Page 1
Fully Integrated
36” Bottom Mount
KF 1913 Vi / KF 1903 Vi
Specification Sheets TRS 08052016
8mieleusa.com
Page 2
Fully Integrated 36” Bottom Mount
KF 1913 Vi / KF 1903 Vi
SPECIFICATIONS
F 1903 Vi — Item 37190301USA - Right Hinged
F 1913 Vi — Item 37191301USA - Left Hinged
Overall Unit Width 35
Overall Unit Height 83
Overall Unit Depth 24” (610 mm)
Niche
Minimum Cabinet Opening Width
Minimum Cabinet Opening Height 83
Minimum Cabinet Opening Depth 25” (635 mm)*
Plumbing
Water Supply Requirements
Water Connection Line
Electrical
Electrical Requirements - Volts/Amps
Features:
• MasterCool controls
• ClearView lighting system
• Drop and Lock Shelves
• SmartFresh storage drawers
• FullView storage drawers
• Ice maker
• RemoteVision capable
• Acoustic door and temperature
alarm
• Optical door and temperature
alarm
• Energy Star
Power Cord - Plug and length NEMA 5-15 plug, 5 ft (1.52 m)
Custom Panel
Maximum Panel Weight
Maximum Panel Thickness 1
Minimum Panel Thickness
Shipping
Shipping Weight 511.6 lbs (232 kg)
Shipping Dimensions 39
Support
Call Miele 800.843.7231
Miele Website
20/20 Link
Please note:
This specication sheet is for a single built-in unit.
When combining multiple MasterCool units side-by-side, please refer to the Merging Kit
specication sheet.
3
/4” (908 mm)
1
/2” - 853/16” (2121 mm - 2165 mm)
36” (915 mm)
5
/8” (2124 mm)
Connect to a cold water supply only. Must
be connected to a shut-off valve. The water
shut-off valve must be accessible after
installation. The water pressure must be
between 25 psi (1.7 bar) and may not exceed
80 psi (5.5 bar). If the pressure is higher than
80 psi (5.5 bar), a pressure reducing valve
must be installed.
Standard 1/4” O.D flexible water line. The
maximum outer diameter of the water pipe
(without fittings): 3/8” (10 mm). Water line is
not included.
110V / 120V, 60Hz, 15 Amps
In the case of side-by-side installations,
a separate outlet must be used for each
appliance.
Please refer to the manual for further
details.
Upper door - 84 lbs (38 kg)
Lower door - 31 lbs (14 kg)
1
/2” (38 mm)
3
/4” (19 mm)
1
/2” W x 8913/16” H x 291/4” D
8www.mieleusa.com
82020technologies.com
KF 1913 Vi / KF 1903 Vi
Specification Sheets TRS 08052016
Page 2 of 9
Page 3
Fully Integrated 36” Bottom Mount
KF 1913 Vi / KF 1903 Vi
FOR FLUSH INSTALLATION
* Niche depth assumes a 3/4” (19 mm) panel, please
adjust according to custom panel thickness
KF 1913 Vi / KF 1903 Vi
Page 3 of 9
Specification Sheets TRS 08052016
Page 4
Fully Integrated 36” Bottom Mount
KF 1913 Vi / KF 1903 Vi
POWER SUPPLY AND WATER CONNECTION
BACK VIEW
Electrical - 5 foot (1.52 m) - 120 Volt - 15 Amp - NEMA 5-15 molded plug
Water line - 1/4” exible water line - not included
SS DOOR PANEL DIMENSIONS
(Available as an accessory)
353/4” (908 mm)
/64” (1348 mm)
5
Water connection is located in front of unit.
1/4” compression tting is needed.
/16”
3
4” - 5
/16” (672 mm) 53
7
26
(102 - 132 mm)
KF 1913 Vi / KF 1903 Vi
Page 4 of 9
Specification Sheets TRS 08052016
Page 5
Upper Door
29 11/16"
29 1/8 - 29 1/2"
Hinge
Hinge
Lower Drawer
1/2" - 2 3/8"
Fully Integrated 36” Bottom Mount
KF 1913 Vi / KF 1903 Vi
LOWER HINGE LOCATION
29 11/16”
(740 - 749 mm)
29 1/8” - 29 1/2”
(754 mm)
1/2” - 2 3/8”
(13 - 60 mm)
KF 1913 Vi / KF 1903 Vi
Page 5 of 9
Specification Sheets TRS 08052016
Page 6
Fully Integrated 36” Bottom Mount
appearance
These units do not come equipped with a front panel. They are designed to accept a custom door panel supplied by
the
cabinets
Panel
Upper Panel Note
If
Find
KF 1913 Vi / KF 1903 Vi
CUSTOM PANEL INSTALLATIONS
cabinet maker. Miele has a unique panel integration system which allows the panels to align with the surrounding
.
size is determined in the following manner:
Upper Panel
Lower Panel
Panel Height
HOM
Width: 35 3/4" in all cases
Thickness: Minumum 3/4" outside frame
Standard Upper Panel Height: 53 5/16"
Notes: Finish back side of panels to insure
Panel may extend above unit. This is not
considered in height calculation
Upper Maximum panel weight: 83.8 Pounds
Lower Panel Height: Use the following calculation:
Panel Height = HOM - 53 9/16 - TKH
35 3/4” (908 mm) in all cases
Minimum 3/4” (19 mm) outside frame
53 5/16” (1354 mm)
HOM - 53 9/16” (1360.5 mm) - TKH
84 Pounds
the adjoining cabinets are taller than the height of machine (HOM) - the upper panel may be extended accordingly.
the difference between height of the adjoining cabinets and the height of machine (HOM) and add to 53 5/16"
Adjoining cabinet
Panel "B" Height
TKH
s
Extended Panel Example:
Machine
Ajoining cabinet height: 87"
Height of machine: 84"
Difference: 3"
Extended panel height:56 5/16"
HOM =Total height of machine. Can be adjusted to
TKH =Toe-kick height (2" - 8 3/8")
Lower Maximum panel weight:31 Pounds
TKH =
Lower Maximum panel weight: 31 Pounds
Total height of machine. Can be adjusted
to match adjoining cabinets - typically 84”
match adjoining cabinets - typically 84"
(2133 mm).
HOM is adjustable between 83 1/2" - 85 3/8"
HOM is adjustable between 83 1/2” -
85 3/16” (2121 mm - 2165 mm)
Toe-kick height 2” - 8 3/8” (51 - 212 mm)
87” (2210 mm)
84” (2133 mm)
3” (76 mm)
56 5/16” (1430 mm)
KF 1913 Vi / KF 1903 Vi
Specification Sheets TRS 08052016
Page 6 of 9
Page 7
Fully Integrated 36” Bottom Mount
rooD °511rooD °09
T
Door
KF 1913 Vi / KF 1903 Vi
HINGING DETAILS
Swing
1-1/4” (32 mm)
1-1/2” (38 mm)
1-3/4” (44 mm)
2” (51 mm)
1-1/4"
1-1/2"
1-3/4"
2"
1-1/4” (32 mm)
1-1/2” (38 mm)
0-3/4” (19 mm)
1” (25 mm)
0-3/4"
1"
Cabinet Front
0-3/4” (19 mm)
1” (25 mm)
1-1/4"
1-1/2"
7/16” (11 mm)
7/16"
Cabinet Front
1"
1-1/4"
0-1/8"
0-1/8” (3 mm)
0-3/4"
F
ro
nt
Pa
n
el
snoitpo ssenkcihTsnoitpo ssenkcih
0-1/8"
0-1/8” (3 mm)
0-3/4” (19 mm)
1-1/4” (32 mm)
1-1/2” (38 mm)
1-3/4” (44 mm)
1” (25 mm)
0-3/4"
1-1/4"
1-3/4"
1-1/2"
1"
0-3/4” (19 mm)
1” (25 mm)
1-1/4” (32 mm)
1-1/2” (38 mm)
0-3/4"
Front Panel
1"
Door Swing
11 3/4”
(298 mm)
16 7/8"
Max
MAX
1-1/2"
/16” (982 mm)
38 11/16"
11
38
NOTE: Additional space needed depending on
thickness of front panels and handle used
NOTE: Additional space needed depending on
thickness of front panels and handle used
KF 1913 Vi / KF 1903 Vi
Page 7 of 9
Specification Sheets TRS 08052016
Page 8
Fully Integrated 36” Bottom Mount
0-3/4"
1"
1-1/4"
1-1/2"
0-1/8"
F
ro
nt
Pa
n
el
0-3/4"
1-1/4"
1-1/2"
1-3/4"
1"
Cabinet Front
rooD °511rooD °09
snoitpo ssenkcihTsnoitpo ssenkcihT
KF 1913 Vi / KF 1903 Vi
HINGING DETAILS
115o OPENING
1-1/4” (32 mm)
1-1/2” (38 mm)
1-3/4” (44 mm)
0-3/4” (19 mm)
1” (25 mm)
0-3/4” (19 mm)
2-5/8”
(67mm)
2-5/8”
(67mm)
2-1/3” (59mm)
2-1/3” (59mm)
2-1/24”(52mm)
2-1/24”(52mm)
1-3/8”(35mm)
1-3/8”(35mm)
1-1/6”
1-1/6”
17/24” (18mm)
17/24” (18mm)
(29.6mm)
(29.6mm)
1/4”(6.4mm)
1/4”(6.4mm)
1-3/4”(44.5mm)
1-3/4”(44.5mm)
3”(76.2mm)
3”(76.2mm)
0-1/8” (3 mm)
1” (25 mm)
1-1/4” (32 mm)
1-1/2” (38 mm)
KF 1913 Vi / KF 1903 Vi
Specification Sheets TRS 08052016
Page 8 of 9
Page 9
Fully Integrated 36” Bottom Mount
0-1/8"
Front Panel
1"
1-1/4"
1-1/2"
0-3/4"
0-3/4"
1-1/4"
1-1/2"
1-3/4"
2"
1"
Cabinet Front
0-3/4"
1"
1-1/4"
1-1/2"
F
ro
nt
Pa
n
el
0-3/4"
1-1/4"
1-1/2"
1-3/4"
1"
Cabinet Front
snoitpo ssenkcihTsnoitpo ssenkcihT
KF 1913 Vi / KF 1903 Vi
HINGING DETAILS
90o OPEING
1-3/4” (44 mm)
2” (51 mm)
Handle or object that is
NOT ush with Cabinet
Front.
1-1/4” (32 mm)
1-1/2” (38 mm)
0-3/4” (19 mm)
1” (25 mm)
0-3/4” (19 mm)
1” (25 mm)
1-1/4” (32 mm)
1-1/2” (38 mm)
1-7/16”
(36.5mm)
1-11/16”
(43mm)
1-15/16”
(49.2mm)
1-3/16”
(30mm)
7/16”
(11 mm)
0-1/8” (3 mm)
When installing hinge side next to an appliance or object that is within range of the door panel,
limit the door opening angle to 90o. This is done by installing the banking pin as illustrated.
Insert the banking pin through the holes and drive in with a hammer.
KF 1913 Vi / KF 1903 Vi
Specification Sheets TRS 08052016
Page 9 of 9
Loading...