrument panel lights
Key start/stop system
Lights, working (2 front, 2 rear)
Loader, self-leveling, return-to-dig
and transmission disconnect switch
Lunch box holder
Mirror, rear view
Open circuit breather
Power receptacle, 12V, internal
and external
Power steering, hydrostatic
Rubber impact strips on radiator guard
Seat belt, retractable (51 mm/2 in)
Stabilizer shoes, grouser type
Seat, air suspension with armrest
Stabilizer controls, cable operated
Starting system, glow plugs
Storage compartment, internal
Stop and tail lights
Swing transport lock
Tilt steering wheel
Tires, see page 12
Toolbox, external, lockable
Torque converter
Throttles, hand and foot
Transmission, four speed, syncromesh
Transmission neutralizer switch
Transport tie-downs
Warning horn, electric
18
Page 19
Optional equipment may vary. Consult your Caterpillar dealer for details.
kg lb kg lb kg lb
AccuGrade™ Site
Reference System for
Backhoe Loaders
AccuGrade Laser
Reference System for
Backhoe Loaders
Attachments, backhoe
Mechanical Quick
Coupler
D and E-Series
buckets
C-Series buckets 75 165
D, E and Deere
buckets
D, E and Case buckets 80 176
Hydraulic thumb 139-157 306-345
Attachments,
front loader
General purpose
buckets
3
(1.0 yd3) 385 847
0.76 m
3
(1.25 yd3) 452 994
0.96 m
Multi purpose buckets
3
(1.3 yd3) 714 1,571
1.0 m
3
(1.3 yd3)
1.0 m
w/ forks
Axle, front
Four wheel drive with
driveshaft guard
19 42
48 105
75 165
75 165
884 1,945
155 341
Backhoe Controls
Excavator pattern 0 0
Battery, additional,
880 CCA
Cab, utility 210 462
Cab, utility plus 220 484
Cab, utility plus
with A/C
Canopy Plus, ROPS 15 33
Coolant, additional
protection, –50° C
(–58° F)
Counterweights
116 kg (255 lb) 116 255
231 kg (510 lb) 231 510
488 kg (1,075 lb) 488 1,075
Cutting edge, bolt-on,
two piece
Fenders, 4WD, front 12 26
Fenders, rear extensions 1 2
Guards
Boom protection plate 18 39
Stabilizer, rock 31 68
Hydraulic valves, loader
(3rd valve for MP)
Hydraulic valves,
backhoe
5th Function 5 11
6th Function 5 11
25 55
258 568
0 0
70 154
27 59
416E Optional Equipment
Hydraulic lines
Combo, Std Stick 27 59
Combo, E-Stick 27 59
One-way, E-Stick 22 48
Lights: Working,
additional (2 front,
2 rear)
Product Link 4 9
Ride Control 22 48
Rotating beacon
Magnetic mount 5 11
Seat belt, 75 mm (3 in) 0 0
Stabilizers, available
with guards
Street 37 81
Reversible 38 84
Sticks
Extendible 299 659
Teeth, loader bucket 45 99
Vandalism protection
Gauge cover 1 2
Padlocks 1 2
Hood lock 0 0
0 0
19
Page 20
416E Backhoe Loader
For more complete information on Cat products, dealer services, and industry solutions,
visit us on the web at www.cat.com
© 2008 Caterpillar Inc.
All rights reserved
Materials and specifications are subject to change without notice. Featured machines in may
include additional equipment. See your Caterpillar dealer for available options.
CAT, CATERPILLAR, SAFETY.CAT.COM, their respective logos, “Caterpillar Yellow” and
the POWER EDGE trade dress, as well as corporate and product identity used herein,
are trademarks of Caterpillar and may not be used without permission.
20
AEHQ6025 (12-2008)
Replaces AEHQ5684-02
Loading...