Miele S 8340, S 8530, S 8540, S 8360, S 8560 Descriptive Technical Documentation

...

0 (0)

Descriptive Technical Documentation

- Model-dependent -

DTD no. 41-8000

Model(s): S 8310, S 8330, S 8340, S 8360,

S 8390, S 8510, S 8530, S 8540, S 8560, S 8590, S 8510 UniQ, S 8530 UniQ, S 8540 UniQ, S 8560 UniQ, S 8590 UniQ, S 8710, S 8730, S 8790, S 8930, S 8960

Contents

General Information

A Warning and Safety Instructions

B Modification History

C Technical Data

Function Groups

010 Base

4 Service. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 010-2

4.1 Caster (Dynamic Drive) Removal . . . . . . . . . . . . . . . . . . . . . . . . . 010-2

4.2 Parking Slot Removal. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 010-2

4.3 Lighting Assembly Replacement (Uniq Only). . . . . . . . . . . . . . . . 010-3

020 Cover Frame

4 Service. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 020-2

4.1 Bag Holder Replacement. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 020-2

4.2 Cover Frame Removal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 020-3

030 Dust Compartment Lid

4 Service. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 030-2

4.1 Accessory Compartment Lid Removal . . . . . . . . . . . . . . . . . . . . . 030-2

4.2 Dust Compartment Lid Removal. . . . . . . . . . . . . . . . . . . . . . . . . . 030-2

4.3 Dust Channel Assembly Removal . . . . . . . . . . . . . . . . . . . . . . . . 030-3

4.4 Bag Change Indicator Removal . . . . . . . . . . . . . . . . . . . . . . . . . . 030-4

4.5 Hinge Socket Wiring Harness Removal . . . . . . . . . . . . . . . . . . . . 030-4

040 Operating Unit

2 Function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 040-2

2.1 Operating Units: S 83xx to S 89xx . . . . . . . . . . . . . . . . . . . . . . . . 040-2

2.1.1 S 83xx Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 040-2

2.1.2 S 85xx Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 040-2

2.1.3 S 87xx Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 040-3

2.1.4 S 89xx Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 040-4

2.2 Automatic Suction Power Control . . . . . . . . . . . . . . . . . . . . . . . . . 040-5

3 Fault Repair . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 040-6

3.1 Motor Does Not React in the "Automatic" Setting or Always

Runs at High Speed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 040-6

4 Service. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 040-8

4.1 Operating Unit Removal. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 040-8

Descriptive Technical Documentation

DTD no. 41-8000 1

4.2 Electronic Board Removal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 040-9

4.3 On/Off Switch Removal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 040-10

4.4 Powerbrush Outlet Wiring Harness Removal. . . . . . . . . . . . . . . . 040-10

4.5 Park Switch Replacement (Model-Dependent) . . . . . . . . . . . . . . 040-10

050 Motor, Cord Reel

2 Function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 050-2

2.1 Thermal Protection Function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 050-2

3 Fault Repair . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 050-3

3.1 Suction Power Too Low . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 050-3

3.2 Motor Does Not Run . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 050-4

4 Service. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 050-6

4.1 Motor/Cord Reel Cover Removal . . . . . . . . . . . . . . . . . . . . . . . . . 050-6

4.2 Motor Replacement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 050-6

4.3 Cord Reel Replacement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 050-7

4.4 Pre-Motor Filter Frame Removal . . . . . . . . . . . . . . . . . . . . . . . . . . 050-7

060 Suction Hose, Handle (S 83xx)

3 Fault Repair . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 060-2

3.1 LEDs in LED Handle Do Not Light . . . . . . . . . . . . . . . . . . . . . . . . 060-2

4 Service. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 060-3

4.1 Telescopic Suction Hose Locking Piece Replacement . . . . . . . . 060-3

4.2 Pushbutton Replacement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 060-3

4.3 LED Handle Battery Replacement (Model-Dependent) . . . . . . . 060-4

061 Radio-Controlled Suction Hose (S 87xx)

3 Fault Repair . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 061-2

3.1 Radio-Controlled Handle Not Functioning . . . . . . . . . . . . . . . . . . 061-2

4 Service. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 061-3

4.1 Battery in Radio-Controlled Handle Replacement (Model-

Dependent). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 061-3

Descriptive Technical Documentation

2 DTD no. 41-8000

A Warning and Safety Instructions

1 General Information

All repairs should be performed by a trained technician in strict accordance with national, state and local codes. Any repairs or maintenance performed by unqualified personnel could be dangerous.

When servicing, modifying, testing or maintaining appliances, all applicable laws, regulations and accident prevention guidelines must be observed.

All regulations of the appropriate utility supply companies and standards relating to safety (not limited to electrical safety) are to be complied with.

Before starting any service work, disconnect the vacuum cleaner from power.

Even with the vacuum cleaner switched off, voltage may be applied to some components.

After work has been completed, a visual as well as an operational check should always be performed.

Descriptive Technical Documentation

DTD no. 41-8000 A-1

B Modification History

When? Who? What?

20.04.2012 Reinhard Bremehr – Initial compilation

Descriptive Technical Documentation

DTD no. 41-8000 B-1

C Technical Data

Model Operating controls Motor/Exhaust filter Version

S 8 3: +/- foot switches 1: Power + AirClean 0

5: +/- foot switch with Automatic 2: Power + Active AirClean

7: Radio-controlled handle 3: Power + Active HEPA

9: Electro handle 4: Efficiency + AirClean

5: Efficiency + Active AirClean

6: Efficiency + Active HEPA 7

7: Silence + AirClean

8: Silence + Active AirClean

9: Silence + Active HEPA

Table 1

Descriptions of various features

Easylock

Telescopic suction hose that can be secured with a special clip.

Thermo indicator

Indicator light that lights up when the thermal motor protection has tripped (motor will restart after it has cooled).

Park System

Suction hose can be stored in the rear slot on the vacuum during short breaks.

Dynamic Drive Shock-mounted rubber casters.

Silence Plus

Additional plastic casing for the motor plus AirTeQ floor nozzle attachment.

Table 2: Descriptions of Various Features

Motor versions

Power 2200 W High-power motor

Efficiency 1200 W Economical motor

Silence 1200 W

Especially quiet motor (71 dB(A) re 1pW in combination with the AirTeQ floor nozzle and an AAC (Active AirClean) filter

Table 3

Model

S 8380 Cat &

Dog

S 8390 Calima

S 8390 Kona

S 8390

HomeCare

S 8590 Alize S 8590 Marin S 8990 UniQ

Color Koi orange

Canary

yellow

Obsidian

black

Mango red Ivory white

Navy blue

metallic

Mahogany

brown

metallic

Powerful Vortex Motor™, manufactured by Miele

Low noise,

1200-watt

Low noise,

1200-watt

Low noise,

1200-watt

Low noise,

1200-watt

Low noise,

1200-watt

Low noise,

1200-watt

Low noise,

1200-watt

Descriptive Technical Documentation

DTD no. 41-8000 C-1

Model

S 8380 Cat &

Dog

S 8390 Calima

S 8390 Kona

S 8390

HomeCare

S 8590 Alize S 8590 Marin S 8990 UniQ

Power adjustment

+/- foot switch +/- foot switch +/- foot switch +/- foot switch +/- foot switch +/- foot switch

Handle

controls

Number of power settings

6 6 6 6 6 6 6

Motor protection function with safety shutoff

Yes Yes Yes Yes Yes Yes Yes

Motor protection indicator

No No No No Yes Yes Yes

AirClean Sealed System™ construction

Yes Yes Yes Yes Yes Yes Yes

AirClean FilterBag™

Type G/N,

4.76 quart

Type G/N,

4.76 quart

Type G/N,

4.76 quart

Type G/N,

4.76 quart

Type G/N,

4.76 quart

Type G/N,

4.76 quart

Type G/N,

4.76 quart

FilterBag™ change indicator

Yes Yes Yes Yes Yes Yes Yes

Air Clean filter

Optional Optional Optional Optional Optional Optional Optional

Active Air Clean filter

Standard Optional Optional Optional Optional Optional Optional

Active HEPA filter

Optional Optional Standard Standard Standard Standard Standard

Pre-motor filter

Yes Yes Yes Yes Yes Yes Yes

Filter replacement indicator

No No No No Yes Yes Yes

Lightweight skeleton construction

Yes Yes Yes Yes Yes Yes Yes

Rear park system for short breaks

Yes Yes Yes Yes Yes Yes Yes

Automatic standby switch in rear park position

No No No No Yes Yes Yes

Side park system for storage

Yes Yes Yes Yes Yes Yes Illuminated

Long electrical cord with automatic rewind

One-touch One-touch One-touch One-touch One-touch One-touch One-touch

Cleaning radius

33' 36' 36' 36' 36' 36' 36'

Bumper strip Yes Yes Yes Yes Yes Yes Velvet

360° caster wheels for high maneuverability

Yes Yes Yes Yes

Dynamic

Drive

Yes Yes

Descriptive Technical Documentation

C-2 DTD no. 41-8000

Model

S 8380 Cat &

Dog

S 8390 Calima

S 8390 Kona

S 8390

HomeCare

S 8590 Alize S 8590 Marin S 8990 UniQ

Telescopic stainlesssteel wand

Yes Yes Yes Yes Yes Yes Yes

Durable hose

Straight

suction

Straight

suction

Straight

suction

Electric Electric Electric Electric

Deluxe handle grip with electrobrush control

No No Yes Yes Yes Yes Yes

Suction controls via handle

No No No No No No Yes

Standard floor tool

Handheld

Turbobrush

(STB101), ElectroPlus (SEB 228),

Parquet

Twister (SBB

300-3)

TurboComfort

(STB 205-3),

Parquet

Twister (SBB

300-3)

ElectroPlus

(SEB 228),

Parquet

Twister (SBB

300-3)

Classic

Combination

floor tool

(SBD 285-3)

AirTeQ

Combination

floor tool

(SBD 650-3)

Parquet

Twister (SBB

300-3)

Parquet

Twister (SBB

300-3),

ElectroPremi-

um (SEB

236)

Optional electrobrushes

ElectroComfort (SEB 217-

3), ElectroPlus (SEB 228),

ElectroPremi-

um (SEB

236)

ElectroComf-

ort (SEB 217-

3),

ElectroPlus

(SEB 228),

ElectroPremi-

um (SEB

236)

Dusting brush Integrated Integrated Integrated Integrated Integrated Integrated Integrated

Upholstery tool

Integrated Integrated Integrated Integrated Integrated Integrated Integrated

Crevice nozzle

Integrated Integrated Integrated Integrated Integrated Integrated Integrated

Additional accessories

Flexible

crevice

nozzle (SFD

20), universal brush (SUB

20)

Spotlight

handle

Table 4: Technical Data

Descriptive Technical Documentation

DTD no. 41-8000 C-3

010 Base

Descriptive Technical Documentation

DTD no. 41-8000 010-1

4 Service

4.1 Caster (Dynamic Drive) Removal

A Using a flathead screwdriver, lever the wheel out of the caster, then lever the

caster out of the base (010 Fig. 1).

A To reinstall, press the caster back into the base until it clicks, then press the

wheel into the caster until it clicks.

Fig. 1: Caster Removal

4.2 Parking Slot Removal

A Cover Frame Removal, 020 4.2.

A Remove the T20 screw securing the appropriate parking slot (010 Fig. 2, Pos.

3).

Descriptive Technical Documentation

010-2 DTD no. 41-8000

4.3 Lighting Assembly Replacement (Uniq Only)

A Cover Frame Removal, 020 4.2.

A Remove the bumper strip (010 Fig. 2, Pos. 2).

A Remove the T20 screws securing the parking slots on either side of the base

(010 Fig. 2, Pos. 3).

A Disconnect the lighting assembly wiring harness (010 Fig. 2, Pos. 5) from the

electronic board.

A Remove each parking slot together with the lighting assembly (010 Fig. 2,

Pos. 4).

Fig. 2

Note

The lighting assembly can only be replaced in its entirety.

A Reinstall by following these instructions in reverse order.

Descriptive Technical Documentation

DTD no. 41-8000 010-3

020 Cover Frame

Descriptive Technical Documentation

DTD no. 41-8000 020-1

4 Service

4.1 Bag Holder Replacement

Fig. 1: Bag Holder

A Open the dust compartment lid.

A Take out the dustbag.

A Hold the bag holder (020 Fig. 1, Pos. 2) with one hand and carefully unsnap it

from the hinge pins (020 Fig. 1, Pos. 1).

Warning!

Only do this procedure by hand. Using a screwdriver or other tool will break the bag holder.

Descriptive Technical Documentation

020-2 DTD no. 41-8000

+ 29 hidden pages