Page 1
Product and Cut-out Dimensions
KF1911Vi / KF1901Vi
25" min.
O
36"
W
84"
35 3/4"
24"
UNIT ACCEPTS
TWO (2) CUSTOM
FRONT P ANELS
Location Codes
5 foot - 120 Volt - 15 Amp 3-wire molded plug power
E -
supply connects lower left rear.
Standard NEMA 5-15 Outlet - locate less than 9" above
O -
finished floor
1/4" flexible water line - tape to floor
W -
Notes
• All Installations must be done in accordance with local codes
• Sides of adjoining cabinets should be filled (flush to frame) to
insure proper fit and finish
E
83 1/2" - 85 3/8"
9 1/2"
1 1/4"
4 1/8"
2" - 8 3/8"
6 5/8" - 8 1/2"
NOTE: Drawing is not to scale.
SPECIFICATION SHEETS 011208
Page 2
Product and Cut-out Dimensions
KF1911Vi / KF1901Vi
Lower hinge location
Hinge
Upper Door
Lower Drawer
Hinge
29 11/16"
29 1/8 - 29 1/2"
1/2" - 2 3/8"
NOTE: Drawing is not to scale.
SPECIFICATION SHEETS 011208
Page 3
Front Panel Information
Fully Integrated Model
Custom Panel Installations
These units do not come equipped with a front panel. They are designed to accept a custom door panel supplied by
the cabinet maker. Miele has a unique panel integration system which allows the panels to align with the surrounding
cabinets.
Panel size is determined in the following manner:
Width: 35 3/4" in all cases
Thickness: Minumum 3/4" outside frame
Standard Upper Panel Height: 53 5/16"
Notes: Finish back side of panels to insure appearance
Panel may extend above unit. This is not
considered in height calculation
Upper Panel
HOM
Panel Height
Maximum hinge capacity: 200 Pounds
Maximum panel weight: 70 Pounds
Lower Panel Height: Use the following calculation:
Lower Panel
Panel "B" Height
TKH
Panel Height = HOM - 53 9/16 - TKH
HOM = Total height of machine. Can be adjusted to
match adjoining cabinets - typically 84"
HOM is adjustable between 83 1/2" - 85 3/8"
TKH = Toe-kick height (2" - 8 3/8")
Maximum panel weight: 31 Pounds
Upper Panel Notes
If the adjoining cabinets are taller than the height of machine (HOM) - the upper panel may be extended accordingly.
Find the difference between height of the adjoining cabinets and the height of machine (HOM) and add to 53 5/16"
Adjoining cabinet
Extended Panel Example:
Machine
Ajoining cabinet height: 87"
Height of machine: 84"
Difference: 3"
Extended panel height: 56 5/16"
NOTE: Drawing is not to scale.
SPECIFICATION SHEETS 011208
Page 4
Front Panel Information
Hinging Details
90° Door 115° Door
Thickness options Thickness options
Door Swing
0-1/8"
0-3/4"
1-1/4"
1-1/2"
0-3/4"
1-1/4"
1-1/2"
1-3/4"
1"
2"
Cabinet Front
0-3/4"
Front Panel
1"
1-1/4"
1-1/2"
1-3/4"
1"
Cabinet Front
0-3/4"
F
ro
n
t
1"
P
1-1/4"
1-1/2"
a
n
e
l
0-1/8"
Door Swing
7/16"
16 7/8"
MAX
38 11/16"
NOTE: Additional space needed depending on
thickness of front panels and handle used
NOTE: Additional space needed depending on
thickness of front panels and handle used
NOTE: Drawing is not to scale.
SPECIFICATION SHEETS 011208
Loading...